10g Installation on OSX errors in invoking

Hello,
I ran into some serious "Error in invoking target..." errors during the installation of 10g on OSX 10.3.8, which lead to a completely useless Oracle. Have you guys had the same problems? The first one was because of a directory that didn't exist (/Volumes/u01/app/oracle/product/10.1.0/db_18/precomp/lib/proc). The second one concerned a gcc error (ld: Undefined symbols:_nnfoboot). I wasn't able to continue successful installation after this.
Thanks,
Stefan

Similar Messages

Oracle Installation on linux Error in invoking target ntcontab.o

Hi All,
During installing Oracle 8i EE on mandrake Linux 7.0, at the point of linking oracle protocol support 8.1.6.1.0 ,while Linking in progress I got the following message box
"Error in invoking target ntcontab.o of make file /home/network/lib/ins_net_client.mk.
==================
ABORT,RETRY,IGNORE
==================
If I select igmore and continue , even after successfull installation ,when try to run svrmgr or sqlplus at the shell $
I am getting error in loading shared libraries.
Thanks a lot for the help
Anant Kuslekar
null

hi,i got the some problem too.
but maybe below could do some help:
================================================
Instructions for Existing Oracle8i Installations
Place the tar file glibc-2.1.3-stubs.tar.gz in $ORACLE_HOME.
Make sure ORACLE_HOME is set in your environment. Then carry out
the following steps:
cd $ORACLE_HOME
tar xvfz glibc-2.1.3-stubs.tar.gz
./setup_stubs.sh
You should now be able to use Oracle as usual.
================
Warning
Make sure the directory $ORACLE_HOME/lib is not listed in your
/etc/ld.so.conf. The system could potentially become unstable
after applying this patch in that case. If $ORACLE_HOME/lib is
currently listed in /etc/ld.so.conf, remove it and run ldconfig
before applying this patch.
================================
Notes for Application Developers
If your application does not require linking at install sites,
then no additional steps are required for your application to be
compatible with glibc or the Oracle8i client shared library
after the installation of this patch. This is true regardless of
whether your application was compiled using glibc-2.1.3 or a
later version.
If your application is compiled using glibc-2.1.3 and requires
linking at install-time using the Oracle8i client shared ibrary,
then you may also need to link your application using the stub
libraries provided in this patch. For example, an application
which might typically be linked as follows on a glibc-2.1.3
based system:
gcc -o app app.o -L$ORACLE_HOME/lib -lclntsh
should now be linked as follows on systems with a newer version
of glibc,in order to ensure compatibility:
gcc -o app app.o -L$ORACLE_HOME/lib -L$ORACLE_HOME/lib/stubs -
lclntsh
If your application is compiled using a version of glibc later
than 2.1.3 and requires linking at install-time using the acle8i
client shared library, then you must NOT link your application
with the stub libraries provided in this patch. Doing so may
either cause the link to fail or the resulting executables to be
invalid.
Note that the stub libraries provided in this patch only cover
the shared objects that make up glibc. If your application must
be linked at install-time with other shared objects which were
built to have dependencies on the locally installed version of
glibc (e.g., X11), then your application must be compiled using
the same version of glibc that was used by those other
components. For example, on a system with glibc-2.2, linking your
application with libX11.so will fail if you attempt to use the
glibc-2.1.3stub libraries, since libX11.so on that system will
have been compiled and linked using glibc-2.2.

Oracle 10G installation problem, and errors on SOLARIS 10 x86

HI.
I installed the last version of oracle 10g on a x86 SOLARIS 10 system.
When the installer arrived at Configuration assistants, the window is stopping, and I can't see forward. But when I look at the installAction.log, the installation is checked as OK (?).
When I launch sqlplus, and startup inside, it is said the ora-00205 error (problem with control files), and in the end, I'm really suprised there's no the database I told the installer to create at the beginning. But should I be surprised? As I didn't see really the end of the installation, and the installer didn't propose me the PATH where to install the DB, well, I guess there's something wrong.
Could anybody tell me how to solve these problems, please?
Thank you :)

Two options:
1. Create database using DBCA - execute $ORACLE_HOME/bin/dbca
2. Create database manually (without DBCA)

10g installation to CentOS error

hi,
when i want install oracle there is error occured which shown in the image
do you now why it is? thanx a lot
Image: !http://www.soydash.com/oracle.JPG!
Edited by: Araz MUSTAFA on Aug 27, 2009 2:23 PM

