10gAS migartion

hi
I have a 10gAS server on windows and I want to migrate it to another windows machine how can this be done
can someone provide me with link to some useful documents
Regards

Hi,
Can you post the logs to an FTP site where we can retrieve them and take a look at what happened in your install? We'll need the install logs as well as the config tool logs. Thanks.

Similar Messages

What is the diffrence between 10gAS and 11g fusion middleware?

hi,
i want to know about, we have installed R12.1.1 on test server . we have installed 10gAS and the database is 11g for form and reports in another server. but our management want's oracle 11g fusion middleware on it.
what is right decision should i suppose to take.
and also please say why should i go with 10AS why not 11g fusion middleware.
thank you
kamal abbasi

Those letters simply indicate the region where the MacBook will be sold.
LL = North America
LZ = Chile, Paraguay, Uruguay.
http://www.jbfaq.com/article.asp?id=63

How to Block / Hardening of "Unused Ports" in OracleAS-10gAS

Hi All,
I have installed Oracle 10gAS PatchSet-2 9.0.4.2.0 and Windows-2000 SP-4 OS. The Both instances (INFRA & Mid-Tier) are installed on same box. My AS is working fine and all components are working great.
+
I can find-out the ports being used/configured by 10gAS of this installation. Rest all other Ports are open as such on this OS and are not being used. So basically i want to "Block all those Unused Ports of this 10gAS installation"
1. Is it Possible..? If Yes! how to start about this.
2. Does Oracle Provide a Documentation on this or the details of this is included anywhere in any of the Docs.?
This has been pointed out by one of our Corporate Auditors who has audited our entire IT Infrastructure setup and given us that comment. Can anybody would help me in this regard or suggest me tips / docs. which could be useful to me. Looking for ur help.
Regards,
Kamesh Rastogi

Hello,
I would clarify what i need and intend to do......
Let say my HTTP Server is configured and listening at port 7779 & 7778. And the range of this is 7777 - 7999 as provided by App.Serevr.
SO i want to block all the ports of above range and ONLY want to open or allow requests coming for Port No. 7779 or 7778.
What all is being used by App.Server is know to us and we can find it out and list it....but how to block them...here in App.Server.
Regards,
Kamesh Rastogi

Installing Fonts on 10gAS 10.1.2.3

Hello All
We have 10gAS R2 (10.1.2.3) running on OEL 5 and I just installed ArialNarrow font and they are working fine but AriallNarrow with Style BOLD, ITALICS, BOLD+ITALICS are NOT coming up in PDF reports on the screen.
I have tried mapping using PDF Aliasing in uifont.ali but nothing works at all. Application server is just ignoring all Styles. I also followed metalink document 2720631.1
regarding installing a printer in reports.sh then changing uiprint.txt & uifiont.ali for PDF subset but still no luck. I do have all ttf files installed and REPORTS_PATH configured.
Could someone please help?.
Thanks
Amit

Hello All
This is resolved now. Apart from all, AFM files were missing from $ORACLE_HOME/guicommon/tk/admin/AFM. This note is helpful : 261879.1
Thanks
Amit

How to set up Disco 10g in an existing 10gAS installation

============
Server has
Oracle 10gAS
Infrastructure (inlcuding OID/SSO)
Midtier (forms / reports) for 4 environments/databases
Version 10.1.2.3 Standard Edition
Oracle databases (environments)
DEV, TEST, TRAIN, UAT, OIDLDAP (for infrastructure)
============
This is a development environment that currently as no Discoverer set up.
============
I need to set up Disco 10g Viewer etc, for 4 dbs (and end user layers)
[1] Should I use the existing mid-tier, or install an additional tier exclusively for Discoverer
[2] How do I set up four Disco 10g configurations for the 4 databases (1 end user layer per database)
[3] How do I integrate Disco with SSO
Edited by: user7380263 on 20-Nov-2008 04:54

Hi Paul,
Actually, I set up a databased connect by local sqlplus. I am testing form application. no error and no data.
from sqlplus, i can user userid string in formsweb.cfg logs into database and get data by sqlplus
I think I need to set datasource in application Server inside.
I use buttom of create like
But I get message as "Commit Failed - The Transactional(XA) Location and the EJB Location are required when configuring an Emulated data source."
How to fill information in below fields:
JNDI Locations
For an emulated Data Source, please specify all three location attributes. It is recommended that you reference the EJB Location attribute in your code to look up this Data Source. For a non-emulated Data Source, the location attribute is all that is needed.
* Location
Transactional(XA) Location
EJB Location
any wrong?
Jimmy
Edited by: user589812 on Dec 3, 2008 2:50 PM

MIGARTION SAP PI 7.0 To 7.4(DualStack)

Hi Experts
MIGARTION SAP PI 7.0 To 7.4(DualStack)?
the existing interfaces are directly implemented Production. now i am migarate the existing interfaces In PI 7.4 DEV?
can you tell me step by step procedure .
BR,
Sagar.

