10g on SuSE 9.1 Pro issue

Hi everybody!
I am a newbie in this area (Oracle & Linux) and I need some help here...
I have succesfuly installed Oracle 10g on SuSE 9.1 Pro (kernel 2.6.4), following the step by step procedures as described by Oracle (oracle user account, dba and oinstall groups, kernel parameters, shell limits, environment variables for the oracle account...) BUT...after rebooting, any connection to the host, nomatter what port(5500,5560 etc), is refused...WHY?...There are no changes in the network configuration, the firewall service is off...
Could somebody give me an advice?
Thanks!

emctl start dbconsole
isqlplusctl start

Similar Messages

10g on SUSE 10. Can I install?

Hi there,
I am trying to install oracle 10g (10.2.0.1) on SUSE 10 SP1 Enterprise. When I tried to run the runinstaller, I got error message saying that it has to be SUSE 9.
Does anybody know if I can put 10g on SUSE 10? if so, how to get around the "check operating system" error? thanks.

The OUI for 10.2.0.x is not up to date for SUSE 10, so you have to bypass OS checks. Execute the installer as
$ ./runInstaller -ignoreSysPrereqs

INstalling 10G on Suse 9.1

Please help!
I'm trying to install oracle 10G on Suse 9.1.
The Oracle installation guide mentioned the sysctl.config file that must to receive a several Kernel parameters to prepare the environmental. But this file just exist on Red Hat, not in Suse distro..
Could someone tell me on the sister file on Suse I need to do the entries?
Thanks in advance.
Eduardo

1) Setting the environment:
ftp://ftp.suse.com/pub/suse/i386/supplementary/commercial/Oracle/orarun-1.8-11_SL80_81.noarch.rpm
2) Installed patch p3006854_10102_LINUX.zip from metalink
3) run the installer and ignore errors ora-27125 during dbca
runInstaller -ignoreSysPrereqs
4) run below command:
cd $ORACLE_HOME/bin
mv oracle oracle.bin
cat >oracle <<"EOF"
#!/bin/bash
export DISABLE_HUGETLBFS=1
exec $ORACLE_HOME/bin/oracle.bin $@
EOF
chmod +x oracle
6) run dbca to create the database.

Oracle 10g on SuSE 9 with kernel 2.6.4

Hi,
i have installed Oracle 10g on SuSE 9 Professional with kernel 2.4.21-192 and it works fine.
For testing purposes i have installed a 2.6.4 Kernel and get the following error on database startup:
SQL> Connected to an idle instance
SQL> ORA-27125: unable to create shared memory segment
Linux Error: 1: Operation not permitted
SQL> Disconnected
Do you have any hints or is the kernel 2.6 not supported.
Thanks Klaus

/* using strace I have narrowed this down to the shmget call for allocating SGA memory. Specifically 2.6 kernel generates a WAIT in this call and Oracle specify IPC_NOWAIT flag, hence the failure condition.*/
#include <sys/types.h>
#include <sys/shm.h>
#include <sys/types.h>
#include <sys/mman.h>
#include <errno.h>
extern int errno;
#define SHM_HUGETLB 04000
#define SGA_SIZE 192937984
#define dprintf(x) printf(x)
#define ADDR 3285588844UL
main()
int shmid;
int i, j, k;
volatile char *shmaddr;
if ((shmid = shmget(ADDR, SGA_SIZE, IPC_CREAT|IPC_NOWAIT|IPC_EXCL|0660) )
< 0) {
perror("IPC_NOWAIT Failure:\nTry without NOWAIT condition");
if ((shmid = shmget(ADDR, SGA_SIZE, IPC_CREAT|IPC_EXCL|0660) )
< 0) {
perror("Failure:");
exit(1);
printf("shmid: 0x%x\n", shmid);
shmaddr = shmat(shmid, (void *)ADDR, SHM_RND) ;
if (errno != 0) {
perror("Shared Memory Attach Failure:");
exit(2);
printf("shmaddr: %p\n", shmaddr);
dprintf("Starting the writes:\n");
for (i=0;i<SGA_SIZE;i++) {
shmaddr[i] = (char) (i);
if (!(i%(1024*1024))) dprintf(".");
dprintf("\n");
dprintf("Starting the Check...");
for (i=0; i<SGA_SIZE;i++)
if (shmaddr[i] != (char)i)
printf("\nIndex %d mismatched.");
dprintf("Done.\n");
if (shmdt((const void *)shmaddr) != 0) {
perror("Detached Failure:");
exit (3);

