10GB Ethernet options for px4-300r and px12-350r

Hello,
I see that third party vendors are listing a 10GB 2-port Ethernet upgrade for the px12-400r and px12-450r.   Will this also work in a px4-300r or the px12-350r?  Both units have the optional pci-express slots (1 on the px4, 3 on the px12) so it looks like the hardware is there.
Any thoughts?  I'd love to be able to put that kind of bandwidth in my px4 and px12 systems.
Thank you,
--Jeff

I just chatted with one of our level 3 agents and he said that the 10GB cards should work with the px rackmount devices. He did not have a part number though since it is fairly new and he had actually already asked our head office for it but is still waiting to hear back from them. I would recommend calling in if you need the part number or possibly asking the retailer/reseller that you bought the device from if they have it.
You can call this number as it is specific to our customers with px12 devices: 866-856-9898
or try our main tech support center: North America Contact Page — Network Storage   
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

Similar Messages

  • 10GB Ethernet Adapter for RD210 and RD220

    Hi together,
    i´m searching for a 10GB Ethernet Adapter for the RD210 and RD220 Servers.
    Is the Lenovo 10Gbps Ethernet X520-DA2 Server Adapter by Intel (0C19486)
    compatible?
    Thx and Greetings
    Andreas
    Solved!
    Go to Solution.

    Hi Andreas,
    I checked into this for you. Unfortunately, we do not provide any drivers for this adapter with the RD210/RD220. I can't say for certain that it won't work, just that Lenovo does not have drivers for the device for use with those servers.

  • I installed elements 12, it won't open, a screen pops up with options for e-12 and 4 other language

    I installed elements 12, it won't open, a screen pops up with options for e-12 and 4 other languages.  When I click Elements 12 a screen pops up with a red install icon, I click it and it askes for the serial number. It won't let me type in letters only numbers. I already did the serial number once. How do I get this to work? I don't want to be a programer!  

    attach a screenshot of what pops up after clicking pse 12, http://forums.adobe.com/thread/963429

  • Where in gods name is the homesharing button, I see a little cloud that you cannot click on and tells you what account you have but thats is. There's an option for turning on and off homesharing, but no button to access the actual library of the other PC

    Where in god’s name is the homesharing button, I see a little cloud that you cannot click on and tells you what account you have but that's it. There's an option for turning on and off homesharing, but no button to access the actual library of the other PC. On either PCs. Both are logged in and both are registered for homesharing. however because apple keeps updating and moving things around for no reason there appears to be no way of accessing the homsharing button in the latest version of itunes. the website refers to " Once set up, all the libraries from your computers you've enabled Home Sharing on will show up in the SHARED area of iTunes:" well I have searched all over in the recent itunes versions and there is no "shared area" to be found.
    Please find the attachment of a screen cap of my itunes.
    If anyone can help by telling me where it has been moved to or if it even still exists that would be much appreciated.

    Welcome to the Apple Community.

  • HT2589 My account is blocked out. I registered my account for Russia because there was no that option for Ukraine. And now I can't do any purchasing, because apple store want's another payment option. What should I do? Ps my friends here has such a proble

    My account is blocked out. I registered my account for Russia because there was no that option for Ukraine. And now I can't do any purchasing, because apple store want's another payment option. What should I do? I have many apps on my account but I can't do even updating.  Ps my friends here has such a problem too

    Ukraine is there. It's been there for a while. I even see it now.

  • Ethernet Share for Proxy Media AND Fiber for Original Media

    Ethernet Share for Proxy Media AND Fiber for Original Media...
    Is that possible?
    Ryan

    Our system isn't installed yet but we are following that model.  Fibre on all the mian editing systems and ethernet for the laptops.  The guys will use the proxies to edit from home on the laptops and then upload project and finish them off on the main systems

  • How to print a selection of pages from a 3000   page PDF without having to scroll two wheels! Also is there a way to set printer options for just black and white? Seems like there is a lot missing here?

    I have been using this for school work as much as possible and have come across a problem. With my lack of knowledge for apple it seems as though I can't navigate myself to a easy answer. The problem hits when I am printing pages off of a large document, and I don't want to print the entire document in color but I have no way "that I can find" for a black and white print option...
    ----- also a larger issue, when printing I need to select 1 page or even 20 pages... The time it takes to use a scroll wheel and the fact if you try and scroll fast sometimes you click off the screen then you have to start scrolling all over again... It seems like you would beagle to input from say page 1224 to 1236.... Instead I have a scroll a wheel? Just doesn't make sense...?
       Can someone please help solve this for me!

    Yes, that fixed it, thanks! I had no idea they clashed like that. I ruthlessly purged all other tables of contents, and then used Layout > Table of Contents to create a new one, and it worked.
    It made more sense after seeing in this thread that table of contents styles are more like presets or entities than styles.

