10g single node install

How best to slice disk drives? Single Node install on a Sun V480 (2 cpu's @ 900mhz, 2 disk drives @ 36gb each), solaris operating system. For my test server I will install all 10g components. How best to distribute the 10g load (oraInventory, appserver, infrastructure, Metadata Repository) between the two disk drives?

Part of the installation involves the installer installing CRS software on the other nodes, creating the ASM and RAC instances and so on.
All this is done in an automated fashion - requiring each node to be prepped accordingly, ssh keys generated, public keys distributed and added to authorised keys and so on.
None of these installation steps (all critical) will be part of a "single node" RAC install.
In fact, the prepping part is even more critical and complex than the actual installation - if done properly the installation will be smooth and painless. If not... you will run into all kinds of problems. And this is often the case as one has to deal with getting the shared devices to be seen by all nodes, ensure consistent device mappings across all nodes, ensure that multipath (load balancing) I/O works, etc.
For this at least 2 nodes are required. For actual proper RAC testing itself, even 2 nodes do not suffice and at least 3 are needed.
IMO you are pretty much wasting your time as no real practical RAC installation lessons will be learned mucking about with RAC and a single VM.

Similar Messages

  • OAS 10g multi node install

    Hi,
    I have installed Oracle 10 App Server successfully on my machine with webtier, app tier, and database on a single node. I would like to request if someone can help me out for the steps installing Oracle10g AS on multinode.
    i.e appl on one and database on other node.
    Thanking you
    regards,

    For that
    Install DB
    Look for Metadata Repository Create Assitant this will help you to create the Repository for the Infra
    Then install infra and you have to point to this DB so it wont install the DB and install only the app.
    Also if you want a midtier appserver in other box, you can point the installation to the repository in other server.
    Greetings

  • Single node install

    Is it possible to install the APPS on one machine and set oracle unix account as database owner and applmgr as apps owner?
    Thanks,
    P.

    Yes. Rapidwiz installation wizard will prompt you for this information. In this case you may want to start the installation as root.

  • 9ir2 Single Node RAC + RH80

    Hi all.
    I'm triying to install a single node RAC based in the single node rac for linux document in the metalink.
    The document was made based in a oracle 9iR1 database an RH71, I have followed the steps and i have a working kernel made by my own, the raw devices, and softdog hacked for being testing only. But the service does not go up.
    I don't know if someone have made a single node rac instalation and can help me to choose the right pieces.
    I don't have a RHAS2.1 but I do have a UnitedLinux 1.0 Server Patched.
    I want to try the RAC tech but here (ecuador-sudamerica) is dificult to find firewire cards and disks so I´m working around a single node instalation.
    Any help will be apreciate.
    Fernando

    Hi
    Database version and GI versions are 11.2.0.2.2. And these are not multinode RAC configuration at any given time only single instance will be there for any given database. Some thing like ACTIVE and PASSIVE in hardware clusters such are VCS (Veritas Clusters).
    I agree with you failover sinario in multi node (2 or more) RAC environments. In single node clustering only one instance will be there, like services in multinode, here whole instance will be re created on available nodes.
    Hi
    Database version and GI versions are 11.2.0.2.2. And these are not multi node RAC configuration at any given time only single instance will be there for any given database. Some thing like ACTIVE and PASSIVE in hardware clusters such are VCS (VERITAS Clusters).
    I agree with you failover scenario in multi node (2 or more) RAC environments. In single node clustering only one instance will be there, like services in multi node, here whole instance will be re created on available nodes.
    Thanks,
    Thanks,

