10g Release 2 (10.1.2.0.0) for Solaris PDF's not found 404

All the PDF links on otn for 10g Release 2 (10.1.2.0.0) for Solaris Operating System (SPARC) are dead http 404.

Issue resolved; thanks.
Cheers, OTN

Similar Messages

  • Oracle Database 10g Release 1(10.1.0.3) for Solaris x86

    I've downloaded this version of oracle to be installed on solaris x86 for version 5.10 but unfortunatly the following error has occurred:
    $ ./runInstaller
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be 5.6, 5.7, 5.8 or 5.9. Actual 5.10
    Failed <<<<
    Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2006-02-15_11-16-32AM/installActions2006-02-15_11-16-32AM.log
    so it is failed to install ...
    please advise,,
    thx alot...

    from metalink:
    General Notes For Oracle Database - Enterprise Edition On
    Solaris Operating System x86:
    Sun Solaris OS 10 Information:
    o Oracle will announce certification of the following database products on the Sun Solaris 10 operating system shortly after it is announced as being generally available by Sun. This is planned for March 2005.
    + Oracle Database 9iR2 (with 9.2.0.4 Patchset) for Sun Solaris SPARC32
    + Oracle Database 9iR2 (with 9.2.0.5 Patchset) for Sun Solaris SPARC64
    + Oracle Database 10gR1 (with 10.1.0.3 Patchset) for Sun Solaris SPARC64
    + Oracle Database 10gR1 (includes 10.1.0.3 Patchset) for Sun Solaris x86
    o When Oracle Database 10gR2 releases on Sun platforms later in 2005, the following releases will be certified on the Sun Solaris 10 operating system:
    + 10gR2 Database for Sun Solaris SPARC64
    + 10gR2 Database for Sun Solaris AMD64
    + 10gR2 Database for Sun Solaris x86
    pasquale rago

  • Announcement Oracle9iAS Portal Patch Release 3.0.9.8.3 For Solaris is now available

    Oracle9iAS Portal Patch Release 3.0.9.8.3 For Solaris is now available for download from metalink. Bugnumber for the patch release is 2131815.
    You must install this patch release over an Oracle9iAS 1.0.2.2 installation of Oracle9iAS Portal. You can install it over either a production installation (3.0.9.8.0) or a patched installation (3.0.9.8.1, 3.0.9.8.2). This patch release is cumulative and it incorporates the changes from the earlier patches (3.0.9.8.1, 3.0.9.8.2). The installation instructions are in README.TXT and RELNOTES.HTM contained in the patch release.
    The patch will be available for other platforms by the end of May.

    I saw this warning in the content area API home page.
    Warning - The Content Area APIs available in 3.0.8.x and 3.0.9.x will not work with Oracle9iAS Portal 9.0.2. They are not available with this release
    Will there be other API's?
    Are you removing the concept of loading an item through APIs?
    Thanks in advance
    Harish

  • While running dcdiag /test:dns getting Warning: The AAAA record for this DC was not found

