10GBASE - LRM with Single Mode Cable
Dear Netpro community,
I have a problem with SFP+ module (10GBase - LRM) connecting to X2 module (10Gbase- LRM).
We are connecting the device using single mode cable but the switch interface doesnt going up.We tried to change the connector to X2 - LR but still doesnt going up.
However when we change the SFP+ module to LR and connect it to X2 - LR the interface is up.
Anyone have the similar issue?
Cisco state on the datasheet that LRM module support single mode on G.652 standard.
Please any comment are appreciated
Thanks
Imad
Dear Tom,
The length of SMF is under 100 meters, it connect from 7th floor to 9th floor. There are patch cord on each floor.
We have tested the connection by direct FO cable (single mode 2 meters) with SFP LRM-to-LRM and LRM-to-LR. Both the test are okay. So it means that the SFP is okay.
We'll check again with looping back the signal from our existing FO.
Thanks
Imad
Similar Messages
-
Remote Desktop Connection with single Ethernet cable
Hi,
I'd like to be able to use Microsoft's Remote Desktop Connection app to connect to one of my XP machines with my PowerBook. I can do this when everything is running on my home LAN, but I'd like to be able to connect with just a single Ethernet cable connected from my PowerBook's network port to the network card of the XP machine. This would allow me to use the PowerBook as a monitor when I bring the XP machine offsite to run tests (I'm a computer technician). I've played with the Network settings in the System Preferences, but things that would seem to me to work don't work. Any suggestions would be appreciated.
Thanks,
KenWhen you're on the road, and these are the only machines connected to each other, you will either need to configure them to have static IP's in the same subnet
192.168.0.2 and 192.168.0.3
255.255.255.0
no gateway/router IP required.
THey'll need to be in the same workgroup (but you probably have that already)
...or...
Configure the XP machine to be the DHCP server, and the mac to get IP from XP.
(first option is probably better.)
Might need a crossover cable. Might not. -
Library not loaded when osx start with single mode
Description:
Product:Mac mini
os:mac os x 10.7.5
step1. For app software testing,the follow files was moved from /usr/lib to / .
libcrypto0.9.7.dylb
libcrypto0.9.8.dylb
libcrypto.dylb
step2.restart os
Problem appear: the gray screen appear a long time with apple icon
step3.then, i restart machine to single mode by command+s
The note appear:
com.apple.launchd 1 com.apple.launchd 1 ***launchd[1] has started up.***
com.apple.launchd 1 com.apple.launchd 1 ***verbose boot,will log to /dev/console.***
dyld:library not loaded: /usr/lib/libcrypto.0.9.8.dylib
Referenced from:/System/Library/PrivateFrameworks/DataDetectorscore.Framework/Versions/A/D atadetectorscore
Reason:image not found
step4. i guess that problem would be fix when i recovery the files of above. then i log in recovery mode(hold Option before gray screen appear)
#use terminal ,copy file to its old position.
-bash-3.2# cp /Volumes/mac/libcrypto.0.9.8.dylib /Volumes/mac/usr/lib
#have not note found ,the command sentence is done! maybe its success!
restart to verify,work!
Hope this post could help someone! that's only .If you specify the (absolute) path then the profiles.ini file isn't used and installation scopes might be different.
*http://mike.kaply.com/2012/02/21/understanding-add-on-scopes/
*https://developer.mozilla.org/Addons/Add-on_Manager/AddonManager#Installation_scopes -
Transitioning to Single Mode Fiber
Hello,
We need to install new fiber to some new buildings in our school district. I want to be able to use current switches that I have in the old portable buildings that will be turned down this summer. My idea was to use Single Mode Fiber for these new buildings as long as the speed between the IDFS and MDFS is 1GB.
So I assume I need new transceivers ? Which ones will work with the models below mentioned?
My "Corebuilder" is WS-C4506 and my switches are 3750G 24 ports.I only need 6 transceivers, 3 for the WS-C4506 and three for 3 switches.
Eventually when we replace the switches then we'll go to 10GB but then I will need 10Gb transceivers but that will be another project for another day, I guess.
Any help will be much appreciated.We need to install new fiber to some new buildings in our school district. I want to be able to use current switches that I have in the old portable buildings that will be turned down this summer.
What is the distance of the single-mode cable?
My "Corebuilder" is WS-C4506 and my switches are 3750G 24 ports.I only need 6 transceivers, 3 for the WS-C4506 and three for 3 switches.
Part number is: GLC-LH-SMD
You will also need to get SM patch cords. -
Single mode fiber to Multimode SFP
Kindly check diagram..is it working in live environment?
two buildings connected with Single mode OFC...on both side LIU SC Connector (Single mode) -- On both end we have to connect Router/ Firewall - both have Multimode SFPs.Won't work.
If your fibre run is SM then your SFP on your firewall should be SM. -
SFP with LC connector to be used with SC single mode fiber termination (Cisco2960S)
Hi,
I have a question for a Cisco CATALYST WS-C2960S-24TS-L with SFP GLC-LH-SM (LC connector).
