10gAS detecting report errors from forms

Hi
We are running 10g reports and forms on Red Hat.
The forms are run using a run_report_object command to generate pdf output and then displayed using web.show_document. The parameters for the reports are entered into a form and sometimes are validated and sometimes not.
On the whole it all works well. However, if a bad parameter is passed to a report, the report will not run and an error will be held in the report server for that report. Is there an easy way to programmatically detect in forms, that the report has errored and then to bring that error message back and display it in the form?
TIA
Thanks
Tony

Hi,
in the past I did this with the Reports Server tables. If you install the queue table then Reports Server writes all information to the database from where you can read it
Frank

Similar Messages

4.5 to 6i migration or report calling from forms in XE???

Hi Friends,
I really appreciate your helping tendency. Let me explain the whole scenario.
My application basically consists of
Forms [32 Bit] Version 5.0.6.8.0 (Production)
Report Builder 3.0.5.8.0
Oracle Enterprise Edition Release 9.2.0.1.0 - Production
Now we migrated our database into Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production. After the migration all the existing forms and report individually were running without any problem. But there was a huge problem. Whenever I tried to call any report from any form the report engine appeared and then stopped responding. So report calling from forms was not possible after the database migration. I was suggested by someone from OTN forum to migrate my forms and reports into 6i. I have started doing the migration using ifcmp60. WIth forms 6i, reports can be called from forms. But I am facing problem in every other steps. There are many things are not working after the migration though the migration log shows no error. For example, COMMIT_FORM, EXECUTE_QUERY (for detail table), LOV, TOOL.GETVAR lots of things are not working.
My application has 200 forms and 250 reports.
Please help and advise on:
How to call reports from form when the database is XE Or
How to overcome the stated migration problem
Rgds,
Luther

Dear Mark:
I have two choices. I can either migrate to 6i or I can go with the existing 4.5. If I go with 4.5 ......the reports are not being called from forms. This problem is happening after I changed the database from 9i to XE. Please advise what to do so that I can keep my forms in 4.5, database in XE and can call reports from forms.
Rgds,
Luther

Start report server from forms.

Hello everybody, merry chrismats to all.
Im working with Forms & Developer DevSuite in Red Hat Linux ES/AS.
Sometimes when I call a report from form using RUN_REPORT_OBJECT the report server is up & working but the forms dont find it & say FRM-41213 error, but after trying sometimes it begin to work.
Question : ¿ Is there anyway to start and stop report server from forms ?
Thanks in advanced & regards.

Hello,
For all queries involving testcases or queries that are potentially bug related
we recommend you log a Service Request (SR) with Support via Metalink (http://metalink.oracle.com).
This will ensure your query is tracked appropriately and any urgent requests can be
dealt with in a timely manner by Global Support Services. May we also take this opportunity to remind you that the Metalink Library pages contain many Forms / Reports
articles which could be of use to you.
Best Regards
Denis SEGARD

Show Reports Error in Forms

Hi,
is it possible to show the Reports error in Forms. Like
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('http://localhost:8889/reports/rwservlet/getjobid'
|| SUBSTR(v_rep,INSTR(v_rep,'_',-1)+1)||'?'||'server=rep_server','_blank');
ELSE
===> SHOW ME THE PROBLEM
END IF;
Regards, Peter

Hi,
You can display the Reports errors indirectly - through the database....
You can create a table in which the reports errors are inserted as well as the date , time , user. Next , the form module can read this row using the max(date) and max(time) and the username .
Simon

How would I display paper report, called from forms?

I want to call reports 9i, from forms 9i, and display the paper report on the screen. How would I do this? So far I have gotten forms to call the report and give me a status back of FINISHED, but I don't see anything displayed on my screen.
Thank you.

Hi,
you use the Forms Web.Show_Document() built-in for this. Please read http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
Frank

Accessing clustered report servers from Forms

Hi
The "Oracle Fusion Middleware Publishing Reports to the Web with Oracle Reports Services 11g R2 (11.1.2)" manual in Section 2.5 talks about setting up a High Availability environment for Reports.
It discusses how to set the cluster configuration and how to create a reports job repository in the database. It says that you need to have a unique name for each report server, finally it says that you should use Oracle Web Cache to load balance for the reports cluster.
If you are calling the report server from Forms with a run_report_object then you don't go via the web cache, so I am confused how you send your report request to the reports cluster in a load balanced fashion.
Has anyone done this or can explain how this works for Forms?
TIA
Tony

