10g instance not shutdown when XP shutdown

I have oracle 10.2.0.4 installed on XP Pro SP2. I have set up and confirmed that the registry entries for ORA_SHUTDOWN and ORA_INSTANCE_SHUTDOWN are set to true.  The timeout is at the default of 90.
If I go to the control panel and stop the service, the instance shuts down cleanly, as indicated by the entries in alert_instance.log.
When I shutdown(restart) the operating system, the os does not wait even 90 seconds, and the database is not shut down cleanly. There are no shutdown entries in the alert log, and there are crash recovery entries when it starts back up.
Does anyone else have this problem? Does anyone have a solution or suggestions of other things to set or check?
Thanks,
Debbie

Hi Debbie,
Just a guess but it could be something to do to with the privileges assigned to the windows user you are logging in as.
Is that user a member of the following groups? :
On MS Windows NT/2000/2003/XP:
On MS Windows the OSOPER and OSDBA groups are hard coded groups thus:
Group Name Oracle uses this as...
~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~
ORA_OPER OSOPER group for all instances
ORA_DBA OSDBA group for all instances
or
ORA_sid_OPER OSOPER group for a specific Oracle SID
ORA_sid_DBA OSDBA group for a specific Oracle SID
When you issue a 'CONNECT / AS SYSDBA' , Oracle checks if your MS Windows logon is a
member of the 'ORA_sid_DBA' or 'ORA_DBA' group.
On MS Windows NT/2000/2003/XP:
On MS Windows the OSOPER and OSDBA groups are hard coded groups thus:
Group Name Oracle uses this as...
~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~
ORA_OPER OSOPER group for all instances
ORA_DBA OSDBA group for all instances
or
ORA_sid_OPER OSOPER group for a specific Oracle SID
ORA_sid_DBA OSDBA group for a specific Oracle SID

Similar Messages

  • The Cluster not failover when i shutdown one managed server?

    Hello, I created one cluster whit two managed servers, and deployed an application across the cluster, but the weblogic server gave me two url and two different port for access to this application.
    http://server1:7003/App_name
    http://server1:7005/App_name
    When I shutdown immediate one managed server i lost the connection whit the application from this managed server, My question is, the failover and de load balancer not work, why??
    Why two diferent address?
    thank any help

    Well you have two different addresses (URL) because those are two physical managed servers. By creating a cluster you are not automatically going to have a virtual address (URL) that will load balance requests for that application between those two managed servers.
    If you want one URL to access this application, you will have to have some kind of web server in front of your WebLogic. You can install and configure Oracle HTTP Server to route requests to WebLogic cluster. Refer this:
    http://download.oracle.com/docs/cd/E12839_01/web.1111/e10144/intro_ohs.htm#i1008837
    And this for details on how to configure mod_wl_ohs to route requests from OHS to WLS:
    http://download.oracle.com/docs/cd/E12839_01/web.1111/e10144/under_mods.htm#BABGCGHJ
    Hope this helps.
    Thanks
    Shail

