10gR2 Clusterware Install on Windows 2003 SP2 after Patch 10.2.0.4 crash
After fresh installaion 10g R2 clusterware and db on Windows 2003 (x64) sp2.->>Works well
Install Patch 10.2.0.4 -->>Tnserror and other error as write in metalink (February 2010 Patch 32)
--Remove all oracle files (c:\programfiles\oracle\*.*,d:\oracle\*.*,c:\windows\system32\drivers\o???.dll ),
--all registery,all GUIOracleOBJManager.exe partition,
--all system enviroment,
--all c:\temp and c:\windows\temp and c:\localseting\???\temp from both system.
But with new installation 10gR2 Clusterware error on second machine D:\oracle\product\10.2.0\crs\log\rac2\evmd\evmd.log below
2010-02-12 11:48:10.171: [ EVMD][2716]32Daemon Version: 10.2.0.1.0 Active Version: 10.2.0.4.0
2010-02-12 11:48:10.171: [ EVMD][2716]32Exiting, Active Version greater than Software Version
2010-02-12 11:48:10.171: [ EVMD][2716]32EVMD exiting: Version Compatibility check failed
My question how can i clear all installation Oracle 10gR2 with patch 10.2.4. from windows 2003
I solved my problem.
Solution dont forget to clean all ocr and voting disk using storage software .Oracle clean log utility does not clean all data or other things in disk volumes.
You must use storage clean utlity or rebuild your volume in storage software.
Thanks
Similar Messages
-
Hello all,
I need to someone's help.
I just installed Oracle After 9i (9.2.0.1)Install on Windows 2003.
I can only login using scott/tiger.
cannot login as sys/sysdba/system
I used Oracle dtabase Configuration Assistant. At the last step it asked me if I want to change sys and system passwords, I did. However, I cannot verify if system took those. The default combinations system/manager sys/change_on_install are not working.
As well as my new passwords.
How can I resolve it?
Thank you in advance,
SonyaRecall what you used and you should be able to login .
OR
On windows create new password for sys user. This should work for you since you are on windows OS
back up the file in you ORACLE_HOME/database/PWD<SID>.ora
Create a new one using
orapwd file=...database/PWD<sid>.ora password=<new password> entries=5
stop the oracleService<SID>
start the oracleService<SID>
sqlplus /nolog
connect sys as sysdba
Enter password: <new password>
You should be able to login with this new password created
Ss -
I have 3 Windows 2003 SP2 servers running IIS 6.0 and my client wants to upgrade to IIS 7.5 without having to upgrade the OS to Windows 2008 R2. Is this possible?
ThanksNo I'm afraid not. The full versions of IIS depend on the OS, so IIS6 on 2003, IIS7 on 2008, IIS7.5 on 2008 R2.
The Express version of IIS can be installed on 2003 but that's for developers only so no use in your situation.
Also worth nothing in terms of upgrading, unless your 2003 installation is 64-bit then you can only do an in place upgrade to 2008 IIS7. There's no 32-bit option with 2008 R2, and no way to do an in place upgrade between 32-bit and 64-bit, so if you really
need to upgrade to IIS 7.5 then your only option would be to start with a new install and then migrate the websites from one server to another. -
Can oracle discoverer 10 be installed on Windows 2003 server
Hi,
I have couple of queries related to Oracle Discoverer. Need help urgently.
1. Can Oracle Discoverer 4.1 version support Windows 2003 on which Citrix server version 4 or above is installed? If yes, please let me know the patch details to download the same.
2. Can Oracle 10g BI Tool, Oracle Discoverer Administrator and Desktop be installed on Windows 2003 Server Operating System on which Citrix server version 4 or above be installed?
Thanks in advance.
Regards,
Rajesh GurramHi,
1. Discoverer 4.1 has been desupported but was only certified for Windows 200 and XP
2. Discoverer Desktop and Admin is support on Windows 2003:
2003 SP1+ 10g (10.1.2.0.2 )
One thing I have to mentioned is that Oracle does not support any Citrix client operations.
