10gR2 Grid Control with previous Agents?

I have 10gR2 Grid Control installed on a Linux Server. I want to use it to create a DataGuard standby database. The issue is that the primary database is 10gR2 on a HP-UX server using ASM and the standby database will also be 10gR2 on a HP-UX server using ASM. Will the 10gR2 Linux Grid Control be able to handle this since the agent on the primary will be 10.1.0.4? Note: 10gR2 is available for HP-UX but 10gR2 Grid Control is not yet available so that is why I have 10.1.0.4 agent.

Yes , it is able to handle

Similar Messages

  • Linux Grid control and windows agents

    Hi all,
    I have a Linux based GC and want to communicate with agents on a windows server. Does this combination use SSH? how do you go about installing agents remotely in this configuration. Any help would be apreciated.
    rgds
    alan

    It's possible to install agents remotely on Windows. See this metalink note:
    How to Install/Configure Cygwin and 'ssh' Server on Windows for use with Grid Control Remote's Agent Deployment
    Doc ID:389632.1
    Werner

  • Suggested concept for Grid Control with DataGuard solution

    Hello,
    I want a Disaster Recovery solution for OEM Grid Control with DataGuard but with only one OMS running. (11.1)
    I have figured out the following.
    Installation OEM Grid control om host A. Repository is created on Host A. Connection to database is done thru servicename DBGRDSRV on Host A
    Installation OEM Grid control om host B. Repository is created on Host B. Connection to database is done thru servicename DBGRDSRV on Host B
    I stop OMS on host B and I drop the database on Host B
    Then....
    I create a Dataguard configuration for DBGRDSRV, the prim database run on Host A en secondary on Host B
    In case of a failure i switch the database. On host B i will have DBGRDSRV as the primary database
    I start OMS on host B and the agent.
    In case the failure is resolved i switch back eveything
    Will thos concept work?
    Do i get some troubles with the emkey, and if so, does anybody has a solution for this?
    Any help is appreciated
    Regards,
    Jaap
    Edited by: user9956284 on 28-jul-2011 10:44

    Hi,
    Please follow the document provided below:
    How to Configure the OMS Connect String when Repository is in a Dataguard setup (Doc ID 1328768.1)
    Let me know, if you are looking for the same document.
    Best Regards,
    Venkat

  • 11g Grid Control with Dataguard

    Hi ,
    I need to configure a 11g Grid Control with Dataguard for the repository, are there any documents that i can follow for configuring the dataguard
    for the Grid Control 11g, I am interested as how i would be setting up the tns entry in the OMS , since i had to do the failover / switchover etc of OEM Grid Control application across the standby .
    Kind regards
    Krish

    Hi,
    Please follow the document provided below:
    How to Configure the OMS Connect String when Repository is in a Dataguard setup (Doc ID 1328768.1)
    Let me know, if you are looking for the same document.
    Best Regards,
    Venkat

