10g listener cannot start after install 11g

Hi,
I install 11g R2 into one of 10g windows 2003 server, but I did not perform upgrade, I want the 11g coexists with 10g.
But after I install 11g and create a new 11g instance, I found that the listener cannot be started, until I change the environment variable ORACLE_HOME
of windows to 11g home directory.
But when I reboot my server, I found that the old 10g listener cannot be started,
the services cannot be started and if I try to start the listener in command "lsnrctl start", error TNS-12560: TNS:protocol adapter error prompt.
So I changed the ORACLE_HOME environment variable to 10g home directory again and the listener can be started.
And when I want to start 11g listener, I will have to change again the ORACLE_HOME environment variable to 11g home directory.
Is this a normal behaviour to have 11g and 10g co-exists in one server?
Thanks
Vincent

pj**** wrote:
Hi,
I install 11g R2 into one of 10g windows 2003 server, but I did not perform upgrade, I want the 11g coexists with 10g.
But after I install 11g and create a new 11g instance, I found that the listener cannot be started, until I change the environment variable ORACLE_HOME
of windows to 11g home directory.
But when I reboot my server, I found that the old 10g listener cannot be started,
the services cannot be started and if I try to start the listener in command "lsnrctl start", error TNS-12560: TNS:protocol adapter error prompt.
So I changed the ORACLE_HOME environment variable to 10g home directory again and the listener can be started.
And when I want to start 11g listener, I will have to change again the ORACLE_HOME environment variable to 11g home directory.
Is this a normal behaviour to have 11g and 10g co-exists in one server?
Thanks
Vincentonly 1 listener is needed on any DB Server & the listener should be for the highest version of Oracle DB Server

Similar Messages

IPhoto cannot start after installing Lion

iPhoto v 9.1.5 will not start after installing Lion
The app is installed on the main disk in the default location (vs. problems others are having after Lion install)
I can't find any updates for Lion or iphoto to fix this problem
Error log posted below ...
Process:         iPhoto [2680]
Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:      com.apple.iPhoto
Version:         9.1.5 (9.1.5)
Build Info:      iPhotoProject-6150000~1
Code Type:       X86 (Native)
Parent Process: launchd [149]
Date/Time:       2011-07-24 08:04:31.660 -0500
OS Version:      Mac OS X 10.7 (11A511)
Report Version: 9
Interval Since Last Report:          39908 sec
Crashes Since Last Report:           9
Per-App Crashes Since Last Report:   3
Anonymous UUID:                      18AE49DC-DF10-4143-94CD-27B7C9077A57
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /Library/Frameworks/iLifeFaceRecognition.framework/Versions/A/iLifeFaceRecognit ion
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not found
Binary Images:
    0x1000 -   0xeffff7 com.apple.iPhoto (9.1.5 - 9.1.5) <65AA38DF-C3AF-A06F-62AA-254A854FA060> /Applications/iPhoto.app/Contents/MacOS/iPhoto
0x1056000 - 0x1136fe7 org.python.python (2.6.6 - 2.6.6) <2683D847-5FC7-3F47-816E-D1CB71594F4F> /System/Library/Frameworks/Python.framework/Versions/2.6/Python
0x1181000 - 0x11aafff com.apple.iPhoto.Tessera (1.1 - 48.10) <39FACFA3-C1A1-CC57-9874-CF0E2EB0684C> /Applications/iPhoto.app/Contents/Frameworks/Tessera.framework/Versions/A/Tesse ra
0x11c3000 - 0x11eaff3 com.apple.iPhoto.Tellus (1.3 - 48.10) <BE3ADEF1-C058-3660-60C5-5AC69CD5414D> /Applications/iPhoto.app/Contents/Frameworks/Tellus.framework/Versions/A/Tellus
0x1209000 - 0x1213ff7 com.apple.iphoto.AccountConfigurationPlugin (1.1 - 1) <44FEAB1C-0E0B-7E80-82A5-5CF6287CF5DF> /Applications/iPhoto.app/Contents/Frameworks/AccountConfigurationPlugin.framewo rk/Versions/A/AccountConfigurationPlugin
0x8fee7000 - 0x8ff199c7 dyld (195.5 - ???) <134323A7-49DC-3A9D-ACFD-32FAD0FD6BA2> /usr/lib/dyld
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.52f9
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.55.4-P2P
Bluetooth: Version 2.5.0f17, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD5000AAKS-40V2B0, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GA11N
USB Device: EyeTV Hybrid, 0x0fd9, 0x0027, 0x24300000 / 3
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 2
USB Device: iPod, apple_vendor_id, 0x1299, 0x26200000 / 3
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 4

There was a fix suggested over on this thread. I didn't want to re-post the answer since it is not mine - rather it was my thread with the same question.
https://discussions.apple.com/message/15735275

Keep beeping, cannot start, after installing security update. Please help.