Installing Oracle 9i R2 on SuSE 8.2 Pro

I am trying to install Oracle 9i Release 2 on SuSE 8.2 Pro.
I receive the following error message in the Universal Installer after selecting General Purpose as the Database Configuration:
"Thrown when the IP address of a host cannot be determined"
Selecting Retry or Continue just rethrows the same error.
I have completed the Tasks to Perform as root User and Tasks to Perform as the oracle User as outlined in the Installation Guide.
Any help in resolving this error would be appreciated.

Hi,
I got the solution ;-)
My problems seem to bee caused by a obvisuously buggy/incompatible version of JRE in oracle's installationfileset.
I resolved the Problem by editing the JRE_LOCATION-variable in Disk1/install/linux/oraparam.ini (see below) to point to the root of my own local installation of Java 2 (java version "1.3.1_02" Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1_02-b02)).
start of the original file:
[Oracle]
DISTRIBUTION=TRUE
SOURCE=../../stage/products.jar
LICENSE_LOCATION=
JRE_LOCATION=../../stage/Components/oracle.swd.jre/1.3.1.0.0/1/DataFiles/Expanded/jre/linux
OUI_LOCATION=../../stage/Components/oracle.swd.oui/2.2.0.12.0/1/DataFiles/Expanded
JRE_MEMORY_OPTIONS=" -mx200m"
modified version:
[Oracle]
DISTRIBUTION=TRUE
SOURCE=../../stage/products.jar
LICENSE_LOCATION=
JRE_LOCATION=/usr/lib/SunJava2-1.3.1/jre
OUI_LOCATION=../../stage/Components/oracle.swd.oui/2.2.0.12.0/1/DataFiles/Expanded
JRE_MEMORY_OPTIONS=" -Xmx300m"
After this change everything worked (besides some minor problems with the installed demo-database).
HTH
Juergen

How to install oracle 10g on suse linux

Hi,
can anybody let me kbow how to install oracle 10.2 on suse linux.....
i have installed suse linux but couldn;t able to install oracle 10g on the same....
looking for gud suggestion.....

These two are good to start with
Installing Oracle Database 10g on SUSE Linux Enterprise Server 9 and on SUSE Linux Professional 9.1, 9.2, and 9.3
http://www.puschitz.com/InstallingOracle10gOnSUSE.shtml
Oracle Products on SUSE Linux Enterprise: Documents
http://www.novell.com/products/server/oracle/documents.html

I installed Oracle database 10g on SuSE Linux Enterprise Server 8 edition.

I installed Oracle database 10g on SuSE Linux Enterprise Server 8 edition.
But this massage pop up when I used my browser first time before start database.
Actually when I clicks on yes to start database.
The web browser you are using is not optimized for this release of Oracle enterprise manager. It is recommended that you use one of the following:
* Microsoft Internet Explorer version 5.5, 6.0 or higher
* Netscape Navigator version 7 and higher
*Mozilla version 1.3.1 and higher
Dose any one know hoe to upgrade mozilla or install internet explorer 5.5, 6.0 or higher or SLES 8.
Regards,
D

You can download package for your distribution (for example) from http://www.mozilla.org or directly from SuSE ftp server ftp://ftp.suse.com/pub/suse/i386/9.1/suse/i586
IE for linux does not exist.

Stopping the Enterprise Manager Console (Oracle 10g on SuSE 9.1)

I'm trying to stop the Enterprise Manager Console by issuing the command:
${ORACLE_HOME}/bin/emctl stop dbconsole
Unfortunately, the command fails to stop the EM Console. Here's the output I get:
TZ set to US/Pacific
Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://<hostname>:5505/em/console/aboutApplication
Stopping Oracle Enterprise Manager 10g Database Control ...
--- Failed to shutdown DBConsole Gracefully ---
failed.
The only way I can stop the EM Console (and related services--i.e., emagent) is to kill its process.
Everything (Listener, DB Instance, EM Console) starts fine. I can stop the Listener and DB Instance without any problems. It's just the EM Console shutdown that doesn't happen cleanly.
Has anyone else encountered the same condition? If so, what was the solution?
Here's my operating environment:
SuSE 9.1 (Kernel 2.6.5-7.108-default)
Oracle 10g
Thanks in advance for any help/insight.