    DCDIAG /test:dns result is pested here.
    C:\Users\administrator.SUD>dcdiag /test:dns
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = MUM-ADS-01
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\MUM-ADS-01
          Starting test: Connectivity
             ......................... MUM-ADS-01 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\MUM-ADS-01
          Starting test: DNS
             DNS Tests are running and not hung. Please wait a few minutes...
             ......................... MUM-ADS-01 passed test DNS
       Running partition tests on : ForestDnsZones
       Running partition tests on : DomainDnsZones
       Running partition tests on : Schema
       Running partition tests on : Configuration
       Running partition tests on : sud
       Running enterprise tests on : sud.in
          Starting test: DNS
             Test results for domain controllers:
                DC: MUM-ADS-01.sud.in
                Domain: sud.in
                   TEST: Basic (Basc)
                      Warning: The AAAA record for this DC was not found
                   TEST: Forwarders/Root hints (Forw)
                      Error: Root hints list has invalid root hint server:
                      a.root-servers.net. (198.41.0.4)
                      Error: Root hints list has invalid root hint server:
                      b.root-servers.net. (128.9.0.107)
                      Error: Root hints list has invalid root hint server:
                      c.root-servers.net. (192.33.4.12)
                      Error: Root hints list has invalid root hint server:
                      d.root-servers.net. (128.8.10.90)
                      Error: Root hints list has invalid root hint server:
                      e.root-servers.net. (192.203.230.10)
                      Error: Root hints list has invalid root hint server:
                      f.root-servers.net. (192.5.5.241)
                      Error: Root hints list has invalid root hint server:
                      g.root-servers.net. (192.112.36.4)
                      Error: Root hints list has invalid root hint server:
                      h.root-servers.net. (128.63.2.53)
                      Error: Root hints list has invalid root hint server:
                      i.root-servers.net. (192.36.148.17)
                      Error: Root hints list has invalid root hint server:
                      j.root-servers.net. (192.58.128.30)
                      Error: Root hints list has invalid root hint server:
                      k.root-servers.net. (193.0.14.129)
                      Error: Root hints list has invalid root hint server:
                      l.root-servers.net. (198.32.64.12)
                      Error: Root hints list has invalid root hint server:
                      m.root-servers.net. (202.12.27.33)
                   TEST: Delegations (Del)
                      Error: DNS server: sud-ad.sud.in. IP:<Unavailable>
                      [Missing glue A record]
                   TEST: Records registration (RReg)
                      Network Adapter
                      [00000006] Intel(R) PRO/1000 MT Network Connection:
                         Warning:
                         Missing AAAA record at DNS server 10.1.6.132:
                         MUM-ADS-01.sud.in
                         Warning:
                         Missing AAAA record at DNS server 10.1.6.132:
                         gc._msdcs.sud.in
                         Warning:
                         Missing AAAA record at DNS server 10.1.6.133:
                         MUM-ADS-01.sud.in
                         Warning:
                         Missing AAAA record at DNS server 10.1.6.133:
                         gc._msdcs.sud.in
                   Warning: Record Registrations not found in some network adapters
             Summary of test results for DNS servers used by the above domain
             controllers:
                DNS server: 128.63.2.53 (h.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 128.63.2.53
                DNS server: 128.8.10.90 (d.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 128.8.10.90
                DNS server: 128.9.0.107 (b.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 128.9.0.107
                DNS server: 192.112.36.4 (g.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 192.112.36.4
                DNS server: 192.203.230.10 (e.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 192.203.230.10
                DNS server: 192.33.4.12 (c.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 192.33.4.12
                DNS server: 192.36.148.17 (i.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 192.36.148.17
                DNS server: 192.5.5.241 (f.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 192.5.5.241
                DNS server: 192.58.128.30 (j.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 192.58.128.30
                DNS server: 193.0.14.129 (k.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 193.0.14.129
                DNS server: 198.32.64.12 (l.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 198.32.64.12
                DNS server: 198.41.0.4 (a.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 198.41.0.4
                DNS server: 202.12.27.33 (m.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 202.12.27.33
             Summary of DNS test results:
    Auth Basc Forw Del  Dyn  RReg Ext
                Domain: sud.in
                   MUM-ADS-01                   PASS WARN FAIL FAIL PASS WARN n/a
             ......................... sud.in failed test DNS