  • Applying PL19 for SAP J2EE 6.20  for a Single Node

    We are trying to upgrade from EP6 SP2 patch 2 to patch 3.
    A pre-req for applying Patch3 is that we need to be at PL19. Turns out we are in between PL16 and  PL17 from a SAP J2EE 6.20 standpoint.
    We managed to download SAPJ2EE620C_19-10001433.SAR the SAR file for getting the SAP J2EE 6.20 from PL16+ to PL19.
    On reading SAP Note 529088 ( that helps you with installing the SAR file ) it seems "SAPJ2EE620C..." the 'C" in the SAR file name denotes that it is for a Cluster Node. We have a Single node install. For which we ought to see a 'S' in that place. On Service.sap.com we dont know of a place where we can find the .SAR file that we may need for a single node version.
    We  went ahead and ran the visual.bat and that brought up a screen meant for a cluster version.
    It has been two days since we have working on this.
    Anybody has any idea/experience with what we are taking about. Please help.
    thanx for your help.
    rj.

    Hi rj,
    If you have installed EP6 SP2, you have installed the Clustered Version of J2EE (dispatcher, server, state(pl21)).  The Single node was used for EP5.  I believe you are getting this terminology confused with a clustered install of EP6 for HA purposes where the actual application piece is clustered.  So even an EP6 install running on a single server runs on a the J2EE Engine Cluster. 
    So if you ran the visual.bat for PL19 and the portal started up fine, you have successfully upgraded your J2EE version to PL 19.  Just a quick hint, when you are running the patch install, select upgrade and put in the path to your instance (i.e. c:\usr\sap\DEP1\j2ee\j2ee_00).
    Hope this helps to clarify,
    Marty

  • Install RAC OBS on single node using VMWare

    Re: How to install Muti_node R12 using VMWARE
    Mine is a little different.
    I have the Test server which has OEL5 and one OAS 10g(Oracle application Server) with 10g database.
    I want to install RAC OBS on this server by installing VMWare for the single node. I do not want to wipe out the OAS, reinstore OSL5 and start from a blank machine.
    Can I keep what I have on the server and install RAC OBS by installing VMWare, configuring the virtual sharing disks, and install RAC OBS using ASM?

    Hi,
    Can I keep what I have on the server and install RAC OBS by installing VMWare, configuring the virtual sharing disks, and install RAC OBS using ASM?Yes, you can. Just make sure you have sufficient resources on this machine.
    Note: 388577.1 - Using Oracle 10g Release 2 Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=388577.1
    Regards,
    Hussein

  • Oracle Single Node RAC - Oralce Clusterware Install

    Hi
    I want to install Oracle Clusterware to perform Active / Passive failiver for a 2 node cluster
    I plan to use Oracle Single Node RAC for this and have Oracle Clusterware control the active passive failover.
    However - I do not want to use ASM in any of my set-up.
    We have a NetApp filer and are using NFS / NetApp technologies to control backups (Oracle snap manager).
    Is this possible?
    All the documents I have include reference to ASM
    If I try and install Grid - I am also asked for ASM information.
    I find ASM an un-necessary overhead given the storage we have and do want to use it,
    Can anyone help?

    Hi,
    no you don't need ASM to have RAC One Node. OCR and Voting disk can be on NFS, simply use Shared Disk location during installation, and you won't get asked about ASM.
    http://docs.oracle.com/cd/E11882_01/install.112/e22489/storage.htm#CDECEBGH
    Especially http://docs.oracle.com/cd/E11882_01/install.112/e22489/storage.htm#CDEDAHGB
    What you should use in conjunction with NFS however is dNFS.
    Regards
    Sebastian

  • Migrate Single Node 10g STreams to Multi Node RAC

    We are currently running 10g STreams. One capture process enqueing LCR into one queue. Propagation job dequeues messages and propagates them to a Destination queue. Then our Apply process at Destination database dequeues and apply changes.
    We have developed a single shell script STREAMSsetup.sh that does all the magic on setting up streams (capture, apply, propagator and the table queues.)
    Now, we are in the process of designing our new Horizontal architecture with Oracle RAC. We envision it is going to be a Data Guard Migration from Single node to the RAC environment.
    My question is, can we just let Data Guard takes care of that, expecting all Streams pieces will be in place within the RAC environment? OR do you recomment we remove all streams configuration and re-run our magic script STREAMSsetup.sh to set everything up again once migrated to the RAC environment. ???
    I now Streams follows an Instance Owner rule when it comes to where Capture or Apply will be started or stoped.
    I would appreciate if someone have had any experience with this type of migration provide any feedback.
    Thanks,
    Arqui