  • SAP Dialog Instance is not Starting - DISPATCHER EMERGENCY SHUTDOWN

    Hi All,
    We  are running on SAP ECC 6.0, Oracle 10, Windows 2003.
    We have One Central Instance an Two Dialog Instances, we shutdown the SAP system (  Jun 10 15:56:18 2008 ) to do an OFFLINE backup, now one of the Dialog Instances is no starting, we try to restart the system on Wed Jun 11 02:05:45 2008
    Oracle is Up and Open.
    The Central Instance and one of the Dialog Instances are Up, so you can login on the SAP System, and execute SAP transactions.
    I will Attach Our DEV_DISP, and DEV_W0 files:
    dev_dip
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      02
    sid        MIS
    systemid   562 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    133
    intno      20050900
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        4008
    Wed Jun 11 02:05:45 2008
    kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (02 4008) [dpxxdisp.c   1239]
         shared lib "dw_xml.dll" version 133 successfully loaded
         shared lib "dw_xtc.dll" version 133 successfully loaded
         shared lib "dw_stl.dll" version 133 successfully loaded
         shared lib "dw_gui.dll" version 133 successfully loaded
         shared lib "dw_mdm.dll" version 133 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    Wed Jun 11 02:05:50 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5371]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >SAPPREC2_MIS_02                         <
    DpShMCreate: sizeof(wp_adm)          37008     (1480)
    DpShMCreate: sizeof(tm_adm)          56268128     (28120)
    DpShMCreate: sizeof(wp_ca_adm)          80000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     160000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=2000/16/2208064/2208080
    DpShMCreate: sizeof(comm_adm)          2208080     (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1864)
    DpShMCreate: sizeof(wall_adm)          (416064/346352/64/192)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000CCF0050, size: 59524432)
    ERROR => DpShMCreate: ShmCreate SHM_DP_CA_KEY(rc=4) [dpxxca.c     181]
    ERROR => DpIPCInit2: DpShMCreate [dpxxtool2.c  462]
    DP_FATAL_ERROR => DpSapEnvInit: DpIPCInit2
    DISPATCHER EMERGENCY SHUTDOWN ***
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Jun 11 02:05:55 2008
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >SAPPREC2_MIS_02                         < (normal)
    DpJ2eeDisableRestart
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    call semaphore clean-up function ...
    ***LOG Q0E=> DpSigGenHandler, Exception (c0000005) [dpnttool.c   432]
    C-STACK -
    SAP (R) - R/3(TM) Callstack, Version 1.0
    Copyright (C) SAP AG. All rights reserved.
    Application exception occurred:
    Exception : c0000005 (Access Violation)
    App       : disp+work.EXE (pid=4008)
    When      : 6/11/2008 2:5:55.274
    Threads   : 2
    Computer Name       : SAPPREC2
    User Name           : SAPServiceMIS
    Number of Processors: 4
    Processor Type: EM64T Family 6 Model 15 Stepping 6
    Windows Version     : 5.2 Current Build: 3790
    State Dump for Thread Id 11ec
    --> (FAULT) Stack Back Trace <--
    FramePtr         ReturnAd         Param#1          Function Name
    0000000007d1f2e0 000000000041a395 0000000000000001 disp+work!DpVmcCheckDebugProxy [dpxxvmc.c (1211)]
    0000000007d1f3d0 000000000041d007 0000000005561401 disp+work!DpHalt [dpxxdisp.c (10016)]
    0000000007d1fc10 0000000000421a1b 0000000002671ab0 disp+work!DpFatalErr [dpxxdisp.c (17789)]
    0000000007d1feb0 000000000042d570 0000000000000000 disp+work!DpSapEnvInit [dpxxdisp.c (1388)]
    0000000007d1fee0 000000000040108d ffffffff00000002 disp+work!DpMain [dpxxdisp.c (1076)]
    0000000007d1ff10 00000000019c7dd1 0000000000000000 disp+work!nlsui_main [thxxanf.c (84)]
    0000000007d1ff70 0000000077d5966c 0000000000000000 disp+work!wmainCRTStartup [crtexe.c (498)]
    0000000007d1ffa0 0000000000000000 00000000019c7c60 kernel32!BaseProcessStart
    State Dump for Thread Id 1194
    --> Stack Back Trace <--
    FramePtr         ReturnAd         Param#1          Function Name
    000000000ccefe40 0000000077d5f651 0000000007d7bc60 ntdll!NtFsControlFile
    000000000ccefeb0 00000000018ae00f 0000000000000000 kernel32!ConnectNamedPipe
    000000000cceff40 000007ff7fc411c4 0000000000000000 disp+work!SigIMsgFunc [signt.c (679)]
    000000000cceff70 0000000077d6b69a 0000000077d6b660 msvcrt!endthreadex
    000000000cceffa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
    call clean-up function ...
    SigICallExitRoutine: call exithandler (DpHalt)
    DpHalt: shutdown server >SAPPREC2_MIS_02                         < (normal)
    DpJ2eeDisableRestart
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    DpShmPrfSwitch : State already set (OFF)
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    And our dev_w0
    this file was no modifued since we stop SAP System.
    M Tue Jun 10 15:56:18 2008
    M  *** WARNING => ThSndDelUser: delete client/user 020/RMENDOZA     (T60) on server SAPPREC1_MIS_01    
    S 
    S Tue Jun 10 19:07:40 2008
    S  server @>SSRV:SAPPREC1_MIS_01@< appears or changes (state 3)
    M 
    M Tue Jun 10 19:07:52 2008
    M  in_ThErrHandle: 1
    M  ThIErrHandle: new stat of W0 is WP_SHUTDOWN   
    M  ThIErrHandle: I'm during shutdown
    M  PfStatDisconnect: disconnect statistics
    M  Entering ThSetStatError
    M  ThCallDbBreak: use db_sqlbreak
    M  ThIErrHandle: don't try rollback again
    M  ThShutDownServer: shutdown server
    M  PfStatIndInit: Initializing Index-Record
    M  PfWriteIntoFile: copied shared buf (0 bytes) to local buf
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    B  Disconnecting from ALL connections:
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 INACTIVE     NO  YES NO  000 255 255 20080610 144648 SAPPRECDB      
    C  Disconnecting from connection 0 ...
    C  Closing user session (con_hdl=0,svchp=000000000866D128,usrhp=0000000007D91058)
    C  Detaching from DB Server (con_hdl=0,svchp=000000000866D128,srvhp=0000000018D61918)
    C  Now I'm disconnected from ORACLE
    B  Disconnected from connection 0
    B  statistics db_con_commit (com_total=29203, com_tx=3253)
    B  statistics db_con_rollback (roll_total=494, roll_tx=0)
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 2632) [dpnttool.c   327]
    Please Some Tips!
    Best Regards,
    Erick ILarraza

