10g Releae 1 move from J-Initiator to JRE

Hello everyone,
Hope you folks can help me out on this problem.
We are using 10g release 1 - Version 9.0.4
It's installed on unix solaris.
The end users access the application through Internet explorer 6 and J-Initiator and webutil. Currently the operating system is XP
The gods have decided to move all the end users to Vista OS. Now this is the problem.
10g R1 is desupported and we should upgrade - Try telling the Gods that!
Also as far as I am aware, Vista is not certified with 10g R1, which is another reason to upgrade but not so easy...
I have thought about raising a Metalink but that will probably be a waste of time...
Anyway, Firstly I need to get JRE to work. The Vista version that I have been given to play with contains JRE 1.6
I modified formsweb.cfg as per other threads to pick up JRE which it does do. However the forms keep crashing at one field all the time. The error message is forms session <38> aborted. Unable to communicate with runtime processes.
Can you help to troubleshoot?
Let me know what information I should provide

user11244736 wrote:
Hello everyone,
Hope you folks can help me out on this problem.
We are using 10g release 1 - Version 9.0.4
It's installed on unix solaris.
The end users access the application through Internet explorer 6 and J-Initiator and webutil. Currently the operating system is XP
The gods have decided to move all the end users to Vista OS. Now this is the problem.
Anyway, Firstly I need to get JRE to work. The Vista version that I have been given to play with contains JRE 1.6
I modified formsweb.cfg as per other threads to pick up JRE which it does do.
Can you help to troubleshoot?Hi,
First of all
Your server is UNIX Solaris
Form version is 1og Release 1
End User is previously XP and now Vista
What is your JRE Version ? JRE1.6.XX
However the forms keep crashing at one field all the time. The error message is forms session <38> aborted. Unable to communicate with runtime processes.At What point it does happened ?
Is there any issue of webutil ? If yes
Did you configure webutil ?
did you configure default.env
did you set forms_path ?
Hamid

Similar Messages

I exported 10G of movies from Iphoto but did not get new room on my hard drive. Why?

My hard drive is almost full so I exported about 10GB of movies from IPhoto to an external drive. Then I placed them in Trash. However, there was no increase on the hard drive available space after I placed those files in trash. Also, there was no trash in the trash bin. So it appears as if the files are not really being deleted. (They have disappeared from the iphoto events folder.) I also have the same movie clips in IMovie which I did not manipulate. Prior to this event I was trying to delete files from a thumb drive and also had the files disappear but there was no change in available space on that thumb drive. In that case I did the deletion on a PC and when placed back on the Mac computer the deleted space became available.
Why are file deletions not being processed to add space to the hard drive?

I can't help with iPhoto specifically since I don't use it, but just out of curiosity: did/do you empty the trash? Space is not regained until after the trash is actually emptied.
Also, when you export or drag/copy files, normally the files are copied to the new location and the originals still exist. As for space on your hard drive: you need to maintain an absolute minimum of 10 - 15 GB; more is better. If you edit/render/burn video, you need to have at least as much free space on your hard drive as the size of the files in your project if you want the machine to perform satisfactorily.

Data Movement from Oracle 8i to 10g

hi
i want to move data from old system (oracle 8i) to new system (oracle 10g). database architecture for both systems is different. there are 12 tables in old system and 37 tables in new system. i want to use exp and imp utilities. new system in oracle 10g also contains so many records. i want to move data rightly and also want to secure data in oracle 10g. can i use exp and imp for it. if there are some other ways then plz write me. plz also write the precautions and considertaions that i have for using exp and imp.
cheers

Since these are two different architectures, and I understand two different OS' then the only available choice is to use export/import. The number of tables doesn't seem to be problematic.
From your other thread, Re: data movement from 8i to 10g , you stated some concert about sys' objects, don't deal with them, just import your production schema objects.
~ Madrid

How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance

How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance downloading it again, especially because (believe it or not) I added it to my phone because that's precisely where I wanted it!! Any help much appreciated

FYI I had to put this link into firefox to reply - because **** back safari just wouldn't register my clicks to any of the links on the post... Despite reloadeing and even restarting my computer. Totally annoying and a massive pain in the ***.
But in terms of my initial query; thanks for responding. But no, this is NOT the cause of the problem. I have auto sync and sync over wifi activated, but have also selected manually manage music and videos. Plus, all of my music and videos are on my macbook, absolutely all of it, so if it my phone was syncing with my macbook everything would still be on the phone. Life would be peachy if my phone jsut copied everything that was on my macbook, but unfortuantely it keeps deleting tracks for no apparent reason.
Any thoughts greatly welcomed, because at the moment i can only conclude that my iphone is crap.

