10gR2 to 11gR1 on win2k3R2 with new Hardware

I am going to upgrade from 10gR2 ee to 11gR1 ee on new hardware.
Both are win2k3R2 32bit.
I would like to only install 11gR1 software on the new box and drives.
My question.
Do I only have the exp/imp option to move the db or can I copy (backup/restore) the tablespaces and use DBUA?
Does anyone have any experiance with a bare metal upgrade? I have done the exp/imp before and it works but is very tedious.
Thanks,
Bob

if you use either export/import or the Datapump it is a feasible solution if the amount of data is reasonable manageable, otherwise you have a non-scalable solution.
If you don't want to install both 10g and 11g on your new hardware, you could install 11g on your old hardware, then perform the upgrade process there and move the database files to the new hardware platform.
You can also use the transportable tablespace feature to move create a 10g transportable set and plug it into the 11g database.
Ref. Compatibility and New Features when Transporting Tablespaces with Export and Import
Doc ID: Note:291024.1
~ Madrid
http://hrivera99.blogspot.com/

Similar Messages

Migration from 7.0.2-10000 to 9.1.1 with new Hardware

Hello,
a customer from us wants to upgrade from Version 7.0.2-10000 to the new CUCM 9.1.1.
I know that we have to use new hardware.
My plan is the following:
- Update all needed phone firmware to the latest in 7.0.2
- Install the patch ciscocm.refresh_upgrade_v1.1.cop.sgn
- Install Version 9.1.1 on the old hardware
- Take a backup from the installed 9.1.1 on the old hardware
- Install the 9.1.1 on the new hardware
- Restore the taken Backup from the old hardware with the new Version
- Do the licensing stuff
- Great all things are running...
Can someone apply this way to migrate??
Thanks a lot...
Christian

If you want to avoid the phone FW upgrade after going to 9.1.1, upgrade to the same loads on your current version so you can control the upgrade process and do it with small groups of phones at a time.
Other than that,if your MCS supports the target version, you're good to go with that plan.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Bootcamp Issues: XP Frozen with New Hardware Found screen

I've installed bootcamp on an Imac with MacOS 10.6.4. This went fine. Then I installed XP. This went fine as well. Then I inserted a Mac OX X Snow Leopard 10.6.4 disk to install the Boot Camp Drivers for Windows. But XP is just frozen with the "Found New Hardware Wizard" screen. Nothing happens.
The Mac OS Snow Leopard 10.6.4 disk is not the one that came with the Imac. We don't have that disk. Could this be the problem?
If so, what can be done at this point?

Hi and welcome to Discussions,
RichScherl wrote:
I've installed bootcamp on an Imac with MacOS 10.6.4. This went fine. Then I installed XP. This went fine as well. Then I inserted a Mac OX X Snow Leopard 10.6.4 disk to install the Boot Camp Drivers for Windows. But XP is just frozen with the "Found New Hardware Wizard" screen. Nothing happens.
The Mac OS Snow Leopard 10.6.4 disk is not the one that came with the Imac. We don't have that disk. Could this be the problem?
That could indeed be the problem. What OSX disc are you using ? A retail bought one ? Or one that came with another Mac ?
If so, what can be done at this point?
Best would be to call Apple while having the serialnumber of your iMac at hand and ask for replacement OSX discs.
Usually Apple sends them to you for a relativlely small fee.
Since you also need the OSX disc for basic troubleshooting tasks it is vital to have one.
Regards
Stefan

Authorization issue with new hardware install

I recently had a motherboard go bad. I replaced the MB and processor and installed the original HD which had survived the failure. After setting up the machine with its new hardware, I turned on Itunes. It asked for a password to authorize the computer. I typed in the password and Itunes became functional but it now says I have three computers authorized when I only have two. Perhaps I should have asked the question before authorizing the same machine twice but I did not realize that that was what I was doing. Is there a way to solve this problem?

arequai wrote:
I recently had a motherboard go bad. I replaced the MB and processor and installed the original HD which had survived the failure. After setting up the machine with its new hardware, I turned on Itunes. It asked for a password to authorize the computer. I typed in the password and Itunes became functional but it now says I have three computers authorized when I only have two. Perhaps I should have asked the question before authorizing the same machine twice but I did not realize that that was what I was doing. Is there a way to solve this problem?
This happens from time to time and nothing we can do to ever predict the outcome with technology in knowing our machines that will be used.
iTunes Stores allows you to Authorize 5 total machines. Once this 5 is reached if you have access to any of the machines you can de-authorize them.
What do I do when I no longer have access to this Machine?
Once a year iTunes Store Support will allow you to reset permissions for all the accounts.
This is Typically accessed via the following and is available once you reached your 5 machine limit.
iTunes Menu Bar - Store - View My account - Confirm Password - De-authorize All computers
This will reset the count to 0. And you can start fresh.
Personally I would not worry too much about it till you reach 5. Otherwise you got to wait a full year to perform the action again.
About iTunes Store authorization and de-authorization
http://support.apple.com/kb/HT1420

Suspend MDT, Sysprep for disk cloning, and resume with new hardware failure.