    Hi Deepak,
    Thanks  a lot for your reply, in this case the problem was with the Dialog Instance (Only SAP apps, not Oracle).
    We shutdown the instance with the Microsoft SAP Management Console (right  button -> Stop).
    In general to shutdown the SAP System we first:
    1. Shutdown The Dialog Instance. (SAP Management Console)
    2. Shutdown The Central Instance. (SAP Management Console)
    3. Shutdown Oracle (BR*Tools).
    4. Stop SAP and Oracle Services.
    Maybe is more a problem of Windows Memory Management.....
    Best Regards,
    Erick ILarraza

  • Windows service does not stop when DB is shutdown from SQL*Plus

    I have a 11g XE DB in a Windows 7 machine.
    The installation has created a Windows service called OracleServiceXE. It's status is STARTED.
    I then login to SQLPLUS as sysdba and do a shutdown immediate;
    SQL> shutdown immediate
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    Problem is, when I refresh the services, the OracleServiceXE is still showing as STARTED.
    If I use the listener control to stop the listener the Windows service OracleXETNSListener changes status to BLANK.
    Why is this?

    tvCa-Oracle wrote:
    That service is a prerequisite Windows service to be able to start the database, but it is not the status of the database itself.
    When you do start the database, he may or may not start the service automatically (not sure there), but it is a needed service, for each database SID, on Windows.
    If you want to know what it is, open Task Manager or Process Explorer, only start the service (not the database), and see which OS process is launched.
    AFAIK, this is only on Windows, there's no comparable component on Linux/Unix for this.
    The Windows service OracleServiceXE has c:\app\oracle\product\11.2.0\server\bin\ORACLE.EXE XE as the Parth to executable.
    If I click on the Services tab in Task manager, then right-click the OracleServiceXE and click Go to process, it show the oracle.exe in the processes tab.
    If stop it, the service, from the Windows service control, the oracle.exe disappears and we cannot login to the DB.
    If we start the service from the windows service control, the oradim.exe appears, then a second later the oracle.exe appears. Once the DB status of the Windows service is STARTED, the oradim.exe disappears.
    So, I can start and stop the oracle DB with the Windows service. But If I stop the DB from sql*plus the the service is not stopped....

  • Computer restarts (does not shutdown) when iPod is connected

    This issue has probably been covered in these forums,
    but I didn't read anything about this.
    My Computer (G4 on Tiger) restarts (does not shutdown) when my iPod Classic 30GB is connected
    via USB. Is that normal? Everytime I shutdown my computer and I forget to disconnect my iPod
    it restarts. The problem is that my G4 is connected to my sound system and I hear the loud opening BONG sound when the OS boots up. Very annoying, and dangerous for my speaker system...
    I know there are third party utilities that enables users to kill that start up sound but if I repair permissions, clean PRAM, etc those settings are removed and the original Apple factory settings come back. Is there any way to kill that sounds PERMANENTLY! with Mac OS Tiger.
    Thanks

    Hmm... You might want to consider posting this in the OS X forum as well. I know with my MacBook (running Leopard), if I mute the system volume prior to shutting down the computer, the next time I boot up, I don't hear the startup chime.
    It's not normal for your computer to restart itself coinciding with iPod actions. Do you have any other software applications installed that interact with the iPod that might be causing this?
    CG

