10gr2 on solaris 10
I am trying to to install oracle 10gr2 on solaris10 86-64 as part of the prerequisite i found that there are some patch info that need to be verified. using the "/usr/sbin/patchadd -p" command.
one of the result i had was as below
Patch: 119961-02 Obsoletes: Requires: Incompatibles: Packages: SUNWsprot
Patch: 119961-04 Obsoletes: Requires: Incompatibles: Packages: SUNWsprot
I was wondering if the above could interrupt my installation.
pls can you advice.
thanks
Hi
Yes could have some incidents
Packages to be installed
SUNWarc
SUNWbtool
SUNWhea
SUNWlibm
SUNWlibms
SUNWsprot
SUNWtoo
SUNWi1of
SUNWi1cs
SUNWi15cs
SUNWxwfnt
All installations The following operating system patches:
-118345-03 SunOS 5.10_x86: ld Patch
-119961-01 SunOS 5.10_x86, x64: Patch for assembler
See that document http://download.oracle.com/docs/cd/B19306_01/install.102/b15704/pre_install.htm#sthref110
Similar Messages
-
Oracle 10gR2 on Solaris 10-Disk space question
I am going to install Oracle 10gR2 on Solaris 10 (x86). I need some advice on Disk space allocations. Altogether i've 10GB allocated for both Solaris and Oracle in VMware. My current allocation is this:
/ ----------->6177mb
swap---------->1024mb
/tmp ----------> 400mb
/export/home------->2570mb
Is this enough to install a Basic Oracle Database? I am going to use it only for learning purposes.It is Ok to start, but I suggest you to read the:
Oracle® Database Installation Guide
10g Release 2 (10.2) for Solaris Operating System (x86)
Part Number B15697-01
for further requirements and a complete step by step guide.
~ Madrid. -
ERROR install oracle database 10gR2 in solaris sparc 64
Dear All,
I got error when installing oracle database 10gR2 on solaris sparc 64.
these are the messages:
/usr/ccs/bin/make -f ins_precomp.mk relink ORACLE_HOME=/usr/app/oracle/product/10.2.0/db_1 EXENAME=proc/Linking /usr/app/oracle/product/10.2.0/db_1/precomp/li
b/proc
ld: fatal: file /usr/app/oracle/product/10.2.0/db_1/lib32/libclntsh.so: unknown file type
ld: fatal: File processing errors. No output written to /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc
*** Error code 1
The following command caused the error:
echo "Linking /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc"; \
rm -f /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc; \
/usr/ccs/bin/ld -o /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc -L/usr/app/oracle/product/10.2.0/db_1/precomp/lib/ -L/usr/app/oracle/product/10.2
.0/db_1/lib/ -dy /usr/app/oracle/product/10.2.0/db_1/lib/prod/lib/v9/crti.o /usr/app/oracle/product/10.2.0/db_1/lib/prod/lib/v9/crt1.o /usr/app/oracle/product
/10.2.0/db_1/lib/s0main.o /usr/app/oracle/product/10.2.0/db_1/precomp/lib/pdc.o /usr/app/oracle/product/10.2.0/db_1/precomp/lib/pds.o /usr/app/oracle/product/
10.2.0/db_1/precomp/lib/libproc2.a /usr/app/oracle/product/10.2.0/db_1/lib/libslax10.a /usr/app/oracle/product/10.2.0/db_1/precomp/lib/libpgp.a -lpls10 -lplp
10 /usr/app/oracle/product/10.2.0/db_1/lib/libplc10.a -lsnls10 -lunls10 -lnls10 /usr/app/oracle/product/10.2.0/db_1/rdbms/lib/kpudfo.o -lclntsh `cat /usr/ap
p/oracle/product/10.2.0/db_1/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /usr/app/oracle/product/10.2.0/db_1/lib/
ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lsnls10 -lnls10 -lcore10
-lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /usr/app/oracle/product/10.2.0/db_1/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /usr/app/oracle/product/10.2.0/db_1/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10
-lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lpls10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -
lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lsnls10 -lnls10 -lcore10 -lsnls10
-lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /usr/app/oracle/product/10.2.0/db_1/lib/sysliblist` -R
/opt/SUNWcluster/lib/sparcv9:/usr/app/oracle/product/10.2.0/db_1/lib:/opt/ORCLcluster/lib/ -Y P,:/opt/SUNWcluster/lib/sparcv9:/opt/ORCLcluster/lib/:/usr/ccs
/lib/sparcv9:/usr/lib/sparcv9 -Qy -lc -laio -lposix4 -lm /usr/app/oracle/product/10.2.0/db_1/lib/prod/lib/v9/crtn.o; \
/bin/chmod 755 /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc
make: Fatal error: Command failed for target `/usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc'
/usr/ccs/bin/make -f ins_precomp.mk relink ORACLE_HOME=/usr/app/oracle/product/10.2.0/db_1 EXENAME=proc/Linking /usr/app/oracle/product/10.2.0/db_1/precomp/li
b/proc
ld: fatal: file /usr/app/oracle/product/10.2.0/db_1/lib32/libclntsh.so: unknown file type
ld: fatal: File processing errors. No output written to /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc
*** Error code 1
any help would be appreciate.
Thank you
Regards,
SpiritI'm not sure with the solaris sparc 64.
but the most common problem with Linux x86_64 which I assume probably similar. that type of error caused by
you have to install glibc-devel-32 bit and libstdc++-devel 32 bit together with your 64 bit. both libraries required by the Oracle to solve the linking problem.
http://forums.oracle.com/forums/thread.jspa?messageID=1254866
probably it will help you.
sorry, this is just my guessing of your problem.
thanks -
Error installing Oracle 10gR2 on Solaris Express Developer Edition
Hi
I'm trying to install Oracle Db 10gR2 on Solaris Express Developer Edition 1/08 for x86 but it fails with the following link error:
INFO: /export/home/u01/app/oracle/oracle/product/10.2.0/db_1/bin/genclntsh
INFO: ld: fatal:
INFO: symbol `ntcontab' in file /export/home/u01/app/oracle/oracle/product/10.2.0/db_1/lib/libn10.a(ntcontab.o): section [3] .data: size 0x60: symbol (address 0, size 0x70) lies outside of containing section
INFO: ld:
INFO: fatal:
INFO: File processing errors. No output written to
INFO: /export/home/u01/app/oracle/oracle/product/10.2.0/db_1/lib/libclntsh.so.10.1
INFO:
INFO: genclntsh: Failed to link libclntsh.so.10.1
INFO: *** Error code 1
INFO: make: Fatal error: Command failed for target `client_sharedlib'
Any ideas would be appreciated.
ThanksIf your version of Solaris is not supported, see the support matrix, you are on your own. This is likely the case.
-
Error on Installing 10gr2 on solaris 8
Hi ,
I am Installing Oracle 10gR2 on Sun Sparc server with Solaris 8 installed.
I had installed all the required packages on it. But while installation links the files it gives the error, the output from the install log is :-
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: Linking /oracle/home/app/product/10.2.0/Db_1/precomp/lib/proc
INFO: ld.so.1: ld: fatal: libld.so.4: open failed: No such file or directory
ld.so.1: ld: fatal: relocation error: file /usr/ccs/bin/sparcv9/ld: symbol ld64_main: referenced symbol not found
INFO: make: Fatal error:
INFO: *** Error code 137
INFO: Command failed for target `
INFO: /oracle/home/app/product/10.2.0/Db_1/precomp/lib/proc'
INFO: End output from spawned process.
The Ld is found in path /usr/ccs/bin but still it is giving error, so can anybody help me to how to link this ld properly to complete the installation.
Thanks
HardipHi Friends,
I made a Fresh Install of Solaris 10 on my Machine and updated all the latest patches. Now the Oracle 10g Installation worked fine without any error.
