10g RAC installation fails....

Hello All,
I am new to RAC installation.while doing the installation in 2node cluster,till the configuration assisstants windows everything went fine. in CA while checking the status,the oracle clusterware config assistant failed with the following log....
INFO: Starting Install on nodes 'server004'
INFO: Saving Cluster Inventory
INFO: Running command 'C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\oui\bin\setup.exe -jreLoc C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\jre\1.4.2 -paramFile C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\oui/clusterparam.ini -silent -ignoreSysPrereqs -attachHome -noClusterEnabled ORACLE_HOME=C:\oracle\product\10.2.0\crs ORACLE_HOME_NAME=OraCr10g_home CLUSTER_NODES=server003,server004 CRS=true "INVENTORY_LOCATION=C:\Program Files\Oracle\Inventory" LOCAL_NODE=server004 -remoteInvocation -invokingNodeName server003 -logFilePath "C:\Program Files\Oracle\Inventory/logs" -timestamp 2010-05-18_11-41-42AM' on the nodes 'server004'.
INFO: Deleting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Creating service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Starting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Stopping service OracleOUIOraCr10g_homeService on nodes server004.
INFO: Deleting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: RUN_RECOMMENDED_TOOLS FIRST is set to false
INFO: No of Recommended Tools5
INFO: plugin-list is created
INFO: pluginlist is updated for: Oracle Clusterware current size: 1
INFO: No of ExitOnly Tools in this session: 0
INFO: cf session for perform has hashcode: 1040982
INFO: detached tool list getting prepared fo comp: Oracle Clusterware
INFO: cfsession hashcode for exit only tools: 1040982
INFO: hashcode for action: 17596838
INFO: No of ExitOnly Tools: 0
INFO: saving exit only tools ...
INFO: no detached only tools in this session
INFO: exit-only tools are created in single installation
INFO: no. of sets of tools to be run: 1
INFO: ca page to be shown: true
INFO: exitonly tools to be excuted passed: 0
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
ocr upgrade failed with (-1073741819)
Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat has failed
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
Have 1GB RAM in both the nodes.
could any one help me to solve this?
Thanks,
Derick
Edited by: user4487322 on May 18, 2010 1:46 AM

Thank you madrid.I am installing the RAC in windows2003 sp2 server.in the link till the step no#12(12. The Configuration Assistants page appears.)everything went
fine.while checking the 'Virtual Private IP Configuration Assistant',the installation fails with following error.....
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" succeeded
INFO: Command = C:\oracle\product\10.2.0\crs/bin/racgons.exe add_config server003:6200 server004:6200
INFO: Configuration assistant "Oracle Notification Server Configuration Assistant" succeeded
INFO: Command = C:\oracle\product\10.2.0\crs/bin/oifcfg.exe setif -global "Local Area Connection"/10.28.25.0:public "Local Area Connection 2"/10.10.10.0:cluster_interconnect
INFO: Configuration assistant "Oracle Private Interconnect Configuration Assistant" succeeded
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
Execution of the plugin was aborted
INFO: Configuration assistant "Virtual Private IP Configuration Assistant" was canceled.
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
Execution of the plugin was aborted
INFO: Configuration assistant "Virtual Private IP Configuration Assistant" was canceled.
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
I am able tp ping all my IP's from both the nodes,with host name &alias specified in the host file.
any thing else to be checked to fix "Virtual Private IP Configuration Assistant"?Any help?