Has anyone else encountered the same condition? If so, what was the solution?Yes. Shutdown/reboot of the system made the error go away.
Sorry, no better clues,
Toni

Error while Oracle 10g Installation suse linux

Hi,
All i am facing issue while installing Oracle 10g release 2 on open suse.
All test are getting passed but getting a error reltated to ip address as follows.
INFO: Checking DetectIfDHCPAssignedIP
This is a prerequisite condition to test whether the primary IP address of the system is DHCP-assiged or static.
INFO: Detecting the IP.....:10.31.215.64
INFO: Checking the network interface display name.... :eth0
INFO: Checking the network reference name..... :eth0
INFO: Checking the platform .......46
INFO: Checking the LINUX vendor .... :SuSE
INFO: Check complete. The overall result of this check is: Not executed <<<<
Also while installing getting error as,
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public
IP addresses. However, the primary network interface on the system should be
configured with a static IP address in order for the Oracle Software to function
properly. See the Installation Guide for more details on installing the software
on systems configured with DHCP.
Please help me to resolve issue.
BR,
Rajesh
Edited by: Rajesh.Rathod on Dec 20, 2010 12:52 AM

Hi,
I tried to follow each step of oracle documentation but network configuration requirement is failing.
please find following log.
Checking operating system requirements ...
Expected result: One of redhat-3,redhat-4,SuSE-9
Actual Result: SuSE-9
Check complete. The overall result of this check is: Passed
=======================================================================
Checking operating system package requirements ...
Checking for make-3.79; found make-3.81-128.14.     Passed
Checking for binutils-2.14; found binutils-2.19.51-10.26.4.     Passed
Checking for gcc-3.2; found gcc-4.4-4.2.     Passed
Checking for libaio-0.3.96; found libaio-0.3.104-144.2.     Passed
Check complete. The overall result of this check is: Passed
=======================================================================
Checking kernel parameters
Checking for semmsl=250; found semmsl=1250.     Passed
Checking for semmns=32000; found semmns=32000.     Passed
Checking for semopm=100; found semopm=100.     Passed
Checking for semmni=128; found semmni=256.     Passed
Checking for shmmax=536870912; found shmmax=3294967296.     Passed
Checking for shmmni=4096; found shmmni=4096.     Passed
Checking for shmall=2097152; found shmall=2097152.     Passed
Checking for file-max=65536; found file-max=131072.     Passed
Checking for VERSION=2.6.5-7.201; found VERSION=2.6.31.5-0.1-desktop.     Passed
Checking for ip_local_port_range=1024 - 65000; found ip_local_port_range=1024 - 65000.     Passed
Checking for rmem_default=262144; found rmem_default=4194304.     Passed
Checking for rmem_max=262144; found rmem_max=4194304.     Passed
Checking for wmem_default=262144; found wmem_default=262144.     Passed
Checking for wmem_max=262144; found wmem_max=262144.     Passed
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Recommended glibc version
Expected result: ATLEAST=2.3.3-98.28
Actual Result: 2.10.1-10.4
Check complete. The overall result of this check is: Passed
=======================================================================
Checking physical memory requirements ...
Expected result: 922MB
Actual Result: 5460MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking available swap space requirements ...
Expected result: 5460MB
Actual Result: 10244MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Actual Result: :java.lang.NullPointerException:Exception/Error Occurred
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
=======================================================================
Validating ORACLE_BASE location (if set) ...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Oracle Home path for spaces...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for proper system clean-up....
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for Oracle Home incompatibilities ....
Actual Result: NEW_HOME
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Actual Result: :java.lang.NullPointerException:Exception/Error Occurred
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
=======================================================================
Please suggest how to resolve.