I just apply the security update today in my MacBook (aluminum), but then the laptop cannot start.
When starting, it beeps 3X, pauses, then beeps 3X, pauses, and so on - never stops.
I press the power button to stop, but when pressing the power button back on, this keeps happening.
Does somebody also have this kind of issue? What should I do?
Sorry if I may have repeated other reports, I just cannot find here. I googled a bit and somebody tells that beeping 3X relates to graphics device problem. What should I do with this?
Thanks

Hi T,
Yes, that is the key we all are getting while the announced shows the key first presented in the update released as 2010-001, back in January. Nothing else reported besides the SHA1 diff.
I am sorry to tell you but this issue would hardly, if not ever, be related to the update. It seams to be the hardware fault in fact, test each memory in each slot, one at a time trying to boot the 4 times, 3 in the case, you are already up with this mem/slot combination.
Good luck.

DBConsole Service doesn't start after Install OAS F&R-Services Win 10g

Windows DBConsole Service doesn't start after Install OAS F&R-Services
Hello,
we have installed:
WINDOWS Server 2003 with SP 2
Oracle 10.2.0.1
OAS F&R Services 10.1.2.0.2
after Install DBR2 EM / DBConsole did work
after Install OAS F&R-Service
the windows-service for DBConsole
doesn't start, return with an Error Code 2
see below
the file named emdbconsole.nohup from output log
is not to find
the ias_console does work fine
OAS F_R-Services do work too
whats may be wrong ?
regards
Norbert
OracleDBConsoleorclsrvc.log :
EMDROOT=D:\oracle\product\10.2.0\db_1
ORACLE_HOME=D:\oracle\product\10.2.0\db_1
EMDSTATE=D:\oracle\product\10.2.0\db_1\kfin_orcl
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
12/14/09 13:13:08 Start pending...
12/14/09 13:13:08 Verifying dbconsole is not started already. Command line "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
12/14/09 13:13:09 dbconsole launch commandline is "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
12/14/09 13:13:09 Tracking process launch...
12/14/09 13:13:39 dbconsole exited with retCode 2.
12/14/09 13:13:39 Check D:\oracle\product\10.2.0\db_1\kfin_orcl\sysman\log\emdbconsole.nohup for details
Edited by: astramare on Dec 15, 2009 8:43 AM

Hi,
1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
cd %ORACLE_HOME%\bin
emctl stop dbconsole
2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
Change line from:
tracelevel.main=WARN
To
tracelevel.main=DEBUG
Decomment this line, so that the line becomes :
EMAGENT_PERL_TRACE_LEVEL=DEBUG
3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
Change line from:
log4j.rootCategory=WARN, emlogAppender, emtrcAppender
To
log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
5. Start the dbconsole and upload the output of each command
- start the dbconsole: "emctl start dbconsole"
- issue "emctl clearstate"
- status the dbconsole: "emctl status dbconsole"
- check the status of the agent until it comes up: "emctl status agent"
- force an upload: emctl upload
6. Check If you are able to view the dbconsole Page & login
check below logs may be you can see the close error messages to solve the issue.
<ORACLE_HOME>/<hostname_sid>/sysman/log directory
<ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
Thanks.

Ipod touch for Christmas, but cannot get started: after installing itunes, when connecting to my laptop I get no instruactions, just the error message "This iPod cannot be used because the Aplle Mobile Device service is not started". Any suggestions???

ipod touch for Christmas, but cannot get started: after installing itunes, when connecting to my laptop I get no instruactions, just the error message "This iPod cannot be used because the Aplle Mobile Device service is not started". Any suggestions???

Jennifer...
Follow the instructions here > iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Mac Mini won't start after installing OS X 10.6.3

My Mac Mini won't start after installing Mac OS X Snow Leopard 10.6.3. When I turn it on, the Apple logo appears and the initialization line starts to fill, but it suddenly stops. It does that again and stops at the same point, but this time it shuts down. What should I do?

If you are coming from 10.5.8, hopefully you backed up your important data first. Your mini will need at minimum, 1 GB of RAM to install Snow Leopard and at least 5 GB of storage remaining on your boot drive.
I treat 10.6.3 as a fresh, full install over a 10.5.8 system. That means I choose Disk Utility from the Installer's menu and repartition the boot drive as a single partition, Mac OS X Extended (Journaled) format, and use the GUID partition scheme from the options button. At this point, while still in Disk Utility, I would verify the drive under First Aid.
Then I turn the installer loose, and reboot into a working 10.6.3 system, ready for the software updates that take the machine to 10.6.8.
So, following the above guidelines, reinstall 10.6.3.