Similar Messages

Quick 10g RAC Installation guide for Solaris

I am looking for quick/step by step guide/article for 10g RAC installation for Solaris

Hi, also you can get more information about the install process into Oracle documentation, please review the next link, there you found extensive information about this process.
http://download.oracle.com/docs/cd/B19306_01/install.102/b14205/toc.htm
Good luck
Regards,

Oracle 10g RAC installation on HP-UX 11.31 for SAP ERP 6.04

Dear experts,
We are trying to install SAP ERP 6.0 EHP4 with Oracle 10g RAC on HP-UX 11.31. Please note that, We are using VERITAS cluster filesystem (CFS) for this purpose and not HP-UX ServiceGuard ClusterFileSystem.
*As per SAP procedure, we have installaed plain plain SAP system with single instance Oracle (ref: Configuration of SAP NetWeaver for Oracle Database 10gRAC guide). Now we are first trying to install Oracle Clusterware (CRS) and then we will install Oracle RAC software. Is this procedure right?*
Which file (and its path) we have to use for CRS installation and its patch? Is it runInstaller under /oracle/stage/102_64/clusterware? With this file we can install CRS 10.2.0.1. Similarly for Oracle RAC, which files we are supposed to use, i.e for installation and patch upgrade?
Also can we use clusterware package available from Oracle directly in the SAP environment?
We tried to install CRS with runInstaller while running Configuration Assistant after root.sh script.
The following commands are failing in Configuration Assistant:
/oracle/CRS/102_64/bin/racgons add_config erpprdd1:4948 erpprdd2:4948
/oracle/CRS/102_64/bin/oifcfg setif -global lan1/20.20.20.0:cluster_interconnect lan0/192.168.3.0:public
/oracle/CRS/102_64/bin/cluvfy stage -post crsinst -n erpprdd1,erpprdd2
1st command does not give any output if run manually.
2nd commands o/p: PRIF-12: failed to initialize cluster support services
3rd commands fails in every check
Please suggest the solution and expecting answers to the above mentioned questions.
Thanks & Regards,
Tejas

>
Charles Yu wrote:
> Q1: Oracle RAC with 9.2.x on HP-UX?
> A: For HA environment, cluster software is: MC/SG on HP-UX 11.31; there are optional components of MC/SG for supporting Oracle RAC and SAP application. I was confused that I could not find the installation guide regarding 4.6C on MC/SG HA environment of HP-UX.
> Charles
Relevant docs for Service Guard (SG) cluster are available at http://docs.hp.com. Hope you have checked for the suport of oracle 92x on HP-UX 11.31
>
Charles Yu wrote:
> Q2: Any reason why you don't use a supported database version?
> A: Actually, in order to avoiding the the risk of database upgrade and minimizing the migration risk, top level has decided that keeping the same Oracle version. Indeed, we don't plan the migration of application. On the other hand, it is complicated to do the assessment for application migration.
> Charles
You can go for combined os migration and db release upgrade also at a stretch with the same downtime.

Oracle 10g rac installation on IBM power server

Dear Gurus,
I am installing Oracle 10g RAC on IBM power server but while running CRS getting the following errors. Please help to resolve this issue.
OUTPUT from Installation log:
INFO: Start output from spawned process:
INFO: INFO:
INFO: /oracle/app/oracle/product/crs/bin/genclntsh
INFO: /usr/bin/ld: cannot find -lxl
INFO: collect2: ld returned 1 exit status
INFO: genclntsh: Failed to link libclntsh.so.10.1
INFO: make:
INFO: *** [client_sharedlib] Error 1
INFO: End output from spawned process.
INFO: INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'client_sharedlib' of makefile '/oracle/app/oracle/product/crs/network/lib/ins_net_client.mk'. See '/oracle/app/oracle/oraInventory/logs/installActions2011-12-26_04-40-48PM.log' for details.
Exception Severity: 1
INFO: Exception handling set to prompt user with options to Retry Ignore
SYSTEM:
IBM power server
Linux 5.3
I have already tried changing ORACLE_HOME,CRS_HOME,LD_LIBRARY_PATH but nothing worked.
Regards,
Prajash

Those errors remind me on errors I encountered when I was trying to do installation that was not certified,
so try to check if installation you are doing is actually supported.
In the meantime , visit metalink and read document [ID 460969.1] , */usr/bin/ld: Cannot Find -lxml10, Genclntsh: Failed To Link Libclntsh.so.10.1*