    Hi Meinolf,
    Please find the IP Details as well as DNS test results.
    C:\Users\Administrator.SCI>dcdiag /test:dns
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = MDCDCDNS
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: MDC-Powai\MDCDCDNS
          Starting test: Connectivity
             ......................... MDCDCDNS passed test Connectivity
    Doing primary tests
       Testing server: MDC-Powai\MDCDCDNS
          Starting test: DNS
             DNS Tests are running and not hung. Please wait a few minutes...
     ERROR: NO DNS servers for IPV6 stack was found
             ......................... MDCDCDNS passed test DNS
       Running partition tests on : ForestDnsZones
       Running partition tests on : DomainDnsZones
       Running partition tests on : Schema
       Running partition tests on : Configuration
       Running partition tests on : sci
       Running enterprise tests on : sci.com
          Starting test: DNS
             Test results for domain controllers:
                DC: MDCDCDNS.sci.com
                Domain: sci.com
                   TEST: Basic (Basc)
                      Warning: The AAAA record for this DC was not found
                   TEST: Records registration (RReg)
                      Network Adapter
                      [00000009] Microsoft Virtual Network Switch Adapter:
                         Warning:
                         Missing AAAA record at DNS server 10.64.7.32:
                         MDCDCDNS.sci.com
                         Warning:
                         Missing AAAA record at DNS server 10.64.7.32:
                         gc._msdcs.sci.com
                         Warning:
                         Missing AAAA record at DNS server 10.64.7.35:
                         MDCDCDNS.sci.com
                         Warning:
                         Missing AAAA record at DNS server 10.64.7.35:
                         gc._msdcs.sci.com
                         Warning:
                         Missing AAAA record at DNS server 10.20.33.72:
                         MDCDCDNS.sci.com
                         Warning:
                         Missing AAAA record at DNS server 10.20.33.72:
                         gc._msdcs.sci.com
                         Warning:
                         Missing AAAA record at DNS server 10.20.33.71:
                         MDCDCDNS.sci.com
                         Warning:
                         Missing AAAA record at DNS server 10.20.33.71:
                         gc._msdcs.sci.com
                   Warning: Record Registrations not found in some network adapters
                   MDCDCDNS                     PASS WARN PASS PASS PASS WARN n/a
             ......................... sci.com passed test DNS
    C:\Users\Administrator.SCI>ipconfig /all
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : MDCDCDNS
       Primary Dns Suffix  . . . . . . . : sci.com
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
       DNS Suffix Search List. . . . . . : sci.com
    Ethernet adapter Local Area Connection 7:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : External Internal Virtual Network
       Physical Address. . . . . . . . . : 00-14-4F-CA-83-AC
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       IPv4 Address. . . . . . . . . . . : 10.64.7.32(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 10.64.7.1
       DNS Servers . . . . . . . . . . . : 10.64.7.32
                                           10.64.7.35
                                           10.20.33.72
                                           10.20.33.71
       NetBIOS over Tcpip. . . . . . . . : Disabled
    Ethernet adapter Local Area Connection 6:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : TEAM : Team #1
       Physical Address. . . . . . . . . : 00-14-4F-CA-83-AC
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
       Autoconfiguration IPv4 Address. . : 169.254.105.163(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.0.0
       Default Gateway . . . . . . . . . :
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Tunnel adapter Local Area Connection* 8:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : isatap.{2D5A4A27-298F-48E5-A376-EA886EF1E
    42A}
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Local Area Connection* 9:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : isatap.{14FA7CD4-8B69-4C86-A58B-056793B7D
    901}
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Please check and revert back for any queries..
    Thanks...
    Deva Self-trust is the first secret of success.

  • Path in Classpath for file SapMetamodelWebdynproContent.zip not found.

    How to get rid of these warnings?
                   [Warning]: Path in Classpath for file SapMetamodelWebdynproContent.zip not found.          
    Warning               [Warning]: Version for file SapMetamodelWebdynproContent.zip not found.          
    Warning               [Warning]: Versions of 'SapDictionaryTypeServices.jar' have different prefix.          
    Warning               [Warning]: Versions of 'SapDictionaryTypesRuntime.jar' have different prefix.     
    thanks in advance.

    Hi,
    This is a common problem when you import projects to NWDS. Do like this.
    1.Change to Navigator tab in NWDS and delete gen_wdp folder.
    2.Switch to Web Dynpro Explorer. Select the Project -> Right click-> Select properties -> in the wizard select Java Build Path -> Select Libraries tab -> You will find jar files with warnings
    3.Remove the jar and add the jar file with same name to the project one by one.
    4.For each jar file repeat step 3.
    5.Save the project
    Or
    removed the read-only property from all folders / files of the project and it solved my problem.
    Hope this helps!!
    Thanks & Regards
    Vijay K

  • A valid provisioning profile for this executable was not found

    I have built an enterprise APP. It has been installed in hundreds of machine. It can run smoothly at the begining. After two months, a few of the machice cannot open the APP anymore. I have tried to read its crach log and it has nothing. Finally, i found out the reason by tracing the console log.
    The error is "A valid provisioning profile for this executable was not found".
    So I check if the file exist but it is disappeared. The user have not removed the profile.
    At last, I tried to install the profile again, it is still not working even the profile is installed. Is there anyone who have the same issue? Thank you very much
    Message was edited by: Ben125

    Sorry that I have made a mistake. A wrong profile is installed.
    Thanks

  • "Settings for material number conversion not found" occurs when ...