Upgrading Weblogic server to move from jdeveloper 11.1.1.1.0 to 11.1.1.4.0

Hello, I would need clear direction to what I should do to upgrade my target weblogic server when I move my development environment from jdeveloper 11.1.1.1.0 to 11.1.1.4.0
Initial ADF project was developed with jdeveloper 11.1.1.1.0 and deployed on a WLS 10.3.0
Now we are upgrating the application and we decided to move the project to jdeveloper 11.1.1.1.4
I need help on what I should upgrade on the target WLS server.
How do we move from WLS 10.3.0 to WLS 10.3.4?
Is it a reinstall or a upgrade? How do we upgrade?
And what about just upgrating the ADF run time? Is it the way to go?
At following link we see
http://www.oracle.com/technetwork/developer-tools/adf/downloads/index.html there is a Application development runtime is it the runtime that we install on the server or not?
I am confused if the ADF run time is tied with the WLS version or not, can someone give me a clear description of what is the ADF Runtime and how we upgrade it on the servers? Any Oracle documentation describing this process that I can provide to my server administrators?
At the end what is the best practice to upgrade the WLS servers when you would lilke to move like me from an older version of jdeveloper to a newer version. is there an Oracle document describing the steps to be done?
Thanks

I'll echo Timo's question - why upgrade to 11.1.1.4 and not to the latest and greatest 11.1.1.6 (released yesterday)?
Upgrading to an older version basically means that you are setting yourself for another upgrade later on - so why not enjoy all the bug fixes and new features of the newer versions?
In terms of the upgrade process - if you look in the documentation tab of JDeveloper you'll see the book "Upgrade Guide for Oracle SOA Suite, WebCenter, and ADF" which gives the steps you can follow.
For 11.1.1.6 the book is here:
http://docs.oracle.com/cd/E23943_01/upgrade.1111/e10127/toc.htm
In the same documentation tab you'll find the certification matrix that explains which ADF version works with which WLS version:
http://www.oracle.com/technetwork/developer-tools/jdev/index-091111.html

Rented a movie from Apple tv- itunes it buffers too many time

We just got the apple tv, did updates so there are no apple tv updates to do, I connecting via wirelss home network, We rented a movie from Itunes, started watching the movie and 5 minutes in it started to buffer movie was frozen and spinning apple wheel continued to spin.moments later the movie started up again. around five minutes later the movie froze again and the apple wheel started spinning once more, during the course of the initial 15 minute movie it appeared to be buffering once more, kinda frustrating, Am I doing something wrong or am I not using the technology properly.

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

I am looking for a way to efficiently move from HSRP to GLBP.

