10g rac on fedora

I have fedora linux as my new operating system i was thinking what version of oracle 10g RAC will be applicable for this operating system

I installed 11g1 successfully on Fedora 9
beware the instructions that begin with running the installer
for Linux/unix, there is a lot of preparation involved
Next I have a working php program that accesses 11g1 from the browser
I can send these!
Edited by: landonmkelsey on Dec 4, 2008 7:48 AM

Similar Messages

MULTIPLE USERS 10G RAC ORACLE_HOME INSTALL WITH ASM/CRS

Hi,
We need to install multiple 10g RAC databases on a two node Sun servers. Below is our configuration:
1) Sun Solaris (ver 10) with Sun Cluster 3.2
2) One ASM/CRS install (by 1 OS account)
3) Four ORACLE_HOME 10g database install (by 4 different OS user accounts)
We would like to use one ASM instance for all four databases with appropriate privileges.
OS User:           OS Group
========      =========
oraasm           dbaasm - (ASM and CRS install owner)
ora1           dbaora1 - first db owner
ora2           dbaora2 - second db owner
ora3           dbaora3 - third db owner
ora4           dbaora4 - fourth db owner
I understand that certain privileges need to be shared between ASM/CRS and DB owners. Please let me know the steps to be followed to complete this install.
Thanks in advance.

Hi
Please read that: Documentation http://download.oracle.com/docs/html/B10766_08/intro.htm
- You can install and operate multiple Oracle homes and different versions of Oracle cluster database software on the same computer as described in the following points:
-You can install multiple Oracle Database 10g RAC homes on the same node. The multiple homes feature enables you to install one or more releases on the same machine in multiple Oracle home directories. However, each node can have only one CRS home.
-In addition, you cannot install Oracle Database 10g RAC into an existing single-instance Oracle home. If you have an Oracle home for Oracle Database 10g, then use a different Oracle home, and one that is available across the entire cluster for your new installation. Similarly, if you have an Oracle home for an earlier Oracle cluster database software release, then you must also use a different home for the new installation.
If the OUI detects an earlier version of a database, then the OUI asks you about your upgrade preferences. You have the option to upgrade one of the previous-version databases with DBUA or to create a new database using DBCA. The information collected during this dialog is passed to DBUA or DBCA after the software is installed.
- You can use the OUI to complete some of the de-install and re-install steps for Oracle Database 10g Real Application Clusters if needed.
Note:
Do not move Oracle binaries from one Oracle home to another because this causes dynamic link failures.
. If you are using ASM with Oracle database instances from multiple database homes on the same node, then Oracle recommends that you run the ASM instance from an Oracle home that is distinct from the database homes. In addition, the ASM home should be installed on every cluster node. This prevents the accidental removal of ASM instances that are in use by databases from other homes during the de-installation of a database's Oracle home.

Oracle 10g RAC installation on HP-UX 11.31 for SAP ERP 6.04

Dear experts,
We are trying to install SAP ERP 6.0 EHP4 with Oracle 10g RAC on HP-UX 11.31. Please note that, We are using VERITAS cluster filesystem (CFS) for this purpose and not HP-UX ServiceGuard ClusterFileSystem.
*As per SAP procedure, we have installaed plain plain SAP system with single instance Oracle (ref: Configuration of SAP NetWeaver for Oracle Database 10gRAC guide). Now we are first trying to install Oracle Clusterware (CRS) and then we will install Oracle RAC software. Is this procedure right?*
Which file (and its path) we have to use for CRS installation and its patch? Is it runInstaller under /oracle/stage/102_64/clusterware? With this file we can install CRS 10.2.0.1. Similarly for Oracle RAC, which files we are supposed to use, i.e for installation and patch upgrade?
Also can we use clusterware package available from Oracle directly in the SAP environment?
We tried to install CRS with runInstaller while running Configuration Assistant after root.sh script.
The following commands are failing in Configuration Assistant:
/oracle/CRS/102_64/bin/racgons add_config erpprdd1:4948 erpprdd2:4948
/oracle/CRS/102_64/bin/oifcfg setif -global lan1/20.20.20.0:cluster_interconnect lan0/192.168.3.0:public
/oracle/CRS/102_64/bin/cluvfy stage -post crsinst -n erpprdd1,erpprdd2
1st command does not give any output if run manually.
2nd commands o/p: PRIF-12: failed to initialize cluster support services
3rd commands fails in every check
Please suggest the solution and expecting answers to the above mentioned questions.
Thanks & Regards,
Tejas