    After I run an initial load data into the InfoCube 0PUR_C01, I want to check the InfoCube Content by the following path:
    RSA1 -> pick up the InfoCube 0PUR_C01, right click it and select Manage -> Get to Content tab -> Click InfoCube Content button -> Deselect all selection, only tick the 1st column checkbox next to 0Material, then hit enter, get a small window titled as "Cancel" with a red STOP msg sysing "Settings for material number conversion not found" with an "Exit" button and a question mark button, click Exit button leads to SAP Easy Access screen, if clicking the question mark button, another window pops up with the msg showed above, click Technical Information button causes the original window short dump and the short dump msg shows below in between two dashed lines:
    Runtime Errors         RPERF_ILLEGAL_STATEMENT
    Date and Time          11/28/2005 14:43:13
    ShrtText
        Statement "CALL SCREEN" is not allowed in this form.
    What happened?
        Error in ABAP application program.
        The current ABAP program "SAPLSHL2" had to be terminated because on
        statements could not be executed.
        This is probably due to an error in the ABAP program.
    Error analysis
        There is probably an error in the program
        "SAPLSHL2".
        The program was probably called in a conversion exit
        or in a field exit. These are implemented by
        function modules called CONVERSION_EXIT_xxxxx_INPUT/OUTPUT or
        USER_EXIT_xxxxx_INPUT.
        Conversion exits are triggered during screen field transports or
        WRITE statements, field exits during field transports from the
        screen to the ABAP/4 program.
        In this connection, the following ABAP/4 statements are not allowed:
        -  CALL SCREEN
        -  CALL DIALOG
        -  CALL TRANSACTION
        -  SUBMIT
        -  MESSAGE W... and MESSAGE I...
        -  COMMIT WORK, ROLLBACK WORK
        -  COMMUNICATION RECEIVE
        -  STOP
        -  REJECT
        -  EXIT FROM STEP-LOOP
        Moreover, conversion exits for output conversion
        (implemented by function modules called
        CONVERSION_EXIT_xxxxx_OUTPUT) do not allow
        -  MESSAGE E...
        to be used.
    Trigger Location of Runtime Error
    Program                                 SAPLSHL2
    Include                                 LSHL2F19
    Row                                     3
    Module type                             (FORM)
    Module Name                             TECHNISCHE_INFO5
    rce Code Extract
    e  SourceCde
    1 ***INCLUDE LSHL2F19 .
    2 form technische_info5.
    >>   call screen 1900 starting at 5  8.
    4 endform.
    5
    6 &----
    7 *&      Form  SHRINK_VALUES
    8 &----
    9 *       text                                                           *
    10 ----
    11 *  -->  p1        text
    12 *  <--  p2        text
    13 ----
    14 form shrink_values.
    15
    16   loop at dynpselect.
    17     clear checktable.
    18     if dynpvaluetab-lowvalue ne space and dynpvaluetab-lowvalue na '*'.
    19       move 'EQ' to checktable-op.
    20       move dynpvaluetab-lowvalue to checktable-low_value.
    21       append checktable.
    22     endif.
    What could cause the problem by selecting only 0Material when checking the InfoCube 0PUR_C01 content?  What does that mean by this STOP msg "Settings for material number conversion not found"?
    Thanks

    Hi Kevin,
    Set the length of 0MATERIAL and change conversion to alpha:
    Re: Error Installing 0MATERIAL from Business Content
    Best regards,
    Eugene

  • Obligatory transport target for business system SAPR3D not found in System

    HI All ,
    We have installed New PI 7.1 system and stared migrating the interfaces from XI 3.0 to PI 7.1 . in Devlopement system .
    IR object have been successfully deployed but while delopying ID objects got the following error . Obligatory transport target for business system SAPR3D not found in System Landscape Directory.
    When I checked with  business system transport target was not defined ., Please suggest how to go ahead further .
    Thanks ,
    Prakash

    Hi Ravi,
    Please go through below disucssion it is on the same line of your question.
    Transport target for business system not found in System Landscape Director

  • Data Object Assignment for BAPI /SYCLO/CORE_MDW_SESSION1_CRT Not Found! Agentry