  • Patching Grid Control OMS and Agent to 10.2.0.5 issue

    Oracle 11gR1 RHEL5 - Grid Control 10.2.0.5
    Hi All,
    I have been stuck on this issue for over a month (was relying on Oracle supports help and they just would not reply) and I can't figure it out. Basically, what happened is that my 10.2.0.5 patch set failed partiallty when I was applying it to the OMS. Here is what is going on right now:
    Database Repository (EMREP) - 11gR1 (11.1.0.6) - /opt/app/oracle/product/11.1.0/db_1
    OMS - 10.2.0.5 - /opt/app/oracle/product/10.2.0/grid_1/oms10g
    Agent - 10.2.0.5 - /opt/app/oracle/product/10.2.0/grid_1/agent10g
    When I was almost done with the 10.2.0.5 patch on the OMS, OUI gave me the following error:
    SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration
    assistants at this time. Not successfully running any "Recommended" assistants
    means your system will not be correctly configured.
    *1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the*
    failures.
    *2. Fix the errors causing these failures.*
    *3. Select the failed assistants and click the 'Retry' button to retry them*
    When I checked the logs I found the following messages (Here is a part of it...I think before it started to fail):
    Finished deleting the above files...
    INFO: Configuration assistant "OMS Oneoff Patch Application" succeeded
    INFO: Command = oracle.sysman.emcp.oms.RepositoryPatchUpgrade -verbose
    Repository Upgrade is failed with errors. Restore the database, rectify the errors and retry the install.
    For more details :
    -For configuration issues, look at the log files present in following location:
    /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/cfgfw
    -For repository failures, look at the log files
    /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.
    2.0.5.0
    /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0.errors
    -If not able to identify the repository issues, contact ORACLE Support.
    -After the Repository issues are rectified and upgraded successfully, execute the below runConfig command to run remaining config tools.
    Goto /opt/app/oracle/product/10.2.0/grid_1/oms10g/oui/bin directory and run below command.
    For UNIX :
    ./runConfig.sh ORACLE_HOME=/opt/app/oracle/product/10.2.0/grid_1/oms10g ACTION=patchsetConfigure MODE=perform COMPONENT_XML=oracle.sysman.top.oms.10_2_0_5_0.xml
    For Windows :
    runConfig.bat ORACLE_HOME=/opt/app/oracle/product/10.2.0/grid_1/oms10g ACTION=patchsetConfigure MODE=perform COMPONENT_XML=oracle.sysman.top.oms.10_2_0_5_0.xml
    Command = oracle.sysman.emcp.oms.RepositoryPatchUpgrade has failed
    Exception : java.lang.Exception: Command: /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=rhel-grid)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=emrep))) -action upgrade -no_transx -no_verify -verbose -repos_user sysman -output_file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0 failed. Exit code: expected [0 ], but got 45
    INFO: Configuration assistant "Repository Upgrade" failed
    *** Starting OUICA ***
    Oracle Home set to /opt/app/oracle/product/10.2.0/grid_1/oms10g
    Configuration directory is set to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs. All xml files under the directory will be processed
    Parsing configuration file config.xml ....
    Ended Parsing configuration file config.xml
    Start Processing configuration tool Oracle Internet Directory Patch Configuration Assistant....
    Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/patchca.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
    Buffer size for copying file is set to 2048
    Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/patchca.log
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/patchca.log from the file path expanding...
    WARN: Source file /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/patchca.log could not be found. Nothing will be copied for this file
    Number of file(s) copied is 0
    Number of directories copied is 0
    End Processing configuration tool Oracle Internet Directory Patch Configuration Assistant
    Start Processing configuration tool Directory Integration Platform Configuration Assistant....
    Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/oidca.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
    Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/oidca.log
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/oidca.log from the file path expanding...
    WARN: Source file /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/oidca.log could not be found. Nothing will be copied for this file
    Number of file(s) copied is 0
    Number of directories copied is 0
    End Processing configuration tool Directory Integration Platform Configuration Assistant
    Start Processing configuration tool OC4J Instance Configuration Assistant....
    Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/j2ee/home/log/* to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
    Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/j2ee/home/log/*
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/j2ee/home/log/home_default_island_1 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/j2ee/home/log/operations from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/j2ee/home/log/log.xml from the file path expanding...
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/j2ee/home/log/log.xml to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/log.xml
    Number of file(s) copied is 1
    Number of directories copied is 0
    End Processing configuration tool OC4J Instance Configuration Assistant
    Start Processing configuration tool OPMN Configuration Assistant - start HTTP server....
    Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/* to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
    Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/*
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/WebCache~WebCacheAdmin~1 from the file path expanding...
    Number of directories copied is 0
    End Processing configuration tool OPMN Configuration Assistant - start OCA Instance
    Start Processing configuration tool Wireless Configuration Assistant....
    Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
    Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out from the file path expanding...
    WARN: Source file /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out could not be found. Nothing will be copied for this file
    Number of file(s) copied is 0
    Number of directories copied is 0
    End Processing configuration tool Wireless Configuration Assistant
    Start Processing configuration tool Wireless Metadata Repository Update....
    Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
    Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out from the file path expanding...
    WARN: Source file /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out could not be found. Nothing will be copied for this file
    Number of file(s) copied is 0
    Number of directories copied is 0
    End Processing configuration tool Wireless Metadata Repository Update
    Start Processing configuration tool Portal Metadata Repository Update....
    Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/portal/upg/plsql/upgrade.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
    Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/portal/upg/plsql/upgrade.log
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/portal/upg/plsql/upgrade.log from the file path expanding...
    WARN: Source file /opt/app/oracle/product/10.2.0/grid_1/oms10g/portal/upg/plsql/upgrade.log could not be found. Nothing will be copied for this file
    Number of file(s) copied is 0
    Number of directories copied is 0
    End Processing configuration tool Portal Metadata Repository Update
    Start Processing configuration tool OPMN Configuration Assistant....
    Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/* to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
    Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/*
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/WebCache~WebCacheAdmin~1 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/OC4J~OC4J_EM~default_island~1 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/dcm-daemon~dcm-daemon~dcm~1 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/ons.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/WebCache~WebCache~1 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/OC4J~OC4J_EMPROV~default_island~1 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/states from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/OC4J~home~default_island~1 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/opmn.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/HTTP_Server~1 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/ipm.log from the file path expanding...
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/WebCache~WebCacheAdmin~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/WebCache~WebCacheAdmin~1
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/OC4J~OC4J_EM~default_island~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/OC4J~OC4J_EM~default_island~1
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/dcm-daemon~dcm-daemon~dcm~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/dcm-daemon~dcm-daemon~dcm~1
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/ons.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/ons.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/WebCache~WebCache~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/WebCache~WebCache~1
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/OC4J~OC4J_EMPROV~default_island~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/OC4J~OC4J_EMPROV~default_island~1