I want to move from using HSRP to GLBP and encountering issues with making it a smooth transition. I am testing my plans using GNS3
Our two external production routers are configured to use HSRP and the current traffic demands are taking a toll on the primary router. The primary HSRP router's CPU is running above 70% while the standby router is hovering in the 20's. The main reason is the firewalls are running High Availability Load Sharing (Sidewinders) so each firewall is able to transmit / receive data. Our routers are setup in a BGP multihome configuration with the ISP. The upstream routers are associated with the same AS. Each side has maximum-path 2 enabled within the BGP process. The two firewalls associate a multicast mac address with a vIP. Each router has a static arp entry for the firewall vIP multicast address allowing them to send traffic they receive from the world to the firewall pair. The firewalls then decide if they will accept the traffic or defer to the other. Unfortunately I cannot upgrade the NPE's on the external routers (NPE-400) so the next best thing is to try and distribute the load coming from the two firewalls. I hope to get both routers running in the mid 50’s which aren’t great but it's better than the current situation. I've been told money is coming but you know how that goes.
Here is my glbp scheme I want to implement
R1 (This will be my AVG)
track 20 interface g2/0 line-protocol (Gi2/0 is the external interface)
interface gi0/0 (Serves as the gateway interface for the Firewalls)
glbp 10 ip 10.1.1.1 (fictitious address)
glbp 10 timers 5 15
glbp 10 weighting 100 lower 90 upper 95
glbp 10 load-balancing host-dependent
glbp 10 authentication md5 key-string #######
glbp 10 weighting track 20 decrement 20
glbp 10 forwarder preempt delay minimum 5
R2
track 20 interface g2/0 line-protocol (Gi2/0 is the external interface)
interface gi0/0 (Serves as the gateway interface for the Firewalls)
glbp 10 ip 10.1.1.1 (fictitious address)
glbp 10 timers 5 15
glbp 10 priority 95 (the interface physical ip address on this router is greater than the one on R1)
glbp 10 weighting 100 lower 90 upper 95
glbp 10 load-balancing host-dependent
glbp 10 authentication md5 key-string #######
glbp 10 weighting track 20 decrement 20
glbp 10 forwarder preempt delay minimum 5
Initially I thought this would be simple to transition from HSRP to GLBP. I would remove the standby ip ip-address command from the interface and replace it with the glbp ip ip-address command. The interface would already be configured with the other glbp commands prior to making the change. I thought this method would also aid in the event I had to roll back to HSRP due to something I didn't account for in testing.
When I attempt to execute the above command sequence, the router reports the virtual IP address is being used by another application on the interface. I tried shutting down the interface and rerun the sequence with no success. To get around this obstacle, I remove all standby commands from the interface by entering either no standby 1 or no standby.
So here is what I am thinking. On the day of moving from HSRP to GLBP, I will have a console connection to both routers.
On R2
shutdown interface g0/0 since this router is designated as the HSRP standby router and paste the following commands into the router
track 20 interface g2/0 line-protocol
interface gi0/0
no standby 1
glbp 10 ip ip-address
glbp 10 timers 5 15
glbp 10 priority 95
glbp 10 weighting 100 lower 90 upper 95
glbp 10 load-balancing host-dependent
glbp 10 authentication md5 key-string #######
glbp 10 weighting track 20 decrement 20
glbp 10 forwarder preempt delay minimum 5
While this is occurring, on router #1 which is the primary hsrp router, paste the following commands in
track 20 interface GigabitEthernet2/0 line-protocol
interface GigabitEthernet0/0
no standby 1
glbp 10 ip ip-adddress
glbp 10 timers 5 15
glbp 10 weighting 100 lower 90 upper 95
glbp 10 load-balancing host-dependent
glbp 10 authentication md5 key-string ######
glbp 10 weighting track 20 decrement 20
glbp 10 forwarder preempt delay minimum 5
Once the commands are pasted into Router #1, enable the interface on Router #2 and monitor GLBP with the following debug commands enabled on both routers.
debug glbp events
debug glbp errors
My test runs using GNS seem to run well. I know I am going to interrupt traffic and I scheduled network downtime to perform the change. I am anticipating total downtime to be less than 5 minutes.
Does this approach sound logical or is there a better method to transition from HSRP to GLBP?
thanks in advanced.

p.lagatta wrote:Jon, Thanks for the reply. The Siderwinder Firewalls associate a Multicast MAC address with the vIP. That's the reason for the static ARP entry in each router. Since our Layer II switches located between the firewalls and routers do not register the MAC with a specific port, both firewalls receive the traffic. Once the traffic reaches the firewalls, they pass information across a heartbeat interface and the selection process is based on odd / even ports. Receive traffic is already working in this configuration. Both our external routers are peered with two EBGP routers located in the same AS. The GLBP implementation will allow us to load balance the traffic each firewall is sending to the GW address.
Perhaps i'm misunderstaning.
If there is one mac-address then GLBP will assign that mac-address to one of the routers and it will keep that router for forwarding the traffic with the same mac-address. So the traffic will always be forwarded by the same router. GLBP works by assigning different source mac-addresses to different routers within the same group but it sounds like the source mac-address is always the same from the firewalls.
Jon

No more alpha in exported QuickTime movie from Keynote '09

Hello
In Keynote '08, I create a slide with no background (None).
I add some text with some fancy text IN and OUT features.
I export using the Animation codec and the transparency option.
When I reimport the movie in another Keynote '08 file, it inherits the transparency of the imported file and thus everything is perfectly blended.
In Keynote '09 it is not possible anymore.
Even if I import an exported QuickTime movie from Motion with a transparent background, it is not possible to have a perfect blend, all layers are opaque.
Last but not the least, adding transparent files on top of each other in QuickTime player does not preserve transparency despite the fact that the Animation + transparency features are added in the files.
Thank you in advance.