Macbook Pro issues - can anyone tell if 'normal' or faults

I have some issues with my new 15" 2.66 unibody (non-removable batery) MBP. I'm told by the retailer that they are all normal/common - i'd like see if this is actually the case or they fobbing me off.
1.) Something 'lose' inside the case around hard drive area - ie if i move the mac around (vertically is worst - ie imagine holding it with two hands with hinge sitting downwards, closed) i can hear something fairly hefty clunking back and forth against the inside of the shell (hard drive moving about?)
2.) When i opn the lid for the first time after a period of the mac being closed, i get a reasonable creak/crack from the left side of the screen hinge.
3.) When i run the battery down and it goes to sleep 'to preserve the contents of memory' it doesn't take long at all before battery so low it goes into deep sleep (ie state where all RAM contents are written to disk - and then takes a min or so to come to life again when you open the lid - my old macbook pro could last a good few hours in sleep mode before dying completely and deep sleeping
I'd really like to know if anyone has noticed similar issues with their machines - or if indeed these are isolated issues to a few, aka faults.
Thanks in advance

1.) Something 'lose' inside the case around hard drive area - ie if i move the mac around (vertically is worst - ie imagine holding it with two hands with hinge sitting downwards, closed) i can hear something fairly hefty clunking back and forth against the inside of the shell (hard drive moving about?)
The sudden motion sensor may make the appearance of something bouncing in there as it may activate while the drive is being moved around suddenly. However, if this does not appear to be the case, I'd ask an authorized service center.
2.) When i opn the lid for the first time after a period of the mac being closed, i get a reasonable creak/crack from the left side of the screen hinge.
Is the opening range different from other ones in the store?
3.) When i run the battery down and it goes to sleep 'to preserve the contents of memory' it doesn't take long at all before battery so low it goes into deep sleep (ie state where all RAM contents are written to disk - and then takes a min or so to come to life again when you open the lid - my old macbook pro could last a good few hours in sleep mode before dying completely and deep sleeping
The battery may need calibration at first:
http://www.apple.com/batteries/
If it is calibrated, and you aren't getting the life expected by that link for rudimentary usage, have the power manager looked at.

Macbook Pro issue - advice needed

Hi!
I have mid 2010 15” i5 2.53 Macbook Pro that has quite famous Nvidia 330m problem, it works fine when it uses integrated graphics, however it randomly crashes after switching to Nvidia.
I am a graphic designer so I need to use adobe programs such as Dreamweaver, Illustrator, Photoshop, InDesign, After Effects etc, also I need reliable machine, it’s really annoying when I sometimes lose something I’ve been working for hours after computer crashes (I tend to save everything after each modification but sometimes I won’t be able to when it crashes randomly).
It worked alright before while using Snow Leopard, issue started after upgrading to Mountain Lion, then, even after downgrading to Snow Leopard, problem stayed. I tried to get apple to fix it free of charge under their policy for this problem last year however they said that macbook showed signs of liquid damage so they wouldn’t, they quoted me for about £670 for total repair - I didn’t agree on this.
I’ve been looking for some ways to fix it, I upgraded to Mavericks recently and after that macbook was crashing pretty much all the time after few seconds after start up when I was trying to do something on it, when I was using Snow Leopard it tend to crash only 1-4 times a day.
I’ve found the idea with the blanket forcing it to heat, I have removed battery, plugged AC adapter, positioned turned on mac upside down on the edge of my bed (open lid) covered it with blankets and left it for an hour. To my surprise, after it cooled down it was working much better even tho I was using mavericks, it didn’t crash at all for about 2 hours, then crashed once, then it kept going for even 6 hours without crashing which was really good considering previous situations. The problem is, it still crushes sometimes, and I can’t risk losing my work.
There are still some ways I haven’t try yet like:
Putting logic board into the oven for 7 mins
Trying to heat logic board (Nvidia chipset) with hair dryer
Also, there is a repair centre on ebay that fixes this exact issue, apparently permanently by fitting brand new updated GPU Chipset that has been purposely produced by Nvidia to replace the Faulty GPU Chipset - this will cost about £180 including return delivery, and they provide 6 months warranty - there was over 100 happy customers with this problem and it seems like they fixed it
I would prefer to spend as little money as possible, and I have no problem with the speed of my macbook pro, 4gb Ram (currently using 2GB as one stick got broken so it does work slowish, but I will buy another 2gb stick on Monday - or should I get 4gb making overall ram 6gb? will this make much difference?) also, I was thinking about updating HDD to either Crucial 256GB SSD or Seagate Momentus XT 500 and then use my currently installed HDD as external HDD as I have planned to buy external HDD anyway.
Of course, getting the machine professionally fixed and upgrading it would cost me less than spending loads of money (over £1000) for brand new 13” retina mac, I also like 15” screen, even tho 13” retina has higher resolution, build in DVD is beneficial as well.
What do you guys think? Any experience with similar problem? If so what was your solution? BTW, what was the highest amount of money you've ever spent to fix your macbook pro that was out of warranty?
Sorry for quite long post
Thanks!