If ever you encounter a problem you will need to reproduce the problem
outside of the Citrix environment to prove that it is not the cause of the problem.
Regards
Roelie Viviers -
Error When Finish the Install on Windows 2003
When finish the install on Windows 2003 Server the last check list Oracle Audit Vault Asistant send error:
avca.bat initialize_av -crtscma N -avsysdba ${s_avsysdba} -avadm ${s_avadm} ${s_avauditor} -dvowner ${s_dvownerarg} ${s_dvacctmgr} -jdbc_str jdbc:oracle:oci:@av -dbalias av -sid av -avconsoleport 5700
dont run command.
which i can do. thanks for the helpHi, Pankaj,
i encountered same problem as you did.
please could you elaborate how you resolve the problem "by passing oracle_sid at cmmond prompt and then starting the database, before that check listner is running or not , if not start listner"
many thanks,
lee -
11.1.0.1.0 GC certification with Windows 2003 SP2
The certification guide shows GC 11.1.0.1.0 certified for Windows Server 2008, Windows Server 2003 R2; Windows 2003 (32 bit) with SP2/R2+, Windows7
Confirmation required is GC 11.1.0.1.0 is also certified for Windows 2003 SP2 or we require Win 2003 R2 minIts certified on 2003 SP2 as well.
-
Sun X4150 Can not install Microsoft Window 2003 Standard 32-bit OS
I have try to install Microsoft Window 2003 Standard 32-bit OS in X4150,but put the OS Media and the output show below error messages
"The system is not a supported platform"
I check the sun system handbook and releated document for this X4150 product,it have been certificated.
I try to install with Window 2003 Standard 64-bit OS,it work ok.The Window 2003 Enterprise 32/64 bit,it work ok also.
Have change the CPU Speed (lower),Update the BIOS,ELOM,the same situration.
Have anyone have this experience with the installation of window 2003 Standard 32-bit.
Tks for your help.Hi,
Have you tried installing using the Sun Installation Assistant disc, for more info see the Sun Installation Assistant for Windows and Linux User's Guide:
http://docs.sun.com/app/docs/coll/x4150 -
RDP Hotfix for Windows 2003 SP2
What is the latest RDP hotfix for Windows 2003 SP2, we are having issues when we want the server to reboot and it just hangs. I remember that there was an hotfix for this issue. Our workaround is to use a remote shutdown command.
I believe they was an post-SP2 that kinda of helped in most cases.
Thanks in advance.Hi,
Based on my search, the following articles will give you a hand:
Recommended hotfixes for Windows Server 2003 Service Pack 2-based server clusters
http://support.microsoft.com/kb/935640
Certain Windows Server 2003 hotfixes have been repackaged to be compatible with Windows Server 2003 Service Pack 2 (SP2)
http://support.microsoft.com/kb/932132
Meanwhile, I would require to analyze the cause of the unresponsiveness.
How To Troubleshoot Shutdown Problems in Windows Server 2003
http://support.microsoft.com/kb/324268
Sometimes, the clean-boot (MSCONFIG) will helps you to isolate the issue that might be caused by the third party software.
Thanks. -
Iphone 5 S can't get sync with itunes installed on windows 2003 server SP2
After successfully installed itunes 11.1.5 for windows (i'm using windows 2003 server SP2 32bit). Whenever time I connect my iphone 5S to this computer, it always pops up an error message "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install iTunes again"
After I uninstalled/reinstalled many times I got successful install iTunes software, but this still having problem with this error message. When I open iTunes application and plug my iPhone 5S it always show the above error message & on iTunes application --> Files --> Devices I couldn't see any devices available (i.e Syns option is faded out & not clickable)Hi Tolga,
You face with this error, because of Trex installation package is trying to install native i386 redistributables (vcredist_x86.msi) during the process. In order to patch Trex system on x64 architecture, follow the instructions, below;
1) Start sapinst, under your <TREX_PATCH> path
2) Ignore AMD64 warning popup
3) When popup appears on the "1603:Fatal error during installation." error, change temp folders on both environment variables, on my computer
4) Download and execute "vcredist_x64.exe" then run installer
5) After respective installation click on "Retry" button on error popup
At the end of this operation, your Trex patch will be succeeded. Please do not forget to undo your temp directory settings, on your Trex host. I hope that it is clarify your question.