Hey Gary - first off, thanks for your reply! I am currently forcing spotlight to re-index to see if that might help me out. After that I will try your suggestion and run a system software check.
I need a ProRes export as this is going to be combined with IMAG footage from a live presentation as well as additional video from an Arri Alexa. I want to preserve as much quality as possible so that there isn't a discrepancy in the final edit. Originally, I was rendering a small test to the desktop to gauge output quality of animations etc. I did go ahead and re-export a second time to an external drive, but it doesn't seem to matter as Keynote appears to initially render everything to the startup drive no matter what. The second export still ate about 15 gigs from my startup disk and I am unable to find any sort of temp files anywhere!
I am showing all files in Finder and searching around the ~/private/tmp folders to no avail. In the image below there appears to be a discrepancy in the size being reported by finder and the size I'm seeing listed in terminal...

Do you have to have an internet connection to watch a rented movie from itunes?

I rented a movie from itunes and tried to watch in on a plane. But a message came up that itunes could not connect to the internet. I did not realize you had to have an internet connection to watch a rented movie. Is this correct?

I have experienced this on several occassions and after being unable to watch three of the six movies I rented from iTunes on the return leg of a six hour flight, I finally decided to explore a little more to determine how to "fix" this. I have yet to find a definitive answer but at this point I am 100% certain that you "need" an internet connection to watch a movie. If you have ever downloaded movies on your iPad and tried to BEGIN watching them in flight, imagine your frustration level when the "Content Not Authorized" message appears and you are SOL watching the back of the seat in front of you for six hours. On the initial leg of my West Coast trip, fearing this would happen, I started playing the three movies I might watch on the flight while in the terminal. This of course began the 24 hour countdown. I was rushed on the return leg and neglected to do this. Of course the three remaining movies could not be viewed because the "Content Not Authorized" message appeared. Upon landing however I was prompted to log into iCloud and sure enough the movies could be played.
While an internet connection is not required to view movies once they begin, there is clearly some form of authorization taking place and required before they can be played. If you wait until you are cruising along at 30,000 feet, you are SOL and heaven forbid you are on a New York to Seattle flight in the middle seat of a 737 with no in-seat entertainment. It makes for a very long 6.5 hours.
The abursdity of this is simply beyond my comprehension. Once you download and pay for the movie (transferred from PC), shouldn't the iPad somehow be intelligent enough to know when you started the movie using its own internal clock or something? Isn't the whole purpose of the iPad to enable me to screw off on a 6-hour flight watching movies and avoiding work? The apparent oversight here is simply impossible to understand given how frequently this must occur. Ten years from now every flight while be equipped with WiFi and this issue will be a thing of the past but what an incredible limitation of an amazing piece of technology. I would be willing to bet that if Jobs had ever been screwed out of $15 for three movies because "Content Not Authorized" appeared on his flight I wouldn't be posting this.

Another Apple TV now slow to download movies from iTunes store.

G'Day all there is a lot of conversation from people experiencing poor download speed when renting movies from the apple iTunes store using the Apple TV (ATV) interface but no solutions I can find yet so sorry to bring it up again. I have a Gen 2 ATV on wireless (Apple time capsule modem router) which worked very well up until several months ago but now can take hours to stream a SD movie when before it took minutes. However using the same ATV to view long uTube video's they seem to work fine ie play straight away yes they are smaller over all but still play straight up rather than initial buffer like the movies, the signal strength is high the updates are all done and I've also done resets I can download the same movie to my either of Mac's beside the ATV in minutes then stream it to the ATV and watch on on my TV without a problem and also do it from anywhere else in the house so dont think using a direct network cable will help to far anyway. I am in Australia and have a 12/1mbps fibre optic connection plan and speed tests to anywhere say the same. I am using and have always used the automatic DNS setting however some net topics say changing it may help others indicate dont.

We also are attempting to download an iTunes (TV show in our case) and we also are not able to do so tonight. We've done it a lot in times past and it normally takes seconds to a few minutes at most to be able to start playing the show/movie. But something has been wrong the past couple days (we're still trying to learn what's going on) and we see messages like it's going to take 44 hours and 10 minutes before we can start playing. Obviously, that's not useable. My guess is iTunes is swamped or having some server issues here at the holidays??? We're also seeing some strange, sporadic network issues which we never have here at our home. So that might be complicating the issue.
But the answer to your question is that under normal circumstances and without the system being overwhelmed, it will typically only take a few seconds to maybe a very few minutes before enough of the movie downloads so you can begin watching it. And from that point, you will be able to watch all ther rest of it as it will continue to download while you watch the first part...
bob...

