10Gr3 OSB business service is unable enqueue to 11Gweblogic server

Hi
we have configured business ervice in 10GR3 OSB to send the message to the queue which is on 11G weblogic server(10.3.1) and always geting the error
connection not found jms://remotIPaddress:7001/cnf/Qjndiname.
any help regarding this would be great.
Thanks,
Narasimha.

Hey these are my configuration steps:
1.Created JMs module and targeted to wlsbJMSServer
2.Created subdeploymnet
3..Created CF and attached Subdeployment
4.Created Queue and attached Subdeployment
5.Created foreign server
with these values
JNDI Initial Context Factory:weblogic.jndi.WLInitialContextFactory
JNDI Connection URL:t3://remoteIPaddress:7001
JNDI Properties Credential:weblogic1
attached the same Subdeployment
under destinations:
created foreign destion with my local jndi name(created in step4) and remote jndi name
created foreign CF with my local CF jndi name(created in step3) and remote CF jndi name
and in business service endpoint selected the jms transport and uri is
jms://localhost:7001/jms.localCF/jms.LocalQJNDIname
this is enquing to my local queue but not to the remote queue.
pls help me out. its very urgent
Edited by: user13154768 on Jul 14, 2010 3:43 AM

Similar Messages

OSB Business Service Work Manager Doesnt Throttle

Hi,
I have a requrirement to throlle the number of concurrent requests going to an end point.
So i have used OSB business service where in i am calling an end point webservice, and configured a work manager in console and selected it in the dispatch policy
I deployed the workmanager on managed server. i specified max concurrent threads as 3.
I tried to test it and see that throttling doesnt really work.. All the requests sent are being sent at once not 3 at a time.
The expected behavior is first 3 sdhud go and then onc ethey complete next 3 similary next 3. But i dont see that behavior. Please let me know if i am doing any worng
below is my work manager configuration
Service Type Any XML Service
Transport Configuration
Protocol http
Load Balancing Algorithm round-robin
Endpoint URI <Specified the end point URI>
Retry Count 0
Retry Iteration Interval 0
Retry Application Errors Yes
HTTP Transport Configuration
Read Timeout 0
Connection Timeout 0
HTTP Request Method POST
Authentication None
Proxy Server
Follow HTTP redirects Disabled
Use Chunked Streaming Mode Enabled
Dispatch Policy WorkManagerTest
Message Handling Configuration
XOP/MTOM Support Disabled
Page Attachments to Disk No
Result Caching Not Supported
Any suggestions on this?
Edited by: 791951 on Mar 17, 2011 7:51 AM

If you need to throttle the Business service, then you should configure the throttling parameters in the Business Service -> Operational Settings tab
Choose your Business Service in the OSB Console -> Operational Settings
Throttling -Check this box to enable the throttling. Maximum Concurrency to 3, and Throttling Queue to x number of messages you wish to hold in the throttling queue

OSB business service transforming a date column 1936 to 2036 ( 1950)

Hello, I'v a database view with a normal date column "geburtsdatum".
Data Dictionary:
GEBURTSDATUM DATE
Now with JDeveloper I create a db-adapter. This works fine.
On OSB I do generate a business service on the just created jca file. Also this works fine.
XSD for db adapter:
<xs:element name="geburtsdatum" type="xs:dateTime" minOccurs="0" nillable="true"/>
I can test this business service successfully, everything is fine, but not the date interpretation when birtdate <1950
Sample geburtsdatum (birtdate): 29-JUL-1934
DATABASE: 29.07.1934
OSB Business Service: 29.07.2034
Why or where happends this date conversion?
This is very strange, anyone had the same problem?
Any help would be appreciated.
Thanks
Best regards,
Reto

After all I found the solution. Again the problem has been caused on DB side.
I'm using a view. On this view I had a DATE column with a decode. I think I did a clean TO_DATE casting, but it seems as the OSB DB Adapter did not interpret this correctly.
(on database side with SQL I did not have any problems here)
My solution was:
Using a date returning function (which does my decoding) in my view :
CREATE VIEW xyz AS
SELECT ...
, myPackage.removeMaxDate(n.geburtsdatum) as geburtsdatum
FROM ...
Regards,
Reto

