10g R2 dbca fails in Solaris 10

Hi,
I am facing the following problem in Solaris 10 SPARC 64 bit machine.
1.     Downloaded Oracle 10g R2 installable from oracle
2.     Created user oracle and group dba and modified project settings and permissions as per quick installation guide
3.     Installation of software is successful. But dbca fails with following error message.
ORA-19624: operation failed, retry possible
ORA-19870: error reading backup piece /vol1/ora10gr2/product/10.2.0/Db_1/assistants/dbca/templates/Seed_Database.dfb
ORA-19587: error occurred at reading 0 bytes at block number 1
ORA-27091: unable to queue I/O
ORA-27067: size of I/O buffer is invalid
4.     I also tried creating scripts using dbca and running it manually. It fails with following error message in trace file
Corrupt block 1 found during reading backup piece, file=/ora10gr2/ora10gr2/product/10.2.0/Db_1/assistants/dbca/templates/Seed_
Database.dfb, corr_type=3
5.     Creation of custom database also fails with similar error message
It is Solaris 10 (Solaris 10 11/06 s10s_u3wos_10 SPARC) machine with patch level 125100-05 . Please help.
Regards
Vijoy

In both cases, there it is shown a block corrupt for database file 1, that means the install media was originally corrupt and the corruption was at the seed database files.
Check the media consistency to discover if corruption was originally there. In case it was redownload the zip file for solaris and unzip it somewhere else. Look for the seed database files at the ORACLE_HOME/assistants/dbca/templates and replace them.
When you created by scripts, ensure the option where the scripts only is selected, do not try to create the database by means of the dbca, run scripts from the OS.
~ Madrid

Similar Messages

10g dbca fails with errors

Hi,i am new to this forum and facing the following problems while installing database 10g release 2 in windows 7
Downloaded Oracle 10g Release 2 from oracle then extract all files to folder,clicked on setup.exe
Installation of software is successful but dbca always fails with following error messages.
ORA=19624 operation failed,retry possible
ORA-19870 error reading backup piece
ORA-19587 error occur reading 0 bytes at block number 1
ORA-27091 unable to queue I/O
ORA-27067 size of I/O buffer is invalid
I have tried downloading the installation file several times,formatted my system and even installing oracle to different drives but the same error always appears,please help me..

Pl identify exact version of Oracle 10gR2 you are installing, along with exact version of Win 7. The only certified combinaton is 10.2.0.5 on Win 7 Professional or higher - Home versions are not supported. Is Win 7 32-bit or 64-bit ?
http://docs.oracle.com/cd/B19306_01/relnotes.102/b14264/toc.htm#CIHCFAGA
http://docs.oracle.com/cd/B19306_01/relnotes.102/b15680/toc.htm#BABEBBJF
10.2.0.5 is patch that is only available from Oracle's Support site (https://support.oracle.com), access to which requires a paid support contract.
If you do have Win 7 Professional or higher, you should be installing 11gR2 instead.
http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#i1011417
If you are using a template in dbca to create the database, where did you get the template from ?
Dbca Fails With ORA-19624 Creating A Database Using Template That Contains Data [ID 578830.1]
HTH
Srini

Installing oracle 10g release 2 on spark solaris!! urgent help!

hi guys!
Am installing oracle 10g r2 on spark sun solaris. I did install the software without any pb, but when installing the database using dbca, I have this errors.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 28
ORA-27301: OS failure message: No space left on device
ORA-27302: failure occurred at: sskgpcreates
Edited my kernel parameters and in the /etc/system file, ai've added
set noexec_user_stack=1
set semsys:seminfo_semmni=100
set semsys:seminfo_semmns=1024
set semsys:seminfo_semmsl=256
set semsys:seminfo_semvmx=32767
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=100
set shmsys:shminfo_shmseg=10
Space aint an issue and dont know how to over come this error!
Should ai just install the db using scripts and run the neccessary .sql scripts instead of going through dbca?
junior DBA in distress.