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/OC4J~home~default_island~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/OC4J~home~default_island~1
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/opmn.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/opmn.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/HTTP_Server~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/HTTP_Server~1
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/ipm.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/ipm.log
    Number of file(s) copied is 10
    Number of directories copied is 0
    End Processing configuration tool OPMN Configuration Assistant
    Start Processing configuration tool Application Server Control Configuration Assistant....
    Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/* to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
    Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/*
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.10 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emdctl.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.4.0 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagentfetchlet.trc from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.1 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.4 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.7 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/nfsPatchPlug.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/em-application.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.9 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.8 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emdctl.trc from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emctl.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/server.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/secure.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.6 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/em.nohup from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0.errors from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/em-web-access.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/pafLogs from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emias.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.5 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.4.0.errors from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.3 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagent.trc from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/rmi.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagent.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.2 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emca_repos_out_of_box12_56_33.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagentfetchlet.log from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.log.1 from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0.transx from the file path expanding...
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.10 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.10
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emdctl.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emdctl.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.4.0 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emrepmgr.log.10.2.0.4.0
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagentfetchlet.trc to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emagentfetchlet.trc
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.1
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.4 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.4
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.7 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.7
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/nfsPatchPlug.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/nfsPatchPlug.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/em-application.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/em-application.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.9 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.9
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.8 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.8
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emrepmgr.log.10.2.0.5.0
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emdctl.trc to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emdctl.trc
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emctl.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emctl.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/server.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/server.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/secure.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/secure.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.6 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.6
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/em.nohup to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/em.nohup
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0.errors to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emrepmgr.log.10.2.0.5.0.errors
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/em-web-access.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/em-web-access.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emias.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emias.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.5 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.5
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.4.0.errors to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emrepmgr.log.10.2.0.4.0.errors
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.3 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.3
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagent.trc to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emagent.trc
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/rmi.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/rmi.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagent.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emagent.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.2 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.2
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emca_repos_out_of_box12_56_33.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emca_repos_out_of_box12_56_33.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagentfetchlet.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emagentfetchlet.log
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.log.1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.log.1
    Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0.transx to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emrepmgr.log.10.2.0.5.0.transx
    Number of file(s) copied is 34
    Number of directories copied is 0
    End Processing configuration tool Application Server Control Configuration Assistant
    Start Processing configuration tool DCM Repository Update Assistant ....
    Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/dcm/logs/* to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
    Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/dcm/logs/*
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/dcm/logs/dcmctl_logs from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/dcm/logs/emd_logs from the file path expanding...
    Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/dcm/logs/daemon_logs from the file path expanding...
    Number of file(s) copied is 0
    Number of directories copied is 0
    End Processing configuration tool DCM Repository Update Assistant
    INFO: The "/opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
    INFO: Since the option is to overwrite the existing /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/configToolFailedCommands file, backing it up
    INFO: The backed up file name is /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/configToolFailedCommands.bak.1
    SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
    1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
    2. Fix the errors causing these failures.
    3. Select the failed assistants and click the 'Retry' button to retry them.
    INFO: User Selected: Yes/OK
    INFO: Starting to execute configuration assistants
    INFO: Command = oracle.sysman.emcp.oms.RepositoryPatchUpgrade -verbose
    Repository Upgrade is failed with errors. Restore the database, rectify the errors and retry the install.
    For more details :
    -For configuration issues, look at the log files present in following location:
    /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/cfgfw
    -For repository failures, look at the log files
    /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0
    /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0.errors
    -If not able to identify the repository issues, contact ORACLE Support.
    -After the Repository issues are rectified and upgraded successfully, execute the below runConfig command to run remaining config tools.
    Goto /opt/app/oracle/product/10.2.0/grid_1/oms10g/oui/bin directory and run below command.
    For UNIX :
    ./runConfig.sh ORACLE_HOME=/opt/app/oracle/product/10.2.0/grid_1/oms10g ACTION=patchsetConfigure MODE=perform COMPONENT_XML=oracle.sysman.top.oms.10_2_0_5_0.xml
    For Windows :
    runConfig.bat ORACLE_HOME=/opt/app/oracle/product/10.2.0/grid_1/oms10g ACTION=patchsetConfigure MODE=perform COMPONENT_XML=oracle.sysman.top.oms.10_2_0_5_0.xml
    Command = oracle.sysman.emcp.oms.RepositoryPatchUpgrade has failed
    Exception : java.lang.Exception:
    REPOSITORY UPGRADE STATUS : 3
    INFO: Configuration assistant "Repository Upgrade" failed
    I would appreciate any help on this as I have been stuck on it since April :( Not too happy with Oracle Support.
    Thanks much to all!
    JrOraDBA