Araz MUSTAFA wrote:
hi,
when i want install oracle there is error occured which shown in the image
do you now why it is? thanx a lot
Image: !http://www.soydash.com/oracle.JPG!
Edited by: Araz MUSTAFA on Aug 27, 2009 2:23 PMBe sure you've installed all required packages of CentOS

Problem during installation(error in invoking target 'ntcontab.o' of make f

Hi,
Operating System:Enterprise Linux Release 5 Update 2 for x86 (32 Bit)
Database:Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86
When I am trying to installt database on the VMware virtaul machine i am getting the following error durig the linking phase of installation(at 62%)
error in invoking target 'ntcontab.o' of make file.
I have googled for this error,but i didn't find any solution which fits my requirement.
I am hoping a expert advice from this forum for my problem.
Thank You all..

Please post your Installation problems on under the Installation Topic => Database Installation

10g grid instalaltion on Suse 9 - Error in invoking target 'ioracle' of mak

Please give me step by step instruction how to overcome this problem. I have all packages as per installation document.I am selecting create new database option during installation.
During installation , I got Error in invoking target 'ioracle' of makefile '/opt/oracle/product/10.1.0/EM10g_1/rdbms/lib/ins_rdbms error so I have selected continue (which uses default values)
Exception String: Error in invoking target 'ioracle' of makefile '/opt/oracle/product/10.1.0/EM10g_1/rdbms/lib/ins_rdbms.
mk'. See '/opt/oracle/oraInventory/logs/installActions2005-10-27_12-42-17PM.log' for details.
later I got this error. I didn't include the path variable as it takes itself during instalaltion.
/opt/oracle has jre file
drwxrwxr-x 10 oracle dba 4096 2005-10-27 18:27 oraInventory
drwxrwxr-x 3 oracle dba 4096 2005-10-27 15:34 jre
drwxrwxr-x 3 oracle dba 4096 2005-10-27 14:02 product
but in following path opt/oracle/jre/1.1.8/bin/../bin/i686/native_threads/jre it puts ../bin . Which parameter needs to modify or which scripts need to modify to continue the instalaltion.
Starting to execute configuration assistants
Launched configuration assistant 'Oracle Net Configuration Assistant'
Tool type is: Recommended.
The command being spawned is: '/opt/oracle/product/10.1.0/EM10g_1/JRE/bin/jre -native -Duser.dir=/opt/oracle/product/10.
1.0/EM10g_1/network/jlib -classpath /opt/oracle/product/10.1.0/EM10g_1/JRE/lib/i18n.jar:/opt/oracle/product/10.1.0/EM10g_
1/JRE/lib/rt.jar:/opt/oracle/product/10.1.0/EM10g_1/jlib/ewt3.jar:/opt/oracle/product/10.1.0/EM10g_1/jlib/ewtcompat-3_3_1
5.jar:/opt/oracle/product/10.1.0/EM10g_1/jlib/netcfg.jar:/opt/oracle/product/10.1.0/EM10g_1/network/jlib/netcam.jar:/opt/
oracle/product/10.1.0/EM10g_1/network/jlib/netca.jar:/opt/oracle/product/10.1.0/EM10g_1/jlib/help3.jar:/opt/oracle/produc
t/10.1.0/EM10g_1/jlib/oracle_ice5.jar:/opt/oracle/product/10.1.0/EM10g_1/jlib/share.jar:/opt/oracle/product/10.1.0/EM10g_
1/jlib/swingall-1_1_1.jar:/opt/oracle/product/10.1.0/EM10g_1/jlib/srvm.jar:/opt/oracle/product/10.1.0/EM10g_1/network/too
ls oracle.net.ca.NetCA /silent /orahome /opt/oracle/product/10.1.0/EM10g_1 /instype custom /inscomp NO_VALUE /insprtcl tc
p,tcps /cfg local /authadp NO_VALUE /responseFile /opt/oracle/product/10.1.0/EM10g_1/network/install/netca_clt_cus.rsp'
Start output from spawned process:
/opt/oracle/jre/1.1.8/bin/../bin/i686/native_threads/jre: relocation error: /opt/oracle/jre/1.1.8/bin/../lib/i686/native_
threads/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
End output from spawned process.
Invalid Exit Code. The following result code will be used for configuration assistants: 1
Configuration assistant "Oracle Net Configuration Assistant" failed
/opt/oracle/jre/1.1.8/bin/../bin/i686/native_threads/jre: relocation error: /opt/oracle/jre/1.1.8/bin/../lib/i686/native_
threads/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
Result code for launching of configuration assistant is: 1
The OUICA command is launched from /opt/oracle/product/10.1.0/EM10g_1/oui/bin/ouica.sh.
Error:*** Alert: Some of the configuration assistants failed. It is strongly recommended that you retry the configuration
assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly c
onfigured. Select the failed assistants and click the 'Retry' button to retry them. ***
User Selected: Yes/OK