>
Charles Yu wrote:
> Q1: Oracle RAC with 9.2.x on HP-UX?
> A: For HA environment, cluster software is: MC/SG on HP-UX 11.31; there are optional components of MC/SG for supporting Oracle RAC and SAP application. I was confused that I could not find the installation guide regarding 4.6C on MC/SG HA environment of HP-UX.
> Charles
Relevant docs for Service Guard (SG) cluster are available at http://docs.hp.com. Hope you have checked for the suport of oracle 92x on HP-UX 11.31
>
Charles Yu wrote:
> Q2: Any reason why you don't use a supported database version?
> A: Actually, in order to avoiding the the risk of database upgrade and minimizing the migration risk, top level has decided that keeping the same Oracle version. Indeed, we don't plan the migration of application. On the other hand, it is complicated to do the assessment for application migration.
> Charles
You can go for combined os migration and db release upgrade also at a stretch with the same downtime.

How to configure Oracle 10g RAC on windown sever 2003

hi all
plz tell me
how to configure Oracle 10g RAC on windown sever 2003 can any body help me , give be any link
plz it is very necessary for me
Regards

Hello,
There are a good doc written by Philip Newlan at www.jobcestbon.com/oracle/RacOnWindows.pdf
Regards,
Rodrigo Mufalani
http://mufalani.blogspot.com

10g RAC on Linux

All,
I am having strange problem while setting up 10g RAC on Linux box. This is two node cluster (rac1 and rac2) Two probelms..
1. When I install CRS on rac1, it copies the files to rac2 and olsnodes -n works fine from both nodes, But when I run runinstaller on node 2 and try to see installed products, I don't see CRS oracle home there on rac2.
2. When I start installing 10g database on rac1 , at third step "Hardware Cluster Installation Mode:" I see my both nodes listed there, but I don't see "SELECT ALL" button on that screen. So when I finish installation, it doesn't copy files to rac2.
Does Anyone has any idea why it is behaving like this?
Thanks
Puneet

Hi,
I found one thing.. If I change ORACLE_HOME location while running OUI, it doesn't give SELECT ALL button , but if I let Installer to select oracle_HOME, it worrks fine and give SELECT ALL button too.
Don't understand why it is behaving like this?
Puneet

10g RAC on VMWare Workstation

Hi Folks,
i tried to install 10g RAC on VMWare 4.5.2 for testing.
Hostsystem is XP, ghost system are RedHat-ES-30.
I configured tho 2 nodes with 2 scsi adapters and 2 Network Card and a shared Disk.
I installed ocfs 1.0.12 on both nodes, formated the disk and it seems to be fine.
On the next step ( Installation of CRS ) the runInstaller fails after the node configuration screen with the message:
Oracle Cluster Registry File can only be saved on a shared filesystem file or on a RAW Device.
Any Ideas ?
Thanks
Martin

Hi Laurent,
Thanks for your reply.
I checked that and i can't find the Processes or any think else witch is discribed in thr article !
The Installer pops a message during the creation of the ocr file.
Have any body tried it with RAW Devices ?
Martin

10g RAC upgrade to 11g RAC

How to perform 10g RAC upgrade to 11g with Dataguard in place?
OS=LINUX
RDBMS=10.2.0.4
DG=PHYSICAL STANDBY
Below is my understanding
1)Install 11g CRS in NEW_CRS_HOME
2)Install 11g in NEW_ASM_HOME
3)Install 11g in NEW_RDBMS_HOME
4)Export the new NEW_ORACLE_HOME and start up the database with startup upgrade.
5) Run the catupgrade.sql script.
Are there any other steps involve?
In case I have to rollback then how to rollback CRS.