The problem is that we have an SC single mode fiber termination.
Is there any chance to provide with an SFP with SC connector. In case not, what alternatives do I have? Is there any Cisco recommended SC-LC converter/cable?
Thanks a lot for help,
DarioYou could get a fibre patch cable with LC terminal ends.
-
Is there a way to use a single bitmapdata for multiple images with GPU mode?
With GPU mode is there a way to bring in a single 1024 X 1024 png containing all my sprites and then slice it up into multiple display objects all refering to the original BitmapData?
I have an app that runs in GPU mode - but I want to optimize the image management.
I am making three sets of images in the orders of 2048, 1024 and 512 px.
The app is a book app and each page has around 4 to 5 bitmaps. I would like to bring in one single image and slice it up - but just refer to the original bitMapData in the memory.
Is there a way to do this - e.g. using a masking technique?
I think it is possible using textures in direct mode - but that is not an ideal solution for me - as the app is already in the appstore - and I would have to entirely refactor it for stage3D. Also I use very large bitmaps which have some masking animations applied to them dynamically: http://youtu.be/Nm0T1jLCTz8?t=42s
Currently, I use jpgs and a jpeg mask file for each image which I composite to get the alpha - then I scale them.
PNGs may be better for GPU - (no compositing) but they make for a huge app file.
Now I am converting it to use diffent sized assets depending on the device, then scaling them if need, and then compositing them for apha. What I was hoping was to find a technique that could reduce the number of bitmapdata objects used and reduce the operations in general.
Any thoughts on optimizing would be appreciated. I can add my code here if it helps.Tell Apple:
http://www.apple.com/feedback/iphone.html
We're all users here, just like you. -
Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated
Hello,
You need to put the Tiger Install Disc in the 2011 iMac, boot the 2011 uMac into Target mode...
http://support.apple.com/kb/HT1661
Boot the G4 holding the Option or alt key, hopefully the Install Disc in the 2011 iMac will show as a boot choice.
We just want to use the 2011 iMac as a big expensive FW Optical drive, it cannot be installed osing the 2011 iMac itself. -
Can this be done? Airport extreme connected wireless in extend mode to connect a wireless Mac Pro with an ethernet cable from the extended airport extreme.
This will work.....IF....you also have an Apple AirPort router configured to provide your wireless network.
In other words, you need to have two Apple AirPort routers to extend a wireless network.
When the AirPort Extreme is configured to "extend" the wireless of the "main" AirPort, it will provide more wireless coverage and the Ethernet ports are enabled, so you could connect your Mac Pro to any of the Ethernet ports and use that as a network and Internet connection. -
I have my new apple tv connected to my tv with an hdmi cable, but nothing appearing on the screen. any suggestions?
I just fixed mine by following the steps in this article http://www.xlr8yourmac.com/archives/aug14/080814.html
Basically, turn off file sharing, remote sharing etc... in apple preferences and it worked. Apple support didnt help and told me to take back the device ! I initially restarted, rebooted,reset apple tv, updated, unplugged everything including the router- unchecking the sharing boxes in preferences is the only thing that worked. -
Cisco 10GBASE X2 and Xenpak Modules- cable connection?
Which cable use for connection between Cisco X2-10GB-SR and Xenpak Modules or 10GBASE XENPAK and 10GBASE XENPAK (SMF or MMF) ?
Which cable use for connection between 10GBASE XENPAK and 10GBASE XENPAK (SMF or MMF) ?
I think it is MMF cable.
But my customer test SMF cable with 10GBASE XENPAK and 10GBASE XENPAK module, they see blue led of those module.
It happen with with one couple module; with another couple of module, it dont happen.
btw, I see this picture in cisco.com (Cisco 10GBASE X2 and Xenpak Modules.jpg), it has yellow cable in the picture.
As I know, yellow cable= SMF cable, orange cable= MMF cable. this thing make me confuse.
Thank you.Dear Tom,
The length of SMF is under 100 meters, it connect from 7th floor to 9th floor. There are patch cord on each floor.
We have tested the connection by direct FO cable (single mode 2 meters) with SFP LRM-to-LRM and LRM-to-LR. Both the test are okay. So it means that the SFP is okay.
We'll check again with looping back the signal from our existing FO.
Thanks
Imad -
10GBASE-LRM over OM-1 Fiber?
I would like information on implementing 10GBASE-LRM over OM-1 fiber.
Will this work to extend 10G to 3750 access switches from a Nexus 5000 series core switch? I am working with a hospital campus that has OM-1 (62.5 MM) between buildings. The standards state that 10GBASE-LRM can be used up to 220M (720 ft ) over OM-1 fiber.Thanks Paolo, I have recommended to the CIO of the hospital that the OM-1 fiber plant be characterized for modal bandwidth to make certain that it is in fact FDDI grade. The IEEE standard for 10GBASE-LRM states that the 220 meters is over OM-1 (62.5 um) fiber that is FDDI grade. Many legacy 62.5 um MM fibers did not meet this requirement.