  • DB2 instance shutdown when running offline backup

    Dear Expert,
    After doing some maintenance (upgrade firmware and db2 relocate), the db2 procesess were shutdown when doing offline backup. Please see the message captured in db2diag.log:
    2009-06-14-08.06.20.905317+420 E363402871A510     LEVEL: Severe
    PID     : 426016               TID  : 1           PROC : db2gds 0
    INSTANCE: db2p01               NODE : 000
    FUNCTION: DB2 UDB, oper system services, sqloEDUCodeTrapHandler, probe:10
    MESSAGE : ADM0503C  An unexpected internal processing error has occurred.  ALL
              DB2 PROCESSES ASSOCIATED WITH THIS INSTANCE HAVE BEEN SHUTDOWN.
              Diagnostic information has been recorded.  Contact IBM Support for
              further assistance.
    2009-06-14-08.06.20.905881+420 E363403382A642     LEVEL: Severe
    PID     : 426016               TID  : 1           PROC : db2gds 0
    INSTANCE: db2p01               NODE : 000
    FUNCTION: DB2 UDB, oper system services, sqloEDUCodeTrapHandler, probe:20
    DATA #1 : Signal Number Recieved, 4 bytes
    6
    DATA #2 : Siginfo, 64 bytes
    0x0FFFFFFFFFFFD270 : 0000 0006 0000 0000 0000 0009 0000 0000    ................
    0x0FFFFFFFFFFFD280 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    0x0FFFFFFFFFFFD290 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    0x0FFFFFFFFFFFD2A0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    2009-06-14-08.06.20.922545+420 I363404025A371     LEVEL: Severe
    PID     : 647618               TID  : 1           PROC : db2sysc 0
    INSTANCE: db2p01               NODE : 000
    FUNCTION: DB2 UDB, base sys utilities, sqleChildCrashHandler, probe:15
    MESSAGE : DiagData
    DATA #1 : Hexdump, 15 bytes
    0x0000000100009834 : 416E 2045 4455 2063 7261 7368 6564 2E      An EDU crashed.
    2009-06-14-08.06.20.923399+420 I363404397A359     LEVEL: Severe
    PID     : 647618               TID  : 1           PROC : db2sysc 0
    INSTANCE: db2p01               NODE : 000
    FUNCTION: DB2 UDB, base sys utilities, sqleChildCrashHandler, probe:16
    MESSAGE : DiagData
    DATA #1 : Hexdump, 4 bytes
    0x0FFFFFFFFFFFD9E4 : 0006 8020                                  ...
    Error report (ERRPT):
    LABEL:          CORE_DUMP
    IDENTIFIER:     C69F5C9B
    Date/Time:       Sun Jun 14 08:06:20 THAIST 2009
    Sequence Number: 1621
    Machine Id:      0006A03FD600
    Node Id:         tdsprd01
    Class:           S
    Type:            PERM
    Resource Name:   SYSPROC
    Description
    SOFTWARE PROGRAM ABNORMALLY TERMINATED
    Probable Causes
    SOFTWARE PROGRAM
    User Causes
    USER GENERATED SIGNAL
            Recommended Actions
            CORRECT THEN RETRY
    Failure Causes
    SOFTWARE PROGRAM
            Recommended Actions
            RERUN THE APPLICATION PROGRAM
            IF PROBLEM PERSISTS THEN DO THE FOLLOWING
            CONTACT APPROPRIATE SERVICE REPRESENTATIVE
    Detail Data
    SIGNAL NUMBER
               6
    USER'S PROCESS ID:
                    426016
    FILE SYSTEM SERIAL NUMBER
              20
    INODE NUMBER
            4098
    CORE FILE NAME
    /db2/P01/db2dump/c426016.000/core
    PROGRAM NAME
    db2sysc
    STACK EXECUTION DISABLED
               0
    COME FROM ADDRESS REGISTER
    PROCESSOR ID
      hw_fru_id: N/A
      hw_cpu_id: N/A
    ADDITIONAL INFORMATION
    pthread_k 88
    praise 6C
    raise 38
    abort B8
    sqloEDUSI 260
    Symptom Data
    REPORTABLE
    1
    INTERNAL ERROR
    0
    SYMPTOM CODE
    PCSS/SPI2 FLDS/db2sysc SIG/6 FLDS/sqloEDUSI VALU/260
    LABEL:          CORE_DUMP
    IDENTIFIER:     C69F5C9B
    Date/Time:       Sun Jun 14 08:06:20 THAIST 2009
    Sequence Number: 1620
    Machine Id:      0006A03FD600
    Node Id:         tdsprd01
    Class:           S
    Type:            PERM
    Resource Name:   SYSPROC
    Please advice, what's going on with the database.
    Your feed back is greatly appreciated.
    Thanks and Regards,
    Rudi

