10g R2 on Linux x86

Can someone tell me if the current DB 10g R2 on Linux x86 download
has a <emctl dbconsole error> when installing it ?
The copy of 10g DB R2 that I have has this error and it is from JAN 2008.
Could I down load another copy from the web site with out this error ?
~ Thanks

This is the error and I want to do a new 10g install and would like to know if
the oracle web Oracle 10g R2 database for Linux x86 still has this error and is
this download still not going to install ?
Timezone mismatch: The agentTZRegion value (US/Eastern) in
/oracle/product/10g/10.2.0/db_1/oracleb.ridge.aps.org_oratest/sysman/config/emd.
properties
does not match the current environment TZ setting(US/Eastern).
The dbconsole cannot run with this mismatch.
If US/Eastern is the correct timezone, set your timezone environment variable to US/Eastern and repeat the
'emctl start dbconsole' operation.
If US/Eastern is not the correct timezone, make sure that the timezone in your environment is correct, and then run the
following command in your local Oracle Home: 'emctl resetTZ agent'
~ Thanks

Similar Messages

Can I run 32 bit version of Oracle 10g grid on Linux x86-64?

Since Oracle did not release 64 bit version of Oracle 10g grid for Linux X86-64. Can I run 32 bit version of Oracle 10g grid on Linux x86-64? If so did anyone tried this? and also any known issues?

All I had to do was use the 32bit version of "/usr/bin/gcc" and "/usr/bin/g++" to run the installation
That is:
bin]# cp -p /usr/bin/gcc /usr/bin/gcc_old
bin]# mv /usr/bin/gcc /usr/bin/gcc323
mv: overwrite `/usr/bin/gcc323'? y
bin]# ln -s /usr/bin/gcc296 /usr/bin/gcc
bin]# cp -p /usr/bin/g++ /usr/bin/g++_old
bin]# mv /usr/bin/g++ /usr/bin/g++323
mv: overwrite `/usr/bin/g++323'? y
bin]# ln -s /usr/bin/g++296 /usr/bin/g++
AFTER INSTALLATION REMEMBER TO
move back the 64bit files to their former state.
bin]#rm /usr/bin/g++
bin]#rm /usr/bin/gcc
bin]#mv /usr/bin/gcc_old /usr/bin/gcc
bin]#mv /usr/bin/g++_old /usr/bin/g++

OCS 10G running on Linux x86 32 bit vs. Linux x86 64 bit OS

We have Red Hat Linux R3 64 bits OS running on a x86 machine, we plan to install OCS 10G R1 on that machine. The OCS R1 media set I curently have is for Linux x86 32 bit, is it possible for 32 bits OCS running on 64 bit OS? Do we need to re install Linux 32 bit OS on that machine? Any suggestion will be highly appreciated.
Regards,
Jinsen

Thanks for the response....
Does this mean Peoplesoft cannot be installed and function in 32bit environment.
I ask this because i currently do not have access to a 64bit environment and I'm trying
to get a (local) PS application installed so that learn more about Peopletools and development.
If I definitely need to upgrade/invest in a new machine, I will, I'm just trying to avoid if possible.
thanks again

Where download Oracle 10g R1 For linux RH4 64

I want to install Oracle database 10g R1 on Linux RH4 x86 64.
But i cant find product.
Where can i download Oracle 10g Release1 for Linux x86 64 Bits???
Thank's

>
I want to install Oracle database 10g R1 on Linux RH4 x86 64.
But i cant find product.
Where can i download Oracle 10g Release1 for Linux x86 64 Bits???
>
The only version supported and available at the moment is 10gR2.
Please see {thread:id=1043805} for more details. Any particular details why you specifically want to download 10gR1?
Regards,
Phiri

Oracle 10g R 10.2 for Linux x86-64 - /proc/sys/vm/disable_cap_mlock problem

Hi All,
During installation - Oracle Database Configuration Assistance, I have got below error and thus I stuck. As per Metalink note 293988.1, this will be resolved if I do [root@localhos]# echo 1 > /proc/sys/vm/disable_cap_mlock . But problem is when I do this because I dont have /proc/sys/vm/disable_cap_mlock file in my system, it giving ¨bash: /proc/sys/vm/disable_cap_mlock: No such file or directory¨ error. So I am unable to get rid of this error. I also set SELinux Default and Current mode as permissible and rebooted it.
No use, Its giving same error.
ORA-27125: Unable to create shared memory segment.
DB Details_
Oracle 10g Release 2 (10.2) for Linux x86-64
Choosen Basic Installation
OS Details:_
*[root@localhost vm]# uname -rm*
2.6.32-100.0.19.el5 x86_64
*[root@localhost vm]# uname -a*
Linux localhost.localdomain 2.6.32-100.0.19.el5 #1 SMP Fri Sep 17 17:51:41 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
*[root@localhost etc]# cat /etc/redhat-release*
Red Hat Enterprise Linux Server release 5.5 (Tikanga)
*[root@localhost etc]# make -v*
GNU Make 3.81
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
This program built for x86_64-redhat-linux-gnu
This is bugging me since last two days. Any help would be appreciated.
Thanks in advance.
Regards,
Mahi