Thanks
Hardip -
10gR2 under Solaris 10: Error creating sample database
I am attempting to install 10gR2 on a Sun Ultra 10 Sparc workstation running Solaris 10. I successfully configured the ASM drives and loaded the software, and am now attempting to install the actual database software.
While the installer is running the Database Configuration Assistant, the second "recommended" configuration program, I get an error almost halfway through that says "ORA-19879: error reading backup piece". Looking through the logs kept by the Assistant, I find this entry:
Grant succeeded.
20061228 03:17:09
1 row selected.
old 30: dbms_backup_restore.restoreDataFileTo(data_file_id,'&data_file_name');
new 30: dbms_backup_restore.restoreDataFileTo(data_file_id,'/u01/app/oracle/product/10.2.0/db_1/assistants/dbca/templates/example.dmp');
old 33: dbms_backup_restore.restoreBackupPiece('&data_file_backup', done);
new 33: dbms_backup_restore.restoreBackupPiece('change_on_install', done);
Allocating device....
Specifying datafiles...
Specifing datafiles...
Restoring ...
declare
ERROR at line 1:
ORA-19624: operation failed, retry possible
ORA-19870: error reading backup piece
/u01/app/oracle/product/10.2.0/db_1/dbs/change_on_install
LRM-00116: syntax error at 'tablespaces' following '='
IMP-00022: failed to process parameters, type 'IMP HELP=Y' for help
IMP-00000: Import terminated unsuccessfully
ORA-19505: failed to identify file
"/u01/app/oracle/product/10.2.0/db_1/dbs/change_on_install"
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
ORA-06512: at "SYS.DBMS_BACKUP_RESTORE", line 5146
ORA-06512: at line 33
I couldn't find anything wrong in "example.dmp", and I couldn't find "change_on_install" in the directory listed, even while the error window was still on the screen. Most of the errors in the log following this fragment have to do with tablespace EXAMPLE not being there.
Someone else with a similar problem solved it by installing the database software without the sample databases. I'll give that a try tomorrow, but I'd still like to know where I'm even supposed to look to find the problem I had above.
Thanks,
Mike McCormickOkay, I've found at least one source for this problem. There is a script called mkplug.sql in the demo/schema directory that had a line that began "host imp .....". 'imp' is in the db_1/bin directory, which the PATH variable does not yet point to.
So, my question now is whether I should change "host imp..." to "host $ORACLE_HOME/bin/imp..." in all the files it appears in (sted_mkplug.sql and sdoepsgv.sql, as well as mkplug.sql), or add $ORACLE_HOME/bin to the PATH variable manually.
What I'm going to try is to deinstall the database, scrap the directories, then reload the software only. After that, I'll edit the files in the demo directory and use dbca to create the demo directories.
Mike McCormick -
Oracle 10gR2 on Solaris 10 - Zoned Machine getting ORA-27102 Errors
Getting Memory issues in Solaris 10. I have configured the database to have only 2GB of SGA, but still getting ORA-27102 and also when we look at top command it seems all the memory is not available. The machine is divided into two zones, machine has 32 GB memory and has 8 processors. The shared memory settings I have done is 8 GB max.
Any help in this regard would be helpful. Is anything special needs to be done in zones ?