I know that this is an old thread, but I've taken the liberty to bump it up, as I have the same question.
The Reports documentation describes quite succinctly how to configure the report servers to be clustered - no problem there.
The issue is that when you run a report from forms using run_report_object, you are required to specify a report server name. The Reports docs specify that all of the server names must be unique, so this seems to indicate that you cannot use a clustered report server environment from Forms, or am I missing something somewhere? Oh, wait - an insight coming here - Can you (I'll test this, but it would be good to know) specify a cluster name instead of an actual report server name? Google to the rescue:
Using RUN_REPORT_OBJECT: If the call specifies a Reports Server cluster name instead of a Reports Server name, the reports_servermap environment variable must be set in the Oracle Forms Services default.env file. If your Oracle Forms application uses multiple Reports Server cluster names, you can map each of those cluster names to a different Reports Server using reports_servermap in rwservlet.properties, as follows:
There's the answer. Sometimes writing the question down helps figure out the answer :)
Regards,
John

Calling Crystal Reports XI from Forms 10g

Any one succeed in calling Crystal Reports XI from Forms 10g,
or using Import Java Class in Forms 10g
to call Crystal Reports XI
or any other method to invoke crystal Reports XI from FORMS
share your Knowledge to OTN
please provide me the steps,documents to [email protected]
Message was edited by:
user501763

Hi,
Use web.show_document for calling the reports. Check out forms online help for syntax and example of web.show_document.
-Arun

Report Running From Forms

How to Run a Report from Form Builder
i use Run_report_object function
by givng report object name created in form
report is already created
i receive error message 'Report Name is not given'
Kashif Khan
------

Here is an example. This is the when-button-pressed trigger. I use the in-process reports server and therefore the web.show_document, but executing the run_report_object is similar.
Hope this helps.
Z.
DECLARE
rep_url varchar2(2000);
myenvid varchar2(128);
BEGIN
-- Check to ensure we have a valid record first
if :PPS_AIR_MISSION.UNIQUE_ID is null then
message('No air mission record is displayed to generate the report.', ACKNOWLEDGE);
message(' ', NO_ACKNOWLEDGE);
null;
else
Tool_env.Getvar('JTLSAAR',myenvid);
rep_url:='/reports/rwservlet?&envid='||myenvid||'&&report=aar_amhist1.rdf&ssoconn='||myenvid
||'&desformat=pdf&destype=cache&paramform=no'
||'&MISSION_ID='||
'"(''' || :PPS_AIR_MISSION.UNIQUE_ID || ''')"' ;
-- synchronize and run the report
SYNCHRONIZE;
WEB.SHOW_DOCUMENT(rep_url,'_blank');
end if;
END;

How to display the output of a reports called from forms in the same window

Hi all.
I have installed Forms / Reports 11g Rel2 developer only installation on my windows 7 box.
I can successfully call a reports from forms using RUN_REPORT_OBJECT and WEB_SHOW.document, but the report is opened in a new window.
I'd like to open it in the same widow, in a new tab, similar to ctrl-t and make a call.
How is that possible?.
I'm using Chrome 25.0. Could this be done through browser settings?.
Thanks in advance ...!
Edited by: myluism on 14-mar-2013 6:09

Don't know for Chrome, so Google for it.
One more thing, though. what is the 2nd parameter in web.show_document? Is it '_blank'? If not, try that.

Report Called from FORMS having Printing Problem

Hi all
Guys i have a report problem in reports 6i.
I am calling a report from my FORM 6i directly to printer (a dot matrix printer).
I have set
Add_Parameter(pl_id,'DesType',TEXT_PARAMETER,'printer');
The report is actually a confirmation report and i have given its layout height equal to 3.7 . But when i send it to printer it ejects the paper equal to 11 (equal to height of a portarait report).
How can manage this ejection from Form or Report Side.
NOTE : This problem occurs even if print the report from report preview(means not printed directlty from FORM).
Kindly help me with this if any.
I need it urgent.
Thanx.

Hello All
The furthur detail to my previous problem is given as follows:
I am getting problem
with the Oracle reports. I have a dot matrix printer (Epson LQ-300, which is a
tractor feed printer). While printing a report which is always not more than half a
page, the printer does not stop after printing the report(the half page). It stops at
the end of the page. I mean that half the page is printed and the rest half is blank.
I want that the printer should print only at half a page. On the blank half it should
print another copy of same report.
Regards,
Qaiser Qayyum Malik.

Can I call a report in Reports 6i from Forms Services 10g?

Hi there,
I was wondering if I could call a report in Reports 6i from my application in Forms Services 10g. If so, how could I do it?
Thanks!

In Forms 6i you probably did use RUN_PRODUCT to call reports. In 9i onwards you should use RUN_REPORT_OBJECT instead.
See http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
Note that you should be able to run RDF files without any conversion.