11i Migration to Linux - Using transportable tablespace of 10g to move DB

Hi there,
We are planning to move 11i from HP-UX to Linux. Our Oracle EBS 11i database version is 10g R2. Does anyone know if its possible to use the "Transportable" tablespace feature of 10g to move the entire database to Linux rather than using Export/Import?
Since 10g offers to move the tablespaces across the platforms using its transportable tablespace feature, I just wanted to poll this group to see if anyone has any experience on doing this for Oracle E-Business suite's database.
Thanks,
Ashish

Consider the limitations of Transportable Tablespaces, Objects with underlying objects (such as materialized views) or contained objects (such as partitioned tables) are not transportable unless all of the underlying or contained objects are in the tablespace set.
Most database entities, such as data in a tablespace or structural information associated with the tablespace, behave normally after being transported to a different database but there are some exceptions:
Transporting Tablespaces Between Databases
http://download-west.oracle.com/docs/cd/B13789_01/server.101/b10739/tspaces.htm#i1007233

ITunes 7.0.1(7): Problems Downloading Movies from iTunes Store

Prior to installing the iTunes 7.0.1(7) upgrade, I had no problems downloading movies from the iTunes store. After I noticed that there appeared to be rate-limiting on the inital movie that I purchased, I simultaneously downloaded three other movies and watched one of the movies while they were downloading.
No problems with downloading multiple movies but severe problems with using iTunes 7.0.0 as a viewer. An inadvertent movement or click of the mouse resulted in the video portion of the movie disappearing. To solve the problem, I created symlinks in the QuickTime Player's ~/Movies directory to the downloaded movies. Using QuickTime as a viewer was a significant improvement over iTunes.
Upgraded to iTunes 7.0.1(7) when it was released. Today I discovered that the release has significant problems downloading movies.
After the initial download of the movie to /private/tmp, the iTunes download panel displays a message stating that it is processing the file. One would assume that it is inserting the chapter bookmarks and transferring it to the ~Music/iTunes/iTunes Music/Movies directory.
Not so. Its downloading the movie a second time. The processing file message is displayed a second time followed by a pop-up window reprting that the file is corrupt with an error code of 10008. Looks like one of Window's infamous network error codes. Wonder what it's doing on a Mac?
Enough of my diatribe. Are others seeing this? Do you have a "work around" or solution to the problem?
PowerBook 17, PowerMac G5 Mac OS X (10.4.8) iTunes 7.0.1(7)

I did run Disk Utility after reporting my problems here and to the iTunes Store. The "Check Permissions" scan found two iTunes with the incorrect permissions. As the permissions were correct prior to the upgrade, I presume the executable permission flags were turned on during the upgrade. Repaired the permission problems.
Also, I performed a reboot as was mentioned in a discussion of a slightly different problem. I was able to download one of the movies. The second failed about half-way through the download with a 9006 error.

As far as I know, the iPad cannot presently playback a full length movie from a DVD or any other source. Are there any plans to add such a capability to the iPad in the future?

As far as I know, the iPad cannot presently playback a full length movie from a DVD or any other source. Are there any plans to add such a capability to the iPad in the future?

alvwill wrote:
Phil0124: Sorry, I guess that I may not have communicated clearly initially. The reason that I asked about the DVD reading capability in the first place is that I would like to be able to watch a movie "stand-alone" (like on an airplane) on my iPad without having an internet connection. If VUDU is strickly a streaming service that wouldn't satisfy my needs after all. After looking into the iTunes store offerings, I can see that I can either purchase a movie or rent one from them. Either way, as I understand it, the content would then reside in a file in the iTunes folder in my computer (if rented, this would just be temporarily) and could be viewed on my computer and/or transferred to my iPad for viewing. Considering the legal question, isn't there a copy being made and transferred into my possession. So,what's up with that?
Yes Vudu streams. iTunes does not. If you buy or rent a movie on your computer through the iTunes store, then you are legally entitled to transfer that movie to your digital device as long as that device is under the Same Apple ID used to download it to the computer, and is authorized to view the content. Usually this is the case if your device is synced with iTunes on the computer This is legal and covered by the terms of use of the iTunes store.
If your rent a movie on your computer you can also transfer it to your iPad but it will be removed from the computer as rentals can only exist in one place at a time. When the rental period expires the movie will be automatically removed from your computer or device, wherever it is when the rental period expires.
If you buy a movie on your iPad these can be transferred to your computer using the Transfer Purchases button on iTunes on your computer while the iPad is connected to it. Rentals on iPads or other mobile device cannot be transferred and must be watched in the iPad or device that download them.
All of these methods through the iTunes store download the complete movie to the device or computer, so no internet connection is required for watching at a later date.
Rentals have a 30 day life as long as they haven't begun to be watched. Once the movie has been started then it has a 48 hour expiry period. That is you must finish watching the rented movei within 48 hours of rental as after that it is removed from the device. You can watch it as many times as you want in that period of time though.
iTunes Store: Movie rental frequently asked questions (FAQ)
http://support.apple.com/kb/ht1657
How to rent a movie from the iTunes Store on your computer
http://support.apple.com/kb/HT1390
Purchased movies are yours, and never expire. If you delete the movie from your device or computer it can be re-downloaded at no extra cost provided the Movie is still available in the store.