This appears to be because of low semaphores setting. Did you reboot your server after making the /etc/system parameter changes ?
-Ramesh

Oracle 10gR2 installation fails in Solaris 10

Hi All,
I am facing the following problem in Solaris 10 SPARC 64 bit machine.
1.     Downloaded Oracle 10g R2 installable from oracle
2.     Created user oracle and group dba and modified project settings and permissions as per quick installation guide
3.     Installation of software is successful. But dbca fails with following error message.
ORA-19624: operation failed, retry possible
ORA-19870: error reading backup piece /vol1/ora10gr2/product/10.2.0/Db_1/assistants/dbca/templates/Seed_Database.dfb
ORA-19587: error occurred at reading 0 bytes at block number 1
ORA-27091: unable to queue I/O
ORA-27067: size of I/O buffer is invalid
4.     I also tried creating scripts using dbca and running it manually. It fails with following error message in trace file
Corrupt block 1 found during reading backup piece, file=/ora10gr2/ora10gr2/product/10.2.0/Db_1/assistants/dbca/templates/Seed_
Database.dfb, corr_type=3
5.     Creation of custom database also fails with similar error message
It is Solaris 10 (Solaris 10 11/06 s10s_u3wos_10 SPARC) machine with patch level 125100-05 .
I know this question has to be posted in Oracle forums. But I could not see others facing this issue in oracle forums. If anybody has faced this issue please let me know.
Thanks!

Yes, I was trying to install Oracle for Solaris sparc 64 bit.
again I reformatted the system with Solaris 10 8/07 release but I am getting the same error. Machine model is v480. even i tried to create a database manually, CREATE DATABASE command fails with the same error
Please find trace file content below
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
control_files            = /u01/ora10gr2/c1.ctl, /u01/ora10gr2/c2.ctl, /u01/ora10gr2/c3.ctl
db_block_size            = 8192
undo_management          = AUTO
db_name                  = ORA10
PMON started with pid=2, OS id=1331
PSP0 started with pid=4, OS id=1333
MMAN started with pid=6, OS id=1335
DBW0 started with pid=8, OS id=1337
DBW1 started with pid=3, OS id=1339
LGWR started with pid=5, OS id=1341
CKPT started with pid=10, OS id=1343
SMON started with pid=12, OS id=1345
RECO started with pid=14, OS id=1347
MMON started with pid=16, OS id=1349
MMNL started with pid=18, OS id=1351
Tue Oct 9 16:45:17 2007
create database ORA10
logfile   group 1 ('/u01/ora10gr2/redo1.log') size 10M,
group 2 ('/u01/ora10gr2/redo2.log') size 10M,
group 3 ('/u01/ora10gr2/redo3.log') size 10M
character set          WE8ISO8859P1
national character set utf8
datafile '/u01/ora10gr2/system.dbf'
size 50M
autoextend on
next 10M maxsize unlimited
extent management local
sysaux datafile '/u01/ora10gr2/sysaux.dbf'
size 10M
autoextend on
next 10M
maxsize unlimited
undo tablespace undo
datafile '/u01/ora10gr2/undo.dbf'
size 10M
default temporary tablespace temp
tempfile '/u01/ora10gr2/temp.dbf'
size 10M
Tue Oct 9 16:45:18 2007
Hex dump of (file 0, block 9) in trace file /u01/ora10gr2/product/10.2.0/Db_2/rdbms/log/ora10_ora_1352.trc
Corrupt block relative dba: 0x00000009 (file 0, block 9)
Bad check value found during control file block write
Please suggest some other troubleshooting steps

Configuration assistant error with Oracle 10g 10.2.02 with Solaris 10 6/06

Hi all,
As anyone seen this a fix for this error?
I have installed Solaris 10 6/06 x86 on VMWare 5.2 which works fine.
When I attempt to install Oracle 10g 10.2.02 for Solaris x86 (released in Sept 06), the install goes fine until I get to the configuration assistant stage.
The first Net based configuration assistant fails with a Java exception which seems to be related to a Sig 11 in the libc library.
This looks like an error fixed by a patch mentioned in the release notes but the patch does not seem to be available for this version of Solaris.
Any comments would be greatly appreciated...
Regards
Anthony

Hi all,
Just to update this.
I have deselected the create database option part of the install and Oracle installs OK!
The problem is in the create database phase which I have manually done when I use the dbca program.
When I get to the create database operation of the the dbca wizard, I get a the following error "ORA-00600, internal error code, arguments [kelntf-ldminit, [146],[1],[],[],[],[],[]"
Any offers?