Thanks,
Atul
And these are the details of prctl $$
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
process.max-port-events
privileged 65.5K - deny -
system 2.15G max deny -
process.max-msg-messages
privileged 8.19K - deny -
system 4.29G max deny -
process.max-msg-qbytes
privileged 64.0KB - deny -
system 16.0EB max deny -
process.max-sem-ops
privileged 512 - deny -
system 2.15G max deny -
process.max-sem-nsems
privileged 512 - deny -
system 32.8K max deny -
process.max-address-space
privileged 16.0EB max deny -
system 16.0EB max deny -
process.max-file-descriptor
basic 256 - deny 12615
privileged 65.5K - deny -
system 2.15G max deny -
process.max-core-size
privileged 8.00EB max deny -
system 8.00EB max deny -
process.max-stack-size
basic 8.00MB - deny 12615
privileged 8.00EB - deny -
system 8.00EB max deny -
process.max-data-size
privileged 16.0EB max deny -
system 16.0EB max deny -
process.max-file-size
privileged 8.00EB max deny,signal=XFSZ -
system 8.00EB max deny -
process.max-cpu-time
privileged 18.4Es inf signal=XCPU -
system 18.4Es inf none -
task.max-cpu-time
system 18.4Es inf none -
task.max-lwps
system 2.15G max deny -
project.max-contracts
privileged 10.0K - deny -
system 2.15G max deny -
project.max-device-locked-memory
privileged 1.96GB - deny -
system 16.0EB max deny -
project.max-port-ids
privileged 8.19K - deny -
system 65.5K max deny -
project.max-shm-memory
privileged 7.40GB - deny -
system 16.0EB max deny -
project.max-shm-ids
privileged 128 - deny -
system 16.8M max deny -
project.max-msg-ids
privileged 128 - deny -
system 16.8M max deny -
project.max-sem-ids
privileged 128 - deny -
system 16.8M max deny -
project.max-crypto-memory
privileged 7.84GB - deny -
system 16.0EB max deny -
project.max-tasks
system 2.15G max deny -
project.max-lwps
system 2.15G max deny -
project.cpu-shares
privileged 1 - none -
system 65.5K max none -
zone.max-lwps
system 2.15G max deny -
zone.cpu-shares
privileged 1 - none -
system 65.5K max none -There is no trace files to look at . Alert log does not have entry and bdump & udump does not have any trace file.
I was more interested to know, if somebody has installed Oracle 10 on Solaris 10 with a zone or container in solaris. What parameter settings was done on unix setting was it only shared-memory defined, if anybody has come accross memory issues in the machine after installing Oracle 10 with Solaris 10, and the machine has been zoned in two or more zones.
Thanks,
Atul -
DBCA (10gR2) in solaris 10 doesn't create DB, has 0 errors
Hi,
I have oracle 10.2.0.1 installed on a Solaris 10 SPARC box, and am trying to create a database. When I installed Oracle, I originally opted to create a new database, but when it got to the DBCA section, the installer seems to pause with the results stating it's "in progress...". I stopped the installer, and cancelled the install. On checking the logs, there were no errors, it just seems to stop (even if I leave it for 14+ hours) with the last lines of the log being:
INFO: Configuration assistant "Oracle Net Configuration Assistant" succeeded
INFO: Command = /export/home/oracle/product/10.2.0/Db_3/bin/dbca -progress_only
-createDatabase -templateName General_Purpose.dbc -gdbName orcl -sid orcl -sy
sPassword 052b3cccab83184dd1ba5e728aa1ff1e189a90088c2da70291 -systemPassword 05
3e5dc6ab23642c16821c915b858ddc23d87c4a357e140d8e -sysmanPassword 05b123a3abe329
68b37230926a9bfc13f4d4ef5e52f01e095d -dbsnmpPassword 058be1aeaba392a9299e7d3d82
15720402fe045d76a03d4506 -emConfiguration LOCAL -datafileJarLocation /expor
t/home/oracle/product/10.2.0/Db_3/assistants/dbca/templates -datafileDestinatio
n /export/home/oracle/product/10.2.0/oradata/ -responseFile NO_VALUE -characte
rset WE8ISO8859P1 -obfuscatedPasswords true -sampleSchema true -oratabLocatio
n /export/home/oracle/product/10.2.0/Db_3/install/oratab -recoveryAreaDestinati
on NO_VALUE
Then I installed Oracle without creating a db thinking I could create a database alone with DBCA. The installer completed successfully, but dbca isn't completing at all. It launches fine, I can progress through all the steps/panes no problems. When I get to the last pane to select db creation options, I have "Create Database" and "Generate Database Creation Scripts" checked, then I click Finish. A window opens with a summary, I click OK and that window closes. Then nothing happens. Nothing at all. No errors in the terminals, and I'm looking at the last pane of the DBCA as if it didn't do anything at all. I can uncheck the creation options and click Finish again, but I get no notification windows, and the app just seems to be open, but not doing anything. I can "Cancel" out of it though. No scripts directory is added either.