    Hi,
    I am facing an issue with Agentry (SMP3.0) startup. I am aware that something wrong happens on Agentry SAP Framework but I dont know how to fix it. Please help me. Thank you.
    18:56:11  - Data Object Assignment for BAPI /SYCLO/CORE_MDW_SESSION1_CRT Not Found! |
    2014 06 11 12:56:03#+0700#INFO#System.out##anonymous#Agentry Runtime Worker Thread###User::rethrowException::begin |
    2014 06 11 12:56:03#+0700#INFO#System.out##anonymous#Agentry Runtime Worker Thread###User::rethrowException::Exception caught: 11.06.2014 18:56:11  - Data Object Assignment for BAPI /SYCLO/CORE_MDW_SESSION1_CRT Not Found! |
    2014 06 11 12:56:03#+0700#INFO#System.out##anonymous#Agentry Runtime Worker Thread### |
    2014 06 11 12:56:03#+0700#INFO#System.out##anonymous#Agentry Runtime Worker Thread###User::rethrowException::COM.SYCLO.AGENTRY.AGENTRYEXCEPTION: 11.06.2014 18:56:11  - DATA OBJECT ASSIGNMENT FOR BAPI /SYCLO/CORE_MDW_SESSION1_CRT NOT FOUND! |
    2014 06 11 12:56:03#+0700#INFO#System.out##anonymous#Agentry Runtime Worker Thread### |
    2014 06 11 12:56:03#+0700#INFO#System.out##anonymous#Agentry Runtime Worker Thread### AT COM.SYCLO.SAP.BAPI.BAPIERRORHANDLER.INIT(BAPIERRORHANDLER.JAVA:68) |
    2014 06 11 12:56:03#+0700#INFO#System.out##anonymous#Agentry Runtime Worker Thread### AT COM.SYCLO.SAP.BAPI.BAPIERRORHANDLER.<INIT>(BAPIERRORHANDLER.JAVA:42) |
    2014 06 11 12:56:03#+0700#INFO#System.out##anonymous#Agentry Runtime Worker Thread### AT COM.SYCLO.SAP.BAPI.BAPI.CHECKFORERRORS(BAPI.JAVA:304) |
    2014 06 11 12:56:03#+0700#INFO#System.out##anonymous#Agentry Runtime Worker Thread### AT COM.SYCLO.SAP.BAPI.BAPI.RUN(BAPI.JAVA:184) |
    2014 06 11 12:56:03#+0700#INFO#System.out##anonymous#Agentry Runtime Worker Thread### AT COM.SYCLO.SAP.SESSIONMANAGER.CREATEREMOTEUSER(SESSIONMANAGER.JAVA:95) |
    2014 06 11 12:56:03#+0700#INFO#System.out##anonymous#Agentry Runtime Worker Thread### AT COM.SYCLO.SAP.SESSIONMANAGER.OPENSESSION(SESSIONMANAGER.JAVA:67) |
    2014 06 11 12:56:03#+0700#INFO#System.out##anonymous#Agentry Runtime Worker Thread### AT COM.SYCLO.SAP.USER.INITSESSION(USER.JAVA:693) |
    2014 06 11 12:56:03#+0700#INFO#System.out##anonymous#Agentry Runtime Worker Thread### AT COM.SYCLO.SAP.SERVER.LOGIN(SERVER.JAVA:310) |
    The same thing happen to /SYCLO/CORE_MDW_SESSION1_DEL
    I access my Agentry SAP Framework and found out that there are 3 MDOs assigned to the BAPI. Then why do they popup such exception.