  • Select Options for my program and i need to get the code from coding wizard

    Hi Experts,
    i am new to Webdynpro programming.
    i want to use Select-options in my component. and also please tell me how to use coding wizard,
    Please let me know if you need any information.
    Thanks in advance
    Lava.

    Hi Lava,
    To create select options we have to use the existing component WDR_SELECT_OPTIONS.
    For using this component in our WebDynpro component we need to specify this in used components tab in our WebDynpro component.
    check the standard components WDR_TEST_SELECT_OPTIONS .
    Also refer the following links.
    [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60811d03-b69e-2b10-cd86-ad2790e44ecc]
    Saptechnical->tutorials->webdynproabap->select options
    Regards,
    Radhika .

  • Windows Event Collector - Built-in options for load balancing and high availability ?

    Hello,
    I have a working collector. config is source initiated, and pushed by GPO.
    I would like to deploy a second collector for high availability and load balancing. What are the available options ? I have not found any guidance on TechNet articles.
    As a low cost option, is it fine to simply start using DNS round-robin with a common alias for both servers pushed as a collector name through GPO ?
    In my GPO Policy, if I individually declare both servers, events are forwarded twice, once for each server. Indeed it does cover high availability, but not really optimized.
    Thanks for your help.

    Hi,
    >>As a low cost option, is it fine to simply start using DNS round-robin with a common alias for both servers pushed as a collector name through GPO ?
    Based on the description, we can utilize DNS round robin to distribute workloads and increase fault tolerance. By default, DNS uses round robin to rotate the order of RR data returned in query answers where multiple RRs of the same type exist for a queried
    DNS domain name. This feature provides a simple method for load balancing client use of Web servers and other frequently queried multihomed computers. Besides, by default, DNS will perform round-robin rotation for all RR types.
    Regarding DNS round robin, the following article can be referred to for more information.
    Configuring round robin
    http://technet.microsoft.com/en-us/library/cc787484(v=ws.10).aspx
    TechNet Subscriber Support
    If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
    Best regards,
    Frank Shen

  • Select option for selection valid and invalid data.

    Hi All,
    Any one pleas help in validating following case :-
    In the selection screen there is a select option for equipment number like EQUI-EQUNR
    if any user will give wrong equipment no. It will generate an error message from the  range of equipment no.
    and put it to an internal table it error.
    and if any value in between the select option(equipment no) is correct then that value I need to proceed for some other logic.
    Iu2019d appreciate if some one help me in generation code for the above case or logic.
    Thanks

    Hi,
    Use FM 'RS_REFRESH_FROM_SELECTOPTIONS'
    DATA: RSPAR TYPE STANDARD TABLE OF RSPARAMS.
          REFRESH RSPAR.
          CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
              EXPORTING
                CURR_REPORT           = 'prog name'
        IMPORTING
          SP                    =
              TABLES
                SELECTION_TABLE       = RSPAR
             EXCEPTIONS
               NOT_FOUND             = 1
               NO_REPORT             = 2
               OTHERS                = 3.
          IF SY-SUBRC <> 0.
       MESSAGE I000.
          ENDIF.
    In table parameter you ll get the all entries entered .
    Check out the values with respective tables.If value is not correct tk it into internal table
    else proceed ahead. You can Remove incorrect entries this way.
    regards,
    ajit.

  • FCoE options for Cisco UCS and Compellent SAN

    Hi,
    We have a Dell Compellent SAN storage with iSCSI and FCoE module in pre-production environment.
    It is connected to new Cisco UCS infrastructure (5108 Chassis with 2208IOM + B200 M2 Blades + 6248 Fabric Interconnect) via 10G iSCSI module (FCoE module isn't being used at th is moment).
    I reviewed compatibility matrix on interconnect but Compellent (Dell) SAN is only supported on FI NXOS 1.3(1), 1.4(1) without using 6248 and 2208 IOM which is what we have. I'm sure some of you have similar hardware configuration as ours and I'd like to see if there's any supportive Cisco FC/FCoE deployment option for the Compellent. We're pretty tight on budget at this moment so purchasing couple of Nexus 5K switches or something equipvalent for such a small number of chassis (only only have one) is not a preferred option. If additional hardware acquisition is inevitable, what would be the most cost effective solution to be able to support FCoE implementation?
    Thank you in advance for your help on this.