I am able to successfully Sysprep for disk cloning after pausing the Deployment (via LTISuspend). The problem is when I attempt to resume the Deployment after duplicating the hard drive and placing in new hardware it fails immediately stating that it cannot
open the TSENV.DAT (80090005). It works fine if you resume in the identical hardware it was built in.
The hardware is identical for all computers receiving the cloned drive with the Mac Address, Serial Number, and UUID being different.
Knowing that the TSENV.DAT is encrypted, is there a way to prep it for minor hardware (mac address, uuid, and serial number only) change prior to pausing and sysprep so it does not fail?
Using MDT 2012 and Windows 7 OS.
Thanks

Let me add to what Mr. Owen described.
We have a complex MDT. It has been used for years for a globally scaled corporate desktop.
What we are looking to do to is sysprep this machine 3/4 of the way through the process, clone the drive, and then use the cloned drive on like hardware models (we used PersistDrivers in the Unattend).
I initially ran sysprep outside of the MDT. It ran successfully, however when we moved the syspreped (and cloned) drive to another hardware of identical type we got the error Mr Owen mentioned. What we hoped would happen if we called Sysprep from
the MDT directly is the TSENV would be cleaned/updated to remove any workstations specific identifiers and thus eliminate the error.

10G - 11G with New Hardware

Hi,
I am looking to move my current Oracle 10G R2 (x32) DB from a physical Server to a new Virtual Server with Oracle 11G (x64) installed. I have installed the new OS onto the Virtual Host along with the latest 11G. My question is what is the best solution to get all my data over to the new DB? Will I need to create the table space and schema again? How about the Oracle users with permissions. Any help would be greatly appreciated. I am doing this on a Development System for testing before I even consider this on or Production System.

Hi,
In addition to information provided also refer MOS tech notes:
*How to Perform a Full Database Export Import during Upgrade, Migrate, Copy, or Move of a Database [ID 286775.1]*
Different Upgrade Methods For Upgrading Your Database [419550.1]
thanks,
X A H E E R

Sync with new hardware

HD crash killed my PowerMac's Maxtor HD. New HD installed. No backup.
Apparently, the photos and iTune songs on an iPhone can't be synced back to the computer.
Anyone know of a way to export photos and songs from an iPhone to a media type that can then be imported into iPhoto and iTunes, respectively?
Thanks,

In regards to iTunes content, an iPhone can be synced with an iTunes library on a single computer only. The sync process for iTunes content is a one way transfer process only - from your computer to your iPhone, and the same applies to photos transferred from your computer to your iPhone via the iTunes sync process. Photos transferred from your computer to your iPhone via the iTunes sync process are optimized for viewing on your iPhone as part of the transfer process, so the original resolution of these photos is lost.
iTunes includes an option to transfer iTunes content from an iPod or iPhone that was purchased from the iTunes store, but this is for iTunes content that was purchased from the iTunes store only.
With your iPhone connected and without syncing, at the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPhone.
There are 3rd party utilities available that provide for transferring iTunes content that was not purchased from the iTunes store and the same for photos that were transferred from your computer, but such utilities are not supported by Apple, and the original resolution of these photos will be lost.
The iPhone is not designed nor intended to be a backup device, and should not be considered as such. This is one of the reasons why maintaining a backup of the important data on your computer's hard drive which should include your iTunes library and photos stored on your computer's hard drive is so important.

Problems with new hardware

i just installed a new mobo and cpu. my specs are now as follows
K8N Neo2 Platinium
Athlon64 3500+
1024Mb RAM pc2700
x800 pro video
western digital HD 80G
antec PSU 380W
i did a fresh install of windows and everything booted okay.
i then let it remain idle for 1.5 hours while running motherboard monitor.
with which these averages came up
case = 30c / cpu = 32c / core0 = 1.44v / core1 = 3.25v / +3.3 = 3.10v /
+5.00 = 4.94v / +12.00 = 1.60v / -12.00 = -167.33v / -5.00 = -6.80v
somehow i don't think the 12 rail should be that way. what should it by running
at and what should i do to fix it? thanks.

Wonkanoby, is of course right those figures are nonsence.
Is corecentre running as well. If so it might be interfering.
have you got latest version MBM 5 HomeSite
An alternative similar product is SpeedFan Home page
luck

My itunes will not detect any devices. When i do plug in a device it comes up with new hardware found then asks me to install it as a digital still camera. I have uninstalles and reinstalled itunes but that didnt help

Plaese help

too funny i wrote this and literally 1 minute later found a post that hrlped fix it. deleting the iTunes folder in the following location.
C:\Users\(usrname)\AppData\Roaming\Apple Computer

WiFi no longer working with new Time Capsule-can you help please?