    Hi Kunal,
    Below is my JavaBE.ini. Please help. Thank you very much.
    [HOST]
    server=be1.vdc.csc.com
    APPNAME=ZCH_MATERIALLIST
    [CLIENT_NUM]
    CLIENT=800
    [SYSTEM_NUM]
    SYSNUM=01
    [LOGON_METHOD]
    ; USER_AUTH if standard UID/Password authentication is used
    ; USER_AUTH_GLOBAL if pooled connections using single UID/Password is used
    ; USER_AUTH_GROUP if UID/Password authentication with SAP Message Server
    ;   (load balancing) is used
    LOGON_METHOD=USER_AUTH
    [GLOBAL_LOGON]
    ; referenced when LOGON_METHOD=USER_AUTH_GLOBAL
    ; uses a pool of connections to the SAP backend all utilizing a single
    ;    UID/password
    UID=
    UPASSWORD=
    SHAREDCONNECTION=0
    GET_PERSONNEL_INFO=
    [SERVICE_LOGON]
    ENABLED=true
    UID=hngu3
    UPASSWORD=xxxxxx
    UPASSWORDENCODED=false
    [GROUP_LOGON]
    ; referenced when LOGON_METHOD=USER_AUTH_GROUP
    ; individual user authentication using an SAP Message Server which distributes
    ; client connections among a "group" of SAP application servers based on load
    ; balancing criteria
    ; host name or IP address of SAP Message Server
    MESSAGE_SERVER=
    GROUP_NAME=
    SYSTEM_ID=
    CLIENT=
    [LANGUAGE]
    LANG=EN
    [LOGGING]
    Level=4
    [REQUIRED_BAPI_WRAPPER]
    com.syclo.sap.bapi.LoginCheckBAPI=/SYCLO/CORE_SUSR_LOGIN_CHECK
    com.syclo.sap.bapi.RemoteUserCreateBAPI=/SYCLO/CORE_MDW_SESSION1_CRT
    com.syclo.sap.bapi.RemoteParameterGetBAPI=/SYCLO/CORE_MDW_PARAMETER_GET
    com.syclo.sap.bapi.SystemInfoBAPI=/SYCLO/CORE_SYSTINFO_GET
    com.syclo.sap.bapi.ChangePasswordBAPI=/SYCLO/CORE_SUSR_CHANGE_PASSWD
    com.syclo.sap.bapi.CTConfirmationBAPI=/SYCLO/CORE_OUTB_MSG_STAT_UPD
    com.syclo.sap.bapi.DTBAPI=/SYCLO/CORE_DT_GET
    com.syclo.sap.bapi.GetEmployeeDataBAPI=/SYCLO/HR_EMPLOYEE_DATA_GET
    com.syclo.sap.bapi.GetUserDetailBAPI=/SYCLO/CORE_USER_GET_DETAIL
    com.syclo.sap.bapi.GetUserProfileDataBAPI=/SYCLO/CORE_USER_PROFILE_GET
    com.syclo.sap.bapi.PushStatusUpdateBAPI=/SYCLO/CORE_PUSH_STAT_UPD
    com.syclo.sap.bapi.RemoteObjectCreateBAPI=/SYCLO/CORE_MDW_USR_OBJ_CRT
    com.syclo.sap.bapi.RemoteObjectDeleteBAPI=/SYCLO/CORE_MDW_USR_OBJ_DEL
    com.syclo.sap.bapi.RemoteObjectGetBAPI=/SYCLO/CORE_MDW_SESSION_GET
    com.syclo.sap.bapi.RemoteObjectUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
    com.syclo.sap.bapi.RemoteReferenceCreateBAPI=/SYCLO/CORE_MDW_USR_KEYMAP_CRT
    com.syclo.sap.bapi.RemoteReferenceDeleteBAPI=/SYCLO/CORE_MDW_USR_KEYMAP_DEL
    com.syclo.sap.bapi.RemoteReferenceGetBAPI=/SYCLO/CORE_MDW_SESSION_GET
    com.syclo.sap.bapi.RemoteReferenceUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
    com.syclo.sap.bapi.RemoteSessionDeleteBAPI=/SYCLO/CORE_MDW_SESSION1_DEL
    com.syclo.sap.bapi.RemoteUserDeleteBAPI=/SYCLO/CORE_MDW_SESSION1_DEL
    com.syclo.sap.bapi.RemoteUserUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
    com.syclo.sap.bapi.TransactionCommitBAPI=WFD_TRANSACTION_COMMIT
    com.syclo.sap.bapi.SignatureCaptureBAPI=/SYCLO/CS_DOBDSDOCUMENT_CRT

  • Settings for material number conversion not found

    "Settings for material number conversion not found"
    This is the error that came out. I was everytime i try to access the activated business content 0material, the system comes up with this error. Please help me with this! Thank you!
    -Peter

    Hi Peter,
    try oss note 555675, it tells you to use transaction OMSL.
    regards
    Siggi
    Message was edited by: Siegfried Szameitat

  • Script Component WebService Binary code for the script is not found

    I am using SSIS 2012 to access a Public Web Service
     http://marketinformation.natgrid.co.uk/MIPIws-public/public/publicwebservice.asmx
    However, when adding reference to WebService (not Service Reference),
    I receive the dreaded msg "Binary code for the script is not found"
    I have spent an age ploughing through the forums.
    Many replies seem to suggest not using Script Component to acces WebService.
    Should I write a .NET app  ?
    Any thoughts how I should proceed would be most welcome.
    thanks JohnJames