I am having the same issue trying to install EM Grid Control 10.1.0.2 on a 9.2.0.5 Repository on HP-UX platform. I am wondering if you have found a solution?
Thanks,
Dawit

Oracle Application Server 10.2 installation problem: Error in invoking targ

Hi,
I am installing Oracle Application server 10.2 in IBM AIX 6.1 and I encounter this error during the installation..
Error in invoking target "install" of makefile
I am in the linking part
kindly help me out.
thanks...

This could be if you miss a library or package, did you follow any note to perform the installation?
Have you read the notes in metalink about 6.1?
There is some information about oracle Aplicaitons 12, even is not the same, the packages and filesets used to be the same. try to look for them.
Greetings.

Error in invoking target 'ntcontab.o' of make file.

Hi,
Operating System:Enterprise Linux Release 5 Update 2 for x86 (32 Bit)
Database:Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86
When I am trying to installt database on the VMware virtaul machine i am getting the following error durig the linking phase of installation(at 62%)
error in invoking target 'ntcontab.o' of make file.
I have googled for this error,but i didn't find any solution which fits my requirement.
I am hoping a expert advice from this forum for my problem.
Thank You all..

Hi , I have all rpms installed on RHEL 5 but still getting below error...
/usr/bin/make -f ins_net_client.mk mkldflags ORACLE_HOME=/11gdb/app/db11gee/product/11.1.0/db_1//usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/11gdb/app/db11gee/product/11.1.0/db_1/rm -f ntcontab.*
(if [ "compile" = "compile" ] ; then \
/11gdb/app/db11gee/product/11.1.0/db_1/bin/gennttab > ntcontab.c ;\
/usr/bin/gcc -c ntcontab.c ;\
rm -f /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o ;\
mv ntcontab.o /11gdb/app/db11gee/product/11.1.0/db_1/lib/ ;\
/usr/bin/ar rv /11gdb/app/db11gee/product/11.1.0/db_1/lib/libn11.a /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o ; fi)
In file included from /usr/include/sys/types.h:31,
from ntcontab.c:7:
/usr/include/bits/types.h:31:20: error: stddef.h: No such file or directory
mv: cannot stat `ntcontab.o': No such file or directory
/usr/bin/ar: /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o: No such file or directory
make: *** [ntcontab.o] Error 1
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/11gdb/app/db11gee/product/11.1.0/db_1/rm -f ntcontab.*
(if [ "compile" = "compile" ] ; then \
/11gdb/app/db11gee/product/11.1.0/db_1/bin/gennttab > ntcontab.c ;\
/usr/bin/gcc -c ntcontab.c ;\
rm -f /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o ;\
mv ntcontab.o /11gdb/app/db11gee/product/11.1.0/db_1/lib/ ;\
/usr/bin/ar rv /11gdb/app/db11gee/product/11.1.0/db_1/lib/libn11.a /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o ; fi)
In file included from /usr/include/sys/types.h:31,
from ntcontab.c:7:
/usr/include/bits/types.h:31:20: error: stddef.h: No such file or directory
mv: cannot stat `ntcontab.o': No such file or directory
/usr/bin/ar: /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o: No such file or directory
make: *** [ntcontab.o] Error 1
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/11gdb/app/db11gee/product/11.1.0/db_1/rm -f ntcontab.*
(if [ "compile" = "compile" ] ; then \
/11gdb/app/db11gee/product/11.1.0/db_1/bin/gennttab > ntcontab.c ;\
/usr/bin/gcc -c ntcontab.c ;\
rm -f /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o ;\
mv ntcontab.o /11gdb/app/db11gee/product/11.1.0/db_1/lib/ ;\
/usr/bin/ar rv /11gdb/app/db11gee/product/11.1.0/db_1/lib/libn11.a /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o ; fi)
In file included from /usr/include/sys/types.h:31,
from ntcontab.c:7:
/usr/include/bits/types.h:31:20: error: stddef.h: No such file or directory
mv: cannot stat `ntcontab.o': No such file or directory
/usr/bin/ar: /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o: No such file or directory
make: *** [ntcontab.o] Error 1
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/11gdb/app/db11gee/product/11.1.0/db_1/rm -f ntcontab.*
(if [ "compile" = "compile" ] ; then \
/11gdb/app/db11gee/product/11.1.0/db_1/bin/gennttab > ntcontab.c ;\
/usr/bin/gcc -c ntcontab.c ;\
rm -f /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o ;\
mv ntcontab.o /11gdb/app/db11gee/product/11.1.0/db_1/lib/ ;\
/usr/bin/ar rv /11gdb/app/db11gee/product/11.1.0/db_1/lib/libn11.a /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o ; fi)
In file included from /usr/include/sys/types.h:31,
from ntcontab.c:7:
/usr/include/bits/types.h:31:20: error: stddef.h: No such file or directory
mv: cannot stat `ntcontab.o': No such file or directory
/usr/bin/ar: /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o: No such file or directory
make: *** [ntcontab.o] Error 1