Any suggestions on how I can create a db??
Thanks!Hello there,
I know this topic is quite old now but maybe my solution would help someone else...
I met the exact same problem than user10494040. I'm running Debian Etch (but the problem was the same with a Lenny) which was installed from a netinstall CD, and on which I've met all the prerequisites given by Oracle ( [Configuring Linux for the Installation of Oracle Database 10g|http://www.oracle.com/technology/obe/obe10gdb/install/linuxpreinst/linuxpreinst.htm] )
It was impossible for me to successfully complete the Oracle installation when the database creation option was selected in OUI, as well as the Basic Installation or the Advanced one was choosen.
I've done many tests and each time I unselected the database creation option, the installation completed successfully. So I decided to try to create my database using DBCA in command line, using the command automatically generated by OUI and on which the installation froze, just adding to it the -silent option and removing the -progress_only one.
Note :_ if your installation really freeze on the database creation command, you can also find the DBCA command automaticaly generated in the log file of the installation (available in the folder oraInventory/logs/installActions####.log where #### is the date you attempted to make your installation).
For example, with the command given by user10494040 it would looks like :
# dbca -silent -createDatabase -templateName General_Purpose.dbc -gdbName orcl -sid orcl -sysPassword 052b3cccab83184dd1ba5e728aa1ff1e189a90088c2da70291 -systemPassword 053e5dc6ab23642c16821c915b858ddc23d87c4a357e140d8e -sysmanPassword 05b123a3abe32968b37230926a9bfc13f4d4ef5e52f01e095d -dbsnmpPassword 058be1aeaba392a9299e7d3d8215720402fe045d76a03d4506 -emConfiguration LOCAL -datafileJarLocation /export/home/oracle/product/10.2.0/Db_3/assistants/dbca/templates -datafileDestination /export/home/oracle/product/10.2.0/oradata/ -responseFile NO_VALUE -characterset WE8ISO8859P1 -obfuscatedPasswords true -sampleSchema true -oratabLocation /export/home/oracle/product/10.2.0/Db_3/install/oratab -recoveryAreaDestination NO_VALUE
Of course, launch this command loggued as oracle, and make sure your $ORACLE_HOME is well set.
This trick worked for me, I hope that would help someone else :-) -
ORA-27102: out of memory. Faild to install oracle 10gR2 on Solaris 10
Hi, I want to install oracle on my solaris machine. I have 2.5G RAM and more than 5G swap file. But the ORA-27102: out of memory error occurred at installing the Oracle Database Configuration Assistant step(Copying database files Creating and starting Oracle instance).
The only warnings bellow:
Checking kernel parameters
Checking for BIT_SIZE=64; found BIT_SIZE=64. Passed
Checking for shmsys:shminfo_shmmax=4294967295; found no entry. Failed <<<<
Checking for shmsys:shminfo_shmmni=100; found no entry. Failed <<<<
Checking for semsys:seminfo_semmni=100; found no entry. Failed <<<<
Checking for semsys:seminfo_semmsl=256; found no entry. Failed <<<<
Check complete. The overall result of this check is: Failed <<<<
Problem: The kernel parameters do not meet the minimum requirements (see above).
What's the reason and how may I resolve it?
Thanks!I set some kernel parameters like: set shmsys:shminfo_shmmax=4294967295 and so on. Restart the computer and run dbca+ and configure in advance mode. There's a stage require the size of flash_recover_segment of which the default size number is 2048M. WOW, out of memory on my pc of course.
