10G installation - isql*plus service in 'starting' status after instalation
I am installing Oracle 10G rel. 10.2.0.1.0 in a fresh formatted system on win 2003 enterp. edition. SP1.
In the installtion at 99% stage after setup is done it throws pop-up that : "isqlplusscv : failed to start the service, Error , the operation completed successfully".
Installation seems to have finished successfully but,I see in services.msc that isqlplus* service is in "starting" mode and i have tried all possible ways to start the service manually, setting ORACLE_HOME, ORACLE_SID env. variables thru cmd and manually also with all sets of permutaions and combinations.But still 'OraclePSI102ISQL*Plus' service is in 'starting' status only.
Even tried uninstalling oracle with all proper registry deletions in a proper procedure and re-installed 10G.Still at the same 99% stage it throws same pop-up, and all the above condition is same.
Could anyone help resolving this?
Edited by: Saandip Bakchu SAP on Apr 19, 2009 10:09 AM
Hi Baran,
We cannot stop the service. We ignored this and continued the installation of Central and Database instance and it was completed
Thanks.
Similar Messages
-
Not able to start isql*plus service
hello,
My problem is that I am not able to start isql*plus service,its continuosly showng "starting.." status but doesnt start.In the event viewer there is an error of isql*plus service which says
The description for Event ID ( 11 ) in Source ( iSQL*Plus Application Server ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: 1056, An instance of the service is already running.
Please help me resolving this problem
The database is Oracle 10g r2 10.2.0.1.0.
ThanxEnsure that your iSQL service is running..
which OS you use? -
ISQL*PLUS service can't start
Hello,
I installed Oracle 10g on Windows XP, SQLPlus is OK, but I can't start iSQL*Plus service. Please help me how to fix this problem.
Thks a lot.
Best regards,
Kim HungWhat error message is returned when You try to start it?
Additionaly You can read Metalink note 400812.1 - How to Create iSQL*Plus Service after Software Only Install on Windows Machine
And Metalink note 334695.1 is usefull as well. -
Error In Starting Jboss after installing OIM server
Hi All,
I have Installed OIM_Server(OIM 9.1.0.1) ON Jboss server(4.2.3) , I have 1 GB RAM m/c so have JVM setting as -XMS512m -XMX768 m. While installation of OIM Server, it showed the success message. But When I am starting the server , to perform post installation check, it is showing following error message .
Does anybody have any ideas what the problem is? Please provide the possible solution.
Thanks to All :)
Error :
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] Unable to retrieve orbjavax.management.InstanceNotFoundException: jboss:service=CorbaORB is not registered.
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] Linked java:comp/UserTransaction to JNDI name: UserTransaction
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] addEnvEntries
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkResourceEnvRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkResourceRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkMessageDestinationRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkEjbRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkEjbLocalRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkServiceRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkSecurityDomain
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] No security-domain given, using default: java:/jaas/other
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] Linking security/securityMgr to JNDI name: java:/jaas/other
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] AbstractWebContainer.parseWebAppDescriptors, End
2009-07-16 18:43:27,401 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] Using session cookies default setting
2009-07-16 18:44:02,667 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] Running RemoverTask
2009-07-16 18:44:04,964 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, PassivatedCount=0
2009-07-16 18:44:04,964 DEBUG [org.jboss.ejb.plugins.AbstractInstanceCache] removePassivated, now=1247750044964, maxLifeAfterPassivation=1200000
2009-07-16 18:45:11,465 ERROR [STDERR] Exception in thread "DefaultQuartzScheduler_QuartzSchedulerThread"
2009-07-16 18:45:11,465 ERROR [STDERR] java.lang.NoClassDefFoundError: org/quartz/core/JobRunShell
2009-07-16 18:45:11,465 ERROR [STDERR] at org.quartz.impl.StdJobRunShellFactory.borrowJobRunShell(StdJobRunShellFactory.java:86)
2009-07-16 18:45:11,465 ERROR [STDERR] at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:352)
2009-07-16 18:45:11,465 ERROR [STDERR] Caused by: java.lang.ClassNotFoundException: Unexpected error during load of: org.quartz.core.JobRunShell, msg=PermGen space
2009-07-16 18:45:11,465 ERROR [STDERR] at org.jboss.mx.loading.RepositoryClassLoader.loadClassImpl(RepositoryClassLoader.java:560)
2009-07-16 18:45:11,481 ERROR [STDERR] at org.jboss.mx.loading.RepositoryClassLoader.loadClass(RepositoryClassLoader.java:415)
2009-07-16 18:45:11,481 ERROR [STDERR] at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
2009-07-16 18:45:11,481 ERROR [STDERR] at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
2009-07-16 18:45:11,481 ERROR [STDERR] ... 2 more
2009-07-16 18:45:11,481 ERROR [STDERR] Caused by: java.lang.OutOfMemoryError: PermGen space
2009-07-16 18:45:26,168 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] Running RemoverTask
2009-07-16 18:45:26,168 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, PassivatedCount=0
2009-07-16 18:45:26,168 DEBUG [org.jboss.ejb.plugins.AbstractInstanceCache] removePassivated, now=1247750126168, maxLifeAfterPassivation=1200000
2009-07-16 18:45:26,168 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, done
2009-07-16 18:45:33,247 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] Running RemoverTask
2009-07-16 18:45:33,247 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, PassivatedCount=0
2009-07-16 18:45:33,247 DEBUG [org.jboss.ejb.plugins.AbstractInstanceCache] removePassivated, now=1247750133247, maxLifeAfterPassivation=1200000
2009-07-16 18:45:33,247 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, doneI am getting these errors starting JBoss after installing OIM 9.1.0.1 on windows 2003 server with JBoss 4.2.3GA canany one please help me why.