Installation error - Error in invoking target 'ntcontab.o'

OS: RHEL 5 64bit
Oracle 10g (10.2.0.1.0)
Error in invoking target 'ntcontab.o' of makefile '/u01/app/oracle/product/10.2.0/db_1/network/lib/ins_net_client.mk'. See '/u01/app/oracle/oraInventory/logs/installActions2010-07-27_07-58-23AM.log' for details.
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: rm -f ntcontab.*
INFO: (if [ "compile" = "compile" ] ; then \
     /u01/app/oracle/product/10.2.0/db_1/bin/gennttab > ntcontab.c ;\
     gcc -c ntcontab.c ;\
     rm -f /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o ;\
     mv ntcontab.o /u01/app/oracle/product/10.2.0/db_1/lib/ ;\
/usr/bin/ar rv /u01/app/oracle/product/10.2.0/db_1/lib/libn10.a /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o ; fi)
INFO: /bin/sh: line 2: /usr/bin/gcc: Permission denied
INFO: mv: cannot stat `ntcontab.o'
INFO: : No such file or directory
INFO: /usr/bin/ar: /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o: No such file or directory
INFO: make: *** [ntcontab.o] Error 1
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/u01/app/oracle/product/10.2.0/db_1/network/lib/ins_net_client.mk'. See '/u01/app/oracle/oraInventory/logs/installActions2010-07-27_07-58-23AM.log' for details.
Exception Severity: 1

Checking Packages (RPMs)
You will need some RPM development packages for the Oracle installer to build the Oracle modules, otherwise you will get error messages similar to this one:
Error in invoking target ntcontab.o of makefile
/u01/app/oracle/product/9.2.0/network/lib/ins_net_client.mk
NOTE: Always ensure to use the latest RPM versions!
Packages (RPMs) for RH 7.1, 7.2, and RH AS 2.1:
To see if these development packages are installed on your server, run the following command:
rpm -q gcc cpp compat-libstdc++ glibc-devel kernel-headers binutils
For instance, most of these packages will be missing when you installed RedHat 2.1 Advanced Server and if you did not select the "Software Development" package. For the RedHat 2.1 Advanced Server I executed the following commands to install the missing RPMs from the two CDs:
su - root
rpm -ivh cpp-2.96-108.1.i386.rpm \
glibc-devel-2.2.4-26.i386.rpm \
kernel-headers-2.4.9-e.3.i386.rpm \
gcc-2.96-108.1.i386.rpm \
binutils-2.11.90.0.8-12.i386.rpm

Oracle 10g installation error in linux...