    Here is the output for when I applied the patch:
    opatch apply
    Invoking OPatch 10.2.0.3.0
    Oracle interim Patch Installer version 10.2.0.3.0
    Copyright (c) 2005, Oracle Corporation.  All rights reserved..
    Oracle Home       : /opt/app/oracle/product/10.2.0/grid_1/db10g
    Central Inventory : /opt/app/oracle/oraInventory
    from           : /etc/oraInst.loc
    OPatch version    : 10.2.0.3.0
    OUI version       : 10.2.0.3.0
    OUI location      : /opt/app/oracle/product/10.2.0/grid_1/db10g/oui
    Log file location : /opt/app/oracle/product/10.2.0/grid_1/db10g/cfgtoollogs/opatch/opatch2009-04-22_12-07-14PM.log
    ApplySession applying interim patch '4329444' to OH '/opt/app/oracle/product/10.2.0/grid_1/db10g'
    Invoking fuser to check for active processes.
    Invoking fuser on "/opt/app/oracle/product/10.2.0/grid_1/db10g/bin/oracle"
    OPatch detected non-cluster Oracle Home from the inventory and will patch the local system only.
    Please shutdown Oracle instances running out of this ORACLE_HOME on the local system.
    *(Oracle Home = '/opt/app/oracle/product/10.2.0/grid_1/db10g')*
    Is the local system ready for patching?
    *Do you want to proceed? y*
    y
    User Responded with: Y
    Backing up files and inventory (not for auto-rollback) for the Oracle Home
    Backing up files affected by the patch '4329444' for restore. This might take a while...
    Backing up files affected by the patch '4329444' for rollback. This might take a while...
    Patching component oracle.rdbms, 10.1.0.4.0...
    Updating archive file "/opt/app/oracle/product/10.2.0/grid_1/db10g/lib/libserver10.a"  with "lib/libserver10.a/qerix.o"
    ApplySession adding interim patch '4329444' to inventory
    Verifying the update...
    Inventory check OK: Patch ID 4329444 is registered in Oracle Home inventory with proper meta-data.
    Files check OK: Files from Patch ID 4329444 are present in Oracle Home.
    Running make for target ioracle
    The local system has been patched and can be restarted.
    OPatch succeeded.
    However, the weird thing is that I don't see it in the lsinventory:
    */opt/app/oracle/product/10.2.0/grid_1/db10g/OPatch/opatch lsinventory*
    Invoking OPatch 10.2.0.3.0
    Oracle interim Patch Installer version 10.2.0.3.0
    Copyright (c) 2005, Oracle Corporation.  All rights reserved..
    Oracle Home       : /opt/app/oracle/product/10.2.0/grid_1/db10g
    Central Inventory : /opt/app/oracle/oraInventory
    from           : /etc/oraInst.loc
    OPatch version    : 10.2.0.3.0
    OUI version       : 10.2.0.3.0
    OUI location      : /opt/app/oracle/product/10.2.0/grid_1/db10g/oui
    Log file location : /opt/app/oracle/product/10.2.0/grid_1/db10g/cfgtoollogs/opatch/opatch2009-06-09_09-37-54AM.log
    Lsinventory Output file location : /opt/app/oracle/product/10.2.0/grid_1/db10g/cfgtoollogs/opatch/lsinv/lsinventory2009-06-09_09-37-54AM.txt
    Installed Top-level Products (2):
    Oracle Database 10g Patch Set 3                                      10.1.0.5.0
    Oracle Enterprise Manager Repository Database                        10.2.0.3.0
    There are 2 products installed in this Oracle Home.
    Interim patches (1) :
    Patch  5632264      : applied on Thu Apr 23 12:23:10 CDT 2009
    Created on 8 Feb 2007, 00:38:09 hrs PST8PDT
    Bugs fixed:
    *5632264*
    OPatch succeeded.
    Do you think I should restore the backup (and I only have the database backup, not the Oracle Home backup)?
    THanks.