So I think it's the parameter value during the installation progress bring on the ORA-27102 problem. However, during the first installation, there's no prompt for me to enter the parameter; or I didn't see. -
Cold backup of High Availability DB 10gR2 in SOLARIS 8 SPARC
Hi
I want to know the procedure of taking Cold backup in Solaris 8 SPARC in
High Availability Environment.
Any reference document will be helpful.
Thanks in advance.
RenukaThat seems to be a contradiction in terms, high availibility and cold backup. When you do a cold backup the database is down and not available. In a primary - standby configuration, you could switch the standby to primary, shutdown the (former) primary and perform a cold backup of it.
-
Uninstall & Reinstall RAC (10GR2) on Solaris 10 SPARC
Hi,
I'm trying to install 2 node RAC. I got below errors while executing "root.sh" at the end of installation on both nodes.
[client(19083)]CRS-1011:OCR cannot determine that the OCR content contains the latest updates.
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
2011-06-09 18:37:58.698: [ OCRCONF][1]ocrconfig starts...
2011-06-09 18:37:58.701: [ OCRCONF][1]Upgrading OCR data
2011-06-09 18:37:59.363: [ OCRRAW][1]propriogid:1: INVALID FORMAT
2011-06-09 18:37:59.363: [ OCRRAW][1]proprioini: disk 0 (/dev/rdsk/emcpower5e) doesn't have enough votes (1,2)
2011-06-09 18:37:59.376: [ OCRRAW][1]proprinit: Could not open raw device
2011-06-09 18:37:59.376: [ default][1]a_init:7!: Backend init unsuccessful : [26]
2011-06-09 18:37:59.377: [ OCRCONF][1]Exporting OCR data to [OCRUPGRADEFILE]
2011-06-09 18:37:59.377: [ OCRAPI][1]a_init:7!: Backend init unsuccessful : [33]
2011-06-09 18:37:59.377: [ OCRCONF][1]There was no previous version of OCR. error:[PROC-33: Oracle Cluster Registry is not configured]
2011-06-09 18:37:59.393: [ OCRRAW][1]propriogid:1: INVALID FORMAT
2011-06-09 18:37:59.393: [ OCRRAW][1]proprioini: disk 0 (/dev/rdsk/emcpower5e) doesn't have enough votes (1,2)
2011-06-09 18:37:59.394: [ OCRRAW][1]proprinit: Could not open raw device
2011-06-09 18:37:59.394: [ default][1]a_init:7!: Backend init unsuccessful : [26]
2011-06-09 18:37:59.409: [ OCRRAW][1]propriogid:1: INVALID FORMAT
2011-06-09 18:37:59.409: [ OCRRAW][1]proprioini: disk 0 (/dev/rdsk/emcpower5e) doesn't have enough votes (1,2)
2011-06-09 18:37:59.410: [ OCRRAW][1]proprinit: Could not open raw device
2011-06-09 18:37:59.410: [ OCRAPI][1]a_init:6b!: Backend init unsuccessful : [26]
2011-06-09 18:37:59.410: [ OCRCONF][1]Failed to initialized OCR context. error:[PROC-26: Error while accessing the physical storage]
2011-06-09 18:37:59.411: [ OCRCONF][1]Exiting [status=failed]...
The permissions for OCR disks on both the nodes were "root:dba" and the disks was accessible across the nodes.
I'm not sure why we got that error.
To over come it, I'm going as below:
- rootdelete.sh on both nodes
- rootdeinstall on node 1
- uninstall using OUI
- remove /var/opt/oracle/*
- remove oracle_home
- remove oraInventory
- format the disks
- reboot the nodes.
Just wanted to know if there's something else that should be done.
thanksI strongly advise against uninstalling Clusterware without first making a serious attempt to troubleshoot what went wrong and trying to fix the errors. If you unistall and retry without knowing what to do differently, you will have hardly any choice but to repeat the same steps that led to the errors in root.sh
>
The permissions for OCR disks on both the nodes were "root:dba" and the disks was accessible across the nodes.