Oracle 10g R2 installation on sun solaris 10 Sparc machine

Hi there,
I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
Error encountered:
Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n]
The following were the steps taken before encountering the above error
1. logged into a workstation
2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
3. keyed in the following at the command prompt
DISPLAY=machine_name:0.0; export DISPLAY
4. executed the following from the command prompt
./runInstaller
Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
Please help me with this problem.
Thank you
Ravindran Kanniah

It is because of UNIX shell. I also faced this error during installation.
First check your shell by the following command.
$ echo $SHELL
Then select the below.
For csh shell
$ setenv DISPLAY 192.168.1.128:0.0
$ export DISPLAY
For sh,ksh and bash
$ DISPLAY=192.168.1.128:0.0
$ export DISPLAY
After you do this check the value of DISPLAY variable.
$ echo $DISPLAY
If the DISPLAY variable is set then run ./runInstaller.
One advice: Keep a complete log of your terminal session. This will help you in future :)
-aijaz

Dbca fails

Hello ,
i am doing database createion on 11gR2 on solaris 10 and i got this mesage while defining SID:
"The Oracle system identifier(SID) "test" already exists. Specifiy another SID.
Before that my dbca failed when got to 4%, i don't know why, and now i can't select the same SID.

What is Operation system?
dbca say that in the system there is ORACLE_SID which which you want create again.
if you uses windows OS then enter from commond promt as follow
set ORACLE_SID=<SIDNAME>
oradim -delete -sid <SIDNAME>
then try create database using dbca

Font command fails on solaris

I have a program which runs fine under Windows but fails in Solaris when it gets to the line
font=new Font(null,FONT.plain,current_font_size);
(I have tried SansSerif and Lucida in place of null.
It is being run from a shell script as a batch process on the server. I have to access fonts to work out size of text objects - I presume my problem is to do with X11 - any advice.

Hi,
Can you provide the error you get?
I guess you do need an X Window System ( http://www.xfree86.org ).
If you already have one, try setting the environment variable DISPLAY as follows:
- log on as root
- for sh ksh:
set DISPLAY=localhost:1.0
export DISPLAY
- or for csh:
setenv DISPLAY=localhost:1.0
If this doesn't work, try replacing 1.0 with 0.0
Regards,
Kurt.

Ddi_regs_map_setup fails in solaris 11

Hi
I have a driver (parent=isa) in x86 that ioremaps (ddi_regs_map_setup) a physical address range between 0xE0000 and 0xF0000.
This is a device memory mapped region.
The ddi_regs_map_setup was successful in solaris 10 (32 bit and 64 bit) but fails in solaris 11.
The warning message
WARNING: isa_apply_range: Out of range base <base> size <size>
The ddi_regs_map_setup goes through for the same region if driver made as parent=pci instead of parent=isa.
Would be helpful if someone could point out why this happens in solaris 11?
cheers

each of the registers covers an area of pci bus address space supplied by the card
why don't you print out the return value from ddi_dev_regsize() as that will tell you
how much space the card is exporting for each of the registers .
tim

Download Oracle 10g Character set scanner for Solaris

http://www.oracle.com/technology/software/tech/globalization/index.html
the above link contains only the oracle 9i Character set scanner but I need the Oracle 10g Character set scanner for Solaris
please assist me.