  • Grid control with combo cell

    Does Anybody have some information about grid
    control/oracleSpreadTable with combo list instead of text cell.
    Please help!!
    null

    As curious as I always am, I was able to discover my XE database from the GC 10.1.0.4 last month. I did this because I asked myself the same question. When there is time, I normally will try everything that says "Not supported" or "Not compartible" to prove it right or wrong. So give it a go, but don't post errors from it here :-). I have not tried it for GC 10.2.0.2, but it worked on 10.1.0.4 (hopefully 10.1.0.3).
    Remember, XE has all the features of EE, but a cutdown version. It has an Oracle Service and a Listener on a port, so the agent will pick them up. I have tried all possible things and tools (Forms, Reports, Designer Repository, Jdeveloper, SQL Developer, ODBC, JDBC etc) on XE to break it, but it works like EE. The only difference is when you hit the max allowed 4GB (excluding 1GB system) and I proved the limit right by kicking of a data load into a table using a cursor until it hit the maximum 4GB limit error.

  • Installing Grid Control and its agents in RAC

    Hi
    I have a RAC of 2 nodes in 10.2.0.5 . I need to install Grid Control in another server to manage the RAC.
    I have several questions....
    The agent and grid control to be install has to be in 10.2.0.5 as well ? or must be higher...
    I have to install the agent in all nodes of the RAC ? and after the grid control in another server ?
    Thanks

    WAIT...
    I was thinking same that Grid Installer will create the databasse or you can use the one if exists..
    but when I was reading a similar thread.. The Grid control installer has inside an Oracle Server ?
    someone mentioned that Grid Installer will not create repository database.
    It is better if you refer the document before make any further comments.

  • Grid Control with Oracle XE?

    I've just installed Oracle Express Edition and looks great. Can i connect it to a management server (grid control)?

    As curious as I always am, I was able to discover my XE database from the GC 10.1.0.4 last month. I did this because I asked myself the same question. When there is time, I normally will try everything that says "Not supported" or "Not compartible" to prove it right or wrong. So give it a go, but don't post errors from it here :-). I have not tried it for GC 10.2.0.2, but it worked on 10.1.0.4 (hopefully 10.1.0.3).
    Remember, XE has all the features of EE, but a cutdown version. It has an Oracle Service and a Listener on a port, so the agent will pick them up. I have tried all possible things and tools (Forms, Reports, Designer Repository, Jdeveloper, SQL Developer, ODBC, JDBC etc) on XE to break it, but it works like EE. The only difference is when you hit the max allowed 4GB (excluding 1GB system) and I proved the limit right by kicking of a data load into a table using a cursor until it hit the maximum 4GB limit error.

  • When will 10gR2 Grid Control be release

    I have installed 10g RAC onto Solaris and have been testing various failure scenarios over the last few weeks.
    I have to give a recommendation to the Director next week and need to know when GRID control is going to be available.

    Based off my experience with GC 10.1.0.2, it might be worth sticking with 10.1.0.4 until the first patch for R2....

  • Installing Grid control with existing IAS

    Is it possible (and how) to install Grid control into existing Application Server installation? Or integrate it somehow?

    yes u can install Grid control into existing Application Server installation

  • Grid control design and agent deployment

    To give you a brief overview of the setup here, it is currently an agent per instance instead of an agent per host. This was done to allow an agent to be moved along with an instance to another host in a cluster (we are using IBM AIX LPAR, and Sun Clustering) thereby allowing a seamless transition between hosts and history retention for the instance. We would like to change this to an agent per host, however, we need to keep the historical information of the instance should it change hosts. So my questions are:
    1. Is it possible using some sort of script or process to have an instance/target move between hosts and retain its previous historical information?
    2. Is it possible to have a single, summarized availability report for all instances? The report per instance works, however, doing a single summary report for all instances does not display the correct information (it only shows PIT, i.e. the current state of the instances not historical over x period of time).
    Any help is appreciated.
    Thanks.

