10g RAC with linux 3 AS+ocfs
Hi:
Is anyone install 10g RAC on linux 3AS with ocfs successfully?
I am having problem with CRS installation where installer ask to run root.sh. My first node finished root.sh without any problem but not second node it give me "Failure at final check of Oracle CRS stack." error. Moreover, I found "ERROR: clssnmconnect: failed, rc = 3, node samurai (1), (ADDRESS=(PROTOCOL=tcp)(HOST=racs01-priv1)(PORT=49895))" error in ocssd2.log file. However, I can ping privet and public ip/hostname without any problem. Any input or suggestions are welcome!
Did you ever get a responce to this?
I'm having the very same issue, which I can not find a work around.
Documents for the 10g install have been very few and far between, so any help would be the greatest!
Similar Messages
-
All,
I am having strange problem while setting up 10g RAC on Linux box. This is two node cluster (rac1 and rac2) Two probelms..
1. When I install CRS on rac1, it copies the files to rac2 and olsnodes -n works fine from both nodes, But when I run runinstaller on node 2 and try to see installed products, I don't see CRS oracle home there on rac2.
2. When I start installing 10g database on rac1 , at third step "Hardware Cluster Installation Mode:" I see my both nodes listed there, but I don't see "SELECT ALL" button on that screen. So when I finish installation, it doesn't copy files to rac2.
Does Anyone has any idea why it is behaving like this?
Thanks
PuneetHi,
I found one thing.. If I change ORACLE_HOME location while running OUI, it doesn't give SELECT ALL button , but if I let Installer to select oracle_HOME, it worrks fine and give SELECT ALL button too.
Don't understand why it is behaving like this?
Puneet -
Using ASSM in 10g RAC with SAP
Hi,
It is recommended to use ASSM (Automatic Segment Space Management) with using 10g RAC with SAP. Our deployment is currently a single instance database that is not using ASSM. We plan to convert this single instance database to a 10g RAC database. I wanted to know what the supported method is to convert to ASSM, during this process.
Will it require an export and import of the database?
ThanksHi Badar,
of course you can move tables (w/o longs) via ALTER TABLE MOVE... but why do you may want to do that?
ALTER TABLE MOVE is an OFFLINE action - nobody can access the table during the move.
DBMS_REDEFINITION (used by the BRTOOLS) is ONLINE. Normal work can proceed while the data is copied.
With ALTER TABLE MOVE you've to touch every single table (ca 50.000-80.000 in a SAP installation) by hand. PLUS you've to rebuild each index on each table by hand.
The BRTOOLS do all that for you. In parallel if you want to.
Moreover the BRTOOLS provide extensive logging in case any error should occur. ALTER TABLE MOVE does not.
So better forget about ALTER TABLE MOVE... use the BRTOOLS - they are not that bad
best regards,
Lars -
Does managing Oracle 10g RAC with ASM require full root access?
We currently have three entirely separate support areas, Unix, Storage and DBA. We're now considering using Oracle 10g RAC with ASM and as part of the assessment trying to work out if we can still draw similar support boundaries. I know that installing RAC and configuring ASM requires root access but will DBA continue to need root access to manage & support RAC? If so, does anyone know if the commands they need can be RBAC'd or if we just need to share root access going forwards. I've had a look at a number of docs including http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/toc.htm. which is fairly informative but none of them seem to mention the requirement for root access on Solaris. I'm guessing they just assume that it's available, but that's not generally the case in our environment.
All advice / info welcome!I would have thought that the only reason you would need root access once RAC and ASM had been set up would be to add more disks to the ASM configuration. This would be needed to change the ownership on the raw LUNs or to make additions to metasets (SVM/Oban) or diskgroups (VxVM/CVM). Beyond that, I can't imagine needing root access.
I'm sure others will chime in if they can think of other reasons!
Regards,
Tim
Edited by: Tim.Read on Jun 3, 2008 2:25 AM -
Hello
We are planning to have 10g eventually with 2 nodes in the next 2 weeks. We would like to start preparation, can we install it on our first node and then complete the install when the second is in place.Hi,
You start your prepration on Node1 straight away and can only Implement RAC when Node2 in its place.