    Hi JohnJames,
    If I understand correctly, you already add this public web service via Add Service Reference option in the Script Component. Then you receive the error message when you trying to call the bindings and Contract settings stored in app.config file to access
    the web service.
    Please note that we cannot all the web service normal way as SSIS Script Component task doesn’t recongnise the app.config file. To fix this issue, we should define the BINDINGS via code rather than depending on the App.config file. For more details, please
    see the following blog:
    http://social.technet.microsoft.com/wiki/contents/articles/22587.consume-webservice-via-ssis-script-component.aspx
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • The binary code for the script is not found error for the Script component - SSIS 2012

    Hi,
    I'm implementing a SSIS 2012 pkg. For a data flow task, I'm using a Visual Basic 2010 script component with an Oracle input flow. For the script component I've an input column and I've created an output column. Inside the script code I've edited only inside
    Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer).
    The written code is:
    If Year(Row.OFFDATAORI) < 1900 Then
    Row.OFFDATAORIconv = CDate(CStr("1900" + "-" + Right("00" + CStr(Month(Row.OFFDATAORI)), 2) + "-" + Right("00" + CStr(DatePart(DateInterval.Day, Row.OFFDATAORI)), 2))
    Else : Row.OFFDATAORIconv = Row.OFFDATAORI
    End If
    It is to note that OFFDATAORI isn't the name of the input column for the script component.
    When I close the script component I've an error about "The binary code for the script is not found".
    Any helps to me, please?
    Thanks

    Hi,
    I've solved. There was a syntax error, a bit hidden.
    Bye

  • AD DS Config problem (The AAAA record for this DC was not found) Cannot connect to ADUC

    I am trying to figure out what is wrong with my AD DS Config. I ran dcdiag. The results were:
    C:\Users\Administrator>dcdiag /test:dns
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = R210_1_2K12
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\R210_1_2K12
          Starting test: Connectivity
             ......................... R210_1_2K12 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\R210_1_2K12
          Starting test: DNS
             DNS Tests are running and not hung. Please wait a few minutes...
             ......................... R210_1_2K12 passed test DNS
       Running partition tests on : Schema
       Running partition tests on : Configuration
       Running partition tests on : bcas-tbf
       Running enterprise tests on : bcas-tbf.local
          Starting test: DNS
             Test results for domain controllers:
                DC: R210_1_2K12.bcas-tbf.local
                Domain: bcas-tbf.local
                   TEST: Basic (Basc)
                      Warning: The AAAA record for this DC was not found
                   TEST: Records registration (RReg)
                      Network Adapter [00000017] Hyper-V Virtual Ethernet Adapter:
                         Warning:
                         Missing AAAA record at DNS server 172.16.0.202:
                         R210_1_2K12.bcas-tbf.local
                         Warning:
                         Missing AAAA record at DNS server 172.16.0.202:
                         gc._msdcs.bcas-tbf.local
                         Warning:
                         Missing AAAA record at DNS server ::1:
                         R210_1_2K12.bcas-tbf.local
                         Warning:
                         Missing AAAA record at DNS server ::1:
                         gc._msdcs.bcas-tbf.local
                   Warning: Record Registrations not found in some network adapters
                   R210_1_2K12                  PASS WARN PASS PASS PASS WARN n/a
             ......................... bcas-tbf.local passed test DNS
    IPCONFIG info:
    C:\Users\Administrator>ipconfig /all
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : R210_1_2K12
       Primary Dns Suffix  . . . . . . . : bcas-tbf.local
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
       DNS Suffix Search List. . . . . . : bcas-tbf.local
    Ethernet adapter vEthernet (Broadcom BCM5716C NetXtreme II GigE (NDIS VBD Client
    ) #36 - Virtual Switch):
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Hyper-V Virtual Ethernet Adapter #2
       Physical Address. . . . . . . . . : 00-26-B9-7E-81-74
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       Link-local IPv6 Address . . . . . : fe80::bda9:1a28:974a:5fc3%19(Preferred)
       IPv4 Address. . . . . . . . . . . : 172.16.0.202(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 172.16.0.1
       DHCPv6 IAID . . . . . . . . . . . : 335554233
       DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-0A-52-45-00-26-B9-7E-81-75
       DNS Servers . . . . . . . . . . . : ::1
                                           172.16.0.202
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Tunnel adapter isatap.{AE70C63E-0A8A-4461-A789-8E4CD99CEA46}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Local Area Connection* 11:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       IPv6 Address. . . . . . . . . . . : 2001:0:9d38:90d7:1cf5:1d4f:53ef:ff35(Pref
    erred)
       Link-local IPv6 Address . . . . . : fe80::1cf5:1d4f:53ef:ff35%15(Preferred)
       Default Gateway . . . . . . . . . : ::
       NetBIOS over Tcpip. . . . . . . . : Disabled
    I'm unsure of what the problem is or what to do next.  Thank You.