What it confusing me is that the Cisco 3750 Access Switch Tech Specs list only the SM fiber SFP+ 10GBASE-LR GBIC's. There is no mention of it working with the modules that are used for 10GBASE-LRM GBICS. Or should I use the SM SPF+ 10G GIBC and a mode conditioning patch cord? If so what distance can be achieved using that method? Have you ever done this type of deployment before? -
I used to be able to just plug in my phone with the USB cable to my Windows 7 computer and browse phone storage with no issues. Now my computer sees it as an android phone but when it tries to automatically install the drivers for my phone on the computer, i get an access denied error message. No option on the phone that i can see that allows me to mount phone as a usb drive. This used to work just fine with nothing more than just hooking up the cable. What gives??
Let's get that access granted again, e_rock_b. The HTC DNA doesn't have a special USB Mass Storage Mode that needs to be turned on. Usually, it's as simple as connecting and browsing http://vz.to/1jktbZD as you mentioned. If your computer is no longer allowing that easy access, try the steps at http://vz.to/1jktvr6.
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport -
AP Tax Calculation issue with SINGLE TAX vs TAX GROUP
Hi Gurus,
i need your help on below, please advise!!
i have to calculate ap VAT tax on AP invoice,
(Rounding = nearest, precession=2, tax calcualtion= Include tax)
if i calculate 5% is the tax rate, then the tax amount is 0.47cents,this is in case of single tax calculation.
here my requirement was i need calculate 2 Taxes(TAX A AND TAX B (Rates are 5 AND 5%)
EG:
Invoce Base amount = 10 dollars
in case of single tax = 5/105 * 10 = 0.4761 cents(this is 48cents in apps with rouning nearest and precession 2)
tax mode = Include tax
In case of tax group = Tax A and Tax B = 5 + 5 = 10%, when i calculate this in apps its showing 45cents and 45 cents as tax A and B
why this tax caluclation is different with single tax and tax group.
tax code actual amount tax amount remaining amount
single tax 10 0.4761 10 - 0.48cents = 9.52 cents
tax group 10 45+45=90 cents 9.10 cents
Please Help !!!
Thanks,
SatishHi Vineeth,
This is Kathy from BSI Support. I wanted to make sure that you understood that the TF80 Like Reciprocal flag was made available in TF90 for testing purposes only. This was meant as a tool for customers to be able to compare their TF90 results to their TF80 output, to insure a successful upgrade. This funcitonality, however, was never intended to be utilized going forward. There have been significant changes implemented in BSI TaxFactory 9.0 regarding multi-state withholding (also known as reciprocity). There is information available on our website that explains these changes. If you log onto our website, please look under the "Whats New" section for an explanation of reciprocal functionality in BSI TaxFactoryu2122 9.0
If you have specific scenarios that you need help with, please contact us and we will be happy to assist you.
Regards,
BSI Support - Kathy -
SIP Trunk - No voice with Single Number Reach
Hi Community.
I setup SIP Trunk with the CCA. Everything is working Call In and Call Out. Call Forward and so on.
But with Single Number reach is something wrong. The mobile phone is ringing and I can get the call, but I hear not any voice.
Can someone please help me out? Below the config.
version 15.1
parser config cache interface
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service internal
service compress-config
service sequence-numbers
dot11 ssid cisco-data
vlan 1
authentication open
dot11 ssid cisco-voice
vlan 100
authentication open
ip source-route
ip cef
ip dhcp relay information trust-all
ip dhcp excluded-address 10.1.1.1 10.1.1.9
ip dhcp excluded-address 10.1.1.241 10.1.1.255
ip dhcp pool phone
network 10.1.1.0 255.255.255.0
default-router 10.1.1.1
option 150 ip 10.1.1.1
ip domain name site1.365873.trk.ipvoip.ch
ip name-server 8.8.8.8
ip inspect WAAS flush-timeout 10
ip inspect name SDM_LOW dns
ip inspect name SDM_LOW ftp
ip inspect name SDM_LOW h323
ip inspect name SDM_LOW https
ip inspect name SDM_LOW icmp
ip inspect name SDM_LOW imap
ip inspect name SDM_LOW pop3
ip inspect name SDM_LOW netshow
ip inspect name SDM_LOW rcmd
ip inspect name SDM_LOW realaudio
ip inspect name SDM_LOW rtsp
ip inspect name SDM_LOW esmtp
ip inspect name SDM_LOW sqlnet
ip inspect name SDM_LOW streamworks
ip inspect name SDM_LOW tftp
ip inspect name SDM_LOW tcp router-traffic
ip inspect name SDM_LOW udp router-traffic
ip inspect name SDM_LOW vdolive
no ipv6 cef
multilink bundle-name authenticated
stcapp ccm-group 1
stcapp
isdn switch-type basic-net3
voice call send-alert
voice rtp send-recv
voice service voip
ip address trusted list
ipv4 0.0.0.0 0.0.0.0
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
no supplementary-service sip refer
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw
sip
registrar server expires max 3600 min 3600
localhost dns:site1.365873.trk.ipvoip.ch
no update-callerid