CRS-0213 error during 10g RAC installation

The two nodes are 2 Sun machines. The Oracle CRS installation went smoothly without incidents. I then kicked in the 10g DB RAC installation. At the end of the installation, I got error. I took a snapshot here:
http://bostonfx.com/temp/ora10g.gif
Any advise is much appreciated,
Lucas

Hi Lucas -
This sounds simliar to Bug 3584146 PRKR-1008 adding instance to CRS via SRVCTL. The published workaround follows:
The workaround is to give permissions on the vip resources for all oracle users on the machine.
crs_setperm ora.<nodename>.vip -u user:<orauser1>:rwx
crs_setperm ora.<nodename>.vip -u user:<orauser2>:rwx
Repeat this for all oracle users on the system.
Hope this helps
-shawn

RH Linux VIP configuration not working for Oracle 10g RAC installation

Hi all,
I am trying to setup my test cluster on Oracle 10gR2 and Red Hat Linux 4. I have the public and private networks working fine and setup. However, after I setup the two VIP addresses, I cannot even ping these two virtual IPs from Linux. CRS install fails during initial run because it cannot communicate with the two VIP IP addresses. Can anyone help me out as to how to go about fixing the two VIPs so that Linux can ping them and CRS will install?
Thanks

It sounds like you configured your VIP on Linux in advance, before installing Oracle.
You are not supposed to do that.
Decide on an IP that the VIP will use with your network manager, but don't configure it in Linux. So before you start the clusterware install, ifconfig should not show your VIP.
CRS does not need VIP when you install the clusterware, only the interconnect address.
VIP is configured using a utility called VIPCA. If Clusterware installation fails and you think it was caused by VIP issues, try running VIPCA manually and let us know what were the results.

Oracle 10g RAC installation on linux server.

HI,
Can anybody help me that to give some answers of my question's ?
can i install oracle 10g RAC on a single hdd linux server which is installed on an ordinary intel processor based machine.
if i can then plz tell me this how can i do this.
i am new in linux server just wanted to learn that how to install oracle 10g RAC.
thanks & Regards to all of my seniors..

The only option you have to install RAC on 1 machine is to use Oracle VM, VMWare or Linux Virtualization feature (Linux Xen).

Root.sh failing at node2 during 10g rac installation on vmware

Hi All,
I'm very new to Oracle RAC. I was trying to install 10gr2 rac on vmware. But while running root.sh script at node 2 I'm getting error like "Failure at check of Final Oracle Stack" . For the same I tried a lot to find the solution from this forum and also from other sources but did not get any proper solution. So any help from you experts is highly appreciable. Let me tell you how I'm getting this error.
1.Install vmware and RHEL 4 as guest OS.
2.Create a virtual machine as RAC1 and configured shared storage by adding 5 virtual disks(1-ocr,1-voting,3-asm)
3.Then clone RAC1 to a new virtual machine RAC2.
4.After binding and assigning permissions all raw devices(raw1,raw2,raw3,raw4,raw5) are available in both the virtual machines.
5. Then create user equivalence for both the system and each node is reach from other node also.
6. Now when I tried to install Oracle 10gr2 clusterware it got completed at RAC1 and I ran the required scripts but while running root.sh on RAC2 I got the above mentioned error.
I did OCR check at both the nodes and found both are different. Also the cssd.log gives error message like OCR mismatch.
Now here my question is as Firewal is disabled and all the configurations are proper though I'm getting the same error.
Can anyboy provide some suggestion on resolving this issue.
Thanks

/dev/raw/raw1 /dev/sdb1
/dev/raw/raw2 /dev/sdc1
/dev/raw/raw3 /dev/sdd1
/dev/raw/raw4 /dev/sde1
/dev/raw/raw5 /dev/sdf1
The 1st one is for OCR and the next one is for Voting Disk and the rest are for asm. Also the permission are same across the two virtual machines.
root:oinstall /dev/raw/raw1
oracle:oinstall /dev/raw/raw2
oracle:oinstall /dev/raw/raw3
oracle:oinstall /dev/raw/raw4
oracle:oinstall /dev/raw/raw5
Thanks