19:04:04,468 INFO [WEBSTARTUP] Scheduler started
19:04:04,484 INFO [TomcatDeployer] deploy, ctxPath=/xlWebApp, warUrl=.../tmp/de
ploy/tmp5989105329966275493XellerateFull.ear-contents/xlWebApp-exp.war/
19:05:02,984 ERROR [STDERR] Exception in thread "DefaultQuartzScheduler_QuartzSc
hedulerThread"
19:11:18,359 ERROR [STDERR] Exception in thread "IdleRemover"
19:15:34,562 ERROR [STDERR] Exception in thread "Thread-15" -
No start-up after installing 10.2
Hello All:
I cannot get my iMac to start up after installing OS 10.2
This - one of the last iMac CRT's - is my old computer which I have erased so I may give it to my niece for Christmas. The machine was running OS 10.2; it has 256MB, a 40 gig HD; it is a graphite slot-loader with a 600mhz processor (I believe).
Once I erased it, I began loading new software: it would take up to 10.0.4 and run, but once I installed 10.2 (from a disk I bought from Apple - white background, blue X) I would get a message to reboot in many languages after the gray screen. A few times I got code during start-up and the machine would freeze.
I ran the firmware updater and installed OS 9.2 thinking that would help. I reset PRAM. I reinstalled 10.0 from different disks I had - the ones which ship with the computer. I ran software updater. Nothing works.
The only thing I thought of doing was getting a copy of OS 10.1 to install after 10.0, but before 10.2. Does this make a diffrence? Can I just jump to OS 10.2? Why didn't the machine ask for the second disk when installing 10.2? Did I do something wrong when I erased the disk? What do I do next?
Thanks in advance for your help,
Rob
iMac Mac OS X (10.4.3)Hi Rob, and welcome to the discussions.
The multi-lingual message to restart is called a kernel panic. This can be caused by software (third-party extensions or drivers) or hardware.
You said the machine was running 10.2 before you erased it to configure for your neice. If so, then your firmware was already up-to-date. Did you change anything on the iMac? New hard drive, new RAM, non-apple keyboard or mouse?
Prior to installing 10.2, you installed 10.0.4 (this isn't necessary, by the way; as long as the firmware is up-to-date, you can erase the hard drive and go straight to 10.2). Did you install any other software? When you installed 10.2, did you did an archive and install, or an upgrade?
I'd suggest starting fresh:
Step 1: Unplug all peripherals (except keyboard and mouse) and boot from your 10.2 install disk, then launch Disk Utility from the Install menu at the top of the screen;
Step 2: Erase the hard drive, and install the OS9 drivers (look for a check-box in the erase window);
Step 3: Have Disk Utility repair the disk (if it fixes any errors, keep running it until it finds no errors);
Step 4: Quit Disk Utility, and continue with the Installer.
Good luck!
Andrew -
Can't start Tomcat after installing Bea WorkShop for JSP
Hi,
I have been using Eclipse SDK Version: 3.1.2 Build id: M20060118-1600 and Web Tools Project 1.0.2 and Tomcat 5.0 and Tomcat 5.5 for about 2 months with no problems. But now I Can't start Tomcat after installing Bea WorkShop for JSP plug-in. I get "Server Tomcat v5.0 @ localhost failed to start". Any help would be greatly appreciated.I installed BEA Workshop for JSP Version: 3.1.0
Build id: 536. I only wanted to install the plug-in to my existng Eclipse 3.1 / WTP application. The only option that I saw was to download the entire FullWorkshopFreeInstall-536.zip, which is 192,496 KB. During the installation, there is a screen that you can specify to only install the plug-in - and I selected that option. Today, I chose to uninstall the BEA Workshop for JSP and then I was again able to start Tomcat server. I then did a complete install of BEA Workshop for JSP into a totally separate location. My original Eclipse installation still works fine, but my Workshop for JSP Version (which is now a completely new installation) has the same problem with Tomcat that I reported with the plug-in. I am using j2sdk1.4.2_08 and have tried both Tomcat 5.0 and Tomcat 5.5. I have the same problem with both Windows XP Home Edition and Windows XP Professional.