voice class codec 1
codec preference 1 g711alaw
voice register global
mode cme
source-address 10.1.1.1 port 5060
load 9971 sip9971.9-2-2
load 9951 sip9951.9-2-2
load 8961 sip8961.9-2-2
timezone 23
voice source-group CCA_SIP_SOURCE_GROUP_CUE_CME
access-list 2
translation-profile incoming SIP_Incoming
voice source-group CCA_SIP_SOURCE_GROUP_EXTERNAL
access-list 3
voice translation-rule 9
rule 1 /0041449475090/ /90/
rule 2 /0041449475091/ /91/
rule 3 /0041449475092/ /92/
rule 4 /0041449475093/ /93/
rule 5 /0041449475094/ /94/
rule 6 /0041449475095/ /95/
rule 7 /0041449475096/ /96/
rule 8 /0041449475097/ /97/
rule 9 /0041449475098/ /98/
rule 10 /0041449475099/ /99/
voice translation-rule 410
rule 1 /^0\(.*\)/ /\1/
rule 15 /^..$/ /0041449475090/
voice translation-rule 411
rule 1 /^0\(.*\)/ /ABCD0\1/
voice translation-rule 412
rule 1 /^ABCD\(.*\)/ /\1/
voice translation-rule 422
rule 15 /^ABCD\(.*\)/ /\1/
voice translation-rule 1000
rule 1 /.*/ //
voice translation-rule 1111
rule 1 /^9\([1-9]\)$/ /004144947509\1/
rule 15 /^..$/ /0041449475090/
voice translation-rule 1112
rule 1 /^0/ //
voice translation-rule 2000
rule 1 /0041449475098/ /98/
voice translation-rule 2001
rule 1 /0041449475097/ /97/
voice translation-rule 2002
rule 1 /^6/ //
voice translation-rule 2222
voice translation-profile AA_Profile
translate called 2001
voice translation-profile CALLER_ID_TRANSLATION_PROFILE
translate calling 1111
voice translation-profile CallBlocking
translate called 2222
voice translation-profile OUTGOING_TRANSLATION_PROFILE
translate called 1112
voice translation-profile PSTN_CallForwarding
translate redirect-target 410
translate redirect-called 410
voice translation-profile PSTN_Outgoing
translate calling 1111
translate called 1112
translate redirect-target 410
translate redirect-called 410
voice translation-profile SIP_Called_9
translate calling 3265
translate called 9
voice translation-profile SIP_Incoming
translate called 411
voice translation-profile SIP_Passthrough
translate called 412
voice translation-profile SIP_Passthrough_CallBlocking
translate called 422
voice translation-profile VM_Profile
translate called 2000
voice translation-profile XFER_TO_VM_PROFILE
translate redirect-called 2002
voice translation-profile nondialable
translate called 1000
voice-card 0
dspfarm
dsp services dspfarm
fax interface-type fax-mail
license udi pid UC540W-BRI-K9 sn FGL163220SL
archive
log config
logging enable
logging size 600
hidekeys
username admin privilege 15 secret xxx
username xxx password 0 ""
username xxx password 0 ""
ip tftp source-interface Loopback0
bridge irb
interface Loopback0
description $FW_INSIDE$
ip address 10.1.10.2 255.255.255.252
ip access-group 101 in
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/0
description $FW_OUTSIDE$
no ip address
ip inspect SDM_LOW out
ip virtual-reassembly in
ip verify unicast reverse-path
load-interval 30
shutdown
duplex auto
speed auto
interface Integrated-Service-Engine0/0
description cue is initialized with default IMAP group
ip unnumbered Loopback0
ip nat inside
ip virtual-reassembly in
service-module ip address 10.1.10.1 255.255.255.252
service-module ip default-gateway 10.1.10.2
interface FastEthernet0/1/0
no ip address
macro description cisco-desktop
spanning-tree portfast
interface FastEthernet0/1/1
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/2
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/3
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/4
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/5
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/6
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/7
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/8
no ip address
macro description cisco-desktop
spanning-tree portfast
interface BRI0/1/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn sending-complete
isdn static-tei 0
interface BRI0/1/1
no ip address
shutdown
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn sending-complete
isdn static-tei 0
interface Dot11Radio0/5/0
no ip address
ssid cisco-data
ssid cisco-voice
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
antenna receive right
antenna transmit right
interface Dot11Radio0/5/0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0/5/0.100
encapsulation dot1Q 100
bridge-group 100
bridge-group 100 subscriber-loop-control
bridge-group 100 spanning-disabled
bridge-group 100 block-unknown-source
no bridge-group 100 source-learning
no bridge-group 100 unicast-flooding
interface Vlan1
no ip address
bridge-group 1
bridge-group 1 spanning-disabled
interface Vlan100
no ip address
bridge-group 100
bridge-group 100 spanning-disabled
interface BVI1
description $FW_INSIDE$
ip address 192.168.10.2 255.255.255.0
ip access-group 102 in
ip nat inside
ip virtual-reassembly in
interface BVI100
description $FW_INSIDE$
ip address 10.1.1.1 255.255.255.0
ip access-group 103 in
ip nat inside
ip virtual-reassembly in
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http path flash:/gui
ip dns server