>
That could be your error right there. The installation instructions say to put the voting disk in the dba group, but to put the cluster registry in the oinstall group. Quoting from page 4-7 of the Clusterware and RAC installation guide:
http://download.oracle.com/docs/cd/B19306_01/install.102/b14205.pdf
>
– The voting disk is a partition that Oracle Clusterware uses to verify cluster
node membership and status.
The voting disk must be owned by the oracle user, must be in the dba group,
and must have permissions set to 644. Provide at least 20 MB disk space for
the voting disk.
– The Oracle Cluster Registry (OCR) contains cluster and database configuration
information for the RAC database and for Oracle Clusterware, including the
node list, and other information about cluster configuration and profiles.
The OCR disk must be owned by root, must be in the oinstall group, and
must have permissions set to 640. Provide at least 100 MB disk space for the
OCR. -
Oracle 10gR2 installation problem on Solaris (sparc-64 bit)
Hi All,
I am unable to install Oracle 10gR2 on Solaris, I cannot understand what is wrong could u anybody help me that,
Regards
Harpreet SinghI also have a similar problem, when I insert the key in my car sometimes it does not start. I cannot understand what is wrong could you help me?
Otherwise, It's been raining lately and our crystal ball's are somewhat foggy; therefore we cannot guess what is you problem. -
Creating a Non-RAC ASM 10gR2 instance in Solaris 10 (x86)
DB Version:10gR2
OS: Solaris 5.10 for x86 (Installation DVD released on June 2006)
I have decided to remove the windows installation in my old laptop.I am going to install only Solaris 10 (x86) in this to create an ASM instance.
My laptop has a single IDE Harddrive. Is it possible to create ASM slices on this ?Bjoern, Rajesh,
Thank your both very much.
Bjoern,
I have downloaded the latest solaris 10 for x86 (sol-10-u8-ga-x86-dvd.iso) from sun/oracle website . Need to write this to a DVD and test the installation.
Edited by: resistanceIsFruitful on May 13, 2010 5:50 AM -
Install oracle 10g r2 on solaris 5.10
i am very new to installition with unix please help me out
can some one advise me to install 10gr2 on solaris 5.10
i am looking complete information installition.
Thanks for helpHi,
http://www.dbspecialists.com/presentations/oracle10gsolaris.html
http://www.akadia.com/services/ora10_sol10_install.html
regards
Jafar -
Sun Solaris X86 and 10.2
Hello,
do anybody know when 10.2.0.1 for 10.2 Solaris x86 will be available?
I did not find any informations on metalink....
Thanks and RegardsHi,
Certification for 10gR2 on Solaris Operating System x86 Version 10 is planned for february 2006...
Nicolas.
Maybe you are looking for
-
Unable to find conditions in item level of STO PO
Hi All , The user raised Stock transfer PO(UB) between plant Xand Y in same company code , doc type UB assigned to pricing schema XYZ.. in customizing . However conditions and pricing procedure are not picking in PO item . Please help us. Regards, A
-
How can I insert a C++ programm in labview 5.1;
I am using Labview 5.1 to read data from sensors (analog input), but I would like to read data from a serial RS232 port. How I can do this;If I write a C++ program, how can I insert this in labview;
-
Reading Mail ... Want Larger ( bad eyes )
I went to system preferences as ( Mail Help ) directed and changed the font in the Message List Font - which changes the viewing size of all my mail "Received" and then I changed the Message Font - which changes the information about " The Who From,
-
How do I recover itunes I deleted by mistake?
I deleted some of my itunes in my music library by mistake. I went to the recycle bin and restored those I wanted back. When I returned to ITUNES they were not there. Is there a trick to getting these back?
-
Calling webservices from ABAP via https/ssl with p12 certificates.
Hi all, I have a problem with calling an external webservice via HTTPS. I configured my system as indicate in the blog /people/jens.gleichmann/blog/2008/10/31/calling-webservices-from-abap-via-httpsssl-with-pfx-certificates but when I check the RFC c