Black screen movies from Iphone on PC

Since the IOS update I can not watch my homemade movies from Iphone4s on my windows PC. I get a black screen and hear only the sounds of the movie, but don't see the images. On the Iphone 4S I see the movies with the pictures, but not on the computer itself. What can I do to fix this problem?

Hi,
I checked out the contents of : http://support.microsoft.com/kb/310123 , but this doesn't really help much. It recommends rebooting the PC.. which I've already done a lot.
http://support.apple.com/kb/TS1538 was more useful. However, despite reinstalling all the drivers & USB drivers it didn't resolve the issue.
My music & My Documents folder is on a seperate hard disk, so a windows reset is not impossibly difficult. However it's still a pain in the *.
This is the 2nd time I've had to do format my hard disk to resolve this same problem, (last time was about 6 months ago). I suspect the driver has been corrupted by the Apple Updater program.
I suspect the solution is to remove all itunes files, drivers, associated programs and reset all operating files modified to initial install. The last part isn't easy.
What I don't understand is why the error sugests the same driver is already loaded into the memory. I've tried stopping programs loading from start up, etc, etc - still no joy.
Anyways... suppose I'd better get started with the format.
Thanks for your help.
A.

Email does not move from GWAPI to Exchange

NW 6.5 sp4
GW7
GWAPI 4.1 with patch 5
I get email from Exchange into GroupWise fine. Email leaving Groupwise
bound for Exchange fails.
I have watched the message flow and the mail seems to move from PO, to MTA,
to Gateway, and out. The gateway seems to lose the message becasue it never
shows in Exchange..
I can see the message go to the PO:
13:20:52 D59 MTP: File sent: 44FD79B3.PM1 Queue: 4 Size: 3092
Then it goes to the MTA:
13:20:56 D7F RTR: RAVENCORP: 00136e41.PM4: Routing
earth/gwdatav:\grpwise\ravendom\mslocal\gwinprog\4\00136 e41.PM4 (4 kb)
13:20:56 D7F RTR: RAVENCORP: 00136e41.PM4 Priority 4 44FD79B3.B54:86:46400 :
Transfer to Exchange.First Administrative Group
13:20:56 D7F RTR: RAVENCORP: 00136e41.PM4: Message queued:
earth/gwdatav:\grpwise\ravendom\mslocal\mshold\excfb87\4 \00136e41.001
13:20:57 35F Exchange Gateway: Releasing message:
earth/gwdatav:\grpwise\ravendom\mslocal\mshold\excfb87\4 \00136e41.001
13:20:57 35F Exchange Gateway: Message queued:
earth/gwdatav:\grpwise\ravendom\wpgate\API41\wpcsout\exc fb87\4\44fd79b9.PM0
All I see in the API gateway log is:
09-05-06 13:21:22 OK
09-05-06 13:21:22 {GWEREQST:GweFindRequests
09-05-06 13:21:22 {GWEADFOT:GweSelFirstDest
09-05-06 13:21:22 {GWEADFOT:do_sel_dest
09-05-06 13:21:22 }GWEADFOT:do_sel_dest
09-05-06 13:21:22 }GWEADFOT:GweSelFirstDest
09-05-06 13:21:22 }GWEREQST:GweFindRequests
09-05-06 13:21:22 OK
09-05-06 13:21:22 Processing outbound message...
09-05-06 13:21:22 Error getting information from the GroupWise message
09-05-06 13:21:22 Info - No active recipients
09-05-06 13:21:22 {GweBody:GweCloseMsgFile
09-05-06 13:21:22 {GWEADLIB:GweCheckWpMsg
09-05-06 13:21:22 }GWEADLIB:GweCheckWpMsg
09-05-06 13:21:22 {GweBody:GweFindFirstAttachmentField
09-05-06 13:21:22 }GweBody:GweFindFirstAttachmentField
09-05-06 13:21:22 FALSE
09-05-06 13:21:22 }GweBody:GweCloseMsgFile
09-05-06 13:21:22 OK
09-05-06 13:21:22 {GweBody:GweOpenMsgFile
09-05-06 13:21:22 }GweBody:GweOpenMsgFile
09-05-06 13:21:22 No Files
I can watch the file land in the \API41\wpcsout\excfb87\4 directory and then
disappear but I have no idea where it goes?