Personally I would use DBUA instead of catupgrade.sql, but make sure you follow the upgrade documentation for pre-checks etc. You will also need to use netca to recreate the sqlnet listeners in the 11g homes and register with 11g CRS.
CRS is generally fairly quick to re-install and re-register databases, and this is cleaner than trying to restore OCR and VOTE disks etc. If you prefer to rollback be sure you backup the OCR and VOTE disks (e.g use dd), backup /etc/oracle, CRS_HOME, /etc/init* scripts etc.
The dataguard standby database should roll forward through the upgrade, but you will need to manually register the standby with 11gCRS. Make sure you have your DB and Log create_file_dest's set, as well as standby_file_management=auto. Personally I would manually recover the standby after the upgrade in case I need to use it to fallback.
Edited by: rgeier on Sep 1, 2009 3:51 PM

10g RAC - should I use RAW, OCFS and/or ASM ?

I am about to install 10G RAC on RHAS3. Options for sharing disk partitions are raw, OCFS and ASM. The OCR and voting files must be raw or OCFS, I would tend to go for OCFS in this case. For the Oracle datafiles, again, I would tend to go for OCFS simply for ease of management since ASM seems to add another layer of complexity, and raw lacks flexibility. OCFS however is also new technology and may still have some stability issues. I'm not yet sure of our disk configuration, but there will be HBA cards in each machine with one or two SAN partitions, so I don't expect some of the ASM features such as mirroring etc. will be required as this will be done in the hardware. Does anyone have any recommendations or experiences(good or bad) in which way to go ?
Philip

We're using raw partitions for some years now, (since oracle 8i, then 9i and now 10g). It is quite flexible, but you shouldn't use physical partitions but LVM. It's very stable.
Now on 10g we're using ASM on some sites where mirroring is needed. It works, but not so stable as raw. we discover some bugs as well.
We've never used OCFS. I don't like it. To much limits. I belive that special utilities are needed for managing files. I don't like linux system software produced by oracle.

10G RAC on AIX without ASM & HACMP.

Hi,
I want to install ORACLE 10G RAC on AIX but I dont want ot use ASM or HACMP/GPFC.
Just want to install with CRS and RAW devices.Is it possible to install 10g RAC with CRS and RAW devices.
What is the best approach for this.
Regards
MMU

We're running CRS on AIX. No ASM or HACMP.
We do have the db datafiles on GPFS. We've also got one voting disk on GPFS and two on raw devices.

CRS-0210: Could not find resource while start ASM on 10G RAC

Dear All
I'm trying to install 10g RAC on Redhat 4.1. At the point at which I try to start ASM it fails with the message
ORA-03113: end-of-file on communication channel
select value from v$parameter where name='instance_type'
ERROR at line 1:
ORA-01034: ORACLE not available
This seems to be due to a failure CRS. The trace file shows:
[Thread-11] [17:14:2:907] [HAOperationImpl.runCommand:1254] CRS cmd is: /u01/app/oracle/product/10.2.0/crs/bin/crs_stat -u ora.bfhxx-sql012.ASM1.asm
[Thread-41] [17:14:2:964] [StreamReader.run:65] OUTPUT>CRS-0210: Could not find resource ora.bfhxx-sql012.ASM1.asm.
Executing
/u01/app/oracle/product/10.2.0/crs/bin/crs_stat
produces:
NAME=ora.bfhxx-sql012.LISTENER_BFHXX-SQL012.lsnr
TYPE=application
TARGET=ONLINE
STATE=ONLINE on bfhxx-sql012
NAME=ora.bfhxx-sql012.gsd
TYPE=application
TARGET=ONLINE
STATE=ONLINE on bfhxx-sql012
NAME=ora.bfhxx-sql012.ons
TYPE=application
TARGET=ONLINE
STATE=ONLINE on bfhxx-sql012
NAME=ora.bfhxx-sql012.vip
TYPE=application
TARGET=ONLINE
STATE=ONLINE on bfhxx-sql012
Is this a red herring or is it the reason ASM won't start? At what point should this entry have been created (ie should it already exist when ASM starts or should ASM create it)? Can I manually create the entry using crsstat.
Many thanks
Paul

It all depends on what your mapping problem was and what you did to resolve it. Here are a couple of things you could try:
-Make sure the orc.loc file on ebdb1 has the same entry as ebdb2. Also, say you are using shared raw devices for CRS: make sure your raw devices are consistent on both nodes.
If the above does not work
-Make sure the shared devices are consistent on both nodes and restore one of the OCR backups. I am sure at least one of the backups 4hrs/8hrs/1day/2day/1week some thing must be a worthwhile. If you do restore OCR from a backup make sure to run cluvfy before you start your CRS.
Always a good practise to take a backup of status quo before you restore from the backups.
It would be interesting to know what lead to your disk mapping problem in the first palce.
Good Luck!