Best regards,
Orkun Gedik
Senior SAP Development And Basis Consultant -
HP Officejet Pro 8610 will not install on Windows 2003 Server 32 bit.
When installing the 8610 with the disk, at the end it states and error occurred during the installation of the device. The specified module could not be found.
When I install using the downloaded drivers, after the files extract and the program connects to the printer, when I hit Continue a screen pops up and states the operating system of this computer is not supported... even though the 2003 Windows server is on the list. Is there anything I can do to install the drivers? All I need is basic printing . I'm about ready to pack it up and return it... which means the other printers will have to be returned because I like them all to be the same.
Please help.Hi,
Follow the steps below to install the software using an MSIEXEC command, the installation should not be done using the installer as any clieant operating system.
The steps below are also applicable for installing the 8610 on a server OS:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03351547&lc=en&product=5367608&tmp...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Oracle Express 10g - cannot install on Windows 2003
I'm trying to install Oracle Express 10g on Windows 2003. On this machine already works MS SQL2005 server.
The installation starts ok but after copying files installer disappears whitout any message (in that moment an icon on desktop should be created, but it's not) All files copied first by installer are deleted upon it finishes it's work. From the same package I installed Express on Windows XP and then there was everything ok.
I checked install log but it didn't tell me much. It looks more or less the same as the log file from succesful installation until bolded line:
MSI (s) (30:A4) [15:02:44:281]: User policy value 'DisableRollback' is 0
MSI (s) (30:A4) [15:02:44:281]: Machine policy value 'DisableRollback' is 0
Action ended 15:02:44: InstallFinalize. Return value 2.
On successful installation the return value is 1. But it doesn't tell me anything. Also in event logs I got only mssinstaller information (event 11708)
Product: Oracle Database 10g Express Edition -- Installation operation failed.
Do anyone experienced such problem?
Regards,
PiotrYou may want to check Event ID: 11708.
-
Windows 2003 SP2 = 2008 R2 SP1 Upgrade 62% Rollback
Hello,
we have to upgrade our Windows Server 2003 SP2 x64 (DC), to Windows 2008 R2 SP1.
Unfortunately, a clean install is not an option.
The server is a virtual machine. Therefore, first we make a clone, for a test upgrade, of the server.
Adprep and domainprep was successful. Problematic Software: Acronis, DaemonTools, Kasperksy.. is uninstalled.
Will upgraded with a clean iso, downloaded from the VLSC.
All Windows 2003 updates have been installed and a clean-boot (msconfig : MS services, no startup items), was done.
During the upgrade, we download the installation updates (Get important updates for installation).
The environment variable MIG_UPGRADE_IGNORE_PLUGINS = IphlpsvcMigPlugin.dll was already tried in another upgrade.
We have the setupact.log (33MB) from the \$Windows folder.~ BT\Sources\Panther\ . But can't found the error.
The Upgrade stops at 62%:
Then the server reboots and performs a rollback :
What can we do?
Regards,
StefanHi Stefan,
Stopped at 62% is a common issue which could be caused by many factors.
First I suggest you to remove all unnecessary devices like printer, USB device etc.
Also try to uninstall drivers for hardware devices. I noticed that many applications are already deleted in troubleshooting process so check if any unnecessary program still exists.
If issue still exists, try check disk and SFC.
The last option is to perform an in-place upgrade with Windows Server 2003 and try the 2008 upgrade again.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forum a great place. -
Admin Console errors in fresh install on Windows 2003 Enterprise.