As it is a migration, you can make use of the below tool which converts classical scenarios into Integrated Configuration.
http://scn.sap.com/community/process-orchestration/blog/2012/11/19/moving-integration-directory-artifacts-from-dual-stack-to-single-stack

OFM 11.1.1.4 trying to write into jacob.dll, d2kwut60.dll and JNIsharedstubs.dll when these are being used by 10gAS

Hi All,
We are working on a 10g Application Server to Oracle Fusion Middleware upgrade project. We currently have more than one application in the 10gAS and the upgrade to OFM is being done one at a time. So, until all the applications gets upgraded to OFM, we will have few applications running on 10gAS and some on OFM. We access these applications through Citrix. The Citrix server has JRE 1.6.0_29 which is used by our 10gAS applications. This is the same JRE version that our future OFM apps will also be using. When we tried to test our OFM upgraded app in our development environment, we found that fusion is trying to update the above mentioned dll files. That said, I have two questions:
1. What is that Fusion is trying to wirte into these DLL files? Any idea?
2. Will Fusion changing these files have any impact on the applications that is running on 10GAS?
I would appreicate your response.
Thanks in Advance,
Prathap

These files are part of WEBUTIL and are downloaded to a client-location as configured in the webutil.cfg -file. If you use WEBUTIL in your 10G IAS, these files are also downloaded there. I guess that for 10G and 11G the dll's are different, but i can't tell you what happens when you have a 1=G and a 11G application running on one client at the same time. I'd suggest you try out a form which uses functionality where one of the dll's is used.

Standalone Report Service in 10gAS

I have just installed 10gAS R2 (10.1.2.0.2) on Red Hat EL4. I installed the infrastructure and middle-tier on the same box and everything went fine. I have a report server (rep_server1) that is running. I would like to create two other report servers (development and test) that run on the same server. I was told (from a colleague) that using "rwserver -install server=development" is no longer supported in 10.1.2.0.2. I was also told to use OPMN to create the services, so it would be "registered" with OPMN. I have read through the Report Services documentation but was unable to locate any instruction on how to do this. Am I missing something here, or was I mis-informed, or am I just blind?
Thanks in advance,
Dan

Ok, this is what you want to do.
Set your display
setenv DISPLAY 192.45.197.48:0.0Create the standalone reports server
$ORACLE_HOME/bin/rwserver.sh server=testA dialog box will start, and it says starting reports server
WAIT until is says ready, then click the shutdown button
Then
$ORACLE_HOME/bin/addNewServerTarget.sh test
$ORACLE_HOME/opmn/bin/opmnctl stopall
$ORACLE_HOME/opmn/bin/opmnctl startall
$ORACLE_HOME/opmn/bin/opmnctl statusYou should now see your report server listed and it should be alive. Now the server is registered with OPMN and it should be good to go. Deleting the reports server is another story. I'm still trying to figure out how to do that.
Good Luck

IerUpgrade from 10gAS(9.0.4) to 10gASR2(10.1.2.0.2)

Hi,
I am upgrading from Upgrade from 10gAS(9.0.4) to 10gASR2(10.1.2.0.2), the infra database version is 9.0.1.5.0, my question is do I need to first upgrade the database to 10g and then the middle tier or the other way.
Architecture
Server 1 - Infrastructure node
Server 2 - Middle Tier
Edited by: srsatya on Jul 23, 2009 1:23 AM

Take a look at this:
http://download.oracle.com/docs/cd/B14099_19/sol.1012/quickupgrade.1012/quickupgrade/toc.htm#CJAEFHHG
Thanks
Shail

Programmatic creation of Oracle 10gAS Release 2 general mod_plsql DADs

Hi Everyone,
We use Oracle Application Server 10gAS version 10.1.2.3.0 and as part of our setup we create and use General type DADs. (Created within Enterprise Manager, under HTTP Server --> Administration tab --> PL/SQL Properties --> DADs.
My question is does anyone know if it is possible to programmatically create General type DADs via a UNIX or DOS shell? We have numerous DADs to configure and maintain and being able to set this up so that it is scripted would be much easier.
We know that the enterprise manager updates the apache conf dads.conf file as part of the DAD creation but not sure if it is possible or safe to manually edit this file.
Any advice will be really helpful.
Cheers,
Leigh.