    Yes, we are opening an SR. Everything is pointing into the direction of recreating Streams configuration from RAC/ASM environment once migrated, using the instance with the lowest Instance number in the Cluster. That instance will be registered as the Primary instance owner of the Buffer queue. If primary instance fails queue ownership is transferred automatically to the next instance in the cluster and capture is started automatically in the other node.
    Thanks,
    ARqui

  • Install oracle10g AS 904 infrastructure and middle tiers on single node??

    Hi
    I will install oracle10g AS 904 infrastructure and middle tiers on single node.
    I have some question.
    1.install infrastructure and middle tiers must have different home_dir , It is mean use one user (EX:oracle) or two users (EX: infra and mid ) install ?
    2. If use one user install , How to edit the user profile ?
    3. If it install complete , Which em console do I start (infra or middle)??
    4. Ple give the clear steps to install Infrastructure and Portal and wireless
    on single host for AIX5L.
    thank
    kevin

    Hi Kevin,
    1. Create two seprate Oracle homes. Use the same user to install both.
    2. Are you refering to changing ORACLE_HOME, etc?
    3. Both. To save memory you can shut them down when you don't need them.
    4. Use the quick installation guide. You can find it under documentation here on OTN.
    Regards,
    Mathias

  • Install 10gr2 ASM on single node, need clusterware installe first?

    Install 10gr2 ASM on single node, Do I need install clusterware first?
    When I install clusterware on single node, it shows " the specified nodes are not clusterable"
    Thanks.

    ASM and clusterware are two separate things. Clusterware is required only if you are setting up a RAC environment, is this your case? If you are just planning to use ASM then proceed with the RDBMS (database disk) install and use the DBCA to perform ASM configuration. It is assumed you have the raw devices ready to setup the ASM instance. Once the ASM instance is ready you can create the database to use the ASM disks.
    ~ Madrid
    http://hrivera99.blogspot.com/

  • Install a grid infrastructure for a cluster for single node Windows Server

    Hello,
    Can you suggest me how to install a Oracle Single Node RAC 11g on a Windows Server 2008 x64 bits? It's for testing purposes and I don't need two nodes. I know that Linux is better, but my company only uses Windows servers. Our former consultant was able to do it, but didn't tell us how to and that server was lost.
    I know that we have to install first Grid Infrastructure. Running the "Oracle Grid Infrastructure" installer, I could successfully install a "Grid Infrastructure for a Standalone Server". But that grid is not for a RAC database. When trying to install the Database software, it allowed to me to only install "Single instance database", not "Real Application Cluster database installation".
    Running the "Oracle Grid Infrastructure" installer, I tried to select option:
    "Install and Configure Grid Infrastructure for a Cluster" -> Typical Installation:
    SCAN Name: SRVORAC-cluster
    Validating SCAN information
    INS-40922 Invalid SCAN Name - unresolvable to IP address.
    Is it possible to install a grid infrastructure for a cluster for a single-node or one-node Windows Server ?
    Edited by: user521219 on Jan 30, 2012 12:46 PM

    HI,
    You probably have misconception about Single node RAC. This feature does not need that you have only one physical machine in a RAC, it actually means that in a RAC environment (2 or more nodes), you can run your database on only one node(single instance) and then later you can move this single instance to any other node of the RAC (so that you can do some patching on this node making your database available all the time). This also has some other benefits, see bellow.
    http://www.oracle.com/technetwork/database/clustering/overview/ug-raconenode-2009-130760.pdf
    http://docs.oracle.com/cd/E11882_01/install.112/e25666/whatsnew.htm#sthref8
    Salman