Oracle 10g RAC query fails

Hi,
I am a newbie to RAC implementations, I have a strange problem on the one we are testing,
Failure (forced shutdown) of one of the nodes results in queries on the other node returning with a ORA-12805. This happens only in certain cases, otherwise the query waits for some time and completes. We are using Redhat 3, Oracle 10g (10.2.0.1.0) and TAF with SELECT and PRECONNECT options. Is there some reason and remedy on why this fails on only one of the nodes ?.

Hi
From metalink
ORA-12805
=========
Error Summary
ORA 12805 parallel query server died unexpectedly (Oerr:ORA.12805)
Error Details
~~~~~~~~~~~~~
Error: ORA 12805
Text: parallel query server died unexpectedly
Cause: The PMON process is cleaning up the process because a parallel query
server terminated unexpectedly.
Action: Check for operating system errors and retry the statement.
If this problem persists, contact customer support.
When a ORA-12805 occurs in most cases you will also see another error, ORA-600 or
a ORA-7445.
Best thing for you to do is to check all logs (that may include alert, crs, css etc) and determine the cause of node crash.
Regards
Adnan

Oracle 10g Express installation fails

All,
I've been looking in the forum for a solution to my problem but I can't find one. I'm a complete novice when it comes to databases
I have a sevrer with windows 2003 sp2, 2 drives 40B+ free space and 2GB ram
No applications are running on this server
I had a previous version of 10g express edition installed on this same server, which I deleted using oracle uninstall doc and windows clean up utlity.
When trying to install Oracle 10g express edition I get past the install location, DB passoword and ports for function. during the 'copying files' part of the installation the installation just dies/exits.
the user account I'm using is local administator (not domain) on the server.
I've stopped all antivirus services.
The only error in event viewer show the following error
The description for Event ID ( 0 ) in Source ( IDriverT ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Service stopped.
the install log shows the follow (last few lines of importance).
1: Not using skins for this installation. Could not find skin file .
MSI (c) (B4:B4) [15:51:43:914]: Note: 1: 2262 2: DuplicateFile 3: -2147287038
MSI (c) (B4:B4) [15:51:43:946]: Note: 1: 2262 2: ISRequiredFeature 3: -2147287038
MSI (c) (B4:B4) [15:51:44:195]: Note: 1: 2205 2: C:\DOCUME~1\testlocaluser\Local Settings\Temp\1\_isE\Oracle Database 10g Express Edition.msi 3: ISAlias
MSI (c) (B4:B4) [15:51:44:195]: Note: 1: 2228 2: C:\DOCUME~1\testlocaluser\Local Settings\Temp\1\_isE\Oracle Database 10g Express Edition.msi 3: ISAlias 4: SELECT * FROM ISAlias
1: Ready to launch program block.
MSI (c) (B4:B4) [15:51:44:351]: PROPERTY CHANGE: Modifying NLS_LANG property. Its current value is 'AMERICAN_AMERICA.WE8MSWIN1252'. Its new value: 'ENGLISH_UNITED KINGDOM.WE8MSWIN1252'.
MSI (c) (B4:B4) [15:51:44:351]: PROPERTY CHANGE: Modifying BUILDTYPE property. Its current value is '85'. Its new value: '87'.
1: User aborts the installation, ready to launch __OnAbort.
MSI (c) (B4:B4) [15:52:42:698]: Destroying RemoteAPI object.
MSI (c) (B4:88) [15:52:42:698]: Custom Action Manager thread ending.
=== Verbose logging stopped: 17/06/2010 15:52:42 ===
I running out of ideas. Can anyone help or shed some light as to what is happening. It can't be storage space or memory as there is nothing running on this box.
Thanks in adavnce

You might have better luck on the Oracle Express Forum, which is the only support location for the product.
Otherwise check the registry entries to make sure there is nothing that might interfere.
HTH -- Mark D Powell --

Set up Virtual IP and Private IP for each node in RAC installation