Made the initial Gateway using ConsoleOne. Once created I used NWADMIN and
followed thru the doc. I basically started at page 116 of the
e23interopmig.doc. We always got stuck at the one tab where it looks for
"Required Parameters". The foreign domain was done as per this doc. If you
look at an older MS doc some of the instructions are somewhat screwy and
never made sense when it came to creating the Foreign domain etc etc. We
concentrated on getting the basic test done of sending mail to these folders
(page 129), once this worked everything fell into place.
D
"Robin Witkop-Staub" <[email protected]> wrote in
message news:[email protected]...
> Did you make all our objects for the migration via NWADMIN?
>
> "Dave" <[email protected]> wrote in message
> news:[email protected]...
>> Do you see the messages hitting the API gateway on the server running the
>> API? I am talking about the actual console screen on the server for the
>> API. For example our API gateway name is Exchange. In the GW client email
>> an account, real or otherwise to dummyuser:Exchange. This will force it
>> thru the API. You should see the files show up as inbound messages and
>> then they will sit in these 2 folders because they have no where to go.
>> Also do you see the messages coming back thru the API at the server? The
>> ones inbound from the Exchange. I am as green as it comes on this so if I
>> am revisiting what you have already checked I apologize.
>>
>> D
>>
>> "Robin Witkop-Staub" <[email protected]> wrote in
>> message news:[email protected]...
>>> We do have the MS guide and followed it - some of it gets vague but we
>>> believe we followed the right path. I got the NWadmin 5.5 snapins and
>>> modified the address format from groupwise to composite. Everything is
>>> so close to working but the GW email just sits "host pending".
>>>
>>> When in the process should the email file land in the
>>> RAVENDOM\WPGATE\API\ATT_OUT and API_OUT. All I can see is it going to
>>> the \API41\wpcsout\excfb87\4 directory? I cant seem to catch anything in
>>> the other directories. And even though the message fails it never goes
>>> to a GWPROB directory either?
>>>
>>> I have checked and the non-groupwise domain has a link to the exchange
>>> gateway.
>>>
>>> I created the objects (non groupwise domain, external post office, and
>>> exchange API41 gateway sp5, in ConsoleOne. I modified the gateway to
>>> change the address formatting and the gateway file paths to show the
>>> volume/dir path instead of map drive letter. is the procedure you used?
>>>
>>> I do not have an MTA for the non groupwise domain but traffic is routing
>>> thru my main MTA so I assume this was OK. Am I suppose to have a
>>> different MTA for the non groupwise one?
>>>
>>>
>>>
>>> "Dave" <[email protected]> wrote in message
>>> news:[email protected]...
>>>> We just went thru this last week. GW7 to a new Exchange 2003
>>>> environment. Have a look on the MS site for "Microsoft Exchange Server
>>>> 2003 Interoperability and Migration Guide. Follow this and you will
>>>> have great success. Having the correct snap-ins with NWADMIN is also
>>>> the key to all of this as I found out last week. One of the first
>>>> things you need to check are the files getting to the
>>>> RAVENDOM\WPGATE\API\ATT_OUT and API_OUT folder. If the body and header
>>>> don't drop into these folders you have a problem.
>>>>
>>>> Dave
>>>>
>>>> "Robin Witkop-Staub" <[email protected]> wrote in