JSSE causes OSB business services to receive Socket Closed

Using WL 10.3.3 & OSB 11gR1 on jrockit 1.6.0_45 Redhat:
After enabling the "Use JSSE SSL" option in the managed servers's SSL tab ( because web service clients want to use SHA256 certificates ), OSB business services ( outbound to service providers ) fail with
Exception - Body: <s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<soap-env:Fault xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>BEA-380000</faultcode>
<faultstring>General runtime error: socket closed</faultstring>
After a lot of debugging, I've found that the Connection Timeout option within the OSB HTTP transport is involved.
OSB business services which use https AND have a non-zero value for HTTP transport's Connection timeout cause the Socket Closed error.
Business services which do not use HTTPS or do not have a Connection Timeout do not receive the error.
While setting the Connection Timeout to 0 allows the transaction to succeed, that leaves the OSB server vulnerable when the service provider host is not available.
So I've reset the Connection Timeout values to 0, and added this JVM parameter to each OSB managed server
-Dweblogic.http.client.defaultConnectTimeout=5000

There are few BUGs reported for similar issues.
OSB Server Showing "java.io.IOException: SSLEngine is closed" When Attempting to Connect to an External Web Service Using Two-Way SSL (Doc ID 1465618.1)

OSB business service and NTLM authentication

Hi,
Is there a solution to use OSB business service with http transport and this bs authenticates itself with NTLM
thanks Edwin

Hi Manoj,
We want to connect our production esb to the ERP ( IFS) system and we want to do this with the OSB. The ERP system has a lot http services and they are all running on jboss. On this app server they have enabled ntlm so users can their account to fill in there project hours /administration.
I got this working with a authenticator in a jdeveloper 11g web service proxy client. ( http://biemond.blogspot.com/2009/04/jax-ws-web-service-proxy-client-and.html )
thanks Edwin

Using UDDI key in OSB business service

Hi All,
I want to know how to invoke a service published in Oracle service registry through dynamic lookup in OSB. I tried importing service published in OSR as a OSB business service through sb console. In that the business created had the actual service end point reference rather than the UDDI service key. Hence the changes done to the service endpoint in OSR wont get automatically propagated to the osb business service as there is no actual dynamic look up.

You will need to setup the Target system's server certificate as trusted in Weblogic's keystore or the Root CA certificate which certified target system's server certificate as trusted CA in weblogic.
Check this thread for more details:
Callling an external service through HTTPS

How to Define MQ message expire time in OSB Business service.

Hi,
Please let me know the option in OSB business service to set the expiration time for MQ messages. Is it possible?
Thanks,
karthik.

http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/mqtransport/transport.html
transport header "Expiry"
i hope it works :o)

Is it possible to call a Web Application from OSB Business Service

Hi,
Is it possible to call a Web Application that has URL - http://host:port/parse.php using a business service in OSB?
What I have seen is it is able to call the service but the data we are sending that is the string in the form of the URL encoded data is not going there. Any help would be appreciated.
Regards,
Anuj

What I have seen is it is able to call the service but the data we are sending that is the string in the form of the URL encoded data is not going there. Any help would be appreciated.How did you configure your BS. My guess is some thing to do with what your BS is configured and what the Back-end is expecting? HTTP Get Vs HTTP Post
Manoj

OSB - Business Service Import Problem

Hi,
When I import my OSB project (from an Oracle Service Bus Configuration .jar) for the first time, it imports my business service perfectly. However, in the second half when the project already exists on the workspace, new tags are added to the xml even though I have not made any changes in the business service.
Thats my problem:
First Import:
<ser:coreEntry isProxy="false" isEnabled="true">
After Second Import:
<ser:coreEntry isProxy="false" isEnabled="true" isTracingEnabled="false">
and a few other tags are added to the file:
<ser:throttling enabled="false">
<ser:capacity>0</ser:capacity>
<ser:maxQueueLength>0</ser:maxQueueLength>
<ser:timeToLive>0</ser:timeToLive>
</ser:throttling>
<tran:delay-interval-configuration isEnabled="false">
<tran:delay-interval>0</tran:delay-interval>
</tran:delay-interval-configuration>
Any help on how to import the project without these new tags in my business service will be very welcome.
Regards,
Ricardo Azevedo

you can influence the amount of info actually imported choosing to override operational settings, environment setting etc (I can't remember by heart and I am too lazy to start my server now and verify)
Anyway unless this impacts your operations I would not be too worried that some defaults are explicitly stated in the xml. Surely if you import in Production a BS with "message tracing" on, this can affect seriously your performance.

OSB business service on jdev 11g generated db adapter

Is it still possible to generate the db-adapter in jdev and import the resources in osb and create a business service with jca transport based on this wsdl?
the documentation is only describing how to it should work based on a 10.1.3 generated db adapter.
In the 11g the resources of the db-adapter are different (external jca property file etc).
So..whats the way to go for this when using the 11g stack ?

So..whats the way to go for this when using the 11g stack ?Current version of OSB (OSB 10.3.1) does not support 11g adapter stack. The next release of OSB will support 11g Adapters.
Manoj

How to get specific OSB business service HTTP endpoint failover?