Yes, they specifically fix Nvidia 330m problem, they state that the only true solution is to remove old chipset with their brand new chipset that has been apparently released by Nvidia as an update for this issue, this is exactly what they say:
What faults can we fix?
We can fix graphic/display issues relating to the 15" / 17" Nvidia 330M models in 2010 Models. These are fixed using the appropriate professional equipment.
Brand New Chipset Repair - (only option we recommend for Macbook Pro Nvidia Models) With this procedure we re-fit a Brand New Nvidia GPU Chipset reballed in leaded solder.
**** Special Offer - £10 off making the Brand New Chipset Repair £169 + Post! ****
They also provide photos of certain logic board (including photo of serial number) with old chip, chip removed and new chip installed as a proff.
Thanks!

Database migrated from Oracle 10g to 11g Discoverer report performance issu

Hi All,
We are now getting issue in Discoverer Report performance as the report is keep on running when database got upgrade from 10g to 11g.
In database 10g the report is working fine but the same report is not working fine in 11g.
The query i have changed as I have passed the date format TO_CHAR("DD-MON-YYYY" and removed the NVL & TRUNC function from the existing query.
The report is now working fine in Database 11g backhand but when I am using the same query in Discoverer it is not working and report is keep on running.
Please advise.
Regards,

Pl post exact OS, database and Discoverer versions. After the upgrade, have statistics been updated ? Have you traced the Discoverer query to determine where the performance issue is ?
How To Find Oracle Discoverer Diagnostic and Tracing Guides [ID 290658.1]
How To Enable SQL Tracing For Discoverer Sessions [ID 133055.1]
Discoverer 11g: Performance degradation after Upgrade to Database 11g [ID 1514929.1]
HTH
Srini

Unable to Start Listner for 10g R2 after windows xp pro restart.

Database worked just fine until a system reboot after installing the Apache server and Apex 2.2 The service start and I'm able to connect to the database SQL*PLUS without specifying the host string
SQL*PLUS
User Name: xxxxx
Password : xxxxx
Host String: <Blank>
connect without any problem.
Once I include the orcl name I can't connect and get the following error message
TNS-12541: TNS: no listner
LSNRCTL> start
Starting tnslsnr: please wait...
Service OracleOraDb10g_home1TNSListener already running.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
LSNRCTL>
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\Db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
#Oracle Database 10g Enterprise Edition\
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
listner.ora as following
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\Db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
I have another home for the Apache Server.
Everything was just fine, Oracle, Apache, EM, and Apex.
I checked the path for windows it looks good, checked the registery looks good, two homes listed.
When I check the status for the LISTNER is win Service it show start
OracleOraDb10g_home1TNSListener
I have another listner OracleOraDb10g_home1TNSListenerLISTNER1 I don't know why it's there?
TNSPING ORCL WORKS
WITH THE SAME EORROR MESSAGE
PING WORK FOR THE HOST IP NO PROBLEM.
Please see the following to Analyze the Problem:
C:\oracle\product\10.2.0\db_1\BIN>lsnrctl status orcl
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:24
:50
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521))(C
ONNECT_DATA=(SERVICE_NAME=orcl)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
C:\oracle\product\10.2.0\db_1\BIN>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:25
:23
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
C:\oracle\product\10.2.0\db_1\BIN>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:25
:41
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
Service OracleOraDb10g_home1TNSListener already running.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
C:\oracle\product\10.2.0\db_1\BIN>path
PATH=C:\oracle\product\10.2.0\Db_1\bin;C:\oracle\product\10.2.0\Db_1\jre\1.4.2\b
in\client;C:\oracle\product\10.2.0\Db\jre\1.4.2\bin;;C:\oracle\product\10.2.0\db
\bin;C:\oracle\product\10.2.0\db\jlib;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\
System32\Wbem;"C:\Program Files\Zone Labs\ZoneAlarm\MailFrontier";C:\Program Fil
es\Common Files\Roxio Shared\DLLShared;D:\Program Files\Microsoft Visual Studio\
Common\Tools\WinNT;D:\Program Files\Microsoft Visual Studio\Common\MSDev98\Bin;D
:\Program Files\Microsoft Visual Studio\Common\Tools;D:\Program Files\Microsoft
Visual Studio\VC98\bin
C:\oracle\product\10.2.0\db_1\BIN>sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Mar 16 21:26:44 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: system
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> show user
USER is "SYSTEM"
SQL> select name from v$database;
NAME
ORCL
SQL>
IN THE PAST I WAS ABLE TO CONNECT TO ALL BUT NOW,
I'M UNABLE TO LOGIN TO APEX NEITHER EM DUE TO ORCL LISTNER.
Like I said before I have no problem connecting to SQL*PLS, BUT I can't Login to orcl APEX nor EM.
Any suggestion or solutions is really apreciated. I'm looking forward to hear from you ACES.......
Thank You Very Much,
Mhnd

