10g not talking to 9i

Hi all;
I installed Oracle 10g alongside an existing 9i installation (WinXP).
After the install I:
- Stopped the services for all db instances.
- Stopped the 9i and 10g listener services.
- Disabled the 9i listener and started the 10g listener.
- Set the value in my 10g sqlnet.ora file from SQLNET.AUTHENTICATION_SERVICES = (NTS) to SQLNET.AUTHENTICATION_SERVICES = (NONE).
I'm not very familiar with Oracle and I have only a couple of databases in 9i and one in 10g.
I'm still able to connect to 9i via SQLPlus but I can't connect to 9i database instances using 10g SQLPlus. The connection attempt (using 10g SQLPlus) times out:
ORA-11270: TNS: Connect Timeout Occurred.
Thanks for any input.
Message was edited by:
JacobsDream

Oracle 10g and Oracle 9i are installed on different ORACLE_HOME, you need to run netca to configure TNSnames that point to 9i instances.

Similar Messages

I cannot find a way to sort the bookmark folders themselves alphabetically by name.I am not talking about in a view mode but in the way they are displayed when I click on my bookmarks tab. Can someone explain to me how to accomplish this.

I have a lot of various book mark folders with websites contained within each folder. I am able to sort the websites within each folder alphabetically by name but I cannot find a way to sort the bookmark folders themselves alphabetically by name.I am not talking about in a view mode but in the way they are displayed when I click on my bookmarks tab. Can someone explain to me how to accomplish this other than manually dragging them as this is extremely hard for me due to the fact that I am a quadriplegic with limited hand movement dexterity

Bookmark folders that you created are in the Bookmarks Menu folder. "Sort" that folder.
http://kb.mozillazine.org/Sorting_bookmarks_alphabetically

MBP suddenly not talking to projector or LCD screen.

After using my MBP 15" at the same venue as before it suddenyl would not talk to the projector (or the other way round), either via TB port or HDMI. It now won't hook up to my LCD screen either. It looks as though the display settings on the MBP are screwed up. I have found a fix online by resetting PRAM (by pressing Option + Command + P +R at start up) but this has only actually worked once. I am currently unable to do presentations and unable to use a desktop LCD. The sleep mode of the MBP also seems to be affected and it often won't wake up. Any solutions or similar issues out there please?

After using my MBP 15" at the same venue as before it suddenyl would not talk to the projector (or the other way round), either via TB port or HDMI. It now won't hook up to my LCD screen either. It looks as though the display settings on the MBP are screwed up. I have found a fix online by resetting PRAM (by pressing Option + Command + P +R at start up) but this has only actually worked once. I am currently unable to do presentations and unable to use a desktop LCD. The sleep mode of the MBP also seems to be affected and it often won't wake up. Any solutions or similar issues out there please?

Itunes 7 and ipod will not talk. No WAY TO RESTORE FACTORY SETTINGS!

Hi,
update to itunes 7, plugged in my ipod and got the message "itunes cannon read the contents of the ipod "IPOD" Go to the Summary tab in ipod prefrences and click Restore to restore the ipod to factory settings".
But there is no ipod prefrences tab in itunes becuase itunes can't read the contents of the ipod! A reset through the ipod did no good!
I am now stuck with a ipod that can not talk to itunes! How can I reset my ipod to factory defaults if itunes does not see it? And no, the old updater does not work, it says you must update through itunes 7.
How do I fix this ?

This is all interesting and much of it consistent with problems I'm having across of the iPODs we have within our household since migrating to iTunes Release 7! Both our past generation and current iPOD can no longer be synched with iTunes. I seriously hope Apple addresses this issue soon! I've tried numerous approaches. I can't get my wife and daughter's iPOD minis to synch at all! My generation 3 I am able to force it to update by unstalling and reinstalling the driver in Windows. Then by uninstalling and reinstalling iTunes. It will then load the music from iTunes on to my iPOD. iTunes will indicate the update is complete but the iPOD will not indicate the update is complete. Appreciate any thoughts or ideas that others may discover to resolve. I'm currently convinced this is an issue with iTunes Release 7 though as I'm not able to get any of our iPODs to work which includes my gen 3, our minis or nanos.
Windows XP
Windows XP

Can I place an image in the Note section of Contact book . I use a MacBook Pro with Yosemite 10.10 . I am NOT talking about using an image to identify the contact, just an image that contains some information relevant to the contact. I have tr

I want to place an image in the Note section of my Contact book . I use a MacBook Pro with Yosemite 10.10 . I am NOT talking about using an image to identify the contact, just an image that contains some information relevant to the contact. I have tried copying and pasting, dragging and dropping.