    Let me provide some details as to the environment as to the deployment which I am doing in a HA environment:
    - There is a physical 'myhost1' with virtual hosts names oradev1, oratst1. Note I am not referring to virtual machines, just virtual host names, or virtual IP.
    - Each VIP hosts a listener and database instance. For example, oradev1 -> lsnr-oradev1 + orad1, and oratst1 -> lsnr-oratst1 + orat1
    In this design each database and listener can be moved to another physical host separate from the other, say the entire oradev1 stack moves to 'myhost2'.
    How would the agents be deployed in such a design? I think an agent per physical host, with the VIP used to monitor the virtual stacks, such has as each virtual host containing the listener and database instance. This way when a virtual stack moves we can just switch the agent monitoring that stack to the new host and retain the history of the targets.
    Is my thinking correct? Is there a better way to retain the history when moving the virtual stacks perhaps doing an agent per instance instead of physical target?
    I hope this provides more details. Thanks.

  • Filespace Available Metric in Grid Control with CDROMs mounted

    I getting tried of filespace available alerts being generated against cdrom drives on our Sun Server. Is there are way for Grid to ignore cdroms that are mounted.

    You should be aware of the following:
    When you have tested your UDM and the output is what you expect, you will press [OK] and then the UDM is saved and activated.
    The alert should then be shown as soon as your UDM thresholds values are reached.
    The same page that gives you an overview of available UDM's will also show you an overview of each evaluation that has been done.
    So, you should see for each run of the UDM, what thershold values were measured and if or not the treshold value was hit.
    If you don't see this, then there is something wrong with you UDM definition.
    If you make screenshots of the UDM defintoin and the output on the overview page and send them to me [email protected] then I might be able to indicate was is causing this problem.
    Not a 100% fit, but you might want to take a look at ad document I created for the creation of User Defined Metric and a Notifcation Rule to be used: http://oemgc.files.wordpress.com/2010/02/creating-user-defined-metrics.pdf
    Regards
    Rob
    http://oemgc.wordpress.com

  • Userdefined metrics in grid control with OEM

    Hi,
    i created a user defined metric to check the size of perticular tablespace, as for that
    i wrote a query like select bytes/1024/1024 from dba_data_files where tablespace_name like 'tablespacename'
    my query is giving output :100mb
    i gave the threshold values like operator= '=', warning = '100', critical = 110. to tset my alert will fire or not
    iam not specified any response action for this,
    when iam testing it willcollect the value is 100mb, successful.
    but my alert is not firing.
    can anybody help me out regarding this issue

    You should be aware of the following:
    When you have tested your UDM and the output is what you expect, you will press [OK] and then the UDM is saved and activated.
    The alert should then be shown as soon as your UDM thresholds values are reached.
    The same page that gives you an overview of available UDM's will also show you an overview of each evaluation that has been done.
    So, you should see for each run of the UDM, what thershold values were measured and if or not the treshold value was hit.
    If you don't see this, then there is something wrong with you UDM definition.
    If you make screenshots of the UDM defintoin and the output on the overview page and send them to me [email protected] then I might be able to indicate was is causing this problem.
    Not a 100% fit, but you might want to take a look at ad document I created for the creation of User Defined Metric and a Notifcation Rule to be used: http://oemgc.files.wordpress.com/2010/02/creating-user-defined-metrics.pdf
    Regards
    Rob
    http://oemgc.wordpress.com