ip nat inside source list 1 interface FastEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 192.168.10.1
ip route 10.1.10.1 255.255.255.255 Integrated-Service-Engine0/0
access-list 1 remark SDM_ACL Category=2
access-list 1 permit 10.1.1.0 0.0.0.255
access-list 1 permit 192.168.10.0 0.0.0.255
access-list 1 permit 10.1.10.0 0.0.0.3
access-list 2 remark CCA_SIP_SOURCE_GROUP_ACL_INTERNAL
access-list 2 remark SDM_ACL Category=1
access-list 2 permit 192.168.10.2
access-list 2 permit 10.1.10.0 0.0.0.3
access-list 2 permit 192.168.10.0 0.0.0.255
access-list 2 permit 10.1.1.0 0.0.0.255
access-list 3 remark CCA_SIP_SOURCE_GROUP_ACL_EXTERNAL
access-list 3 remark SDM_ACL Category=1
access-list 3 permit 212.147.47.216
access-list 3 deny any
access-list 100 remark auto generated by SDM firewall configuration
access-list 100 remark SDM_ACL Category=1
access-list 100 deny ip 192.168.10.0 0.0.0.255 any
access-list 100 deny ip host 255.255.255.255 any
access-list 100 deny ip 127.0.0.0 0.255.255.255 any
access-list 100 permit ip any any
access-list 101 remark auto generated by SDM firewall configuration##NO_ACES_8##
access-list 101 remark SDM_ACL Category=1
access-list 101 permit tcp 10.1.1.0 0.0.0.255 eq 2000 any
access-list 101 permit udp 10.1.1.0 0.0.0.255 eq 2000 any
access-list 101 deny ip 10.1.1.0 0.0.0.255 any
access-list 101 deny ip 192.168.10.0 0.0.0.255 any
access-list 101 deny ip 192.168.1.0 0.0.0.255 any
access-list 101 deny ip host 255.255.255.255 any
access-list 101 deny ip 127.0.0.0 0.255.255.255 any
access-list 101 permit ip any any
access-list 102 remark auto generated by SDM firewall configuration##NO_ACES_6##
access-list 102 remark SDM_ACL Category=1
access-list 102 deny ip 10.1.10.0 0.0.0.3 any
access-list 102 deny ip 10.1.1.0 0.0.0.255 any
access-list 102 deny ip 192.168.1.0 0.0.0.255 any
access-list 102 deny ip host 255.255.255.255 any
access-list 102 deny ip 127.0.0.0 0.255.255.255 any
access-list 102 permit ip any any
access-list 103 remark auto generated by SDM firewall configuration##NO_ACES_8##
access-list 103 remark SDM_ACL Category=1
access-list 103 permit tcp 10.1.10.0 0.0.0.3 any eq 2000
access-list 103 permit udp 10.1.10.0 0.0.0.3 any eq 2000
access-list 103 deny ip 10.1.10.0 0.0.0.3 any
access-list 103 deny ip 192.168.10.0 0.0.0.255 any
access-list 103 deny ip 192.168.1.0 0.0.0.255 any
access-list 103 deny ip host 255.255.255.255 any
access-list 103 deny ip 127.0.0.0 0.255.255.255 any
access-list 103 permit ip any any
access-list 104 remark auto generated by SDM firewall configuration##NO_ACES_14##
access-list 104 remark SDM_ACL Category=1
access-list 104 deny ip 10.1.10.0 0.0.0.3 any
access-list 104 deny ip 10.1.1.0 0.0.0.255 any
access-list 104 permit ip any any
access-list 104 permit udp host 8.8.8.8 eq domain any
access-list 104 permit icmp any any echo-reply
access-list 104 permit icmp any any time-exceeded
access-list 104 permit icmp any any unreachable
access-list 104 deny ip 10.0.0.0 0.255.255.255 any
access-list 104 deny ip 172.16.0.0 0.15.255.255 any
access-list 104 deny ip 192.168.0.0 0.0.255.255 any
access-list 104 deny ip 127.0.0.0 0.255.255.255 any
access-list 104 deny ip host 255.255.255.255 any
access-list 104 deny ip host 0.0.0.0 any
access-list 104 deny ip any any
control-plane
bridge 1 route ip
bridge 100 route ip
voice-port 0/0/0
cptone CH
station-id name FAX
station-id number 99
caller-id enable
voice-port 0/0/1
cptone CH
shutdown
caller-id enable
voice-port 0/0/2
cptone CH
shutdown
caller-id enable
voice-port 0/0/3
cptone CH
shutdown
caller-id enable
voice-port 0/1/0
compand-type a-law
cptone CH
bearer-cap Speech
voice-port 0/1/1
compand-type a-law
cptone CH
bearer-cap Speech
voice-port 0/4/0
auto-cut-through
signal immediate
input gain auto-control -15
description Music On Hold Port
sccp local Loopback0
sccp ccm 10.1.1.1 identifier 1 version 4.0
sccp
sccp ccm group 1
associate ccm 1 priority 1
associate profile 2 register mtpa4934c6ee4e0
dspfarm profile 2 transcode
description CCA transcoding for SIP Trunk VTX
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
maximum sessions 10
associate application SCCP
dial-peer cor custom
name internal
name local
name local-plus
name international
name national
name national-plus
name emergency
name toll-free
dial-peer cor list call-internal
member internal
dial-peer cor list call-local
member local
dial-peer cor list call-local-plus
member local-plus
dial-peer cor list call-national
member national
dial-peer cor list call-national-plus
member national-plus
dial-peer cor list call-international
member international
dial-peer cor list call-emergency
member emergency
dial-peer cor list call-toll-free
member toll-free
dial-peer cor list user-internal
member internal
member emergency
dial-peer cor list user-local
member internal
member local
member emergency
member toll-free
dial-peer cor list user-local-plus
member internal
member local
member local-plus
member emergency
member toll-free
dial-peer cor list user-national
member internal
member local
member local-plus
member national