Oracle 10g rac installation on IBM power server

Dear Gurus,
I am installing Oracle 10g RAC on IBM power server but while running CRS getting the following errors. Please help to resolve this issue.
OUTPUT from Installation log:
INFO: Start output from spawned process:
INFO: INFO:
INFO: /oracle/app/oracle/product/crs/bin/genclntsh
INFO: /usr/bin/ld: cannot find -lxl
INFO: collect2: ld returned 1 exit status
INFO: genclntsh: Failed to link libclntsh.so.10.1
INFO: make:
INFO: *** [client_sharedlib] Error 1
INFO: End output from spawned process.
INFO: INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'client_sharedlib' of makefile '/oracle/app/oracle/product/crs/network/lib/ins_net_client.mk'. See '/oracle/app/oracle/oraInventory/logs/installActions2011-12-26_04-40-48PM.log' for details.
Exception Severity: 1
INFO: Exception handling set to prompt user with options to Retry Ignore
SYSTEM:
IBM power server
Linux 5.3
I have already tried changing ORACLE_HOME,CRS_HOME,LD_LIBRARY_PATH but nothing worked.
Regards,
Prajash

Those errors remind me on errors I encountered when I was trying to do installation that was not certified,
so try to check if installation you are doing is actually supported.
In the meantime , visit metalink and read document [ID 460969.1] , */usr/bin/ld: Cannot Find -lxml10, Genclntsh: Failed To Link Libclntsh.so.10.1*

ASM 10g RAC

Hi Team,
We are using 10g RAc with ASM file system....here the problem is ..One of our engineer by mistake added a datafile in File System insted of adding into ASM disk groups.. it has created in node1 oracle home location....and the file is currently used by database....
295 +DG8/datafile/pm_tdat1_084.dbf                     10240
296 +DG9/datafile/pm_tdat_001.276.771180789            10240
*297 /oracle/product/10.2.0/db_1/dbs/+DG5 5120*
298 +DG9/datafile/pm_tidx_001.277.771224587             5120
How to make this as ASM file system..!!
Thanks,
MM
Edited by: user7439393 on Dec 30, 2011 12:29 AM

The backup into the ASM diskgroup can be done online.
For the switch to copy and the following recover datafile, the datafile needs to be set offline, though.
The amount of Redo, generated during the Online Backup determines the time the recovery will need.
Kind regards
Uwe Hesse
http://uhesse.wordpress.com

Oracle 10g RAC

Hi All,
I am a research student currently struggling to install Oracle 10g RAC on Windows OS.What i understand about a Oracle RAC database system is that it involves a configuration of multiple hosts or servers joined together with a clustering software and accessing the shared disk structures.What i also understand is that i need a CRS provided by Oracle for a Windows or Linux based RAC installation.
What i don't understand is for a Two node RAC system do i need a Third machine which has the shared storage device.If yes do i have to install a copy of Oracle 10g Enterprise Edition and CRS on the shared storage device moreover do i need to install a copy of Oracle 10g Enterprise edition on each of the nodes or just the clusterware is enough.

Hi Salil
No, you do not need a third machine. You can even setup RAC as a single node on one machine! What you do need is to have some sort of cluster aware file system. Try looking at OCFS on Windows in your case.
If you are interested in a Linux example please have a look at the examples at http://ocpdba.net/oracle9i_rac/cheaprac.html and http://ocpdba.net/oracle10g_rac for an OCFS implementation I am working on.
regards,
Ahbaid