Hi,
i am getting following error when installing oracle 10g(10.2.0.1) in RHEL4.i have installed following required packages also.
binutils-2.15.92.0.2-21
compat-db-4.1.25-9
control-center-2.8.0-12.rhel4.5
gcc-3.4.6-3
gcc-c++-3.4.6-3
glibc-2.3.4-2.25
glibc-common-2.3.4-2.25
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.6-3
libstdc++-devel-3.4.6-3
make-3.80-6.EL4
pdksh-5.2.14-30.3
sysstat-5.0.5-11.rhel4
xscreensaver-4.18-5.rhel4.11
libaio-0.3.105-2
installActions2009-03-18_09-04-11AM.log
INFO: rm -f nnfgt.*
(if [ "compile" = "compile" ] ; then \
/u01/app/oracle/10.2.0/db_1/bin/gennfgt > nnfgt.c ;\
/usr/bin/gcc -c nnfgt.c ;\
rm -f /u01/app/oracle/10.2.0/db_1/lib/nnfgt.o ;\
mv nnfgt.o /u01/app/oracle/10.2.0/db_1/lib/ ;\
/usr/bin/ar rv /u01/app/oracle/10.2.0/db_1/lib/libn10.a /u01/app/oracle/10.2.0/db_1/lib/nnfgt.o ; fi)
INFO: /bin/sh: /usr/bin/gcc: No such file or directory
INFO: mv:
INFO: cannot stat `nnfgt.o'
INFO: : No such file or directory
INFO:
INFO: /usr/bin/ar: /u01/app/oracle/10.2.0/db_1/lib/nnfgt.o: No such file or directory
INFO: make: *** [nnfgt.o] Error 1
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'nnfgt.o' of makefile '/u01/app/oracle/10.2.0/db_1/network/lib/ins_net_client.mk'. See '/u01/app/oracle/oraInventory/logs/installActions2009-03-18_09-04-11AM.log' for details.
Exception Severity: 1
WARNING: This will stop installation of all products and exit the Installer. Are you sure that you want to stop the installation and exit?
INFO: User Selected: Yes/OK
INFO: Exception handling set to prompt user with options to Retry Ignore
User Choice: User selected to stop installation of all components.
Thanks,

what bit oracle software are You trying to install on what bit linux? 32bit for both?
show
uname -a
Required packages are these:
binutils-2.15.92.0.2-18
compat-libstdc++-33.2.3-47.3
elfutils-libelf-0.97-5
elfutils-libelf-devel-0.97-5
gcc-3.4.5-2
gcc-c++-3.4.5-2
glibc-2.3.4-2.19
glibc-common-2.3.4-2.19
glibc-devel-2.3.4-2.19
glibc-headers-2.3.4-2.19
libaio-devel-0.3.105-2
libaio-0.3.105-2
libgcc-3.4.5
libstdc++-3.4.5-2
libstdc++-devel-3.4.5-2
make-3.80-5
sysstat-5.0.5
unixODBC-2.2.11
unixODBC-devel-2.2.11
compat-db-4.1.25-9
compat-libstdc++-296-2.96-132.7.2
control-center-2.8.0-12
gnome-libs-1.4.1.2.90-44.1
pdksh-5.2.14-30
xorg-x11-deprecated-libs-6.8.1-23.EL
openmotif21-2.1.30-11.RHEL4.2 (Required to install Oracle Demos)
do you have them all?
querry with
rpm -aq | grep ....
If You have metalink access then read metalink note 401705.1

Error in invoking target 'agent nmhs' of makefile - during 11g Installation

Hi guys~
I've just installed 11g (x64) on Fedora 13 (x64)
but during the installation there was an error.
Error in invoking target 'agent nmhs' of makefile
*'/u01/app/.../sysman/lib/ins_emagent.mk'*
This is the log file
[http://lyh913.tistory.com/attachment/[email protected]]
When oracle checked prerequisite packages, there was 8 failed packages such as libaio(i386), libgcc(i386) etc. I installed all of them (i686) with yum, but failed status didn't change. so I ignore them.
And then Error in invoking target 'agent nmhs' of makefile occured
Acturally I was able to excute sqlplus successfully but I'm curious that it is okay with this error.
I think there gonna be a problem sooner or later.
Is there anybody who can help me out? Please~ :-)
Anyway thanks for reading and sorry for my poor English(English isn't my mother tongue)