From what I can gather form your post, the ORA-27125: Unable to create shared memory segment is probably the result of:
a) not enough physical memory available.
b) /dev/shm not configured properly.
c) kernel parameters are not set according to Oracle requirements.
Since this is happening during the installation of Oracle I suggest to check the SHMMAX kernel parameter. This is all mentioned in the pre-installation steps. Oracle 11g will actually check these kernel parameters prior to installing. Not sure about 10g now, which you are trying to install.
The most common, easiest way to prepare the system for Oracle RDBMS is to install the "oracle-validated" package. If you don't have access to ULN, you can setup public yum.
http://public-yum.oracle.com/ Then you can simply type as the root user: yum install oracle-validated
Edited by: waldorfm on Nov 3, 2010 1:18 PM

Oracle 10g Release 2 (10.2) for Linux x86-64

Hi All,
During installation - Oracle Database Configuration Assistance, I have got below error and thus I stuck. As per Metalink note 293988.1, this will be resolved if I do [root@localhos]# echo 1 > /proc/sys/vm/disable_cap_mlock . But problem is when I do this because I dont have /proc/sys/vm/disable_cap_mlock file in my system, it giving ¨bash: /proc/sys/vm/disable_cap_mlock: No such file or directory¨ error. So I am unable to get rid of this error. I also set SELinux Default and Current mode as permissible and rebooted it.
No use, Its giving same error.
ORA-27125: Unable to create shared memory segment.
DB Details_
Oracle 10g Release 2 (10.2) for Linux x86-64
Choosen Basic Installation
OS Details:_
*[root@localhost vm]# uname -rm*
2.6.32-100.0.19.el5 x86_64
*[root@localhost vm]# uname -a*
Linux localhost.localdomain 2.6.32-100.0.19.el5 #1 SMP Fri Sep 17 17:51:41 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
*[root@localhost etc]# cat /etc/redhat-release*
Red Hat Enterprise Linux Server release 5.5 (Tikanga)
*[root@localhost etc]# make -v*
GNU Make 3.81
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
This program built for x86_64-redhat-linux-gnu
This is bugging me since last two days. Any help would be appreciated.
Thanks in advance.
Regards,
Mahi

Trust me I verified installtion guide and release notes atleast 20 times. I never had luck witht any thing. I was wondering how come edelivery.oracle.com packages (both Linux 64 bit Linux with upgrade to Unbreakable and Oracle 10g db version) is not workign for me. Finally below trick to the installed file could make my installation work(Ref link http://www.oracle-base.com/articles/10g/OracleDB10gInstallationOnFedora2.php) . In this I am setting DISABLE_HUGETLBFS to value 1. My only doubt is, does this have any impact on performance? Can some one relay on such tweeking for prod installtions? Ofcourse I am yet to go for commercial. At present I dont have ULN or metalink authorised access.
cd $ORACLE_HOME/bin
mv oracle oracle.bin
cat >oracle <<"EOF"
#!/bin/bash
export DISABLE_HUGETLBFS=1
exec $ORACLE_HOME/bin/oracle.bin $@
EOF
chmod +x oracle
Edited by: TechMahi.com on Nov 7, 2010 10:15 PM

10g Release 2 (10.2.0.4) Patch Set 3 for Linux x86 is available

For all those who were in need of some bug fixing, maybe it has been patched in 10g Release 2 (10.2.0.4) Patch Set 3 for Linux x86, which is now available for download.

Hello Srini, thanks for your answer.
I haven´t Oracle Dataguard, I have a disk replication with other supplier, for this reason, I need to know the files that will be modified, because if the patch modifies a file that I haven´t on replication, I will have problems.
Thanks again.

Oracle 10g (10.1.0.2) for Linux x86 missing from download page?