I am new to Oracle 10G RAC installation, based on the documentation, I need to assign a public IP, Virtual IP, private IP for each node, I know how to assign public IP for each node, I can assign the IP from the router, but I don't know how to assign the Virtual IP and private IP, since the private network is only connected by a switch, the switch is not able to assign IP to server, should I just go to the host file
%SystemRoot%\system32\drivers\etc\hosts
of each node to put IP in the file? what else should I do? I already read through the document from Oracle "Oracle Real Application Clusters, Quick Installation Guide for Oracle Database Standard Edition 10g Release 1 for window".

I am still keep thinking why each node need a virtual IP address? if each mode has a virtual IP, which IP address the client can be specified? I have multiple application servers work as clients.

Installation of oracle 10g rac on open solaris for X86 Machine

Hi
Can you please let me know the advantages of installation of oracle 10g rac on open solaris on x86 machine.And also let me know the detail steps involved in instatllation of oracle 10g rac on open solaris on x86. please suggest the recommdendation for the installation
Thanks
Saiprasath

If by "advantages of installation of oracle 10g rac on open solaris on x86 machine" you mean advantages over RAC on Linux or AIX or HP/UX there aren't any.
If you want to know the advantages of RAC over stand-alone they generally relate to:
1. Eliminating the server as a single point of failure
2. Transparent fail-over
2. Incremental horizontal scalability

RPM's Existance failed in RAC INSTALLATION

Hi,
I'm configuring 10g RAC On linux 4, when i RUN the cluster verification utility .i.e is
./runcluvfy.sh stage -pre crsinst -n rac5,rac6
Everything is passed but when it came to checking for RPM's that are needed , it is getting failed. the following is RPM's is not existing.
Package Existance check failed for "compat-gcc-7 .3-2.96.128"
Package Existance check failed for "compat-gcc-c++ - 7.3-2.96.128"
so ,where can i download these Packages.

startup wrote:
Hi,
I'm configuring 10g RAC On linux 4, when i RUN the cluster verification utility .i.e is
./runcluvfy.sh stage -pre crsinst -n rac5,rac6
Everything is passed but when it came to checking for RPM's that are needed , it is getting failed. the following is RPM's is not existing.
Package Existance check failed for "compat-gcc-7 .3-2.96.128"
Package Existance check failed for "compat-gcc-c++ - 7.3-2.96.128"
so ,where can i download these Packages.you dont need to download them. they are already present in your installation DIsk in the Server folder

Oracle 10g R2 installation with ASM+RAC

Gurus,
Need some suggestuon on Oracle 10g R2 installation with ASM and RAC option.
We have found many documents on the Oracle, HP, HP-Oracle CTC and third party web sites, but nothing that is specific to this particular combination of separate
ORACLE_HOMEs, ASM and 10g RAC CRS. It is unclear for me from the documentation how this combination of ASM and 10.2g RAC may best be installed.
The high level steps i got after reading lot of docs as follows - but i am not sure whether these are correct or not. if they are correct, can any one share their experience/notes please?
1) Install CRS
2) Install RDBMS for ASM HOME - create separater oracle home for ASM instance using OUI
3) Install RDBMS for RAC Database Home - create separater oracle home for RAC database using OUI
4) Create ASM database using DBCA -
5) Use dbca to create database.

Oracle provides 'paint by numbers' tutorials called 'Oracle By Example'. (Go to OTN, check under the Training tab)
They have one for a Windows based ASM/RAC that you might want to review. Not your specific environment, but the steps will be dag-nabbed close.