Satish Kandi wrote:
The pre-requisite check has to succeed for the setup to complete successfully (with exceptions).
Have you tried installing the packages without yum?Thank you Satish Kandi~
I tried to download rpm packages and install them after your reply.
But Fedora said that they are already installed.
Failed prerequisite packages were
libaio-0.3.105, compat-libstdc++-33-3.2.3, libaio-devel-0.3.105, libgcc-3.4.6
libstdc++-3.46, unixODBC-2.2.11, unixODBC-devel-2.2.11, pdksh-5.2.14
And I've got these packages.
[root@localhost ~]# rpm -qa | grep i686
nss-softokn-freebl-3.12.4-17.fc13.i686
libtool-ltdl-2.2.6-20.fc13.i686
numactl-devel-2.0.3-8.fc13.i686
libgcc-4.4.4-2.fc13.i686
ksh-20100309-3.fc13.i686
compat-libstdc++-33-3.2.3-68.i686
readline-6.1-2.fc13.i686
libaio-devel-0.3.109-2.fc13.i686
libstdc++-4.4.4-2.fc13.i686
unixODBC-2.2.14-11.fc13.i686
numactl-2.0.3-8.fc13.i686
libaio-0.3.109-2.fc13.i686
unixODBC-devel-2.2.14-11.fc13.i686
glibc-2.12-1.i686
ncurses-libs-5.7-7.20100130.fc13.i686
At first 'glibc(it requires i686)' was failed status but after I installed glibc-2.12-1.i686, it became succeed.
The other packages require i386. Does this mean I should install i386 packages?
Edited by: user10406944 on 2010. 6. 1 오전 3:52
Edited by: user10406944 on 2010. 6. 1 오전 3:52

Installation error in invoking target 'agent nmhs'

Dear All,
I am new to this forum and I would like to inquire about the reasons behind a specific installation error of Oracle 11gR2 on Fedora 13 and the way to fix it. The error led to a weired behavior for the EM. I am going to explain everything precisely to flap the correspondence time so please please please bare with me.
I have followed precisely all the pre-requisites for preparing the installation environment (Fedora 13 Linux OS) by following the instructions in the manual that comes on the source installation Disk-1of Oracle 11g R2, like assigning the environment variables, setting kernel parameters, installation of all the required and necessary packages, creating the necessary directories and changing the owner ship, in addition to creation the user 'oracle' and the necessary groups. This installation ends up with a successful working database that can be accessed using sqlplus locally and remotely from another machine. My EM also worked but for a limited period of time for only about 10 to 15 min then after that I cannot access it due to a problem in the agent background process or daemon that is resulted from the error happened during the installation, and need to restart my machine. Here is what happened.
My installation is a stand alone database (database control / console database). Everything went smoothly during the installation except the following error that I couldn't get rid of or fix it, and I just continued the installation by clicking on the continue button of the OUI alert window. The error message on the alert window is:
Error in invoking target 'agent nmhs' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk'. See '/u01/app/oraInventory/logs/installActions2010-06-24_03-22-15PM.log' for details.
and here is the contenets (error part) of the installActions2010-06-24_03-22-15PM.log file
INFO: /usr/bin/ld: /u01/app/oracle/product/carried(nmectlt.o): undefined reference to symbol 'B_DestroyKeyObject'
*/usr/bin/ld: note: 'B_DestroyKeyObject' is defined in DSO /u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so so try adding it to the linker command line*
*/u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so: could not read symbols: Invalid operation*
INFO: collect2: ld returned 1 exit status
*INFO: make[1]: --- [u01/app/oracle/product/carried] Error 1*
INFO: make[1]: Leaving directory `/u01/app/oracle/product/carried'
*INFO: make: --- [emdctl] Error 2*
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'agent nmhs' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk'. See '/u01/app/oraInventory/logs/installActions2010-06-24_03-22-15PM.log' for details.
Exception Severity: 1
INFO: Calling Action unixActions10.2.0.3.0 ; make
registerOnly = false
installMakePath = /usr/bin/make
installMakeFileName = /u01/app/oracle/product/11.2.0/dbhome_1/rdbms/lib/ins_rdbms.mk
installTarget = all_no_orcl
undoMakeFileName =
installArguments = ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
logFile = /u01/app/oracle/product/11.2.0/dbhome_1/install/make.log
undoTarget =
progMsg = Linking RDBMS Executables
After all the above, I am going to explain here how this error affected the EM. Here is the output of starting the dbconsole:
$ emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
http://bassam-desktop:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control .... started.
Logs are generated in directory /u01/app/oracle/product/carried-desktop_orcl/sysman/log
and here is the output of the status of the dbconsole
$ emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
http://bassam-desktop:1158/em/console/aboutApplication
EM Daemon is not running.
Logs are generated in directory /u01/app/oracle/product/carried-desktop_orcl/sysman/log
notice the EM Daemon (agent background process) is not running
Becuase of this error, the actual status of the database is not shown up in the EM. For example, if I try to startup my database through the EM, it starts successfully, but its status will not be shown, same thing happens for the listener. Clicking the View Details link in the EM after starting up the database shows up the following:
SQL*Plus: Release 11.2.0.1.0 Production on Sat Jun 26 03:43:36 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
SQL> Connected to an idle instance.
SQL> SQL> ORACLE instance started.
Total System Global Area 1489829888 bytes
Fixed Size          1336624 bytes
Variable Size          922749648 bytes
Database Buffers     553648128 bytes
Redo Buffers          12095488 bytes
Database mounted.
Database opened.
SQL> Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent is Not Running
again notice the last line of the message Agent is not running.
After all the above, I beleive that the installation error is the cause of all that. I would appreciate it if you could help me solving this problem. Thanks.
Bassam A. Al-Khaffaf