Hi
Check this out.
TNS-12560: "protocol adapter error"
Cause: A generic protocol adapter error occurred.
Action: Check addresses used for proper protocol specification.
For further details, turn on tracing and reexecute the operation. Turn off tracing when the operation is complete.
TNS-00530: "protocol adapter error"
Cause: A generic protocol adapter error occurred.
Action: For further details, turn on tracing and reexecute the operation.
Proposed Solution on metalink.
Solution Description:
=====================
Delete the protocols in your "listener.ora" file that you do not use.
Edit the "listener.ora" file and look at the protocol section. Make sure that
only the protocols that you use on your system are there (i.e., TCP, IPC, ...)
and that there are no entries listed for SPX or NMP (named pipes).
Regards
Adnan
Since you are only using TCP I don't think that is the issue. You should turn on tracing to get more details.
Message was edited by: Adnan
amashhadi

Unable to Start Listner for 10g R2 after windows xp pro restart. Please!

Database worked just fine until a system reboot after installing the Apache server and Apex 2.2 The service start and I'm able to connect to the database SQL*PLUS without specifying the host string
SQL*PLUS
User Name: xxxxx
Password : xxxxx
Host String: <Blank>
connect without any problem.
Once I include the orcl name I can't connect and get the following error message
TNS-12541: TNS: no listner
LSNRCTL> start
Starting tnslsnr: please wait...
Service OracleOraDb10g_home1TNSListener already running.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
LSNRCTL>
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\Db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
#Oracle Database 10g Enterprise Edition\
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
listner.ora as following
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\Db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
I have another home for the Apache Server.
Everything was just fine, Oracle, Apache, EM, and Apex.
I checked the path for windows it looks good, checked the registery looks good, two homes listed.
When I check the status for the LISTNER is win Service it show start
OracleOraDb10g_home1TNSListener
I have another listner OracleOraDb10g_home1TNSListenerLISTNER1 I don't know why it's there?
TNSPING ORCL WORKS
WITH THE SAME EORROR MESSAGE
PING WORK FOR THE HOST IP NO PROBLEM.
Please see the following to Analyze the Problem:
C:\oracle\product\10.2.0\db_1\BIN>lsnrctl status orcl
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:24
:50
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521))(C
ONNECT_DATA=(SERVICE_NAME=orcl)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
C:\oracle\product\10.2.0\db_1\BIN>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:25
:23
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
C:\oracle\product\10.2.0\db_1\BIN>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:25
:41
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
Service OracleOraDb10g_home1TNSListener already running.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
C:\oracle\product\10.2.0\db_1\BIN>path
PATH=C:\oracle\product\10.2.0\Db_1\bin;C:\oracle\product\10.2.0\Db_1\jre\1.4.2\b
in\client;C:\oracle\product\10.2.0\Db\jre\1.4.2\bin;;C:\oracle\product\10.2.0\db
\bin;C:\oracle\product\10.2.0\db\jlib;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\
System32\Wbem;"C:\Program Files\Zone Labs\ZoneAlarm\MailFrontier";C:\Program Fil
es\Common Files\Roxio Shared\DLLShared;D:\Program Files\Microsoft Visual Studio\
Common\Tools\WinNT;D:\Program Files\Microsoft Visual Studio\Common\MSDev98\Bin;D
:\Program Files\Microsoft Visual Studio\Common\Tools;D:\Program Files\Microsoft
Visual Studio\VC98\bin
C:\oracle\product\10.2.0\db_1\BIN>sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Mar 16 21:26:44 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: system
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> show user
USER is "SYSTEM"
SQL> select name from v$database;
NAME
ORCL
SQL>
IN THE PAST I WAS ABLE TO CONNECT TO ALL BUT NOW,
I'M UNABLE TO LOGIN TO APEX NEITHER EM DUE TO ORCL LISTNER.
Like I said before I have no problem connecting to SQL*PLS, BUT I can't Login to orcl APEX nor EM.
Any suggestion or solutions is really apreciated. I'm looking forward to hear from you ACES.......
Thank You Very Much,
Mhnd