  • Info about Listener for oracle 10g and 11g installed on single systm

    Hi,
    I have installed oracle 10g n 11g on my system. I have question regarding oracle listener.
    oracle 10g , Listener.ora
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (ADDRESS = (PROTOCOL = TCP)(HOST = kankala.kalyan)(PORT = 1521))
    oracle 11g, Listener.ora
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
    (ADDRESS = (PROTOCOL = TCP)(HOST = kankala.kalyan)(PORT = 1522))
    my question is why the listener's names are same even though thy are on different ports?
    and for people worrying, why i have installed 10 n 11 is
    Initally only oracle 11g was installed on my system. Later, I was learning forms for first time and i have to connect to database frm developer suite 10g. so i installed oracle 10g database.

    The names are the same because that is the way you created them.
    If you want to make a change use NETCA to drop and recreate one of them.
    Just make sure you've defined ORACLE_HOME correctly before you do it.

  • Can ASM be used in single node 11g?

    I tried to create DB in 11g using ASM, but I was asked to create oracle CSS services (which is for RAC). of course it failed. My platform is oracle linux 5. As I remember 10g can use ASM (in Solaris), any one has idea about 11g? how to use ASM (not RAC)? (I already used ASM in RAC 11g)
    Thank you in advance.

    Although this is for Oracle 10gR2, here's a web page that might shed some light on your situation: Note that is says CSS is created automatically even if you don't use it.
    http://download-west.oracle.com/docs/html/B10130_02/deinstall.htm#BCFBEEAJ
    6.2 Removing Oracle Cluster Synchronization Services (CSS)
    The first time you install Oracle Database, Oracle Universal Installer configures and starts a single-node version of the Oracle Cluster Synchronization Services (CSS) service. The CSS service enables synchronization between an Automatic Storage Management (ASM) instance and the database instances that rely on it for database file storage. It is configured and started even if you do not choose Automatic Storage Management as a storage mechanism for database files.
    If you do not choose Automatic Storage Management as a storage option, you can delete OracleCSService. To delete this service without deleting the Oracle home, perform the following:

  • Convert 11.1.0.7 EBS 12.1.3 single node to RAC with ASM on 11.2.0.3 cluster

    Hi
    I am trying to convert a single node 11.1.0.7 database with EBS 12.1.3 version from single to 2-node RAC ASM on Oracle clusterware 11.2.0.3 on AIX 6.1 - 64 bit
    I am following Oracle metalink document note id 466649.1 . My 11.2.0.3 clusterware is already setup correctly and working fine as per document E24614-03.
    However I am currently stuck in section 3.3:Configure TNS listener (Doc id : 466649.1) . The netca is unable to start the listener and failing with error as below.
    However when I start the same locally from lsnrctl command listener starts.
    trace_OraDb11g_home1-1212159AM174.log
    ====================================
    [AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:144] runCommand: process returns 123
    [AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:161] RunTimeExec: output>
    [AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:164] Attempting to start `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr
    ` on member `jxn-ux-ebs1d1q`
    [AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:164] Start of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on member
    `jxn-ux-ebs1d1q` failed.
    [AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] Attempting to stop `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr`
    on member `jxn-ux-ebs1d1q`
    [AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] Stop of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on member
    `jxn-ux-ebs1d1q` succeeded.
    [AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] CRS-2632: There are no more servers to try to place resource 'ora.jxn-ux-e
    bs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy
    [AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:170] RunTimeExec: error>
    [AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:173] CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr'
    has placement error.
    [AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:173]
    [AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:192] Returning from RunTimeExec.runCommand
    [AWT-EventQueue-0] [18:34:31:890] [HAOperationImpl.runCommand:1221] signed exit value = 123
    [AWT-EventQueue-0] [18:34:31:890] [HAOperationImpl.runCommand:1258] set status HA_RES_RELOCATE_ERR
    [AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:84] Returned from executing the HA Operation
    [AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Attempting to start `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q
    .lsnr` on member `jxn-ux-ebs1d1q`
    [AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Start of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on m
    ember `jxn-ux-ebs1d1q` failed.
    [AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Attempting to stop `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.
    lsnr` on member `jxn-ux-ebs1d1q`
    [AWT-EventQueue-0] [18:34:31:892] [HAStartOperation.run:89] OUTPUT> Stop of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on me
    mber `jxn-ux-ebs1d1q` succeeded.
    [AWT-EventQueue-0] [18:34:31:892] [HAStartOperation.run:89] OUTPUT> CRS-2632: There are no more servers to try to place resource 'ora.jxn
    -ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy
    [AWT-EventQueue-0] [18:34:31:893] [HAStartOperation.run:95] ERROR> CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.l
    snr' has placement error.
    [AWT-EventQueue-0] [18:34:31:893] [LocalCommand.execute:56] LocalCommand.execute: Returned from run method
    [AWT-EventQueue-0] [18:34:31:893] [HAOperationResult.getOutputAll:114] outLine is [CRS-2632: There are no more servers to try to place re
    source 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy]
    [AWT-EventQueue-0] [18:34:31:894] [HAOperationResult.getOutputAll:115] errLine is [CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_
    JXN-UX-EBS1D1Q.lsnr' has placement error.]
    [AWT-EventQueue-0] [18:36:39:994] [ca.ConfigureListenerOPS.getNodeNameIndex:-1] getNodeNameIndex: Matching LISTENER_EBSQA_JXN-UX-EBS1D1Q
    [AWT-EventQueue-0] [18:36:39:994] [ca.ConfigureListenerOPS.getListenerRootName:-1] ListenerName is LISTENER_EBSQA
    The crsctl has details as below:
    =====================
    NAME TARGET STATE SERVER STATE_DETAILS
    Cluster Resources
    ora.LISTENER_SCAN1.lsnr
    1 ONLINE ONLINE jxn-ux-ebs2d1q
    ora.LISTENER_SCAN2.lsnr
    1 ONLINE ONLINE jxn-ux-ebs1d1q
    ora.LISTENER_SCAN3.lsnr
    1 ONLINE ONLINE jxn-ux-ebs1d1q
    ora.cvu
    1 ONLINE ONLINE jxn-ux-ebs1d1q
    ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr
    1 ONLINE OFFLINE
    ora.jxn-ux-ebs1d1q.vip
    1 ONLINE ONLINE jxn-ux-ebs1d1q
    ora.jxn-ux-ebs2d1q.LISTENER_EBSQA_JXN-UX-EBS2D1Q.lsnr
    1 ONLINE OFFLINE
    Not sure how to fix this .
    Regards
    Ram

    I am trying to convert a single node 11.1.0.7 database with EBS 12.1.3 version from single to 2-node RAC ASM on Oracle clusterware 11.2.0.3 on AIX 6.1 - 64 bit You don't need to create listeners, after installing 11203 cluster there will be LISTENER running from $GRID_HOME
    along with SCAN_LISTENERS

  • Multiple ASM instances on a single node

    Can i have multiple ASM instances on a single node? This is to have each instance supporting different environment dev,stage etc
    Thanks
    Sannidhi

    I had been discussing the same issue with someone from Oracle. I asked for multiple ASMs on a server so that we could have seperate ASMs running for, say, 10g and 11g.
    He explained that we should think of ASM as being the same as Veritas FileSystem. We don't run multiple instances of Veritas on our servers. On single Veritas "instance" (set of drivers) provides all the Veritas Fx mountpoints on the server. Similarly, there should be only 1 ASM instance on a server.
    (substitute UFS or ZFS or CFS for Veritas in the above example and you still have only 1 filesystem manager on a server providing one type of filesystem, although you could have, say , UFS and Veritas co-exist ; just as you could have Veritas, ASM and Raw co-exist on a server).
    Hemant K Chitale
    Edited by: Hemant K Chitale on Sep 29, 2009 11:50 AM

Maybe you are looking for