Hi,
I have successfully installed Oracle 11g R2 after some manual intervention to solve this linker error.
The linker error actually gave the useful hint to solve this problem:
INFO: /usr/bin/ld: /home/akos/app/akos/product/11.2.0/dbhome_1/sysman/lib//libnmectl.a(nmectlt.o): undefined reference to symbol 'B_DestroyKeyObject'
/usr/bin/ld: note: 'B_DestroyKeyObject' is defined in DSO /home/akos/app/akos/product/11.2.0/dbhome_1/lib/libnnz11.so so try adding it to the linker command line
/home/akos/app/akos/product/11.2.0/dbhome_1/lib/libnnz11.so: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
This means that the gcc linker phase lacked an option for "-lnnz11". I run "make agent nmhs" manually,
so the last command that gave an error can be copy&pasted to the command line. Adding "-lnnz11"
after "-lcore11" to the command made it run successfully, and also re-running "make agent nmhs"
on the command line didn't fail now. Then I chose the "Retry" button in the installer GUI and it proceeded.
This change in the Fedora 13 linker was announced at
http://docs.fedoraproject.org/en-US/Fedora/13/html/Release_Notes/sect-Release_Notes-The_GCC_Compiler_Collection.html
In Fedora 12 and earlier it was allowed to an app with library A and the app was able to use symbols
from every other libraries (B, C, ...) that library A was linked with. In Fedora 13 this is not allowed anymore,
your app needs to be linked explicitely with library B, C, etc.
Later, there was another problem with SELinux not allowing text relocation in .../product/11.2.0/dbhome_1/lib/libclntsh.so.11.1
which was solved by running:
chcon -t textrel_shlib_t '.../product/11.2.0/dbhome_1/lib/libclntsh.so.11.1'
and re-running configuration of "Oracle Net Configuration Assistant". This allows keeping SELinux on.
After that, installation and setup of the first database succeeded on Fedora 13.

Error in invoking target 'install' after extproc32 in x86_64 installation

Hi
I am trying to install patch p4547809 (9.2.0.8) however when it gets to 99% of the installation I get this error:
Error in invoking target 'install' of makefile '/u01/oracle/9ir2db/rdbms/lib/ins_rdbms.mk'
According to the log file the error is as follows:
Linking external procedure agent (/u01/oracle/9ir2db/rdbms/lib/extproc32)
rm -f /u01/oracle/9ir2db/rdbms/lib/extproc32
gcc -m32 -o /u01/oracle/9ir2db/rdbms/lib/extproc32 -L/u01/oracle/9ir2db/rdbms/lib32/ -L/u01/oracle/9ir2db/lib32/ -L/u01/oracle/9ir2db/lib32/stubs/ /u01/oracle/9ir2db/rdbms/lib32/hormc.o /u01/oracle/9ir2db/rdbms/lib32/defopt.o /u01/oracle/9ir2db/rdbms/lib32/homts.o -lagtsh -lpls9 -lplp9 -lclntsh -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 /u01/oracle/9ir2db/lib32/libgeneric9.a `cat /u01/oracle/9ir2db/lib32/sysliblist` -Wl,-rpath,/u01/oracle/9ir2db/lib:/lib:/usr/lib -lm `cat /u01/oracle/9ir2db/lib32/sysliblist` -ldl -lm -lvsn9
/usr/lib/gcc/x86_64-redhat-linux/3.4.6/libgcc_s_32.so: undefined reference to `dl_iterate_phdr@GLIBC_2.2.4'
collect2: ld returned 1 exit status
make[1]: *** [u01/oracle/9ir2db/rdbms/lib/extproc32] Error 1
make[1]: Leaving directory `/u01/oracle/9ir2db/rdbms/lib'
make: *** [extproc32] Error 2
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'install' of makefile '/u01/oracle/9ir2db/rdbms/lib/ins_rdbms.mk'. See '/u01/oracle/oraInventory/logs/installActions2006-12-07_12-11-52PM.log' for details.
Exception Severity: 1
*** Cancel Dialog: ***
User Selected: Stop installation of all products.
Here are some additional details:
rpm -q binutils gcc gcc-c++ glibc gnome-libs libstdc++ libstdc++-devel make \ pdksh sysstat xscreensaver libaio binutils-2.15.92.0.2-21gcc-3.4.6-3
gcc-c++-3.4.6-3
glibc-2.3.4-2.25
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.6-3
libstdc++-devel-3.4.6-3
make-3.80-6.EL4
sysstat-5.0.5-11.rhel4
xscreensaver-4.18-5.rhel4.11
libaio-0.3.105-2
>
I would appreciate any assistance on this. Thanks