Pl see MOS Doc 745809.1 (Installing and configuring Csscan in 10g and 11g (Database Character Set Scanner)
HTH
Srini

9.0.1.1.1 DBCA fails with ORA-01017

I've just downloaded Oracle9i 9.0.1.1.1 from OTN and have attempted to install it on my Win XP Pro machine.
Everything seems to progress fine until the DBCA starts up, at which time I eventually get an error: "ORA-01017: invalid username/password; login denied" and the DBCA fails.
Has anybody seen this before; know of any causes or workarounds?

On repository server , can you login as sys user ?
Try to connect through listener and share the result.
sqlplus sys/<password>@<connectstring> as sysdba
Thanks
Rajesh

Oracle Forms and Report 10g r2 standalone installation fail on Solaris 8

I tried to install Oracle Forms & Report 10g r2 standalone on solaris 8.
However the installation failed with the following error:
/usr/ccs/bin/make -f ins_net_client.mk client_sharedlib ORACLE_HOME=/data1/oraapps/oracle/fr10g//data1/oraapps/oracle/fr10g/bin/genclntsh
ld: fatal: library -lnsl: not found
ld: fatal: library -lsocket: not found
ld: fatal: library -lgen: not found
ld: fatal: library -ldl: not found
ld: fatal: library -lkstat: not found
ld: fatal: library -laio: not found
ld: fatal: library -lposix4: not found
ld: fatal: library -lm: not found
ld: fatal: library -lc: not found
Have anyone encounter the same error. Passed the prerequisite check but still fail during linking.
I managed to install 9.0.4 successfully on the same server without any problem.
Zairi

Do you ahve the Shared_library variable? LD_LIBRARY_PATH, SHARED_LIBRARY_PATH ?? Usually one of this have to point to where the librarias are.
Regards.

Ias 10g (9.0.4) on Solaris 9 (SPARC) . Configuration Assistant Error

Hi
I'm traying to install Oracle Application Server 10g (9.0.4) on Soalris 9 (SPARC)
when installer starts all requeriments are fulfilled
and show this message:
Using paramFile: /export/home/ias10g_install/Disk1/install/solaris/oraparam.ini
Checking requirements...
Checking operating system version: must be 5.8 or 5.9.
Actual 5.9 Passed
Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWsprox,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
Checking swap space: must be greater than 1536 MB.
Actual 5621MB Passed
Checking Temp space: must be greater than 150 MB.
Actual 5595 MB Passed
All requirements met.
Checking operating system patches: 113096-03,112785-26 Passed
Checking for patch 113096-03; found 113096_03
Checking for patch 112785-26; found 112785_49
Checking if CPU speed is above 250 MHz.
Actual 1002 MHz Passed
Checking monitor: must be configured to display at least 256 colors.
Actual 16777216 Passed
Variables de entorno:
     ORACLE_HOME =
     PATH = /usr/bin:/usr/ccs/bin:/usr/bin::/usr:/usr/dt/bin:/usr/openwin/bin:/usr/ucb:/bin:/usr/openwin/platform/sun4u/lib/sparcv9/GL:/opt/j2re1.4.2_06/bin/:/opt/csw/bin
     CLASSPATH =
but when system shows the 'Configuration Assistant' console the 'Java configuration Assistant fails'
the message that returns is:
ADMN-202026
DCM ha encontrado un problema con el subsistema de la API de Repositorio de OracleAS.
Excepción Base::
oracle.ias.repository.schema.SchemaException:iAS Property could not be found Property Name Caché de Web.LaunchSuccess in /export/home/ias10g/OraHome1/config/ias.properties
Consulte la excepción devuelta por la API de Repositorio para obtener una resolución. La API de Repositorio puede estar configurada de forma incorrecta.
oracle.ias.repository.schema.SchemaException: iAS Property could not be found Property Name Caché de Web.LaunchSuccess in /export/home/ias10g/OraHome1/config/ias.properties
     at oracle.ias.repository.local.IASPropertyCache.readValue(IASPropertyCache.java:62)
     at oracle.ias.repository.IASSchema.getAllComponents(IASSchema.java:2311)
     at oracle.ias.repository.SchemaManager.getAllComponents(SchemaManager.java:1554)
     at oracle.ias.sysmgmt.persistence.SeedDbAccess.getConfiguredComponentTypes(Unknown Source)
     at oracle.ias.sysmgmt.clustermanagement.ComponentTypeFactory.init(Unknown Source)
     at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
     at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
     at oracle.ias.sysmgmt.cmdline.DcmCmdLine.initRepository(Unknown Source)
     at oracle.ias.sysmgmt.cmdline.DcmCmdLine.execute(Unknown Source)
     at oracle.ias.sysmgmt.cmdline.DcmCmdLine.main(Unknown Source)
best regards