Thanks for your assistance.
Ron -
Can't Start Portal After Install
After downloading and installing the of evaluation Portal 4.0 SP1, I get the following message upon startup when I enter the system password that I entered during installation:
Starting WebLogic Server ....
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: try to access method weblogic/management/internal/
Helper.preloadMBeanInfos()V from class weblogic/management/Admin
at weblogic.management.Admin.initialize(Admin.java:210)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
I even tried "weblogic" for the system password and I get the same message.
What password should I use to start the server?I've followed the directions and am experiencing the exact same problem. Brand
new installation of Weblogic server 6.1 SP2 with examples. That install is working.
Then added Portal 4.0 SP1, updated the license file and I have the same issue
with the Illegal access exception resulting in the "Fatal initialization exception"....
Hmm!
[email protected] (Bowrat) wrote:
Below listed are the common errors you run into during installation
process:
- You need to have the correct version numbers of both the weblogic
server and the portal server. For instance the portal server 4.0 (eval
copy) will only run on WebLogic 6.1 SP1. So check the edocs for
supported platforms
- Make sure you have the installed the full version of the weblogic
server (including examples)
- Finally, you need to run the UpdateLicense.cmd file to update the
license.bea under ur Bea Root
Give it a shot after u have checked all of the above three - goodluck
- Bowrat
www.Bowstreet.com
Steve Anderson <[email protected]> wrote in message news:<[email protected]>...
From: Steve Anderson <[email protected]>
Newsgroups: weblogic.support.install
Subject: Can't Start Portal After Install
References:
NNTP-Posting-Host: 209.11.114.150
X-Original-NNTP-Posting-Host: 209.11.114.150
Message-ID: <[email protected]>
Date: 13 Feb 2002 20:25:53 -0800
X-Trace: 13 Feb 2002 20:25:53 -0800, 209.11.114.150
Organization: BEA SYSTEMS Inc
Lines: 18
XPident: firewall-user
Path: newsgroups.bea.com!209.11.114.150
Xref: newsgroups.bea.com weblogic.support.install:9600
After downloading and installing the of evaluation Portal 4.0 SP1,I get the following message upon startup when I enter the system password
that I entered during installation:
Starting WebLogic Server ....
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: try to access method weblogic/management/internal/
Helper.preloadMBeanInfos()V from class weblogic/management/Admin
at weblogic.management.Admin.initialize(Admin.java:210)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
I even tried "weblogic" for the system password and I get the samemessage.
What password should I use to start the server? -
Errors starting JBoss after installing OIM
I am getting these errors starting JBoss after installing OIM 9.1.0.1 on windows 2003 server with JBoss 4.2.3GA canany one please help me how to resolve.
increasing the memory did not help.
19:04:04,468 INFO [WEBSTARTUP] Scheduler started
19:04:04,484 INFO [TomcatDeployer] deploy, ctxPath=/xlWebApp, warUrl=.../tmp/de
ploy/tmp5989105329966275493XellerateFull.ear-contents/xlWebApp-exp.war/
19:05:02,984 ERROR [STDERR] Exception in thread "DefaultQuartzScheduler_QuartzSc
hedulerThread"
19:11:18,359 ERROR [STDERR] Exception in thread "IdleRemover"
19:15:34,562 ERROR [STDERR] Exception in thread "Thread-15"I am getting these errors starting JBoss after installing OIM 9.1.0.1 on windows 2003 server with JBoss 4.2.3GA canany one please help me why.
19:04:04,468 INFO [WEBSTARTUP] Scheduler started
19:04:04,484 INFO [TomcatDeployer] deploy, ctxPath=/xlWebApp, warUrl=.../tmp/de
ploy/tmp5989105329966275493XellerateFull.ear-contents/xlWebApp-exp.war/
19:05:02,984 ERROR [STDERR] Exception in thread "DefaultQuartzScheduler_QuartzSc
hedulerThread"
19:11:18,359 ERROR [STDERR] Exception in thread "IdleRemover"
19:15:34,562 ERROR [STDERR] Exception in thread "Thread-15" -
Logic pro not starting up after install.
Ive tried to install Logic pro twice and both time it will not start up after install. can someone tell me what is the best way to install this program correctly? should i just pay apple more money to install the program for me?
I have exactly the same problem. Whilst 8.0.1 would hang during startup without displaying the splash screen intermittently 8.0.2 crashs every time a few seconds after displaying the splash screen.