Hi all,
Just received my new Time Capsule (TC). It was a little problematic setting up, but probably due to my now choosing to increase my security from WEP to WPA as the TC set-up assistant suggests. Since then, I have had numerous problems getting my other computers and now my iPhone to connect with WiFi.
The problem is that despite entering all the new settings and WPA passwords for my connection with the TC, the iPhone will either momentarily recognize and go to wifi or simply stay on Edge.
On the former, with wifi active, as soon as I go to iTunes, Safari or check email, it reverts to Edge. On the latter, despite resetting, entering password, or tapping Settings and selecting my wifi connection, it will NOT connect and stays on Edge.
(Now, I'm on Edge! I'm bummed that with new hardware I have new problems that didn't exist before!)
Can someone who had this same problem tell me how they resolved it.
Here's the one clue I have, but would rather not resort to: When I first set up the TC, I had it on WEP with a WDS Network, and everything was working great and FAST! Now that I have increased the security—I will be backing up 3 computers to the TC—my iPhone and other computers seem to have intermittent or no wifi connection as a result.)

Irving Gonzales,
If your computers are 802.11N capable, you might want to try an advanced setup that might help your Time Machine speeds some. I have not personally tested it, so it is just a personal theory at this point.
First, in a mixed environment the 802.11N clients all get slowed down.
First, configure the TC for 802.11N only.
Second, connect the Airport Express via ethernet to the Time Capsule
Third, configure the Airport Express for bridged mode (doesn't give out IP addresses), and for its own wireless network with a different name than the Time Capsule.
Have any 802.11b/g clients like the iPhone join the Airport Express' network.
Thank you,
Nathan C.

Migrating 10g disco to new linux server(new hardware)

We are planing to migrate 10g discoverer applications to new hardware with same OS,
source os: OEL4.7 and target OS: 4.7(with new hardware), how to make it...?
EBS : 11.5.10.2 with 11g R2 DB .
any references notes or links appreciate it.

any references notes or links appreciate it.10 Cloning Application Server Middle-Tier Instances
http://docs.oracle.com/cd/B14099_19/core.1012/b13995/cloning.htm
Thanks,
Hussein

I did not deactivate a photoshop cs6 before there was a new hard drive installed with a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be

I did not deactivate a photoshop cs6 before there was a new "C" hard drive installed on my computer and a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be appreciated.

If it's the same machine (same CPU) there should not be any need to activate. The actiovation is tied to your CPU.
If you run into problems, then:
Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option. 1 (800) 833-6687
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

Can't insert a CD/DVD into the disc drive. Recently installed a new harddrive, and the CD/DVD drive hardware is no longer recognized. Also, with new harddrive, OS was updated from Snow Leopard to Mt. Lion 10.8.5 on late 2007 MBP.

Can't insert a CD/DVD into the disc drive. Recently installed a new 1 tb hard drive, and the CD/DVD drive hardware is no longer recognized. Also, with new hard drive, OS was updated from Snow Leopard to Mt. Lion 10.8.5 on late 2007 MBP (2.2 GHZ Intel Core 2 Duo. 4 GB 667 MHZ DDR2 SDRAM)

Also, when I check out the hardware list, under Disc Burning - the following is reported: No disc burning device was found. If the device is external, make sure it’s connected and turned on.
The disc drive worked fine prior to the HD upgrade and OS update to Mt. Lion.

Migration of old system with new version and 64bit hardware

HI Sapguru's,
Our req: Build New CRM system with all latest version of software & 64 bit hardware. Details mentioned below.
Old System:
CRM 4.0 ABAP System
win 2003
Oracle 9i
non-unicode
32 bit hardware
New System( which i want to build):
CRM 5.2 (rampup version) ABAP+JAVA
win 2003
Oracle 10g
Unicode
64 bit hardware
Above mentioned is an new requirement for us.
Our Plan:
1. Old system -Conversion from non-unicode to Unicode system
2. Old system - System copy export method for create exports
3. Build New system with new unicode version(5.2) with Old system exports
Questions to Sapguru's:
1. Our plan will work or not?
a. If Yes - give me the guidelines ,Notes ,documentation paths
b. If No - Please provide your opinions/advices
2. 32 bit exports will work on 64 bit hardware SAP system?
Thanks Advance.
Regards,
Ramu,

Hello Markus,
Thanks for your quick response!!!!
I understood - what you have mentioned for my question but i have one clarification on your answer and one new questions to you.
Clarification:
My oldsystem is non-unicode system. As you said i will do system copy export method on old system(non-unicode) then i will use that exports(non-unicode) to build new system.
Here my clarification is:
Will that exports(non-unicode) work while installing new system with unicode? or Will it give any problem?
Question:
1. will old system with oracle 9i exports work on new system with oracle 10g?
Thanks Advance,
Bhaskar Rapelli

Does the 7th generation nano consist of new hardware or is it the 6th generation with a new software update?

Does the 7th generation nano consist of new hardware or is it the 6th generation with new software?

It is a 6th gen that currently comes with 1.1 that you update to 1.2. Also sells for a lower cost and doesn't require you to pay more for the nike+ kit.
https://discussions.apple.com/message/16297530#16297530

10gR2 to 11gR1 on win2k3R2 with new Hardware

Similar Messages

Maybe you are looking for