Regards
Sunny -
Installing Oracle 10g rac on linux 4 using vmware :problem
Hi Expert ,
I'm facing problem on installing oracle 10g rac on centos 4x using vmware, installation is showing errors . The command failed are oifcfg, cluvfy
on running ./cluvfy stage -post crsinst -n rac1,rac2
error:
OCR integrity found invalid for rac1
OCR integrity found invalid for rac2
Please advice...
regards,
Shaanhi Experts,
orccheck failed for one of the node, can you please suggest what needs to be done now..
filename :/dev/raw/raw1
error "device/file integrity check failed"
error "device not configured"
Regards
Message was edited by:
Shaan_dmp -
Oracle 10g rac with redhat as4 u1.NFS Server on vmware5.5 install succeed!
test environment:
Vmware Workstation 5.5
RHEL4U1 For x86
Oracle 10g (10.1.0.2) For linux
Virtual machine 1: NFS Server
Virtual machine 2:RAC node 1
Virtual machine 3:RAC node 2Pl post in the RAC install forum - RAC, ASM & Clusterware Installation
HTH
Srini -
Crs installation problem in oracle 10g rac with NAS storage
Hi,
for my practice i am trying to install oracle 10gR2 on RHEL5-64bit OS in my laptop.
during my crs installation i have struckup with the below error while i am executing root.sh in node1.
Error:
+++++
Setting the permissions on OCR backup directory
Setting up NS directories
PROT-1: Failed to initialize ocrconfig
Failed to upgrade Oracle Cluster Registry configuration
ocrconfig.log ;
++++++++++++
NFS file system /u01 mounted with incorrect options
[ OCROSD][4265610768]WARNING:Expected NFS mount options: wsize>=32768,rsize>=32768,hard,(noac | actimeo=0 | acregmin=0,acregmax=0,acdirmin=0,acdirmax=0
[ OCROSD][4265610768]utopen:6m'': OCR location [share/storage/ocr] configured is not a valid storage type. Rturn code [37].
As per metalink i have find that this problem is fixed with Patch:4679769
# Patch Installation Instructions:
# To apply the patch, unzip the PSE container file:
# p4679769_10201_LINUX.zip
# Set your current directory to the directory where the patch
# is located:
# % cd 4679769
# Copy the clsfmt.bin binary to the $ORACLE_HOME/bin directory where
# clsfmt is being run:
# % cp $ORACLE_HOME/bin/clsfmt.bin $ORACLE_HOME/bin/clsfmt.bin.bak
# % cp clsfmt.bin $ORACLE_HOME/bin/clsfmt.bin
# Ensure permissions on the clsfmt.bin binary are correct:
# % chmod 755 $ORACLE_HOME/bin/clsfmt.bin
3. Run the root.sh script and proceed with the installation.
**My question is still i am not install Database ..only i ma trying to install crs but in this readme .txt we need to replace the clsfmt.bin file in ORACLE_HOME/bin.**
**but i have not bin directory under in ORACLE_HOME.please clear my doupt to apply this patch...**
Regards,
MugunthAlso you clusterware installation installs to an ORACLE_HOME.
Oracle does only make a differentiation, if it has to be clear, that you got a clusterware home and a database home.
Normally if a patch is referring to $ORACLE_HOME (and the patch can be used for clusterware & database), it just means the installation directory of the oracle software installed.
Sebastian -
Database recovery from the server backup - 10g Oracle with Linux
My server OS is Linux and nightly we are taking a whole logical volumes backup as it is and databses are not shutdown.
so i would like to know how much worth keeping this copy in recovery purposes as it is taking few hours to copy all daily.
If some one can share some points would be appriciated.Hi,
What kind of backup is it please explain, what tool are you using for this logical volume backups? Are you sure that if you logical volume backup starts at 10:00, everything is logically frozen at that point in time and if recovery needed, everything will be restored at exact 10:00? Since oracle database is open on logical volumes, during backup of logical volumes, your database files will not be consistent and hence backup of database is not valid and will not work (unless you have some utility to logical freeze everything during backup to make backup consistent).