    LABEL:          CORE_DUMP
    IDENTIFIER:     C69F5C9B
    Date/Time:       Sun Jun 14 08:06:20 THAIST 2009
    Sequence Number: 1621
    Machine Id:      0006A03FD600
    Node Id:         tdsprd01
    Class:           S
    Type:            PERM
    Resource Name:   SYSPROC
    Description
    SOFTWARE PROGRAM ABNORMALLY TERMINATED
    Probable Causes
    SOFTWARE PROGRAM
    User Causes
    USER GENERATED SIGNAL
            Recommended Actions
            CORRECT THEN RETRY
    Failure Causes
    SOFTWARE PROGRAM
            Recommended Actions
            RERUN THE APPLICATION PROGRAM
            IF PROBLEM PERSISTS THEN DO THE FOLLOWING
            CONTACT APPROPRIATE SERVICE REPRESENTATIVE
    Detail Data
    SIGNAL NUMBER
               6
    USER'S PROCESS ID:
                    426016
    FILE SYSTEM SERIAL NUMBER
              20
    INODE NUMBER
            4098
    CORE FILE NAME
    /db2/P01/db2dump/c426016.000/core
    PROGRAM NAME
    db2sysc
    STACK EXECUTION DISABLED
               0
    COME FROM ADDRESS REGISTER
    PROCESSOR ID
      hw_fru_id: N/A
      hw_cpu_id: N/A
    ADDITIONAL INFORMATION
    pthread_k 88
            Recommended Actions
            RERUN THE APPLICATION PROGRAM
            IF PROBLEM PERSISTS THEN DO THE FOLLOWING
            CONTACT APPROPRIATE SERVICE REPRESENTATIVE
    Detail Data
    SIGNAL NUMBER
               6
    USER'S PROCESS ID:
                    426016
    FILE SYSTEM SERIAL NUMBER
              20
    INODE NUMBER
            4098
    CORE FILE NAME
    /db2/P01/db2dump/c426016.000/core

  • When i shutdown i get below err

    When i shutdown i get below err
    SQL> select status from v$instance;
    STATUS
    MOUNTED
    SQL> shutdown;
    ORA-01109: database not open
    Database dismounted.
    ORACLE instance shut down.
    Please tell i am not sure what to do as everthing seems to be fine

    ORA-01109: database not open
    is not a error, but warning.
    There are no problem, if there were only this message.
    ORA-01571: redo version 9.2.0.0.0 incompatible with ORACLE version 8.1.0.0.0
    This is problem.
    What did you do? Did you upgrade the database?
    You might fix it by making 'compatible' initial parameters sure.
    Which do you use pfile and spfile?
    Can you post follwing results?
    sqlplus /nolog
    SQL> connect sys/password as sysdba
    SQL> startup nomount
    SQL> show parameters pfile
    (1) If you get NO VALUE, you use pfile. (I think your database is this case).
    -->> shutdown, make backup (all datafiles,control files,logfiles, pfile),
    edit your pfile as follows, and then try to startup
    compatible=9.2.0.0.0
    (2) If you get some VALUE, you use spfile.
    -->> shutdown, make backup (all datafiles,control files,logfiles, spfile).
    sqlplus /nolog
    SQL> connect sys/password as sysdba
    SQL> startup nomount
    SQL> alter system set compatible=9.2.0.0.0 scope=spfile;
    SQL> shutdown
    SQL> startup
    Or...
    Cause: This software version cannot read the current redo logs, and either crash recovery is required or there are offline database files that need media recovery. If a file name is listed then it needs media recovery.
    Action: Shut down and restart using the compatible software. Do any required media recovery, and open the database. Shut down and restart using the current software. If the file is going to be dropped then take it offline with the DROP option to skip this check.
    Please post these kind of issues to [url http://forums.oracle.com/forums/forum.jspa?forumID=61]Database - General on next time.