From reading Vista forums support for SSD is one of the things Vista SP2 and Windows 7 hope (need) to improve upon. I was in a similar discussion once befoe on SSDs:
http://discussions.apple.com/thread.jspa?messageID=8482110
http://news.cnet.com/8301-13924_3-10026010-64.html
http://www.intel.com/design/flash/nand/mainstream/index.htm
http://www.google.com/search?hl=en&rls=com.microsoft%3Aen-US&q=IntelSSDVista
I don't think it is EFI issue, but with XP and drivers, lack, and wonder if you can try with Vista?
http://arstechnica.com/news.ars/post/20080908-intel-tosses-hat-into-ssd-ring-wit h-80gb-launch.html
That won't solve performance issues, but should work.
http://www.reghardware.co.uk/2008/07/22/sandiskssd_vistabeef/
"My guess is that [Samsung and Microsoft] are maybe working on the OS recognizing an SSD with a 4K-byte sector size instead of a hard disk drive with a 512-byte sector size," Wong said.
Sun is already working with Samsung to bulk up SSD support on the ZFS (Zettabyte File System), which is included in the Solaris OS, and will also be supported in Apple's upcoming Mac OS X 10.6, codenamed Snow Leopard. Sun is adding capabilities to boost the durability and performance of SSDs on ZFS-based operating systems. For example, Sun may add defragmentation capabilities for SSDs, which organizes data in a particular order to enable quicker data access.
SSDs were not considered ideal for defragmentation because of limited read-and-write capabilities, Wong said. However, Samsung and Sun in July jointly announced an 8G-byte SSD that bumped up durability from 100,000 read-and-write cycles to 500,000. That brings defragmentation in SSDs closer to reality, which could improve its caching and provide quicker access to data. Sun plans to put SSDs into storage products later this year.
http://www.itworld.com/operating-systems/54115/samsung-microsoft-talks-speed-ssd s-vista

Why is the wifi reception on my iPhone 5 so poor. I'm not talking about in my own home with my own router. I'm talking about AT

Why is the wifi reception on my iPhone 5 so poor. I'm not talking about in my own home with my own router. I'm talking about AT&T hotspots, public hotspots, etc. I can hold my 3GS and my 5 side by side, the 3GS picks up more signals with more strength. The 5 seems to have a weaker wireless network than its predecessors. It's very frustrating because I can be 20 feet from a wireless router, and still only show 2 bars, if I don't end up losing the connection. What gives??

I've done the resets...no real help at all. Im Also on my 2nd iPhone 5. The first was replaced because of a faulty external speaker module. Both phones wifi reception pretty much suck. ESPECIALLY if the case is on. I'll luck out a little bit by taking the case off...but not much.

I have CS5 and LR5. they will not talk anymore. Everything was working 5 days ago. I can no longer access CS5 from LR5 edit, then drop it back into LR5. Need support

I have CS5 and LR5. they will not talk anymore. Everything was working 5 days ago. I can no longer access CS5 from LR5 edit, then drop it back into LR5. Need support

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop ("CS5" won't do for instance; we would need CS5 vers 12.0.2 or whatever) and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

When i turned on my i pod a white apple logo was shown which then turned to rainbow colours and the i pod started buffering, this is all it does, i cannot get it to stop and my computer will not talk to the i pod, help?

when i turned on my i pod a white apple logo was shown which then turned to rainbow colours and the i pod started buffering, this is all it does, i cannot get it to stop and my computer will not talk to the i pod, help?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

NetWeaver XI components are not talking to each other

I am an XI consultant, i dont have proper Basis support at my client, since they are fond of only ABAP stack.
They installed netweaver xi from the market place.
I am unable to import any SWCV (even SAP BASIS) from SLD to IR and IR menu is blank.
Unable to find list of adapters in Integration Directory.
RWB -component monitoring is blank .
SLD- creation of products,SWCV,Technical Sys,Buss Sys is possible.
In conclusion i can say that they all are not co-operative and not talking to each other
And also i want to know wheather xi 7.0 is compatable to databases Oracle 8.0.3 and Oracle 8.0.4

Hi Venkata,
Does the XI post Installation steps done by the team or not? It seems that there is some steps missing while doing the XI installation. Talk to to the BASIS team and tryu to find out the solution.
>>> Unable to find list of adapters in Integration Directory.
Check thisblog for it:
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
>>> And also i want to know wheather xi 7.0 is compatable to databases Oracle 8.0.3 and Oracle 8.0.4
In my view, yes. XI is compatible with all the versions of Oracle Database above version 8 but never tried it.
Reward points if helpful. *
Regards,
Subhasha Ranjan

Photoshop & Bridge not talking

I have Windows 7 and a full membership to Cloud - all software.
For the past week, since the last update of Cloud Desktop, Photoshop requires licence validation every time I start my computer (which is taking a lot of time and shouldn't happen) and every once in a while when I use Bridge and ask to open a RAW image in Adobe Raw, it tells me I need to have a qualifying product to do so. Which I have - Photoshop.
It won't recognize Photoshop:
"Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature."
If I log into Cloud, it shows that I have Bridge and Photoshop as part of my downloads and they are up to date.
What is happening? Why is the software not talking to each other? What's with the constant license checking which is tedious and stops me from getting my work done?