Hi
Check this out.
TNS-12560: "protocol adapter error"
Cause: A generic protocol adapter error occurred.
Action: Check addresses used for proper protocol specification.
For further details, turn on tracing and reexecute the operation. Turn off tracing when the operation is complete.
TNS-00530: "protocol adapter error"
Cause: A generic protocol adapter error occurred.
Action: For further details, turn on tracing and reexecute the operation.
Proposed Solution on metalink.
Solution Description:
=====================
Delete the protocols in your "listener.ora" file that you do not use.
Edit the "listener.ora" file and look at the protocol section. Make sure that
only the protocols that you use on your system are there (i.e., TCP, IPC, ...)
and that there are no entries listed for SPX or NMP (named pipes).
Regards
Adnan
Since you are only using TCP I don't think that is the issue. You should turn on tracing to get more details.
Message was edited by: Adnan
amashhadi

MacBook Pro issues...

I have a MacBook Pro (MacBookPro3,1 Intel Core 2 Duo 2.4 GHz) purchased in 2008. I have AppleCare that will expire in 2011.
The issues I am having, some since I purchased it:
- Display at times will get a purplish/ blueish hue, fixed when I go under System Preferences > Displays and click the resolution setting (which is not changed, but seems to be clicked) and then it works properly.
- The DVD/ CD drive seems to be acting up. A DVD that works on an older iBook G4 without issue spins like crazy in my MacBook Pro, making quite a bit of noise and then ends up with an error.
- The keyboard, that has never had anything spilled on it and is in a smoke free environment, has issues with keystrokes, whereby as I am typing I have to go back and press the key harder for it to stroke.
- Battery life is terrible. If I can get 90 minutes on the battery I am lucky.
- The Apple Mouse, well same issue as everyone else, that ball needs to be cleaned almost every day to partially work (purchased on the same bill with the computer.)
Guess my question is probably my answer and is to get to the Genius bar and have them take care of this, but I can't be without a computer and wondering how Apple handles these issues.
Thanks in advance for your help!

Sam,
You would need to take it in to really get an accurate assessment of how Apple will handle it. I would make an appointment at the Genius Bar and try to tackle each issue one by one. The issues they can look at would be the display, the SuperDrive and your keyboard. The others you can tackle before going in.
If they do take it in for repair you will need to be without the machine so you should have a backup computer plan going in.
As far as the battery life, batteries are consumables so yours may be nearing the end of it's life assuming you have properly cared for it. You should prepare to purchase a replacement if needed. If you haven't already I would recommend reading this article on battery maintenance.
Regarding your mouse, I would call Apple immediately and see if they will send you a replacement using your Applecare. When they send you a new one they will take a credit card number to ensure you send back the old mouse, once they received it they will release your the hold on your credit card.
That should handle it however you should make preparations to be without your computer for the display, SuperDrive and keyboard issues.
Regards,
Roger

10g on SuSE 9.1 Pro issue

Similar Messages

Maybe you are looking for