I would recommend you to configure the oracle database backup (hot or RMAN) and put backup on a logical volume and configure backup of that logical volume and remove the logical volume from backup list where your database exists. Database backup should finish before backup of logical volume statrts
Salman -
Invoking asmcmd for oracle 10g RAC in LINUX
Hi Experts,
I got below message when I try to Invoking asmcmd.
[root@Sale ~]# su - oracle
[oracle@Sale ~]$ export ORACLE_SID=+ASM
[oracle@Sale ~]$ asmcmd
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory (DBD ERROR: OCISessionBegin)
or
[root@Sale ~]# export ORACLE_SID=+ASM
[root@Sale ~]# asmcmd
-bash: asmcmd: command not found
How to invoke asmcmd?
JIMHi Taj,
Yes. I can saw ASM instance in system by
ps -ef|grep ASM
and
[oracle@SALE bin]$ ps -ef |grep pmon
oracle 16276 1 0 11:51 ? 00:00:00 asm_pmon_+ASM1
I forget to display correcting info.
We set up crs, asm and db in 3 separate home dir.
is it wrong?
Thanks
JIm
Edited by: user589812 on Jul 16, 2009 12:41 PM
Edited by: user589812 on Jul 16, 2009 1:00 PM -
Having problems in ocfs2 while installing oracle 10g rac on linux as 4
this is the frist time i am try to install oracle rac based on three PCs after installing ocfs2 when i try to configure nodes through console i see the following msg "Could not start cluster stack .this must be resolved before any OCFS2 file system can be mounted "
Please check the user guide
http://oss.oracle.com/projects/ocfs2/dist/documentation/01-cluster_start_stop.pdf
Regards
Jason -
Oracle 10g RAC with ASM upgrade RHEL3 to RHEL4
Has anyone acheived this or know of any documentation highlighting any pitfalls ?
Hi.
If you are using raw devices for ASM, I would not expect there to be a problem. I would have thought all you have to do is:
- Stop Oracle from starting automatically on reboot.
- Reboot the server and upgrade the OS.
- Make sure all the prerequisites for the new OS are meet (check the isntall guide).
- Startup Oracle.
Note. It may be wise to do a "$ORACLE_HOME/bin/relink all" to make sure.
If you are using ASMLib with ASM, then you will also need to upgrade your ASMLib software, as this is kernel version specific.
Of course, I've never had to do this, so don't take my word for it :) Maybe an SR on Metalink is in order.
Cheers
Tim... -
Failure at final check of Oracle CRS stack.AIX oracle 10g RAC with GPFS
HI ,I install oracle 10R2 RAC using GPFS,os is AIX 6.1,but when I installed CRS,at executing the second root.sh ,I am in trouble ,the error information as follow :
Failure at final check of Oracle CRS stack.
10
I look up the log file the information :
The OCR location /data_gpfs/CRS/ocr_disk2 is inaccessible. Details in /orac
leapp/product/10.2.0/crs/log/p615a/client/ocrconfig_6881286.log.
the ocrconfig_6881286.log.information:
2014-01-24 01:32:20.361: [ OCRCONF][1]ocrconfig starts...