member emergency
member toll-free
dial-peer cor list user-national-plus
member internal
member local
member local-plus
member national
member national-plus
member emergency
member toll-free
dial-peer cor list user-international
member internal
member local
member local-plus
member international
member national
member national-plus
member emergency
member toll-free
dial-peer voice 1 pots
destination-pattern 99
port 0/0/0
no sip-register
dial-peer voice 2 pots
port 0/0/1
no sip-register
dial-peer voice 3 pots
port 0/0/2
no sip-register
dial-peer voice 4 pots
port 0/0/3
no sip-register
dial-peer voice 5 pots
description ** MOH Port **
destination-pattern ABC
port 0/4/0
no sip-register
dial-peer voice 6 pots
description tcatch all dial peer for BRI/PRIv
translation-profile incoming nondialable
incoming called-number .%
direct-inward-dial
dial-peer voice 50 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
direct-inward-dial
port 0/1/0
dial-peer voice 51 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
direct-inward-dial
port 0/1/1
dial-peer voice 2000 voip
description ** cue voicemail pilot number **
translation-profile outgoing XFER_TO_VM_PROFILE
destination-pattern 98
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 2001 voip
description ** cue auto attendant number **
translation-profile outgoing PSTN_CallForwarding
destination-pattern 97
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 2012 voip
description ** cue prompt manager number **
translation-profile outgoing PSTN_CallForwarding
destination-pattern 96
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 1000 voip
permission term
description ** Incoming call from SIP trunk (VTX) **
session protocol sipv2
session target sip-server
incoming called-number .%
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
fax rate 14400
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1001 voip
corlist outgoing call-local
description ** star code to SIP trunk (VTX) **
destination-pattern *..
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
fax rate 14400
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1003 voip
description ** Passthrough Inbound Calls for PSTN from CUE **
translation-profile incoming SIP_Passthrough
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
incoming called-number ABCDT
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 1005 voip
description ** Passthrough Inbound Calls for MWI from CUE **
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
incoming called-number A80T
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 1009 voip
description ** Passthrough Inbound Calls for Internal Extensions from CUE **
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
incoming called-number ^..$
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 1033 voip
corlist outgoing call-local
description **CCA*Switzerland*Short Code Services**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 0187
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1042 voip
corlist outgoing call-emergency
description **CCA*Switzerland*Ambulance / Poisioning**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 0014[45]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1041 voip
corlist outgoing call-emergency
description **CCA*Switzerland*REGA Air Rescue**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 00333333333
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1025 voip
corlist outgoing call-national
description **CCA*Switzerland*National Destination Numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00[789]1.......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1020 voip
corlist outgoing call-national
description **CCA*Switzerland*Regional Announcement VM**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 01600
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1040 voip
corlist outgoing call-emergency
description **CCA*Switzerland*REGA Air Rescue**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 000333333333
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1043 voip
corlist outgoing call-emergency
description **CCA*Switzerland*Ambulance / Poisioning**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 014[45]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1035 voip
corlist outgoing call-national
description **CCA*Switzerland*Mobile Numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 007[46789].......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1024 voip
corlist outgoing call-national-plus
description **CCA*Switzerland*Personal Numbering**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00878......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1029 voip
corlist outgoing call-national
description **CCA*Switzerland*Voicemail Access**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00860.........
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1036 voip
corlist outgoing call-national
description **CCA*Switzerland*VPN Access**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00869.............