  • Agent upload successfully but  in the grid control it says agent unreachabl

    Any suggestions on what could be going wrong.
    TIA
    pk

    hi nazim,
    here it is from emoms.trc
    2007-08-20 11:52:52,396 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.473 - Integration Class not found: oracle.sysman.pp.paf.sample.ui.intg.PAFDemoIntegration
    2007-08-20 11:53:03,601 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.473 - Integration Class not found: oracle.sysman.pp.ocsu.ui.intg.OCSUpgradeIntegration
    2007-08-20 11:53:05,229 [Orion Launcher] ERROR util.Breadcrumb <init>.72 - Duplicate breadcrumb for page ias/ias/home
    2007-08-20 11:53:09,010 [JobWorker 126287:Thread-20] ERROR audit.AuditManager isAuditOn.162 - Repository may not be up.
    2007-08-20 11:54:53,546 [EMUI_11_54_53_/console/monitoring/hostOverview$ctxType=Hosts$type=host$target=tsb-sac-ofs-001] ERROR host.HostOverviewDataObject getLogonInfo.2343 - Connection refused
    oracle.sysman.emSDK.emd.comm.CommException: Connection refused
    at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1543)
    at oracle.sysman.emSDK.emd.comm.EMDClient.getMetrics(EMDClient.java:915)
    at oracle.sysman.eml.mntr.host.HostOverviewDataObject.getLogonInfo(HostOverviewDataObject.java:2285)
    at oracle.sysman.eml.mntr.host.HostOverviewDataObject.getHostInfo(HostOverviewDataObject.java:2226)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at oracle.cabo.ui.data.provider.MethodDataProvider.getDataObject(Unknown Source)
    at oracle.cabo.ui.data.provider.TableDataProvider.getDataObject(Unknown Source)
    at oracle.cabo.ui.data.provider.CachingDataProvider.getDataObject(Unknown Source)
    at oracle.cabo.ui.data.provider.DataProviderStack.getDataObject(Unknown Source)
    at oracle.cabo.ui.LogicalNodeRenderingContext.getDataObject(Unknown Source)
    at oracle.cabo.ui.RootRenderingContext.getDataObject(Unknown Source)
    at oracle.cabo.ui.LogicalNodeRenderingContext.getDataObject(Unknown Source)
    at oracle.cabo.ui.RootRenderingContext.getDataObject(Unknown Source)
    at oracle.cabo.ui.data.DataBoundValue.getValue(Unknown Source)
    at oracle.cabo.ui.BaseUINode.getAttributeValueImpl(Unknown Source)
    at oracle.cabo.ui.BaseUINode.getAttributeValue(Unknown Source)
    at oracle.cabo.ui.laf.base.TextRenderer.renderContent(Unknown Source)
    at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
    at oracle.cabo.ui.BaseUINode.render(Unknown Source)
    at oracle.cabo.ui.BaseUINode.render(Unknown Source)
    at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
    at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
    at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
    at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
    at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
    at oracle.cabo.ui.BaseUINode.render(Unknown Source)
    at oracle.cabo.ui.BaseUINode.render(Unknown Source)
    at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
    at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
    at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
    at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
    at oracle.cabo.ui.laf.base.xhtml.BodyRenderer.renderContent(Unknown Source)
    at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
    at oracle.cabo.ui.BaseUINode.render(Unknown Source)
    at oracle.cabo.ui.BaseUINode.render(Unknown Source)
    at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
    at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
    at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
    at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
    at oracle.cabo.ui.laf.base.xhtml.DocumentRenderer.renderContent(Unknown Source)
    at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
    at oracle.cabo.ui.laf.base.xhtml.DocumentRenderer.render(Unknown Source)
    at oracle.cabo.ui.BaseUINode.render(Unknown Source)
    at oracle.cabo.ui.BaseUINode.render(Unknown Source)
    at oracle.cabo.servlet.ui.UINodePageRenderer.renderPage(Unknown Source)
    at oracle.cabo.servlet.AbstractPageBroker.renderPage(Unknown Source)
    at oracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown Source)
    at oracle.cabo.servlet.UIXServlet.doGet(Unknown Source)
    at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:377)
    at oracle.sysman.eml.app.Console.doGet(Console.java:318)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
    at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:109)
    at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
    at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
    at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
    at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
    at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
    at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:336)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:659)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
    at java.lang.Thread.run(Thread.java:534)
    2007-08-20 11:55:15,690 [EMUI_11_55_15_/console/monitoring/hostOverview$showLast=true$target=tsb-sac-ofs-001$type=host$ctxType=Hosts] ERROR host.HostOverviewDataObject getLogonInfo.2343 - Connection refused
    oracle.sysman.emSDK.emd.comm.CommException: Connection refused
    at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1543)
    at oracle.sysman.emSDK.emd.comm.EMDClient.getMetrics(EMDClient.java:915)
    at oracle.sysman.eml.mntr.host.HostOverviewDataObject.getLogonInfo(HostOverviewDataObject.java:2285)
    at oracle.sysman.eml.mntr.host.HostOverviewDataObject.getHostInfo(HostOverviewDataObject.java:2226)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at oracle.cabo.ui.data.provider.MethodDataProvider.getDataObject(Unknown Source)
    at oracle.cabo.ui.data.provider.TableDataProvider.getDataObject(Unknown Source)
    and from emoms.log
    2007-08-20 11:52:52,396 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.473 - Integration Class not found: oracle.sysman.pp.paf.sample.ui.intg.PAFDemoIntegration
    2007-08-20 11:53:03,601 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.473 - Integration Class not found: oracle.sysman.pp.ocsu.ui.intg.OCSUpgradeIntegration
    2007-08-20 11:53:05,229 [Orion Launcher] ERROR util.Breadcrumb <init>.72 - Duplicate breadcrumb for page ias/ias/home
    2007-08-20 11:53:09,010 [JobWorker 126287:Thread-20] ERROR audit.AuditManager isAuditOn.162 - Repository may not be up.
    2007-08-20 11:54:53,546 [EMUI_11_54_53_/console/monitoring/hostOverview$ctxType=Hosts$type=host$target=tsb-sac-ofs-001] ERROR host.HostOverviewDataObject getLogonInfo.2343 - Connection refused
    oracle.sysman.emSDK.emd.comm.CommException: Connection refused
    at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1543)
    at oracle.sysman.emSDK.emd.comm.EMDClient.getMetrics(EMDClient.java:915)
    at oracle.sysman.eml.mntr.host.HostOverviewDataObject.getLogonInfo(HostOverviewDataObject.java:2285)
    at oracle.sysman.eml.mntr.host.HostOverviewDataObject.getHostInfo(HostOverviewDataObject.java:2226)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at oracle.cabo.ui.data.provider.MethodDataProvider.getDataObject(Unknown Source)
    at oracle.cabo.ui.data.provider.TableDataProvider.getDataObject(Unknown Source)
    at oracle.cabo.ui.data.provider.CachingDataProvider.getDataObject(Unknown Source)
    at oracle.cabo.ui.data.provider.DataProviderStack.getDataObject(Unknown Source)
    at oracle.cabo.ui.LogicalNodeRenderingContext.getDataObject(Unknown Source)
    at oracle.cabo.ui.RootRenderingContext.getDataObject(Unknown Source)
    at oracle.cabo.ui.LogicalNodeRenderingContext.getDataObject(Unknown Source)
    at oracle.cabo.ui.RootRenderingContext.getDataObject(Unknown Source)
    at oracle.cabo.ui.data.DataBoundValue.getValue(Unknown Source)
    at oracle.cabo.ui.BaseUINode.getAttributeValueImpl(Unknown Source)
    at oracle.cabo.ui.BaseUINode.getAttributeValue(Unknown Source)
    at oracle.cabo.ui.laf.base.TextRenderer.renderContent(Unknown Source)
    at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
    at oracle.cabo.ui.BaseUINode.render(Unknown Source)
    at oracle.cabo.ui.BaseUINode.render(Unknown Source)
    at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
    at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
    at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
    at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
    at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
    at oracle.cabo.ui.BaseUINode.render(Unknown Source)
    at oracle.cabo.ui.BaseUINode.render(Unknown Source)
    "emoms.log" [readonly] 2343L, 180590C
    so here the agent is on tsb-sac-ofs-001
    please advise.
    thanks
    PK