2014-01-24 01:32:20.389: [ OCRCONF][1]Upgrading OCR data
2014-01-24 01:32:20.391: [ OCROSD][1]utread:3: problem reading buffer 100f21d0 buflen 512 retval 0 phy_offset 102400 retry 0
2014-01-24 01:32:20.391: [ OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
2014-01-24 01:32:20.391: [ OCROSD][1]utread:3: problem reading buffer 100f21d0 buflen 512 retval 0 phy_offset 102400 retry 0
2014-01-24 01:32:20.391: [ OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
2014-01-24 01:32:20.391: [ OCROSD][1]utread:3: problem reading buffer ffffb1d0 buflen 4096 retval 0 phy_offset 102400 retry 0
2014-01-24 01:32:20.392: [ OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
2014-01-24 01:32:20.392: [ OCRRAW][1]propriogid:1: INVALID FORMAT
2014-01-24 01:32:20.392: [ OCROSD][1]utread:3: problem reading buffer ffffb1d0 buflen 4096 retval 0 phy_offset 102400 retry 0
2014-01-24 01:32:20.392: [ OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
2014-01-24 01:32:20.392: [ OCRRAW][1]propriogid:1: INVALID FORMAT
2014-01-24 01:32:20.392: [ OCRRAW][1]proprioini: both disks are not OCR formatted
2014-01-24 01:32:20.392: [ OCRRAW][1]proprinit: Could not open raw device
2014-01-24 01:32:20.392: [ default][1]a_init:7!: Backend init unsuccessful : [26]
2014-01-24 01:32:20.393: [ OCRCONF][1]Exporting OCR data to [OCRUPGRADEFILE]
2014-01-24 01:32:20.393: [ OCRAPI][1]a_init:7!: Backend init unsuccessful : [33]
propriogid:1: INVALID FORMAT
2014-01-24 01:32:20.516: [ OCRRAW][1]propriowv: Vote information on disk 0 [/data_gpfs/CRS/ocr_disk1] is adjusted from [0/0] to [1/2]
2014-01-24 01:32:20.527: [ OCRRAW][1]propriowv: Vote information on disk 1 [/data_gpfs/CRS/ocr_disk2] is adjusted from [0/0] to [1/2]
2014-01-24 01:32:20.960: [ OCRRAW][1]propriniconfig:No 92 configuration
2014-01-24 01:32:20.960: [ OCRAPI][1]a_init:6a: Backend init successful
2014-01-24 01:32:21.191: [ OCRCONF][1]Initialized DATABASE keys in OCR
2014-01-24 01:32:21.349: [ OCRCONF][1]Successfully set skgfr block 0
2014-01-24 01:32:21.351: [ OCRCONF][1]Exiting [status=success]...
I dont know what cause this error,i am really trouble,who can help me !!!HI ,I install oracle 10R2 RAC using GPFS,os is AIX 6.1,but when I installed CRS,at executing the second root.sh ,I am in trouble ,the error information as follow :
Failure at final check of Oracle CRS stack.
10
I look up the log file the information :
The OCR location /data_gpfs/CRS/ocr_disk2 is inaccessible. Details in /orac
leapp/product/10.2.0/crs/log/p615a/client/ocrconfig_6881286.log.
the ocrconfig_6881286.log.information:
2014-01-24 01:32:20.361: [ OCRCONF][1]ocrconfig starts...
2014-01-24 01:32:20.389: [ OCRCONF][1]Upgrading OCR data
2014-01-24 01:32:20.391: [ OCROSD][1]utread:3: problem reading buffer 100f21d0 buflen 512 retval 0 phy_offset 102400 retry 0
2014-01-24 01:32:20.391: [ OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
2014-01-24 01:32:20.391: [ OCROSD][1]utread:3: problem reading buffer 100f21d0 buflen 512 retval 0 phy_offset 102400 retry 0
2014-01-24 01:32:20.391: [ OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
2014-01-24 01:32:20.391: [ OCROSD][1]utread:3: problem reading buffer ffffb1d0 buflen 4096 retval 0 phy_offset 102400 retry 0
2014-01-24 01:32:20.392: [ OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
2014-01-24 01:32:20.392: [ OCRRAW][1]propriogid:1: INVALID FORMAT
2014-01-24 01:32:20.392: [ OCROSD][1]utread:3: problem reading buffer ffffb1d0 buflen 4096 retval 0 phy_offset 102400 retry 0
2014-01-24 01:32:20.392: [ OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
2014-01-24 01:32:20.392: [ OCRRAW][1]propriogid:1: INVALID FORMAT