Hello,
Why isn't there a download link to Oracle 10g (10.1.0.2) for Linux x86 on the 10g download page?
And what's the difference between 10.1.0.3 and 10.1.0.2?
Thanks

Hi, 
 The level of one release is different with plateform.
On the Oracle Database 10g Downloads you can find only final release, and not intermediare patch. For example, the 10gR1 for Linux x86 is 10.1.0.3, and for Windows 32-bits this is 10.1.0.2, after what you can upgrade to the last patchset.

 Nicolas.

Installation Guide needed for Oracle RAC 10G R2 Linux x86-64

Hello All,
Can someone point me to the Oracle documentation on installing Oracle RAC 10G R2 (10.2.1.0) for Linux x86-64?
Seem unable to find the required doc.
I greatly appreciate your help!
Thanks!

Additional to documentation which you can access and search from http://tahiti.oracle.com there are several good step by step installation articles which summaries documentation.
http://www.oracle.com/technology/pub/articles/tech_dba.html#linux
And you can find more similar articles at
http://www.puschitz.com/
http://www.oracle-base.com/articles/linux/ArticlesLinux.php

CPU Requirements for Oracle 10G Rel2 on RH Linux 3 (Linux x86)

Hi,
Can anyone tell me how to decide on the CPU (Speend and no. of CPUs) for Oracle 10G Rel2 on RH Linux 3 (Linux x86)?
Thanks in Advance.
Prachi

the more , the better

Installing Oracle RAC 10g Release 2 on Linux x86

Dears,,
Please , it is the first time for me to install Oracle RAC 10g Release 2 on Linux x86
It is mandatory to have two machines to install RAC and test it?
Or can i test it on one machine?
Please , provide to me installation guides for this practice and your advises
Thanks & Best regards,,

The one of the best howto for 10gR2 RAC
http://idevelopment.info/data/Oracle/DBA_tips/Oracle10gRAC/CLUSTER_14.shtml
Also read the 2 day RAC on the official doc that will give you a head start..
- Karl Arao
karlarao.wordpress.com
karlarao.tiddlyspot.com

10g Linux x86-64 released but...

Hi,
I tried downloading
Oracle Cluster Ready Services Release 1 (10.1.0.3) for Linux x86-64,
but the link gives a 404 error.
Have any of you been able to download it?
-jd

hiAgain,
crs now downloads okay.
It must have been an intermittent problem.
-jd

How download 10g Release 10.0.0.2 for Linux x86

This is a misison of experience, my boss has asked me that try to startup a database on a Cold Backup, it's in Itanium's server to 64 bits and with the release 10.1.0.2, but in the official homepage of oracle do not I find it, not this release for Linux x86 appears.
Someone would be able me to help with this?
Greetings
Daniel

it's a copy and paste from sqlplus....
SQL*Plus: Release 10.1.0.2.0 - Production on Tue Sep 13 07:53:33 2005
Copyright (c) 1982, 2004, Oracle. All rights reserved.
SQL>
SQL> column comp_name format a40
column version format a15
column schema format a15
column status format a7
Select comp_name, version, schema, status from dba_registry;SQL> SQL> SQL> SQL> SQL>
COMP_NAME VERSION SCHEMA STATUS
Oracle Database Catalog Views 10.1.0.2.0 SYS VALID
Oracle Database Packages and Types 10.1.0.2.0 SYS VALID
Oracle Workspace Manager 10.1.0.2.0 WMSYS VALID
JServer JAVA Virtual Machine 10.1.0.2.0 SYS VALID
Oracle XDK 10.1.0.2.0 SYS VALID
Oracle Database Java Packages 10.1.0.2.0 SYS VALID
Oracle Expression Filter 10.1.0.2.0 EXFSYS VALID
Oracle interMedia 10.1.0.2.0 ORDSYS VALID
Oracle Data Mining 10.1.0.2.0 DMSYS VALID
Oracle Text 10.1.0.2.0 CTXSYS VALID
Oracle Enterprise Manager 10.1.0.2.0 SYSMAN VALID
COMP_NAME VERSION SCHEMA STATUS
Oracle Real Application Clusters 10.1.0.2.0 SYS INVALID
12 rows selected.
SQL>
SQL> select * from v$instance;
INSTANCE_NUMBER INSTANCE_NAME
HOST_NAME VERSION
STARTUP_ STATUS PAR THREAD# ARCHIVE LOG_SWITCH_ LOGINS SHU
DATABASE_STATUS INSTANCE_ROLE ACTIVE_ST
1 siladver
itanium 10.1.0.2.0
29/08/05 OPEN NO 1 STOPPED ALLOWED NO
ACTIVE PRIMARY_INSTANCE NORMAL
SQL> select CREATED, VERSION_TIME, DATABASE_ROLE, PLATFORM_NAME from v$database;
CREATED VERSION_ DATABASE_ROLE
PLATFORM_NAME
11/02/05 11/02/05 PRIMARY
Linux IA (64-bit)
SQL>
do you belive me now ?????