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1027 voip
corlist outgoing call-national-plus
description **CCA*Switzerland*Premium Rate (Business)**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00900......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1026 voip
corlist outgoing call-national
description **CCA*Switzerland*Test Numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00868T
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1034 voip
corlist outgoing call-national-plus
description **CCA*Switzerland*Shared Cost numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 0084[0248]......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1038 voip
corlist outgoing call-emergency
description **CCA*Switzerland*Emergency**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 0011[278]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1037 voip
corlist outgoing call-toll-free
description **CCA*Switzerland*Toll Free Numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00800......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1039 voip
corlist outgoing call-emergency
description **CCA*Switzerland*Emergency**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 011[278]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1032 voip
corlist outgoing call-national
description **CCA*Switzerland*National Destination Numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00[23456]........
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1023 voip
corlist outgoing call-international
description **CCA*Switzerland*International Calls**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 000T
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1031 voip
description **CCA*Switzerland*Premium Rate (Social)**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 0090[16]......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1030 voip
corlist outgoing call-national
description **CCA*Switzerland*Short Code**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 014[0357]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1045 voip
corlist outgoing call-emergency
description **CCA*Switzerland*REGA/Glaciers Air Rescue**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 0141[45]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1028 voip
corlist outgoing call-national-plus
description **CCA*Switzerland*Directory Enquiries**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 018[15].
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1021 voip
corlist outgoing call-national
description **CCA*Switzerland*Short Code**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 011[45].
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1022 voip
corlist outgoing call-national
description **CCA*Switzerland*Short Code Services**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 01[67].
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1044 voip
corlist outgoing call-emergency
description **CCA*Switzerland*REGA/Glaciers Air Rescue**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 00141[45]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 2002 voip
description ** cue voicemail PSTN number **
translation-profile outgoing VM_Profile
destination-pattern xxx$
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 2003 voip
description ** cue auto attendant PSTN number **
translation-profile outgoing AA_Profile
destination-pattern xxx$
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 1110 pots
preference 9
destination-pattern xxx
port 0/0/0
no sip-register
dial-peer voice 3006 voip
description SIP
translation-profile incoming SIP_Called_9
session protocol sipv2
session target sip-server
incoming called-number xxx.
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
no dial-peer outbound status-check pots
sip-ua
keepalive target dns:site1.365873.trk.ipvoip.ch
authentication username xxx password 7 xxx
no remote-party-id
retry invite 2
retry register 10
timers connect 100
timers keepalive active 100
registrar dns:site1.365873.trk.ipvoip.ch expires 3600
sip-server dns:site1.365873.trk.ipvoip.ch
host-registrar
telephony-service
sdspfarm units 5
sdspfarm transcode sessions 10
sdspfarm tag 2 mtpa4934c6ee4e0
video
fxo hook-flash
max-ephones 40
max-dn 300
ip source-address 10.1.1.1 port 2000
auto assign 1 to 1 type bri
calling-number initiator
service phone videoCapability 1
service phone ehookenable 1
service phone ehookEnable 1
service dnis overlay
service dnis dir-lookup
service dss
timeouts interdigit 5
system message SwissT.Net
url services http://10.1.10.1/voiceview/common/login.do
url authentication http://10.1.10.1/voiceview/authentication/authenticate.do
cnf-file location flash:
cnf-file perphone
user-locale U4 load CME-locale-de_DE-German-8.1.2.2.tar
network-locale U4
load 521G-524G cp524g-8-1-17
load 525G spa525g-7-5-4
load 501G spa50x-30x-7-5-2b
load 502G spa50x-30x-7-5-2b
load 504G spa50x-30x-7-5-2b
load 508G spa50x-30x-7-5-2b
load 509G spa50x-30x-7-5-2b
load 525G2 spa525g-7-5-4
load 301 spa50x-30x-7-5-2b
load 303 spa50x-30x-7-5-2b
time-zone 23
time-format 24
date-format dd-mm-yy
keepalive 30 auxiliary 4
voicemail 98
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
hunt-group logout HLog
moh flash:/media/music-on-hold.au
multicast moh 239.10.16.16 port 2000
web admin system name cisco secret 5 xxx
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern .T
transfer-pattern 0.T
transfer-pattern 6.. blind
secondary-dialtone 0
night-service day Sun 17:00 09:00
night-service day Mon 17:00 09:00
night-service day Tue 17:00 09:00
night-service day Wed 17:00 09:00
night-service day Thu 17:00 09:00
night-service day Fri 17:00 09:00
night-service day Sat 17:00 09:00
fac standard