    Disable IPv6 according to Pauls blog:
    Disabling
    IPv6 on Windows 2008
    After disabling run:
    ipconfig /flushdns
    ipconfig /registerdns
    restart the netlogon service or reboot.
    For co-existence from IPv4 and IPv6 see: 
    Configuring DNS for IPv6/IPv4
    Coexistence
    IPv6
    for the Windows Administrator: How Name Resolution Works in a Dual IPv4/IPv6 Scenario
    IPv6 for the Windows Administrator: IPv6 Fundamentals
    Hopefully, that fixes your issue.  Added some links to read in cause you want to.
    If it answered your question, remember to “Mark as Answer”.
    If you found this post helpful, please “Vote as Helpful”.
    Postings are provided “AS IS” with no warranties, and confers no rights.
    Active Directory: Ultimate Reading Collection

  • Will OWB 10g Release 2 (10.2.0.3) for Vista 32bit work 100% on XP Pro

    All,
    I have a problem with installing Oracle Warehouse Builder 10g Release 2 (10.2.0.1), after the install i cannot run the design center. So I removed this software and installed the newest version (see title). But there is "Vista 32bit" in the download title. Now I installed this and it seems to be working but I don't want to see my future work become invalid after a while. I can't find in the documentation anything about this new version working on XP.
    Anyone who can help me out pls.

    Tash wrote:
    It is not that I wnat Vista version but I couldn't get 10..2.0.3 XP version. If there is this version available for XP, I don't want vista but if it;s not available I am wondering if vista version works on XP like other softwares which latest alys works on previous version OS.Not in oracle. For oracle, you should use the correct version for the right o/s only.
    Thank you for info. Can I get a XP version of 10.2.0.3 without having to patch from previous version?AFAIK, I don't think its possible. You have to install 10201 and than apply the patch to it to make it 10203.
    HTH
    Aman....

  • Oracle JHeadstart 10g (release 9.0.5.1) available for evaluation purposes

    Hi,
    Oracle JHeadstart 10g (release 9.0.5.1) is now available for evaluation purposes please go to the JHeadstart Product Center and download the software.
    http://otn.oracle.com/consulting/9iServices/jheadstart.html
    Happy JHeadstarting!
    Regards,
    Ton

    We already purchased the Jheadstart supplement option, but our Oracle Consulting sales contact didn't have walked us through the registration process in before. I had contact them and ask them to assist us, but they need some work days. so could you help me to download JHeadstart 10g release 9.0.5.1 as soon as possible. our project schedule need this released version in hurry.If you can help me please give me a notice, thanks a lot.
    my email address:[email protected]

Maybe you are looking for

  • How to delete Windows 8.1 Recovery Partition

    No, if I create a USB recovery pen on this system IT DOESN'T SHOW ME AN OPTION TO REMOVE THE ORIGINAL RECOVERY PARTITION. I had to go throgh EASEUS Partition Master to delete recovery and extend drive C and after that couldn't boot as usual. Had to u

  • Can I connect iPhone with PC withouten any problem?

    Is connection with USB cable of my iPhone 4s with my PC & Windows NT possible without any problem or do I have to install a programm on my PC

  • Need SQL query to get the result.

    Region Month Trx Type Resolution Summary AMERICAS May-13 Adjustments Correct EMEA May-13 Adjustments Incorrect AMERICAS May-13 Credit Memo Incorrect EMEA May-13 Invoice Correct AMERICAS May-13 Credit Memo Correct OFD May-13 Adjustments Correct AMERIC

  • Need help with matrix report

    Hi all... I am having a problem with one of my report. I have a report of a tabular style...just a simple one. It has about 15 column heads like employeeID, employeename, salary , allowance, provident fund and so on. What I need to do is to insert a

  • Apps needing access to Contacts are not showing in the Privacy pane of security

    I have apps like cobook and Alfred that need access to Contacts but they are not showing in the Privacy pane of the Security & Privacy System Preferences.