    Unfortunatly there isn't really one - with direct attach storage there is still the requirement that an upstream MDS/N5k pushes the zoning to it.  Without a MDS to push the zoning the system it's recommended for production.
    http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/2.0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_0101.html#concept_05717B723C2746E1A9F6AB3A3FFA2C72
    Even if you had a MDS/N5K the 6248/2208's wouldn't support the Compellent SAN - see note 9.
    http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/interoperability/matrix/Matrix8.pdf
    That's not to say that it won't work, it's just that we haven't tested it and don't know what it will do and thus TAC cannot troubleshoot SAN errors on the UCS.
    On the plus side iSCSI if setup correctly can be very solid and can give you a great amount of throughput - just make sure to configure the QoS correctly and if you need more throughput then just add some additional links

  • MDT/WDS PXE Deployment - DHCP Options for both x64 and x86

    Alright, I've found out the option 66 & 67 information, as what to set for each. The problem I'm trying to figure out is what to use for the boot file for option 67. So far all the info I've found says this:
    Configure DHCP option 67 with the right boot image file.
    For 32-bits systems \boot\x86\wdsnbp.com
    For 64-bits systems \boot\x64\wdsnbp.com
    I want to be able to use this for both 32 and 64 bit Windows clients, but cannot find anywhere that specifies how I would be able to do both.

    DHCP Options (specifically 067) can have a significant impact on which NBP your client can access.  If you specify \Boot\x86\Wdsnbp.com you are forcing the client to the 32bit NBP.
    If you specify \Boot\x64\Wdsnbp.com you are forcing the client to the 64bit NBP.
    Niether option is an ideal solution, especially if you have a varied environment.
    I would take a look at the following article and see if it sheds some light on your question:
    PXE booting with WDS – DHCP Scope vs IP Helpers

  • What to do about Finder options for "all desktops" and "none" not working

    I have seen only one thread dealing with an issue similar, not identical, to mine.  Hope I'm not missing something obvious.
    I have experiment with the finder showing after upgrading to Lion.  I have consistently found that the show options of "all desktops" and in "none" needs to be altered after I re-boot.  If I have it as 'all desktops' it doesn't show unless I change it to "none."  If I have it set to "none" then I have to change it to "all desktops" or "this desktop" after re-booting.
    I even tried to reduce the number of desktops.  That didn't work.
    I tried deleting my finder preferences file and that hasn't worked.
    Is this a bug or do I need to do some other process?
    Thanks.

    Solved through applecare; had me delete all of my preferences and start over (with saving things like mail, dock settings).  Has worked fine for weeks.

  • Integration Option for SharePoint 2007 and Edge?

    Does this support Edge 3.1?  I know that in the official documentation for the Sharepoint 2007 PIK it never said Edge was supported, but I see posts indicating people have gotten it to work with Java InfoView.
    However, is Edge 3.1 supported for the larger Integration Option for SP2007?  Also, I assume it would be only for Java InfoView since Edge utilizes a WACS vs. standard .NET SDK.
    Please advise.
    Edited by: Jay Riddle on Oct 6, 2009 12:14 AM

    The newest release of the sharepoint kit called internally (ipoint) should work fine with java infoview. I haven't set this up my self and you may need to open an incident with support to verify if Edge supports the newest sharepoint kit.
    Regards,
    Tim

  • Too many options for cut, copy and paste

    I have recently removed version 29 which was installed without my permission and reverted to version 28, which was FAR better. I now have a number of right click options for highlight, cut, copy and paste from web pages. I don't see anywhere to attach screenshots but I have FOUR of them, all showing different options for highlight, cut, copy or paste and they are all ridiculous. What can I do to resolve this?
    Cheers.
    OK. Screenshots added.
    1) Dozens of options, of which only cut, copy, paste are needed for the highlighted text. The text is not a video, is not an audio file, is not a plugin, stupid to set as desktop, cannot be deleted.
    2) Highlighted text is NOT a link.
    3) Duh. No idea what this right click option is about.
    4) This is the only right click option I want. Unfortunately, it only appears about once in fifty right clicks.

    Do you mean names and passwords in the Password Manager or do you mean that you are no longer logged on to (remembered by) websites after closing and restarting Firefox?
    There is a difference between remembering the name and password in the Password Manager and a "remember me" check box on a web page to log you in automatically.
    The latter usually involves the creation of a special "remember me" cookie that is stored on your computer and that is send to the server.
    If this "remember me" cookie is removed or gets corrupted or is not send to the server then the server won't remember you and you will have to sign in once again.
    Details like websites remembering you (log you in automatically) are stored in a cookie.
    *Create a cookie 'allow' exception to keep such cookies, especially in case of secure websites and when cookies expire when Firefox is closed.
    *Tools > Options > Privacy > "Use custom settings for history" > Cookies: Exceptions
    In case you are using "Clear history when Firefox closes":
    *do not clear the Cookies
    *do not clear the Site Preferences
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
    *https://support.mozilla.org/kb/remove-browsing-search-and-download-history
    Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, passwords, and other website specific data.
    Clearing cookies will remove all specified (selected) cookies including cookies with an allow exception that you would like to keep.

Maybe you are looking for