Fixed my issue.
My first issue was with the repository. Our database repository is set to nls_length_semantics='CHAR' and when you run the repository wizard, you have to set it to 'BYTE'
Metalink Documentation note 373997.1
Applies to: Oracle Lite - Version: 10.2.0.1.0
This problem can occur on any platform.
Symptoms
The problem is that when using the MOBILE SERVER 10.2.0.1.0
by doing the following :
- Install Mobile server 10.2.0.1.0
- start the Mobile Server
MGP fails with the following error :
ORA-942
- This happens with those versions :
mobile Server 10.2.0.1.0
- Therefore, the problem to solve is to be able to avoid this MGP error
Cause
nls_length_semantics is set to CHAR.
Oracle lite database supports ONLY BYTE semantics
Solution
To implement the solution, please execute the following steps:
1. Stop Mobile Server
2. Drop user mobileadmin cascade;
3. alter system set nls_length_semantics='BYTE'
4. recreate the repository using repwizard
5. start Mobile Server
6. You should not get any issue...
Errors
ORA-942 "table or view does not exist"
ORA-904 %s: invalid identifier / invalid column name

DBCA (10gR2) in solaris 10 doesn't create DB, has 0 errors

Hi,
I have oracle 10.2.0.1 installed on a Solaris 10 SPARC box, and am trying to create a database. When I installed Oracle, I originally opted to create a new database, but when it got to the DBCA section, the installer seems to pause with the results stating it's "in progress...". I stopped the installer, and cancelled the install. On checking the logs, there were no errors, it just seems to stop (even if I leave it for 14+ hours) with the last lines of the log being:
INFO: Configuration assistant "Oracle Net Configuration Assistant" succeeded
INFO: Command = /export/home/oracle/product/10.2.0/Db_3/bin/dbca -progress_only
-createDatabase -templateName General_Purpose.dbc -gdbName orcl -sid orcl -sy
sPassword 052b3cccab83184dd1ba5e728aa1ff1e189a90088c2da70291 -systemPassword 05
3e5dc6ab23642c16821c915b858ddc23d87c4a357e140d8e -sysmanPassword 05b123a3abe329
68b37230926a9bfc13f4d4ef5e52f01e095d -dbsnmpPassword 058be1aeaba392a9299e7d3d82
15720402fe045d76a03d4506 -emConfiguration LOCAL -datafileJarLocation /expor
t/home/oracle/product/10.2.0/Db_3/assistants/dbca/templates -datafileDestinatio
n /export/home/oracle/product/10.2.0/oradata/ -responseFile NO_VALUE -characte
rset WE8ISO8859P1 -obfuscatedPasswords true -sampleSchema true -oratabLocatio
n /export/home/oracle/product/10.2.0/Db_3/install/oratab -recoveryAreaDestinati
on NO_VALUE
Then I installed Oracle without creating a db thinking I could create a database alone with DBCA. The installer completed successfully, but dbca isn't completing at all. It launches fine, I can progress through all the steps/panes no problems. When I get to the last pane to select db creation options, I have "Create Database" and "Generate Database Creation Scripts" checked, then I click Finish. A window opens with a summary, I click OK and that window closes. Then nothing happens. Nothing at all. No errors in the terminals, and I'm looking at the last pane of the DBCA as if it didn't do anything at all. I can uncheck the creation options and click Finish again, but I get no notification windows, and the app just seems to be open, but not doing anything. I can "Cancel" out of it though. No scripts directory is added either.
Any suggestions on how I can create a db??
Thanks!