2014-01-24 01:32:20.392: [ OCRRAW][1]proprioini: both disks are not OCR formatted
2014-01-24 01:32:20.392: [ OCRRAW][1]proprinit: Could not open raw device
2014-01-24 01:32:20.392: [ default][1]a_init:7!: Backend init unsuccessful : [26]
2014-01-24 01:32:20.393: [ OCRCONF][1]Exporting OCR data to [OCRUPGRADEFILE]
2014-01-24 01:32:20.393: [ OCRAPI][1]a_init:7!: Backend init unsuccessful : [33]
propriogid:1: INVALID FORMAT
2014-01-24 01:32:20.516: [ OCRRAW][1]propriowv: Vote information on disk 0 [/data_gpfs/CRS/ocr_disk1] is adjusted from [0/0] to [1/2]
2014-01-24 01:32:20.527: [ OCRRAW][1]propriowv: Vote information on disk 1 [/data_gpfs/CRS/ocr_disk2] is adjusted from [0/0] to [1/2]
2014-01-24 01:32:20.960: [ OCRRAW][1]propriniconfig:No 92 configuration
2014-01-24 01:32:20.960: [ OCRAPI][1]a_init:6a: Backend init successful
2014-01-24 01:32:21.191: [ OCRCONF][1]Initialized DATABASE keys in OCR
2014-01-24 01:32:21.349: [ OCRCONF][1]Successfully set skgfr block 0
2014-01-24 01:32:21.351: [ OCRCONF][1]Exiting [status=success]...
I dont know what cause this error,i am really trouble,who can help me !!! -
10g RAC on SLES 9 with Firewire drive
Hello,
Is there documents/guides to setting up 10g RAC with firewire drive on SLES 9. Thank you.Mike:
Yes! I resolved the problem by applying the 9.2.0.3 patch. However, ocfs is not working properly. Sometime I got I/O problem or used one node to create tablespace but the other node can not see it right away. May be is because I use version 1.0 of ocfs.o. I am trying to find newer version of ocfs.o. If you know where to get it please let me know. -
Linux Cluster File System partitions for 10g RAC
Hi Friends,
I planned to install 2 Node Oracle 10g RAC on RHEL and I planned to use Linux File system itself for OCR,Voting Disk and datafiles (no OCFS2/RAW/ASM)
I am having SAN storage.
I would like to know how do i create shared/cluster partitions for OCR,Voting Disk and Datafiles (common storage on SAN).
Do i need to install any Linux cluster file system for creating these shared partitions (as we have sun cluster in solaris)?
If so let me know what versions are supported and provide the necessary Note / Link
Regards,
DBHi ,
Below link may be useful to you:
ORACLE-BASE - Oracle 10g RAC On Linux Using NFS
Maybe you are looking for
-
Facebook and whatsapp problem lumia 630
I can't get notifications from Facebook and WhatsApp when my 3g data on. In 2g connection its working what's the problem in my 3g connections
-
Using a DaqBook/200 with LabVIEW "Driver set up"
Ok here's another round of dumb a*& questions. I'm using a DaqBook/200 with DaqX software version 7.12.10 "latest and greatest except for the differential bug" I used their Daq* Configure Utility to set my DaqBook up. I created the following: Device
-
1080i25p - any known problems in FCP 5 or 6?
Hey all, I'm going to be shooting 1080i25p on a Panasonic HPX171E. The project should finish up by being projected or shown on a monitor/ TV playing from a Blu-ray HD dvd. Can anyone tell me if there are any known problems or difficulties editing 108
-
Why Elements 11 Alias in folder?
I sucessfully (apparently) downloaded Elements 11 and Elements Premier from a purchased disc. BUT, in my apllications folder, within the Elements 11 folder, I have an Elements 11 ALIAS (which does not open) and a folder named 'Support Files' in which
-
Delete a Transaction Code?
Hi Guys, I am havinf 2 Tr codes for a Program.I need to Delete the Old Transaction code.I deleted the Old Transaction code in SE 80 ,But what's the problem is i was able to see the old Tr code in the SE09 Request Number's and Even in SE80