I have attempted to install 6.1 SP4 on two different Windows 2003 Enterprise boxes. Neither has W2K3 SP1 on them. The installs proceed using a typical install with no errors reported. All defaults were accepted during the install. I can start the server for the Admin and web server instances. I can hit the default page on the web server instance. When I attempt to launch the admin console, I am prompted to logon, as expected. I enter my credentials and promptly get an HTTP 500 error. I check the logs in C:\Sun\WebServer6.1\https-admserv\logs\errors and find the following line:
[26/Apr/2005:12:43:26] failure ( 2596): for host 192.168.175.128 trying to GET /https-admserv/bin/index, cgi_scan_headers reports: HTTP4044: the CGI program C:\Sun\WebServer6.1\bin\https\admin\bin\index.exe did not produce a valid header (program terminated without a valid CGI header. Check for core dump or other abnormal termination)
I searched for others reporting similar problems and the closest I could come to an answer was to make sure cookies were enabled on the brower (they are). I get the same error in IE and Firefox, both locally and remotely. After becoming frustrated with one W2K3 server, I decided to try on another. Exactly the same errors.
Increased loglevels in the server.xml provide no additional logging for this problem. Any pointers to a resolution would be most appreciated as I'm about ready to scrap Sun and move to Apache.
Thanks,
SeanYes, there appear to be problems where certain old versions of Netscape and iPlanet products can leave old DLLs lingering in the Windows system32 directory.
I'd check for the following files in the Windows system32 directory (typically C:\WINNT\system32 or C\WINDOWS\system32):
libnspr4.dll
libplc4.dll
libplds4.dll
nss3.dll
nssckbi.dll
smime3.dll
ssl3.dll
nsldap32v50.dll
nsldappr32v50.dll
nsldapssl32v50.dll
If you find any of these files, you can try replacing them with a copy from your Web Server install. Don't forget to backup first.
Please report back what you find! -
Hyperion 6.1 with Windows 2003 SP2?
We are trying to upgrade our production servers from windows 2003 SP1 - SP2. These server have Hyperion 6.1 installed on them. I just wanted to know if this would have any impact this version of Hyperion. I personally wouldn't have thought so but I just wanted to check.
Its certified on 2003 SP2 as well.
-
Oracle not installing in WINDOWS 2003 SERVER
I cound not able to install oracle 10g in windows 2003 server. But its working fine in windows xp. I dont know for what reson its not installing. Once autoexec.exe is started, Its showing a black screen with please wait...... But after
10seconds its disappearing . Kindly help me. It says its DEP (DATA EXECUTION PREVENTAION) some thing like that.It's a Windows "issue", not Oracle :
http://support.microsoft.com/kb/875352
Nicolas.
Maybe you are looking for
-
Child value is not updated?
Private Sub SBO_Application_ItemEvent(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef BubbleEvent As Boolean) Handles SBO_Application.ItemEvent Dim i As Integer Dim sumdepth As Decimal = 0 Dim oForm As SAPbo
-
Hi - I'm on a Mac and trying to create text columns in Photoshop CS3. I know that I could bring the image into InDesign and lay it out that way, but want to do everything in Photoshop because I am putting it up on the web. Are creating text columns i
-
Video appears black when it plays
Ok, so I just got AE CS6 the trail version, and I have through a problem.Whenever I want to RAM Preview a video it appears black. Why?!
-
Pages ePub export - Can I use TOC for page breaks?
I want to export a Pages file to ePub. Things work *almost* perfectly, except the page breaks disappear. I've read a few other threads, such as this one, that say that Pages uses the *first* style from the TOC to make page breaks. That doesn't work g
-
Error initializing LiveCycle ES3 on AIX, Websphere 7 with DB2 9.5
Hello, I'm having a problem during configuration of LiveCycle ES3 on an AIX 6.1 with WebSphere 7.0.0.25 and DB2 9.5 on the same machine. I'm getting following error: com.adobe.livecycle.lcm.core.LCMException[ALC-LCM-000-000]: Failed on step 'Invoking