TS1702 My problem started after installing smartsync which is supposed to sync my phone with the profilepage photos of my friends in facebook. All my apps crash after using them for awhile. I have remove the smartsync app but my phone still behaves the sa

My problem started after installing "smartsync app" which is supposed to sync my phone with the profilepage photos of my friends in facebook. All my apps crashed after using them for awhile.While using my apps, they will black out after a little while and the phone returns to the starting page. I have removed the smartsync app but my phone still behaves the same way. At the same time the dates that accompany my messages changed to another language. How can these be rectified?

Eek. Sounds like something in the app caused some serious software issues. You can try a hard reset, but I'd imagine you're probably going to have to do an iTunes restore to get it running right again.

When I export audio to movie the result is just very much noice. The problem started after installing Lion

When I export audio to movie the result is just very much noice. The problem started after installing Lion
I'm using latest version of Logic 9 in 32 bit

Please - gotta bump this because I'm really desperate to get this working.
Any help or ideas .....?

HT1199 my computer displays grey screen and apple logo for 10 minutes or more during start up and shut down. sometimes it refuses to shut down . this issues started after installing OS lion. what do i do?

my computer displays grey screen and apple logo for 10 minutes or more during start up and shut down. sometimes it refuses to shut down . this issues started after installing OS lion. what do i do?

I don't think it's exactly an incomplete installation brody, but most likely in-correct permissions somewhere along the line that either happened, or became magnified during the upgrade. Also, it could be corruption as well.
First thing to do, is boot up holding down Shift key to do a safe-boot so we an clean up any corrupted OS caches, after that do another reboot, but go to the Lion recovery, and scan the HD for errors, repair any if you find them, and then try to do a Repair Permissions job.
That should fix the issue, if not, we can start doing a PRAM reset and SMC for good measure.

Safari won't start, after installing X Lion

Safari won't start, after installing X Lion

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Why the listener cannot start? All seems OK

Why the listener cannot start? It seems no problems.
[oracle@localhost database]$ lsnrctl status
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 18-JUL-2009 10:46:33
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.109)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
[oracle@localhost database]$ lsnrctl start listener
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 18-JUL-2009 10:47:00
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.109)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 104: Connection reset by peer
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.109)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
[oracle@localhost admin]$ cat listener.ora
# listener.ora Network Configuration File: /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = db1)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(SID_NAME = db1)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.109)(PORT = 1521))
[oracle@localhost admin]$ cat tnsnames.ora
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/10.2.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
DB1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.109)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = db1)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
[oracle@localhost admin]$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:13:21:C7:21:F1
inet addr:192.168.0.109 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::213:21ff:fec7:21f1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:11748 errors:0 dropped:0 overruns:0 frame:0
TX packets:3354 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:792680 (774.1 KiB) TX bytes:155584 (151.9 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8335 errors:0 dropped:0 overruns:0 frame:0
TX packets:8335 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3326132 (3.1 MiB) TX bytes:3326132 (3.1 MiB)
peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:11747 errors:0 dropped:0 overruns:0 frame:0
TX packets:3354 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:839608 (819.9 KiB) TX bytes:225672 (220.3 KiB)
Interrupt:17
vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:3354 errors:0 dropped:0 overruns:0 frame:0
TX packets:11748 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:155584 (151.9 KiB) TX bytes:792680 (774.1 KiB)
xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:11618 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:614983 (600.5 KiB) TX bytes:0 (0.0 b)

Thank you
You are right. Doing according to you conduct, the Listener is started. But EM console cannot be started any more.
How to do next?
[oracle@host admin]$ emctl start dbconsole
TZ set to US/Eastern
Exception in getting local host
java.net.UnknownHostException: host: host
at java.net.InetAddress.getLocalHost(InetAddress.java:1191)
at oracle.sysman.emSDK.conf.TargetInstaller.getLocalHost(TargetInstaller.java:4977)
at oracle.sysman.emSDK.conf.TargetInstaller.main(TargetInstaller.java:3758)
Exception in getting local host
java.net.UnknownHostException: host: host
at java.net.InetAddress.getLocalHost(InetAddress.java:1191)
at oracle.sysman.emSDK.conf.TargetInstaller.getLocalHost(TargetInstaller.java:4977)
at oracle.sysman.emSDK.conf.TargetInstaller.main(TargetInstaller.java:3758)
OC4J Configuration issue. /u01/app/oracle/product/10.2.0/db_1/oc4j/j2ee/OC4J_DBConsole_null_db1 not found.
Edited by: junez on Jul 18, 2009 9:05 AM