create cnf-files version-stamp Jan 01 2002 00:00:00
ephone-template 1
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
service phone webAccess 0
softkeys remote-in-use Newcall
softkeys idle Redial Pickup Mobility Newcall Cfwdall Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Trnsfer Mobility TrnsfVM Confrn Acct Park
button-layout 7931 2
ephone-template 15
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use Newcall
softkeys idle Redial Newcall Mobility Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Mobility Trnsfer TrnsfVM Confrn Acct Park
button-layout 7931 2
ephone-template 16
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use Newcall
softkeys idle Redial Newcall Mobility Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Mobility Trnsfer TrnsfVM Confrn Acct Park
ephone-template 17
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use CBarge Newcall
softkeys idle Redial Newcall Mobility Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Mobility Trnsfer TrnsfVM Confrn Acct Park
ephone-template 18
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use CBarge Newcall
softkeys idle Redial Newcall Mobility Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Mobility Trnsfer TrnsfVM Confrn Acct Park
button-layout 7931 2
ephone-dn 9
number BCD no-reg primary
description MoH
moh out-call ABC
ephone-dn 292
number xxx
description SIP Main Number registration
preference 10
ephone-dn 293 dual-line
number 90 secondary xxx no-reg both
label Zentrale
description 90
name Zentrale
call-forward busy 98
call-forward noan 98 timeout 20
ephone-dn 294 dual-line
number 94 secondary xxx no-reg both
label LL
description Lehrling Lehrnende
name Lehrling Lehrnende
mobility
snr xxx delay 1 timeout 30 cfwd-noan 98
snr ring-stop
call-forward busy 98
call-forward noan 98 timeout 20
ephone-dn 295 dual-line
number 93 secondary xxx no-reg both
label CM
description
name
snr xxx delay 1 timeout 30 cfwd-noan 98
snr ring-stop
call-forward busy 98
call-forward noan 98 timeout 10
ephone-dn 296 dual-line
number 92 secondary xxx no-reg both
label EE
description
name
mobility
call-forward busy 98
call-forward noan 98 timeout 20
ephone-dn 297 dual-line
number 91 secondary xxx no-reg both
label RS
description
name
mobility
snr xxx delay 1 timeout 30 cfwd-noan 98
snr ring-stop
call-forward busy 98
call-forward noan 98 timeout 10
ephone-dn 298
number 6.. no-reg primary
description ***CCA XFER TO VM EXTENSION***
call-forward all 98
ephone-dn 299
number A801.. no-reg primary
mwi off
ephone-dn 300
number A800.. no-reg primary
mwi on
ephone 1
device-security-mode none
mac-address A44C.11A0.B648
ephone-template 1
max-calls-per-button 2
username "xxx" password xxx
type 525G2
button 1:296 2:293 3m297 4m295
button 5m294
ephone 2
device-security-mode none
mac-address A44C.11A0.B566
ephone-template 1
max-calls-per-button 2
username "xxx" password xxx
type 525G2
button 1:297 2:293 3m296 4m295
button 5m294
ephone 3
device-security-mode none
mac-address A44C.11A0.B5C4
ephone-template 1
max-calls-per-button 2
username "xxx" password xxx
type 525G2
button 1:295 2:293 3m297 4m296
button 5m294
ephone 4
device-security-mode none
mac-address A44C.11A0.B67A
ephone-template 1
max-calls-per-button 2
username "xxx" password xxx
type 525G2
button 1:294 2:293 3m297 4m296
button 5m295
alias exec cca_voice_mode PBX
alias exec cca_vm_notification schedule from_time=00 to_time=24
alias exec clid-ALL_BRI ;1:0-4;1:0-9;1:0-9;1:1-9
alias exec clid-SIP ;1:1-9;1:1-9;1:1-9
banner login ^CCisco Configuration Assistant. Version: 3.2 (3). Fri Jul 04 13:18:33 CEST 2014^C
line con 0
no modem enable
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 0 4
transport preferred none
transport input all
line vty 5 100
transport preferred none
transport input all
ntp master
ntp server 91.240.0.5 prefer
enHi Patrick
I am working on this one as well. I have a UC560 with SIP Trunk provider Les.NET.
It was working fine until a few weeks ago when something changed on the provider end and broke it. My hunch it is something to do with the SIP REFER.
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-express/91535-cme-sip-trunking-config.html
Here is an excerpt from the above page:
Call Transfer
When a call comes in on an SIP trunk to an SCCP Phone or CUE AutoAttendant (AA) and is transferred, the CME by default will send a SIP REFER message to the SP proxy. Most SP Proxy Servers do not support the REFER method. This needs to be configured in order to force the CME to hairpin the call:
Router(config)#voice service voip
Router(conf-voi-serv)#no supplementary-service sip refer
Figure 3 shows the behavior of the CME system with the REFER method disabled.
Maybe you are looking for
-
How do I install lesson files without a disk drive?
I just bought a new iMac. It does not have a disk drive. How do I install Adobe Photoshop Classroom in a Book Lesson files?
-
Can you sell your ipod back to apple ?
I want to sell my ipod touch 4th generation , 8g. so that i can get an iphone
-
Exchange rate in Import PO-GR ..?
hi all I have created imported PO with exchange X before 2 months . Now I m have done GR for that imoport PO, In my Exchange rate master I have maintained Y as exchange rate. My query is while doing GR in which exchange it'll generate the account doc
-
How can I get an h:message tag to display an icon?
I'm trying to display an image instead of text <h:message binding="#{XXX.yyy}" errorClass="errorIcon" fatalClass="fatalMessage" for="zzz" id="xxxxMessage" infoClass="infoMessage" sho
-
Hi experts, for a modified FX calculation I need the scanned month value and the corresponding FX rate. This is well handled by the LOOKUP command of Script Logic. In addition I need the prior month value and the corresponding prior month FX rate. I