I recommend walking the path (http://otn.oracle.com >> training:OBE >> Database 10g Release 1:VMWare:Installation
http://www.oracle.com/technology/obe/obe10gdb_vmware/install/racinstallwin2k/racinstallwin2k.htm

Asm, instance and service failing to start 10g rac redhat el5

hi,
i have been following a how to guide from oracle's website about implementing a 10g rac system using el5 (http://www.oracle.com/technology/pub/articles/hunter_rac10gr2_iscsi.html), by the end of the installation and setup I had both the nodes up and running and all services were up and running. Then under the root account I rebooted one of the nodes. now when I check the status of the services I get this:
[oracle@rac01 ~]$ crs_stat -t
Name           Type           Target    State     Host
ora.orcl.db    application    ONLINE    ONLINE    rac01
ora...._taf.cs application    ONLINE    ONLINE    rac02
ora....cl1.srv application    ONLINE    OFFLINE
ora....cl2.srv application    ONLINE    ONLINE    rac02
ora....l1.inst application    OFFLINE   OFFLINE
ora....l2.inst application    ONLINE    ONLINE    rac02
ora....SM1.asm application    OFFLINE   OFFLINE
ora....01.lsnr application    ONLINE    ONLINE    rac01
ora.rac01.gsd application    ONLINE    ONLINE    rac01
ora.rac01.ons application    ONLINE    ONLINE    rac01
ora.rac01.vip application    ONLINE    ONLINE    rac01
ora....SM2.asm application    ONLINE    ONLINE    rac02
ora....02.lsnr application    ONLINE    ONLINE    rac02
ora.rac02.gsd application    ONLINE    ONLINE    rac02
ora.rac02.ons application    ONLINE    ONLINE    rac02
ora.rac02.vip application    ONLINE    ONLINE    rac02though I can start the asm instance manually by
srvctl start asm -n rac01and it starts but the instance and service on the rebooted node still wont start. is there a log file which tells me what the error is when it tries to start the instance? what can I do to ensure that if a node is rebooted that all of the services get started correctly and the node automatically rejoins the cluster (i thought I had set all of this from the instructions of the guide I was following).
Regards
Martin.

Check ASM resource:
crs_stat -p "resource_name
$ crs_stat | grep NAME\= | grep ASM1
NAME=ora.rac01.ASM1.asm
$ crs_stat -p ora.rac01.ASM1.asm
NAME=ora.rac01.ASM1.asm
TYPE=application
ACTIVE_PLACEMENT=0
*AUTO_START*=1
CHECK_INTERVAL=600
DESCRIPTION=CRS application for ASM instance
What do you see AUTO_START?
if 1 = auto start:
or check error ASM while start... at ASM_HOME/log/rac01/racg/*
If AUTO_START=2
Oracle Clusterware is configured to start the VIP, listener, instance, ASM, database services and other resources during system boot. Starting with 10.1.0.4, it is possible to modify some resources to have their profile parameter AUTO_START set to the value 2. This means that after node reboot, or when Oracle Clusterware is started, resources with AUTO_START=2 will need to be started manually via srvctl. Please work with Oracle Support if you need to modify this attribute.
If AUTO_START=2 and need to change to 1:
Example:
$ crs_stat -p ora.rac01.ASM1.asm
NAME=ora.rac01.ASM1.asm
TYPE=application
ACTIVE_PLACEMENT=0
AUTO_START=2
$ crs_stat -p ora.rac01.ASM1.asm > ORA_CRS_HOME/crs/public/ora.rac01.ASM1.asm
$ crs_unregister ora.rac01.ASM1.asm
$ crs_stat -p ora.rac01.ASM1.asm
CRS-0210: Could not find resource 'ora.rac01.ASM1.asm
$ vi ORA_CRS_HOME/crs/public/ora.rac01.ASM1.asm.cap
AUTO_START=2
to
AUTO_START=1
$ crs_register ora.rac01.ASM1.asm
$ crs_stat -p ora.rac01.ASM1.asm
NAME=ora.rac01.ASM1.asm
TYPE=application
*AUTO_START=1*
Edited by: Surachart Opun (HunterX) on Jul 31, 2009 1:06 PM

10g RAC installation fails....

Similar Messages

Maybe you are looking for