This is a very old discussion but in short, each new camera has its own unique Raw code. Adobe offers free upgrades for ACR (Adobe Camera Raw needed to convert the Raw data to an actual image) several times a year but only for their latest version of Photoshop (in this case PS6 and PSCC)
Here is a list of camera's with compatible versions of ACR:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
And the versions of PS with the ACR versions so you can see the minimum required version you need to match your new camera:
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
For your 5D II this means at least ACR version 5.2 that comes with CS4
You can either use the free Adobe DNG converter to first convert your files to DNG and then handle them in CS2 but you can also try to upgrade and match the technology of the camera with your software.
Besides that, shooting Raw and batch process to tiff without first changes the settings of the Raw file to your custom wishes is sheer pointless. You don't profit from Raw unless you make the effort to first develop the files in ACR to your custom wishes (or use Canon Software that came with your camera which to my opinion is very clumsy and very very slow / unproductive) and then start batch process for further development in PS or whatever.

Why does my iPad I updated to ios7 yesterday not talk to my canon mg4250 today. It worked fine before my upgrade...

Why does my iPad I updated to ios7 yesterday not talk to my canon mg4250 today. It worked fine before my upgrade...

daelitesmom wrote:
I can't update apps via the ipad alone because it doesn't have enough space for the update, and I can't update via the laptop without erasing everything in the process WHICH it does on it's own.
FRUSTRATED in New York
There lies the possible root of the problem. Make sure you keep enough available space for the ipad to update and function properly.

How do I delete apps from my app store on my Iphone? not talking about holding down the app and hiting X to delete. talking about cmpletely deleting from the app store on the phone. Under 'PURCHASED" and "NOT ON THIS IPHONE" ?

How do I delete apps from my app store on my Iphone? not talking about holding down the app and hiting X to delete. talking about cmpletely deleting from the app store on the phone. Under 'PURCHASED" and "NOT ON THIS IPHONE" ?

Also having the same problems here.
Yesterday, I have downloaded the APPSGONEFREE and there is one App called the Victorian Mystery that is still free and i downloaded it. After a few minutes it pop up on my iphone homescreen, it can't be loaded. So I tried to delete it but it cant be deleted. (there is no x mark on top of it). I then use my itunes to synchronize it through my iphone but it wasnt able to delete it. I then bought the apps at apsstore ( Victorian Mystery), which is not free for today and I synchronize and it cant be installed on my Iphone. I just cant delete the APP. I need help.

I am so confused. I am thinking about buying an iPhone 4S but I want to use those card things that you can put the code in for the phone is this possible? I'm not talking about the 50$ unlimited card just the regular 20$ cards that hold mins and texts...

I am so confused. I am thinking about buying an iPhone 4S but I want to use those card things that you can put the code in for the phone is this possible? I'm not talking about the 50$ unlimited card just the regular 20$ cards that hold mins and texts... As long as it has the support for the service it's hooked up to?

As far as I know there is no US cell carrier that allows pay as you go with an iPhone. You can purchase an unlocked iPhone 4S at an Apple Store and try it with a non-supported carrier.

Could not talk to Print Service

I have tried cancelling print jobs and I received the error "could not talk to print service".
I've tried stopping and starting lp and these do not work either.
If anyone has any information, I would appreciate.
Thank you in advance,

Make sure the /etc/inetd.conf file (which should be a symbolic link to /etc/inet/inetd.conf) does not have the "printer" line commented out.
If you're using Solaris 8 or 9, make sure the third field of the "printer" line has tcp6 instead of tcp.
-Greg

NIC card on HCL list, but it's not talking. Why?

Hi, I just finished installing Solaris 10 (11/06) onto my computer. The whole installation installed without errors. Afterwards, I went to the log files and saw that everything seems to have installed OK.
After rebooting, I logged in with the CDE environment. Everything appears normal. I editted my /etc/hosts file accordingly. I hooked up this new Solaris x86 system onto my network. The NIC card is not talking. I can't ping from this new Solaris x86 PC to another system on the existing, working network.
My NIC card is the D-Link DFE-530TX+
This card is on the approved hardward compatibility list.
I have installed Solaris x86 in the past on many PC's without running into this type of problem, until now. Anyone knows what could be causing this problem, or how to know that my NIC card is being recognized by the Solaris x86 system, and how I can make this thing work?
Do you think I need to install additional drivers to make this particular D-Link NIC card work? If so, how do I install it? Thanks in advance.

Is there a NIC that is widely being sold in stores now that will work without needing to install drivers? It would be much easier for me just to go out to the stores and pick up a new NIC.
I live in Silicon Valley, so I can go to stores like Fry's Electronics, Best Buy, MicroCenter, etc.
Also, I already tried using Intel PRO/100 S and the 3COM Etherlink 10/100 PCI (3C905C-TXM). I downloaded a software from SUN, made a bootable CD, and when it scanned my PC, it says that likely my hardware will be compatible with Solaris 10. Yet,
At the beginning of the installing, I see messages like:
Using RPC Bootparams for network configuraton information.
Attempting to configure interface elx10 (or ipbr0)
Skipped interface elx10 (or ipbr0)
Does this mean the NIC won't work?

10g not talking to 9i

Similar Messages

Maybe you are looking for