How to display a Report 9i from Forms if the Report has a Parameter Form?

Hi,
could some one please post me a code sample to show how to call a (paper layout, RDF) Report from Forms if I would like it to display the Report's parameter form first?
Thank you in advance.
Tamas Szecsy
I used the following code segment do achieve the job, but I get "REP-546: Warning: The value of restricted LOV parameter P_ALAL is not among the selectable values" message, even though I would like to specify the P_ALAL value on the report's parameter Form.
declare
paramlist_id ParamList;
tmp_riport_name varchar2(200);
report_id          report_object;
report_job_id varchar2(200);
tmp_id number;
begin
-- init
tmp_riport_name := null;
          -- parameter list
paramlist_id := get_parameter_list('mytmp_params');
if not id_null(paramlist_id) then
destroy_parameter_list(paramlist_id);
end if;
paramlist_id := Create_Parameter_List('mytmp_params');
add_parameter( paramlist_id, 'PARAMFORM', TEXT_PARAMETER, 'YES' );
          -- call report
report_id := find_report_object( 'DUMMY' );
if report_id.id is null then
     return;
end if;
-- display
set_report_object_property( report_id, report_execution_mode, runtime );
set_report_object_property( report_id, report_comm_mode, synchronous );
set_report_object_property( report_id, report_destype, 'preview' );
set_report_object_property( report_id, report_desformat, 'PDF' );
set_report_object_property( report_id, report_server, 'rep_geoias' );
     set_report_object_property( report_id, report_filename, :ALAP_REPORTS_NAME||'.rep' );
report_job_id := run_report_object( report_id, paramlist_id );
tmp_id := to_number(substr( report_job_id, length(name_in('rep_geoias'))+2 ));
web.show_document( '/reports/rwservlet/getjobid'||tmp_id||'?server=rep_geoias', '_blank' );
END;

I think you specified report object name incorrect.
in command line:
repid := FIND_REPORT_OBJECT('REPORT1');
Report1 must be name of report object in Form Builder.
However to call report from Oracle Form you must do more work. For example:
- Create report server name
- Adding some code to set property for report object base on report server you created.
Cheer!

Run report 9i from form builder 9i

Dear all,
I build report from report builder 9i.
How to run this report in form builder 9i.
Best regards,
Jansen Hutagalung.

Jansen,
I really like short questions, but yours missing the point. What do you mean by running Reports from Forms builder? Do you mean how to run it from a Forms application started from Forms builder? There is a Whitepaper in teh collateral section of otn.oracle.com/products/forms that immediately makes you an expert in Forms/Reports integration
Frank

Change Reports query from Form

Hi,
Can I use PL/SQL in a Form to modify or add to the Report's query in runtime?
i.e
If a Text Item in a form was left blank in then I would like to modify the WHERE clause
in the Report to remove one of the parameter defined.
in Report's query
WHERE a.myfield >= :p_1 and a.myfield <= :p_2
become
WHERE a.myfield >= :p_1
if the Text Item in form (for p_2) was left blank.
Any help would be greatful.
Many Thanks,
Buntoro

Hi,
you can use lexical parameter to do this thing
It's better if you change your query to
select * from emp where &where_clause
here,
where_clause is a parameter with some default value. U must give some default value to it.
ans then pass this parameter from form..
hope it will help you...
...

Calling Reports 10g from Forms 10g without an app server

Hi
I have Forms 10g, and for development/testing purposes I am able to run a form in my local machine using the standalone OC4J. I needn't to deploy the form to test it.
I can do the same with Reports 10g -- run a report in my local machine without an app server.
However, I could not manage to call a Report from a Form that way, without an app server. It does not seem possible -- is it? Is there a way to set this up using the standalone OC4J or something like that?
Thanks
Luis
Message was edited by:
Luis Cabral

Hi
Sorry for the late reply.
Here's how you start the report server from windows XP machine.
1. Choose a unique name for the report server. Eg. <your_pc_name>_repserver
2. As the report server runs in its own process, it can be started by the following command, accessible from the \ bin directory of the
Oracle Developer Suite or Oracle Application Server 10g installation.
rwserver –install <server_name> . It is now treated as a windows service and hence you can stop/start or restart from the services menu.
3. If you want specific settings for your report server, look for the <rep_server_name>.conf file under <orahome>/reports/conf directory, after starting the server from above command. This file is created by oracle automatically, once the rep server gets started.
For more info on this, please refer to white papers on the Forms and reports integration, found on the otn->Forms.
Hope this helps
Suma

10gAS detecting report errors from forms

Similar Messages

Maybe you are looking for