  • Install error 10gr2 Grid control on AIX 5.3

    INFO: Configuration assistant "EM Technology Stack Upgrade" succeeded
    INFO: Command = oracle.sysman.emcp.oms.OmsPlugIn -configureOms
    Operation Stopping OPMN Processes is in progress.
    Operation EM Deploying is in progress.
    Operation Unlocking Passwords and Out of Box setup is in progress.
    Command = oracle.sysman.emcp.oms.OmsPlugIn has failed
    INFO: Configuration assistant "OMS Configuration" failed
    *** Starting OUICA ***
    Oracle Home set to /u01/app/oracle/product/10gdb/db10g
    Configuration directory is set to /u01/app/oracle/product/10gdb/db10g/cfgtoollogs. All xml files under the directory will be processed
    INFO: The "/u01/app/oracle/product/10gdb/agent10g/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
    INFO: Created a new file /u01/app/oracle/product/10gdb/agent10g/cfgtoollogs/configToolFailedCommands
    INFO: Since the option is to overwrite the existing /u01/app/oracle/product/10gdb/agent10g/cfgtoollogs/configToolFailedCommands file, backing it up
    INFO: The backed up file name is /u01/app/oracle/product/10gdb/agent10g/cfgtoollogs/configToolFailedCommands.bak
    INFO: Created a new file /u01/app/oracle/product/10gdb/oms10g/cfgtoollogs/configToolFailedCommands
    INFO: Since the option is to overwrite the existing /u01/app/oracle/product/10gdb/oms10g/cfgtoollogs/configToolFailedCommands file, backing it up
    INFO: The backed up file name is /u01/app/oracle/product/10gdb/oms10g/cfgtoollogs/configToolFailedCommands.bak
    SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
    1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
    2. Fix the errors causing these failures.
    3. Select the failed assistants and click the 'Retry' button to retry them.
    INFO: User Selected: Yes/OK

    It could be due to many reasons.
    Do you have a folder em under /tmp ? Try to remove or rename it, and (if it's not too late) click on retry.
    Nicolas.

Maybe you are looking for