>>>> message news:[email protected]...
>>>>>I verified that it was created an a non-groupwise domain. Then inside
>>>>>that is an external port office where all the exchange accounts are
>>>>>synching to.
>>>>>
>>>>> "Dana Palmer" <[email protected]> wrote in message
>>>>> news:[email protected]...
>>>>>> Robin Witkop-Staub wrote:
>>>>>>> NW 6.5 sp4
>>>>>>> GW7
>>>>>>> GWAPI 4.1 with patch 5
>>>>>>>
>>>>>>> I get email from Exchange into GroupWise fine. Email leaving
>>>>>>> Groupwise bound for Exchange fails.
>>>>>>> I have watched the message flow and the mail seems to move from PO,
>>>>>>> to MTA, to Gateway, and out. The gateway seems to lose the message
>>>>>>> becasue it never shows in Exchange..
>>>>>>>
>>>>>>> I can see the message go to the PO:
>>>>>>>
>>>>>>> 13:20:52 D59 MTP: File sent: 44FD79B3.PM1 Queue: 4 Size: 3092
>>>>>>>
>>>>>>> Then it goes to the MTA:
>>>>>>>
>>>>>>> 13:20:56 D7F RTR: RAVENCORP: 00136e41.PM4: Routing
>>>>>>> earth/gwdatav:\grpwise\ravendom\mslocal\gwinprog\4\00136 e41.PM4 (4
>>>>>>> kb)
>>>>>>>
>>>>>>> 13:20:56 D7F RTR: RAVENCORP: 00136e41.PM4 Priority 4
>>>>>>> 44FD79B3.B54:86:46400 : Transfer to Exchange.First Administrative
>>>>>>> Group
>>>>>>>
>>>>>>> 13:20:56 D7F RTR: RAVENCORP: 00136e41.PM4: Message queued:
>>>>>>> earth/gwdatav:\grpwise\ravendom\mslocal\mshold\excfb87\4 \00136e41.001
>>>>>>>
>>>>>>> 13:20:57 35F Exchange Gateway: Releasing message:
>>>>>>> earth/gwdatav:\grpwise\ravendom\mslocal\mshold\excfb87\4 \00136e41.001
>>>>>>>
>>>>>>> 13:20:57 35F Exchange Gateway: Message queued:
>>>>>>> earth/gwdatav:\grpwise\ravendom\wpgate\API41\wpcsout\exc fb87\4\44fd79b9.PM0
>>>>>>>
>>>>>>> All I see in the API gateway log is:
>>>>>>>
>>>>>>> 09-05-06 13:21:22 OK
>>>>>>>
>>>>>>> 09-05-06 13:21:22 {GWEREQST:GweFindRequests
>>>>>>>
>>>>>>> 09-05-06 13:21:22 {GWEADFOT:GweSelFirstDest
>>>>>>>
>>>>>>> 09-05-06 13:21:22 {GWEADFOT:do_sel_dest
>>>>>>>
>>>>>>> 09-05-06 13:21:22 }GWEADFOT:do_sel_dest
>>>>>>>
>>>>>>> 09-05-06 13:21:22 }GWEADFOT:GweSelFirstDest
>>>>>>>
>>>>>>> 09-05-06 13:21:22 }GWEREQST:GweFindRequests
>>>>>>>
>>>>>>> 09-05-06 13:21:22 OK
>>>>>>>
>>>>>>> 09-05-06 13:21:22 Processing outbound message...
>>>>>>>
>>>>>>> 09-05-06 13:21:22 Error getting information from the GroupWise
>>>>>>> message
>>>>>>>
>>>>>>> 09-05-06 13:21:22 Info - No active recipients
>>>>>>>
>>>>>>> 09-05-06 13:21:22 {GweBody:GweCloseMsgFile
>>>>>>>
>>>>>>> 09-05-06 13:21:22 {GWEADLIB:GweCheckWpMsg
>>>>>>>
>>>>>>> 09-05-06 13:21:22 }GWEADLIB:GweCheckWpMsg
>>>>>>>
>>>>>>> 09-05-06 13:21:22 {GweBody:GweFindFirstAttachmentField
>>>>>>>
>>>>>>> 09-05-06 13:21:22 }GweBody:GweFindFirstAttachmentField
>>>>>>>
>>>>>>> 09-05-06 13:21:22 FALSE
>>>>>>>
>>>>>>> 09-05-06 13:21:22 }GweBody:GweCloseMsgFile
>>>>>>>
>>>>>>> 09-05-06 13:21:22 OK
>>>>>>>
>>>>>>> 09-05-06 13:21:22 {GweBody:GweOpenMsgFile
>>>>>>>
>>>>>>> 09-05-06 13:21:22 }GweBody:GweOpenMsgFile
>>>>>>>
>>>>>>> 09-05-06 13:21:22 No Files
>>>>>>>
>>>>>>> I can watch the file land in the \API41\wpcsout\excfb87\4 directory
>>>>>>> and then disappear but I have no idea where it goes?
>>>>>>>
>>>>>>>
>>>>>> Sounds like the error, "No active Recipients" is causing the issue.
>>>>>> You need to make sure that the domain representing the Exchange
>>>>>> system in GroupWise is a Non-GroupWise domain and not an External
>>>>>> GroupWise domain.
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

10g Releae 1 move from J-Initiator to JRE

Similar Messages

Maybe you are looking for