Oracle 10G RAC - Public & Heartbeat on 1 NIC

Hello all,
actually I am installing Oracle 10G RAC on rhel 4 (4 node cluster). But the Cluster Verification Utility aborts with errors. I checked the configToolAllCommands and tried to run the failed commands manually:
#/opt/oracle/crs/bin/oifcfg setif -global eth0.100/172.18.0.0:cluster_interconnect eth0.728/172.16.128.0:public eth0.498/172.17.1.0:cluster_interconnect
PRIF-50: duplicate interface is given in the input
PRIF-50: duplicate interface is given in the input
PRIF-50: duplicate interface is given in the input
Question:
Is it possible to put Public & Heartbeat on one NIC (eth0.728 & eth0.498)
If not is their any workaround for that issue?
Output /etc/hosts
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
172.18.253.48 eu0266.[company].net cfmaster
172.16.128.11 eu0200.[company].net eu0200
172.16.128.12 eu0201.[company].net eu0201
172.16.128.13 eu0202.[company].net eu0202
172.16.128.14 eu0203.[company].net eu0203
172.18.13.11 eu0200m.[company].net eu0200m
172.18.13.12 eu0201m.[company].net eu0201m
172.18.13.13 eu0202m.[company].net eu0202m
172.18.13.14 eu0203m.[company].net eu0203m
# Private section
172.17.1.11 eu0200-priv.[company].net eu0200-priv
172.17.1.12 eu0201-priv.[company].net eu0201-priv
172.17.1.13 eu0202-priv.[company].net eu0202-priv
172.17.1.14 eu0203-priv.[company].net eu0203-priv
# Virtual section
172.16.128.16 eu0200-vip.[company].net eu0200-vip
172.16.128.17 eu0201-vip.l[company].net eu0201-vip
172.16.128.18 eu0202-vip.[company].net eu0202-vip
172.16.128.19 eu0203-vip.[company].net eu0203-vip
Output install log:
Checking existence of VIP node application (required)
Check failed.
Check failed on nodes:
eu0203,eu0202,eu0201,eu0200
Checking existence of ONS node application (optional)
Check ignored.
Checking existence of GSD node application (optional)
Check ignored.
Post-check for cluster services setup was unsuccessful on all the nodes.
Command = /opt/[company]/oracle/crs/bin/cluvfy has failed
INFO: Configuration assistant "Oracle Cluster Verification Utility" failed
*** Starting OUICA ***
Oracle Home set to /opt/[company]/oracle/crs
Configuration directory is set to /opt/[company]/oracle/crs/cfgtoollogs. All xml files under the directory will be processed
INFO: The "/opt/[company]/oracle/crs/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
Thanks in advance for your help!
Regards

Tads wrote:
Hi all,
I have a question about Oracle RAC and network interface.
We're using Oracle 10gR2 RAC with two nodes on Linux Red Hat.
Let's assume that the public network interface goes down.
I would like to know what happens with existing connections
on node with network interface with problems.
Are connections frozen, actives?
Can the users continue to use theses existing connections using the another node of RAC?If the interface is down? what do you think? All connections to this node will die. How does your application handle fail-over, does it attempt to reconnect or just have a complete application failure?
You should spend some time in a test lab where you can test this stuff for yourself. Read the documentation and there are tons of sites out there that purport to have all of your RAC/TAF/FAN/FAF questions. - I would read and trust the documentation first.
>
I know that the listener goes down and any other connections is allowed.
Thank you very much!!!!

Oracle 10g RAC on Windows

Installed Oracle 10g RAC on Windows... Everything was
working fine, now when I install CRS it completed at 100% and then in the configuration it gives error
INFO: exitonly tools to be excuted passed: 0
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat
PROT-1: Failed to initialize ocrconfig
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
ocr upgrade failed with (-1)
Execution of the plugin was aborted
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" was canceled.
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
I am using VMware WorkStation 5
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnWindows2003UsingVMware.php
I can see my disks from both machines. Open the "Computer Management" dialog (Start > All Programs > Administrative Tools > Computer Management
I use Windows XP SP2 as the host operating system
Any suggestion?
Message was edited by:
MEXMAN

You know its not certified?
My first thought when I read the subject of this thread, and before reading what you posted, is that you've either done no research on RAC or didn't understand what you've read.
You can create a RAC cluster using any operating system certified by Oracle.
But the operating system is the least important part of creating a cluster. The questions you need to be able to address are:
1. What is your solution to created shared storage?
2. What is your solution to create the cache fusion interconnect and VIPs?
If you don't have an answer to these questions you can not build a RAC cluster.

10g rac on fedora

Similar Messages

Maybe you are looking for