Installation of Oracle 11g on RHEL 5 (Listener cannot start )

Hello,
I have install Oracle 11g on my linux RHEL5. The installation was succesfull but cannot start the listener. The configuration of even the EM at the end of the installation for the same reason , Listener not started.
Trying to connect to my Listener i got the following error
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=karen)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCPS)(HOST=karen)(PORT=2484)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
LSNRCTL> start
Starting /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr: please wait...
TNS-12537: TNS:connection closed
TNS-12560: TNS:protocol adapter error
TNS-00507: Connection closed
Linux Error: 29: Illegal seek
Can Some help troubleshoot this problem.
Thanks

Dear bezgodo!
Please execute the following commands and compare the results.
1.
hostname --fqdn2.
nslookup <your_ip_address>In both cases you should see the fully qualified hostname of your server.
Yours sincerely
Florian W.

System not started after installing grid control

HI,
I have installed grid control 10.2.0.1 on 11g r2 on rhel5.After installing grid control, whenever system get booted, it got hanged and saying
after starting up the listener
sql>ora-01078: failure in processing system parameters
LRM-00109:could not open parameter file '/raczone/init%s_reposSID.ora'
sql>disconnectdfailed
opmnctl:starting opmn and all managed process...
CRS-4124: oracle high availability services startup
crs-4000:command start failed, or completed with errors>

Hi,
Thanks for the reply!!!
I have installed 11g grid infra on 2 nodes and then try to install 10g grid control on node 1 but when i am booting my system it got hanged and throw an error:
sql>ora-01078: failure in processing system parameter
LRM-00109:could not open parameter file '/raczone/init%s_reposSID.ora'
sql>disconnectdfailed
opmnctl:starting opmn and all managed process...
CRS-4124: oracle high availability services startup
crs-4000:command start failed, or completed with errors>
then i have to forcefully bring down the system and started the linux in a single user mode and thereover i have to move or rename the dir to some other location,then only system get started.after starting up the system i have to again move or rename the grid control dir to org location.
So my question is which file or dir is forcing system to startup the grid control on boot?

Report service doesn't start after installing 9iAS

Forms are fine after installing 9iAS, but report server doesn't
start, and is not listed in Control Panel, Services.
If I try start it as RWMTS60.exe -install oracledev2 tcpip I got
the error "Please consult the installation guides for how to set
up and run this program", if I start it as RWMTS60.exe -listen
oracledev2 I got the error "Rep 0001:Unable to find the report
builder message file. Please verify your installation". Attempt
to run any Reports product (Runtime, for instance) causes
Dr.Watson on RWRUN60.exe. The registry parameter RW60 points to
the ORACLE_HOME/report60 for the Reports Server that is failing.
What do I do to start Reports ?
Thank you,
Kate

Hi,
1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
cd %ORACLE_HOME%\bin
emctl stop dbconsole
2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
Change line from:
tracelevel.main=WARN
To
tracelevel.main=DEBUG
Decomment this line, so that the line becomes :
EMAGENT_PERL_TRACE_LEVEL=DEBUG
3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
Change line from:
log4j.rootCategory=WARN, emlogAppender, emtrcAppender
To
log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
5. Start the dbconsole and upload the output of each command
- start the dbconsole: "emctl start dbconsole"
- issue "emctl clearstate"
- status the dbconsole: "emctl status dbconsole"
- check the status of the agent until it comes up: "emctl status agent"
- force an upload: emctl upload
6. Check If you are able to view the dbconsole Page & login
check below logs may be you can see the close error messages to solve the issue.
<ORACLE_HOME>/<hostname_sid>/sysman/log directory
<ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
Thanks.

Windows 8.1 is not starting after installing Bluetooth driver

I cannot start Windows 8.1 Pro (64Bit) after enabling Virtualization ( because I need HYPER-V ) from BIOS settings.
It was perfect before installing RaLink Bluetooth Driver update.
I use "HP ENVY 15 Touchsmart j001tx" laptop.
Please have a look on this articles also:
http://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/windows-81-is-not-starting-after-enable/5aee0db6-7cdd-46b7-b85f-f048d9cf5d7e
http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/bluetooth-driver-for-hp-probook-4740s-crashing/633a2200-ecdf-45bb-b643-075650ea3a16
Further information:
HYPER-V and Bluetooth individually works fine. But laptop is not starting up when both are installed. Please help me.
Sushovan Mukherjee

Hi:
If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

10g listener cannot start after install 11g

Similar Messages

Maybe you are looking for