Oracle E-Business Suite Certification on Linux x86-64

Hello all,
I have some questions about certification for Oracle E-Business Suite 11.5.10.2 on Linux x86-64.
I have two 64-bit servers and intend to do a split configuration.
From the certification (Certify/View Certifications by Product/E-Business Suite/E-Business Suite 11i and Earlier/Platform Selection: Database Tier Only) I understand the following:
I must have the Application Tier running on Linux-x86 and the Database Tier may be either on Linux-x86 or Linux-x86-64.
Is this correct?
Should I install RHES4 for 32bit on the Application Server and RHES4 for 64bit on de Database Server?
or
Should I install RHES4 for 64bit on both servers and install the 32bit Applications software on the Application Server?
How should I ask for the software I need? From the E-Delivery web site I don't have the 64bit option for Oracle E-Business Suite Release 11.5.10.2.
Is EBS allways for 32bit no matter the OS ?
Thank you very much.
Catalina.

I must have the Application Tier running on Linux-x86
and the Database Tier may be either on Linux-x86 or
Linux-x86-64.
Is this correct? Yes
Should I install RHES4 for 32bit on the Application
Server and RHES4 for 64bit on de Database Server?
or
Should I install RHES4 for 64bit on both servers and
install the 32bit Applications software on the
Application Server?
Re: Oracle Application 11.5.10.2 installation on Linux AMD 64
How should I ask for the software I need? From the
E-Delivery web site I don't have the 64bit option for
Oracle E-Business Suite Release 11.5.10.2.
Is EBS allways for 32bit no matter the OS ?It is always 32-bit but it could comes in 64-bit for the database part. You would find such a media for Solaris for example "Oracle® Applications 11i Release 10.2 for Solaris Operating System (SPARC 32-bit) with Solaris Operating System (SPARC 64-bit) Oracle® Database" but not for Linux Intel 64-bit.
Just get the media for Linux x86, install it, then consider having Oracle 10g 64-bit on the database tier.

Installation: Oracle 10g on SUSE Linux 10.1

Can this be? I sat for hours preparing my all new clean SUSE Linux 10.1 server for the installation of Oracle 10g (Standard Edition)... and when running the installer it simply tells me that SUSE 9 is needed...
I've found others here in the forum having experienced the same.
Maybe I just downloaded the wrong version of Oracle?
The main download page is at:
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
I selected entry "Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86" (the one directly below the Windows version):
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201linuxsoft.html
The size of the file^^ is 668,734,007 bytes.
Or should i have downloaded entry "Oracle Database 10g Release 2 (10.2.0.2) for z/Linux":
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10202zlinuxsoft.html
The size of the file^^ is 838,518,746 bytes.
By the way, all these versions on the main page should have some kind of description, something like "This is the Linux Version for most standard 32Bit single and multiprocessor Intel compatible servers."
Well, since I'm completely stuck now with SUSE 10.1, is there any way to make the Oracle installer go on that SUSE version? Maybe SUSE can pretend to be version 9... but how do I achieve something freaky as this?
Thanks for any help, comments, suggestions...
Karsten

BTW, I think it's bad practice by Oracle not supporting SUSE 10.1.Actually, I think it is good practise for Oracle not to certify the public beta versions of an operating system.
Please remember that Fedora and SuSE Linux are cycled every 6-8 months, making then truly unstable for commercial purposes. IN addition, they are often desupported by the comminuty within 2-3 years, forcing upgrades. And finally, Both Red Hat and SuSE/Novell publically state that these are 'proving grounds for new features' (meaning they are beta).
Certification means that Oracle will invest heavily and train people on the specific operating system and work with the operating system supplier, 24x7 if needed, to make sure that customers will continue in production. I am not aware that the SuSE Linux or Fedora supporters are willing to put in 24x7 support they way the Red Hat and SuSE Enterprise groups are.
This does not imply the public OSs are bad. It just means that Oracle (and I) believe they are unsuited for commercial, business mission critical, immediate support required, environments.
By the way, I have the combination of Oracle10g and SuSE Linux 10.1 working, and it works well. However, I did need to make sure that the libraries to which Oracle10g was compiled are available in the OS.
Or maybe Sybase does better.... ;-pNot if the [glibc] libraries are incompatible. Nor does PostgreSQL nor MySQL.

10g R2 on Linux x86

Similar Messages

Maybe you are looking for