Hello there,
I know this topic is quite old now but maybe my solution would help someone else...
I met the exact same problem than user10494040. I'm running Debian Etch (but the problem was the same with a Lenny) which was installed from a netinstall CD, and on which I've met all the prerequisites given by Oracle ( [Configuring Linux for the Installation of Oracle Database 10g|http://www.oracle.com/technology/obe/obe10gdb/install/linuxpreinst/linuxpreinst.htm] )
It was impossible for me to successfully complete the Oracle installation when the database creation option was selected in OUI, as well as the Basic Installation or the Advanced one was choosen.
I've done many tests and each time I unselected the database creation option, the installation completed successfully. So I decided to try to create my database using DBCA in command line, using the command automatically generated by OUI and on which the installation froze, just adding to it the -silent option and removing the -progress_only one.
Note :_ if your installation really freeze on the database creation command, you can also find the DBCA command automaticaly generated in the log file of the installation (available in the folder oraInventory/logs/installActions####.log where #### is the date you attempted to make your installation).
For example, with the command given by user10494040 it would looks like :
# dbca -silent -createDatabase -templateName General_Purpose.dbc -gdbName orcl -sid orcl -sysPassword 052b3cccab83184dd1ba5e728aa1ff1e189a90088c2da70291 -systemPassword 053e5dc6ab23642c16821c915b858ddc23d87c4a357e140d8e -sysmanPassword 05b123a3abe32968b37230926a9bfc13f4d4ef5e52f01e095d -dbsnmpPassword 058be1aeaba392a9299e7d3d8215720402fe045d76a03d4506 -emConfiguration LOCAL -datafileJarLocation /export/home/oracle/product/10.2.0/Db_3/assistants/dbca/templates -datafileDestination /export/home/oracle/product/10.2.0/oradata/ -responseFile NO_VALUE -characterset WE8ISO8859P1 -obfuscatedPasswords true -sampleSchema true -oratabLocation /export/home/oracle/product/10.2.0/Db_3/install/oratab -recoveryAreaDestination NO_VALUE
Of course, launch this command loggued as oracle, and make sure your $ORACLE_HOME is well set.
This trick worked for me, I hope that would help someone else :-)

Dbca failed in installation of OAS Infrastructure 10.1.2

Dear All,
During OAS Infrastructure 10.1.2 (Identity Mgmt + Metadata Repository) instalallation with Media Pack 12 (Solaris 10), I encountered error in Configuration Assistants, with error as follows:
Output generated from configuration assistant "Oracle Database Configuration Assistant":
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/bali/ewt/help/HelpProvider
     at java.lang.ClassLoader.defineClass0(Native Method)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
     at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
     at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
     at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
     at oracle.sysman.assistants.dbca.ui.UIHost.initializeHelp(UIHost.java:263)
     at oracle.sysman.assistants.dbca.ui.ProgressOnlyHost.initialize(ProgressOnlyHost.java:208)
     at oracle.sysman.assistants.dbca.Dbca.execute(Dbca.java:138)
     at oracle.sysman.assistants.dbca.Dbca.main(Dbca.java:202)
Configuration assistant "Oracle Database Configuration Assistant" failed
Does anyone encounter this error?
I have followed release notes doc in OAS 10.1.2 in db configuration assistant patch to manually install patch 4590858; however it still does not work after several attempts.
Fyi, I found no "bali" extracted during installation.
Need advice on this matter.
Thanks,
Anita

Anita,
You may wish to check metalink article ID 401987.1
I ran into this when I was installing Oracle Application Server SOA Suite. Jaime Acevedo of Oracle Global Services referred me to this article.
Briefly, it says that ANT_HOME environment variable must be unset and you must either remove the /etc/ant.conf file or comment out the line in the /etc/ant.conf file that incorrectly sets the ANT_HOME environmental variable.
HTH,
Gregory

10g R2 dbca fails in Solaris 10

Similar Messages

Maybe you are looking for