I am trying to get the following behavior in an HTTP Business Service in OSB, and I'm not finding the answer (if it exists) in the docs.
I have two backend endpoints, "production" and "backup." I want all request to go to the "production" endpoint unless it becomes unavailable. At which time all requests should go to the backup endpoint - without manual intervention. Automatic failback would be nice but not absolutely necessary. This is what the service provider is recommending for their operational concerns.
Is there some way to accomplish this?
The backup is available at most times, so we can't use round-robin load balancing to get this behavior.
Is this what having a load balancing algorithm of "none" accomplishes? The docs state the order in this case is significant, but not why?
Random-weighted does not work, as it does not allow a zero weight, which means some requests (even if small in proportion) may go to that backup even if the primary is available.

I'm now seeing this in real operation, and I'm seeing something that puzzles me based on the discussion above, and also a behavior I'd like to change if I can.....
First, the puzzlement - of about 6700 invocations over the space of a few hours, I see in the console 9 errors in the primary as configured above, and 9 messages handled successfully by the secondary. So, since the messages are coming on a fairly regular basis (a few per minute, spread over 3 OSB instances), and I have a 10 min retry interval, I would have expected to see a lot more messages handled by the secondary endpoint while OSB instance was waiting 10 min to retry the primary. What's going on here? Does this class of "failure" not take an endpoint "offline?"
Second, behavior I want to change: the errors are apparently intermittent SSL HANDSHAKE_FAILUREs reported by the backend. Is there anyway to get the primary retried first, since we only want traffic to go to the backup if the primary is really offline?
/Steve Elkind
####<Dec 22, 2009 10:45:14 PM EST> <Warning> <Security> <njxymh0099> <SS_ESB_mgd2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1261539914730> <BEA-090497> <HANDSHAKE_FAILURE alert received from fobar-web02.inex.com - 207.235.231.231. Check both sides of the SSL configuration for mismatches in supported ciphers, supported protocol versions, trusted CAs, and hostname verification settings.>

How to set username/password in OSB Business Service

Hi
I need to call thirt party http service that utilizes Http Basic authentication i.e. username / password. If I call the same service through Oracle SOA I can either
put the username/password inside composite.xml but that way the password is visible. So have set the usrname/password insid the console.
Now want to use OSB to call the sam service. Created business service but where do I add the username/password. Is there a plac inside sbconsole I can set the username password.
Thanks

You must a "Service Account" available in OSB and assosciate it with the Business service you invoke.

OSB Business Service Scripted Automation Testing

Hi,
The dilemma I am facing is to create some sort of automated process of testing of Business Services created in OSB, perhaps via ANT and Phyton, to be used as verification after deployments by deployment team. I am trying to have the scripted process to run certain request payloads from specified location against business services and compare the results with expected responses stored in some directory and report the health of the business services, based on this comparison.
I appreciate any help in advance.

Thank you so much for your response Pierluigi, but one other dilemma I have is not to install any application on any of the domain and achieve this through some sort of perhaps ANT and/or Phyton script, since I am not allowed to install any thing on production servers.
Thanks,
Mani

OSB Business Service Retries for Read Timeout

Hi,
Is it possible to have retries configurable for Read Time out in Business Services in OSB ?
What is the best practice alternative if we need to retry on a read time out with the same request ?

You can configure your business service to retry.On the transport configuration tab of the business service configure the following:-
Retry Count
Retry Iteration Interval
http://docs.oracle.com/cd/E14571_01/doc.1111/e15867/business_services.htm#i1096469

OSB Business service not returning error payload

Hello,
I have some RESTful services in the OSB 10.3. On an HTTP error, the business service reads the error code (for example http error code 500) and it returns it to the proxy service. But the message of the error seems not to be read at all. How can I do that?
Thanks!

I don't get any error message. I'l rephrase:
I work with REST (Any XML service). My BusinessService calls an external RESTful webservice, and this external webservice returns an HTTP packet like this (more or less):
PACKET BEGIN:
HTTP/1.1 500 Internal Server Error
Date: Wed, 29 Sep 2010 13:37:50 GMT
Content-Length: 0
Content-Type: text/xml; charset=UTF-8
<?xml version="1.0" encoding="UTF-8"?><Error><Message>There was a blablabla error on our side. Sorry.</Message></Error>
PACKET END.
I am able to propagate such an HTTP error code by using an insert in the ErrorHandler, but I am not able to propagate the XML message that is being returned to me. It is not found anywhere, I checked all he variables $body, $fault, etc.
Does the OSB BusinessService read this payload at all or should I implement a custom callout procedure because of this?
Edited by: user4507278 on Sep 30, 2010 5:35 AM

10Gr3 OSB business service is unable enqueue to 11Gweblogic server

Similar Messages

Maybe you are looking for