  • Macbook froze while online. hard shutdown. when it restarted, an error message appeared saying finder shut down unexpectedly containing a message box with a long list of technical jibberish.  after clicking OK that it would send an error report to Apple,

    macbook froze while online. hard shutdown. when it restarted, an error message appeared saying finder shut down unexpectedly containing a message box with a long list of technical jibberish.  after clicking OK that it would send an error report to Apple, the same error message box appeared again and again every time OK was clicked.  Now the macbook will not turn on at all

    If you're able to boot, launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
    If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Safe mode is slower than normal, and some things won’t work at all.
    Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.

  • Kernel module not properly unloaded at shutdown

    Hello everyone,
    I guess I have found the solution to my problem described in the following topic: https://bbs.archlinux.org/viewtopic.php?pid=1215504. It's about my headphone output not working when booting from Arch to Windows 7.
    When I unload the module manually with:
    modprobe -r snd_hda_intel
    Sound with Windows 7 works perfectly (without removing the battery from my laptop!).
    Now I would like to know, how to properly unload this module before powering off the machine?

    graysky wrote:Never heard of that since rebooting should clear hardware states, no?  In any case, why not run an `rmmod snd_hda_intel` via systemd on shutdown?
    Yeah, seems like if you require a hack/workaround for this, it would be easy enough to set up.  You could use a systemd.service for this, but I would probably go the even easier route and just drop a one line script in /usr/lib/systemd/system-shutdown.

  • Can not logout, restart or shutdown

    I have a Mac running 10.5.8. I have seen this on different models as well.
    The user can not logout, restart or shutdown. When those commands are selected in the GUI nothing happens.
    In the past the only way I could fix it was to create a new profile. There must be an easier way. does anyone know which files I should delete instead of having to create a new profile?

    Richard Saunders wrote:
    The user can not logout, restart or shutdown. When those commands are selected in the GUI nothing happens.
    I'd launch the Console utility and look for messages that might explain the cause of the problem. You might find that it's due to a process that refuses to quit.

  • Firefox on Win 7 64 won't shutdown when closed. how do I fix this?

    On Win 7 64 bit Home Premium version my Firefox won't shutdown when I close it. This started since the upgrade to version 29. It is very annoying to have to go to the task manager and stop the process in there every time I exit Firefox. How to I correct this? I have uninstalled and reinstalled Firefox, but that does not solve the problem.

    From what I have been reading from other posts on this forum, the issue may
    be caused by the clear history settings.
    Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
    Then '''Tools > Options > Privacy'''.
    The button next to '''History''', select '''Use Custom Settings'''.
    At the bottom of the page, turn on '''Clear History When Firefox Closes.'''
    At the far right, press the '''Settings''' button. Turn on ONLY '''Cache''' and
    '''Form And Search History''' leaving the others off.
    This is not a cure but will make it easier if Firefox locks up.
    '''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s''' {web link}

  • If the database is shutdown when the applcation is running what is happened

    I am using coneection pool to connect database. If the database is shutdown when the applcation is running what is happened? and how the database will be reconnected.
    I am using MySQL 3.23.52, Tomcat 4.1.12

    Hi,
    Performance of any n-tier system which takes the advantage of connection pooling will be much higher compared to its non-pooled counterpart.
    You have to be very careful while designing/using a connection pool.if u are using pool obtained from a third party,ur control on this pool will be limited - with a few set/get methods.
    A well designed pool wont create much trouble. if u are creating your own pool, basic steps required are
    1.create 'n' number of connections
    2.whenever user requests for a connection, check the validity of the connection- by sendin a simple select query etc- and if its not stale,give this connection to the caller.
    3.if the connection is stale ie it fails the pretest, close all the connections and create the pool afresh.
    4.connections obtained from the pool will be automatically returned back to the pool whenever the applciation call conn.close().
    from ur application, follow the steps for each connection you use (not necessary for a well designed pool)
    1.call ds.getconnection()
    2.check validity of this connection by sending a simple select query.if it works,everything is fine. otherwise something is wrong with connection(not always).
    3.sql exception may occur during the execution of sql query. this can be due to either
    a.database shut down (network related)
    b.database specific - like wrong query,invalid objects etc
    you have to look at the sql state/vendor code (which can be retrieved from the caught exception). the retrieved code will give you a hint why the error (network or database specific).and you can act accordingly.
    Most of the app servers comes with builtin connection pooling module. and handling stale connection is not a difficult task for the programmer. eg: if you are designing applcations for IBM websphere, you can use StaleConnectionException in your code.if this exception is caught,the whole pool is destroyed and created afresh.
    HTH,
    -asharafkk

  • Auto-Shutdown when ATV3 Sleeps?