Although my computer is almost 6 years old it is perfectly adequate for audio work. I hope this is fixed soon. Unimpressed with the quality control. -
when does the test time start? After installing the program? Or only after opening the program? background: I accidently installed the Photoshop test version, but O am still busy with testing Premiere Pro.
Freialeben7 the evaluation period begins when you first launch the Adobe application you are wishing to evaluate.
-
Problems starting iSQL PLUS service on Windows XP
Dear Forum,
I installed oracle 10g for the first time on Win XP. The Installtion-Process was fine. Now I'm not able to iSQL Plus, beacause the iSQL service in the administration area does not start properly. The status always says that it is starting unfortunately with no success.
Need help!
Thanks in advance
sportmeierhi
i was wondering if and how you solved this error
i have the same problem now
thanks -
ISQL*Plus Failed ta start the service, Error:0
Hello there,
I setup Oracle 10g for window 2003. When to Configuration Assistans then show table error : Failed ta start the service, Error:0, The operation completed successfully.
In the Event Viewer i can see the following:
The description for Event ID ( 15 ) in Source ( iSQL*Plus Application Server ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: 1460, This operation returned because the timeout period expired.
, 4.
I set the Path variable C:\oracle\SOL\102\bin and the ORACLE_HOME to:
C:\oracle\SOL\102
But it did not solve the problem.
I installed only Windows 2003 Enterprise Server with Service Pack 2
when i use this command isqlplusctl start at command prompt the message appears:
Failed ta start the service, Error:0, The operation completed successfully.
please can you help here?I forgot.
I installed JAVA SDK 1.4.2_09 too
But when i uninstall it the same error appears...
But i think Oracle do run with 1.4.2_09 or not? -
Messaging service in "starting" status 8.8
When the server (Windows 2003) is started the Business One Messaging Service gets stuck in "Starting" status and messages fail when sent from B1. Client is using B1 8.8 PL07. The service is set to start automatically when the server starts. They are using SQL 2008 Standard.
If I terminate the B1mail.exe process, I can restart the service and all works well.
I am experiencing the same issue on my demo laptop (Windows Vista).Hi there,
I have just encountered exactly the same problem. My client is running Windows 7 Professional as a server and is on 8.8 PL 11. Gorden, do you have any idea what is causing this? I have UAC disabled and have the 'run as administrator' box ticked for the service manager. I have also tried running the service with the Administrator account rather than the local service. This made no difference.
I can't expect the client to manually start this service each time her reboots the server.
Thanks.
Kind regards,
Simon -
i delete my isq*plus service manaully on my windows machine with the following command:
D:\>sc delete OracleOraDb10g_home1iSQL*Plus
[SC] DeleteService SUCCESS
how can i recreate this service without reinstalling oracle softwareHi,
Why don't create a service of isqlplus and try to test it, since you have removed or deleted the service registration from the registry but not the software components. There is would not be required to install a isqlplus components once again.
- Pavan Kumar N -
We have SPD workflows and Nintex workflows which are configured to start automatically on a Document Library which have content type. After we have been installed KB2687453
(sp2) , all the workfows running on documnet library with content type got strucked and always saying" starting". Please help us.,... highly apprciated as it's urgnet. Thanks in advance.Hi nart ,
It is a known issue. Please install the June 2013 CU to solve the problem.
June 2013 CU:
http://blogs.technet.com/b/stefan_gossner/archive/2013/06/12/june-2013-cu-for-sharepoint-2010-has-been-released.aspx
For more information, you can refer to the thread:
http://blogs.msdn.com/b/chaun/archive/2013/05/16/if-your-sp2010-workflows-are-stuck-in-the-starting-state.aspx
http://social.technet.microsoft.com/Forums/sharepoint/en-US/5a6e6e83-b59f-4099-a86f-a07723ff2b98/workflow-stuck-in-starting-state-after-applying-sharepoint-2010-cu-december-2012?forum=sharepointadminprevious
Best Regards,
Eric
Eric Tao
TechNet Community Support
Maybe you are looking for
-
For some reason I got an error message trying to update itunes on my Vista PC and for some reason could not run itunes. I uninstalled itunes completely and tried to download a new installation. Near the end of the installation I got this error messag
-
Bank Reconciliation Statements
Hi, I want to know how to get the previous month and current month Bank Reconciliation Statements? Business One Implementation Version is 2005. Please give me suggetions. Thanks Satya
-
Function Module to find 3 months Old Date
Is there any function module to find out 3 months old date for a todays date....Pls Help me......
-
How to bind the database?
How to bind the database and to place the data of a field in a EditBox and to modify the data of a table.
-
okay, so i'm not sure where to post this. all of a sudden yahoo will not load and i use yahoo email so thats a huge problem. why would this be happening? i can access yahoo on any other computer. itunes store won't work either but thats a whole diffe