Problem is the compiler version. You need to use gcc 3.2 instead of 3.4.

Error in invoking target 'dm_on ioracle' with EM installation....

Error installing Oracle 10g EM Grid Control Release 2 for Linux x86 (looks like Oracle doesn't have a specific one for the 64-bit Linux. The thought was our 64-bit Linux should be able to support both 64-bit and 32-bit applications)
Encountered error 'Error in invoking target 'dm_on ioracle' of makefile '/u01/app/oracle/OracleHomes/db10g/rdbms/lib/ins_rdbms.mk' during the linking stage.
Any ideas/ suggestions? Thanks,

I have this same problem when trying to install OEM Grid Control 10gR2 in Red Hat Enterprise Linux 4:
# gcc -v
Reading specs from /usr/lib/gcc/i386-redhat-linux/3.4.6/specs
Configured with: ../configure prefix=/usr mandir=/usr/share/man infodir=/usr/share/info enable-shared enable-threads=posix disable-checking with-system-zlib enable-__cxa_atexit disable-libunwind-exceptions enable-java-awt=gtk --host=i386-redhat-linux
Thread model: posix
gcc version 3.4.6 20060404 (Red Hat 3.4.6-8)
# g++ -v
Reading specs from /usr/lib/gcc/i386-redhat-linux/3.4.6/specs
Configured with: ../configure prefix=/usr mandir=/usr/share/man infodir=/usr/share/info enable-shared enable-threads=posix disable-checking with-system-zlib enable-__cxa_atexit disable-libunwind-exceptions enable-java-awt=gtk --host=i386-redhat-linux
Thread model: posix
gcc version 3.4.6 20060404 (Red Hat 3.4.6-8)
# rpm -qa |grep gcc
compat-gcc-32-c++-3.2.3-47.3.i386
gcc-c++-3.4.6-8.i386
gcc-3.4.6-8.i386
gcc-java-3.4.6-8.i386
libgcc-3.4.6-8.i386
gcc-g77-3.4.6-8.i386
compat-libgcc-296-2.96-132.7.2.i386
compat-gcc-32-3.2.3-47.3.i386
# uname -a
Linux myoracle.host.com 2.6.9-55.0.12.ELsmp #1 SMP Wed Oct 17 08:19:30 EDT 2007 i686 i686 i386 GNU/Linux
# ll -a /usr/bin/gcc
-rwxr-xr-x 2 root root 96344 Mar 2 2007 /usr/bin/gcc
# ll -a /usr/bin/g++
-rwxr-xr-x 4 root root 98896 Mar 2 2007 /usr/bin/g++
What else can I look for?
Thank you.

Following error occurs while oracle client 10g installation on Linux 5

Following error occurs while oracle client 10g installation on Linux 5
[oraclient@SVHJ0678 client]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-04-14_02-30-53AM. Please wait ...[oraclient@SVHJ0678 client]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-04-14_02-30-53AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)

user8862191 wrote:
Following error occurs while oracle client 10g installation on Linux 5
What is Linux 5? Do you mean Oracle Enterprise Linux (OEL) 5 ???
[oraclient@SVHJ0678 client]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-04-14_02-30-53AM. Please wait ...[oraclient@SVHJ0678 client]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-04-14_02-30-53AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)

10g Installation on OSX errors in invoking

Similar Messages

Maybe you are looking for