Sorry - I probably should have checked Oracle Support earlier but all the information I need is contained in the dads.README and dadTool.README files contained under the <ORACLE_MID_TIER_HOME>\Apache\modplsql\conf

Oracle 10gAS migration from Red Hat 4.0 SE to OEL 5.x

Hello Folks,
I am planning to migrate my Oracle 10gAS R2 (10.1.2.3) Infrastructure Tier on Server A (Red Hat 4) and
Middle Tier(Forms, Report, Discoverer) on Server B (Red Hat 4)
to Server C (Oracle Linux 5.7) and Server D (Oracle Linux 5.7) respectably.
Is it possible to use $OH/clone.pl in order to migrate Middle Tier?
I know that Infrastructure cannot be officially cloned
Is there any way to clone the infrastructure tier? ( or fresh install?)
However this is a just planning and I do not have any previous experience with this kind of migration
Would you guys please be able to give me an advice?
Any comments would be appreciated
Thanks in advance
Cheers,

What are the components you have in Infra ? If OID is installed in infra, thats not possible to clone. You would have to set up a new environment and copy users, groups,etc.
That's what I have done numerous time.
However, if you just have OC4J and OHS, you could think of cloning.
HTH,
Raj Mareddi

Call report from forms6i, use report server from 10gAS

Hi there,
I have been searching for any info I can get that will help me to do the following:
I want to call an Oracle 6i report from Forms6i but I want to specify a Report Server running on an Oracle10gAS box. Can this be done in a client/server fashion, meaning the forms/reports are on a Citrix box, accessed by many users.
Everything is working fine, using "RUN_PRODUCT" and the "Report Background Engine" to generate the report on the Citrix box. However, I want to use the report server from 10gAS runinng on another box, to generate these reports.
Please reply with any help you give.
Regards
shak

Hello,
You can use the compatible element in the reports server configuration file :
Description
The compatible element is available for backward compatibility with Oracle Reports 6i clients (RWCLI60.EXE, RWCGI60.EXE, RWQMU60.EXE, RWRQM60.EXE, RWRQV60.EXE, 6i Forms). When compatible is set to 6i, Reports Server will make use of an executable file named rwproxy that listens for requests from a 6i client and forwards them to a 10g server.
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_conf.htm#i1005999
Regards

Forms deployment in 10gAS(10.1.2.0.2)

hi all,
i want to deploy forms in new production system 10gAS(10.1.2.0.0) throught vendor portal. can anyone please provide me step by step information and any links or material on this. Thanks

1 Install IAS
2 Configure webcache
3 Configure formsweb.cfg
4 Configure tnsnames.ora
5 Configure registry.dat
6 Configure reports server
7 Configure cgicmd.dat
8 Update env variables for FORMS_PATH, REPORTS_PATH,.....

10gAS infrastructure and Oracle DB install

We have an ERP product just like Oracle eBusiness suite (Oracle Applications) built using Oracle DB, Forms, Discoverer, Reports, Portal etc. for small and midsize companies (very low foot print compared to Oracle eBusiness suite). Our product is deployed/installed at customer sites who buy the product. Most of our customers are small and they would have one box for 10gAS and one for DB.
Based on above, we are debating how to install infrastructure DB and our applications database…
1.     It is better to have the Infrastructure database on the same server as the Mid Tier as it installs by default? And then just connect to the application’s database on a separate database server (create a link from infrastructure to applications DB)?
2.     Should we put the Infrastructure instance on the Database Server in a separate instance from the application instance?
3.     Should we (or can we) put the Infrastructure in an instance on the database server and then add our application schema inside this same instance so we minimize the number of instances on the production database server.
Please suggest…

x86-64 is an extension of the x86 32-bit CISC instruction set. The 64-bit extension provides support for long mode to address larger virtual and physical address spaces.
You can generally run 32-bit applications on a x86_64 bit CPU and a x86_64 kernel, provided you have the appropriate i386 libraries installed. When you install Oracle 11gR2 11.2.0.1 for x86_64, appropriate i386 libraries are a prerequisite.
Since x86 on a x86_64 CPU is still hardware, there will be no performance penalty to run 32-bit application. Btw, you cannot run 64-bit applications using a i386 kernel. The only exception I know is Mac OS X.

DB and 10gAS infrastructure install...

Hello:
We have an ERP product just like Oracle eBusiness suite (Oracle Applications) built using Oracle DB, Forms, Discoverer, Reports, Portal etc. for small and midsize companies (very low foot print compared to Oracle eBusiness suite). Our product is deployed/installed at customer sites who buy the product. Most of our customers are small and they would have one box for 10gAS and one for DB.
Based on above, we are debating how to install infrastructure DB and our applications database…
1.     It is better to have the Infrastructure database on the same server as the Mid Tier as it installs by default? And then just connect to the application’s database on a separate database server (create a link from infrastructure to applications DB)?
2.     Should we put the Infrastructure instance on the Database Server in a separate instance from the application instance?
3.     Should we (or can we) put the Infrastructure in an instance on the database server and then add our application schema inside this same instance so we minimize the number of instances on the production database server.
Please suggest…

Based on experience working with Application Server since the 8iAS days, one can install it in a very complex spread out manner. Unfortunately, the complicated deployments are almost impossible to upgrade. When Service Requests are created, it seems that the upgrade process is only really tested on the simplest configuration. If you want a supportable/upgradeable configuration, you may want to consider the simplest configuration as long as performance is acceptable during normal day to day operations.
One caveat to putting the application schema in the infrastructure database is you limit your database upgrades/patches to only those supported by the application server family.

10gAS migartion

Similar Messages

Maybe you are looking for