    Hey Guys,
    Hopefully I've got the right place.
    I'm wanting to know if there is a way I can set my computer to auto-shutdown when the apple TV3 is put to sleep?
    Running Windows XP
    I can set a task to schedule a shut-down at a specific time, but this wont always be the best option as partner can stay up lat and watch it.
    Guess I'm just wondering if there's some advanced script or anything that will pick-up on itunes when its in sleep mode, and then set computer for shutdown?
    And maybe just another thing to note, the drop down box below for product doesn't even have ATV3 listed haha
    Tks
    Steve

    >I'm talking about a setting on my computer to shut itelsef down
    All computers can already be set to do that.
    >Setting the computer to shutdown on idle is an on-going argument I guess as well
    Argument about what?  This is a standard feature on any computer and has been for over a decade.  If you would like to take adavanage of it then set it to do that.
    >Is streaming considered the computer being in idle mode?
    No, the computer is actively running to server content and is receiving constant WAKE_ON_LAN requests.
    >Becuase it's just sitting there not doing anything
    Not true.  It is serving the content which is a VERY active process.

  • My Pc shutDown When Running Game Then Bettery Be Hot. Please Help Me Fast

    My Pc shutDown When Running Game Then Bettery Be Hot.
    Like iM Play FaceBook Game'S FarmVille Etc Or AnyGame Like San Andreas MultiPlayer / Online Games...... After 10-20 Mnt My Pc ShutDown i ReFormated iT But The Same Problem . Here My Computer Details Please Help Me .. .. . . . . . ..  .. . . . . .. . .. . . . .  i Need Help .. . .. . .. .. . . . .. . .. .. . . ..
    http://img204.imageshack.us/img204/4028/detailsb.png
    Please Help Me i Need Fast Help .... . . . . . . .... .. . .. . .. . . .. . . . .. ..  .. . . .
    subject edited by moderator.
    ps: no need to add "not solved" tag into the subject. 

    Hi and welcome to the forum!
    Which lenovo notebook is it? Does it have a sticker on the bottom bearing a number like 2668-KHU? Let us know that number, there is no need to post S/N though.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • HT201250 How do you stop a Macbookpro with OSX 10.7.5 from turning off or logging off before timemachine is finished with the backup even though I have changed settings for energy management to "never" shutdown when plugged in to an outlet?

    My problem is my Macbookpro mid 2010 with OSX 10.7.5 seems to turn off or logs off before timemachine is finished with the backup even though I have changed settings for energy management to "never" shutdown when plugged in to an outlet?

    I had this problem on an IMac and I finally found a solution in an unlikely place. The problem was a security setting. I don't remember right this moment the exact setting and I am not on that machine right now but when I am I will try to retrace my steps to the fix. In the meantime check your security settings and any browser or browser extensions for computer log off settings. These settings are intended to prevent unauthorized use and incidentally screw up your backups. Hope this helps.

Maybe you are looking for

  • Recaptcha not working blank associated values

    I have two issues it seems and any help would be appreciated.  on the page www.socalda.org/meetfrm.php I built a form in Dreamweaver to add meeting changes and then the information is sent to me and one other person in charge of the material.   The f

  • Photoshop Elements 11 won't open

    Just downloaded PSE11; can't get it to open. Desktop icon does nothing; starting it from the .exe file gets things going, but when it reaches the 'initializing' phase, up pops an error message: "Adobe Photoshop Elements 11 has stopped working. A prob

  • Sharing music with Itunes and windows XP

    Hi Everyone, I am new to this group, but couldn't find anywhere else to ask for help!! I have searched this database, but could not find an answer that worked for my problem! I am PC based and have several computers all running windows 2000. They all

  • Configure Document Management system in ECC.

    Hi,      We have an ECC 5.0 system, and need to configure DMS. Our concern is to upload documents ( type PDF ) and allow the users to access these documents.      We want to import the documents into the R/3 system.      We are new to this. Kindly do

  • Routine in Infopackage selection

    Hi, We are using DB Connect and hence we need to write a routine in Infopackage selections to restrict the data to be extracted. In the source file, there is a field called " Time stamp". This is a Char 23 field with mm-dd-yyyy-hh.mm.ss.sssss format.