10gRAC VIP get down frequently on VM....

Hi All,
I have setup oracle10gR2 RAC (10.2.0.4.0) EE on VM. During the installation there is no issues , infact going very smoothly.
When I handover this envrionment to my QA/QA department there is always complaint about VIP. VIP frequently gets down on both the nodes. I have no option except reboot both the RAC VMs. CAn you please suggest me what could be the reason to get VIP frequently down on VM ? Is this known issue on VM?
Please suggest me.
Thanks...

Hi,
You need to have minimum 3 voting disk to determine the survival in case on node eviction. So add 2 more voting disk.
Always ODD number of Voting disks.
http://docs.oracle.com/cd/B19306_01/rac.102/b28759/adminoc.htm#TDPRC055
And ownership should be oracle:dba with 640 permission.
Anand

Similar Messages

BPM Server is getting down frequently in dev environment.

Hi,
Please help me to resolve the problem that BPM Server getting down frequently in development environment. Daily 2-3 times it gets down. Generally it happens when we do any application deployment.
Thanks in advance.

What are your Memory settings? Do You Know the BPM Performance Tuning Guide?http://www.oracle.com/technetwork/middleware/bpm/learnmore/bpm11gperftuning-1912340.pdf
Danilo

Notification mailer getting down frequently

Hi All,
Notification mailer getting down frequently.
We have checked the log file and got the below errors:
1) Maximum number of errors (null) have been reached for this Service Component -> oracle.apps.fnd.cp.gsc.ProcessorException: Unable to connect to mail store)
2) Maximum number of errors (10) have been reached for this Service Component -> oracle.apps.fnd.cp.gsc.ProcessorException: Unable to connect to mail store
Please help us to resolve the issue.
Thanks
Subhasis
Edited by: user11977214 on Jul 13, 2010 12:48 AM
This Automatic Service Component has been restarted the maximum of 10 times after stopping with error. Thus, it has been system deactivated -> oracle.apps.fnd.cp.gsc.ProcessorException: Problem getting HTML content. -> oracle.apps.fnd.wf.mailer.FormatterException: Problem getting the HTML content -> oracle.apps.fnd.wf.mailer.NotificationFormatter$FormatterSAXException: Problem obtaining the HTML content -> oracle.apps.fnd.wf.common.HTTPClientException: Unable to invoke method HTTPClient.HTTPConnection.Get caused by: java.net.UnknownHostException: ccuine03.eveready.co.in at oracle.apps.fnd.wf.mailer.NotificationFormatter.handleResEndTag(NotificationFormatter.java:3151) at oracle.apps.fnd.wf.mailer.NotificationFormatter.endElement(NotificationFormatter.java:562) at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196) at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212) at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301) at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268) at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:253) at oracle.apps.fnd.wf.mailer.NotificationFormatter.getFormattedMessages(NotificationFormatter.java:338) at oracle.apps.fnd.wf.mailer.SMTPMessageHandler.prepareMessages(SMTPMessageHandler.java:96) at oracle.apps.fnd.wf.mailer.SMTPOutboundProcessor.read(SMTPOutboundProcessor.java:707) at oracle.apps.fnd.cp.gsc.SvcComponentProcessor.process(SvcComponentProcessor.java:596) at oracle.apps.fnd.cp.gsc.Processor.run(Processor.java:283) at java.lang.Thread.run(Thread.java:534) Caused by: oracle.apps.fnd.wf.mailer.NotificationFormatter$FormatterSAXException: Problem obtaining the HTML content -> oracle.apps.fnd.wf.common.HTTPClientException: Unable to invoke method HTTPClient.HTTPConnection.Get caused by: java.net.UnknownHostException: ccuine03.eveready.co.in
Is the error

Please go through the Note: 469822.1 - Oracle Workflow Release 12 Diagnostics and run the tests.
It may help is troubleshooting the issue.
Regards
http://www.oracleracexpert.com
ORA-07445 Error and reasons for it.
http://www.oracleracexpert.com/2009/08/ora-07445-error.html
See the ORA-27102 Error and Soltuion on Solaris
http://www.oracleracexpert.com/2009/08/ora-27102-out-of-memory-on-solaris.html

UME IM getting down frequently.

Hi,
In our development portal UME IM is frequently getting down and we don't understand why it happens. We redeploy the component again into the portal and whenever the portal restarting , again it goes down.
it shows the following error
" A required service for the identity management user interface is not available. Contact your system administrator "
By the if in case if we want restart he UME IM in Portal, What is the Application Console name of UME IM ?
please help
Regards,
Jyothi

Hi,
My system details are below
Java(TM) 2 Runtime Environment, Standard Edition : 1.4.2_13-b06
OS : SunOS (5.10)
Server : 64 Bit
I find there is not error in trace file. Where can we find "JHVM_LoadJavaVM" and other details?
Regards,
Jyothi

Manage server are getting down frequently

Hi All,
i am using weblogic 10.3 version i have one problem , weblogic server is have two managed servers ,problem here is my one of manage server is always getting down, when i check in Unix memory utilization the usage is 90% displaying. is the problem is related to memory utilization are some thing else
Exception its displaying
java.lang.OutOfMemoryError: GC overhead limit exceeded
Please help me on these
Thanks in Advance
Sreenivasulu

I am not getting exactly same messsage. Here is my message, just outcome look sames, managedsever got disconnected from AdminServer.
####<Feb 3, 2011 10:31:16 AM CST> <Info> <Health> <bldxbiap01> <AdminServer> <weblogic.GCMonitor> <<anonymous>> <> <> <1296750676097> <BEA-3100
02> <43% of the total memory in the server is free>
####<Feb 3, 2011 12:33:16 PM CST> <Info> <Health> <bldxbiap01> <AdminServer> <weblogic.GCMonitor> <<anonymous>> <> <> <1296757996590> <BEA-3100
02> <32% of the total memory in the server is free>
####<Feb 3, 2011 1:13:42 PM CST> <Info> <Server> <bldxbiap01> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (
self-tuning)'> <<WLS Kernel>> <> <> <1296760422800> <BEA-002634> <The server "BIServer01" disconnected from this server.>
####<Feb 3, 2011 1:13:42 PM CST> <Info> <JMX> <bldxbiap01> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self
-tuning)'> <<WLS Kernel>> <> <> <1296760422801> <BEA-149507> <JMX Connectivity has been discontinued with the managed server BIServer01.>
####<Feb 3, 2011 2:56:17 PM CST> <Info> <Health> <bldxbiap01> <AdminServer> <weblogic.GCMonitor> <<anonymous>> <> <> <1296766577142> <BEA-31000
2> <21% of the total memory in the server is free>

VIPs going down frequently in 11gR1 RAC

My 11gr1 RAC virtual IPs are frequently going down, can you please help me how to dig why it is going down and how to make them always up.
Thanks,
Mahi

Triplicate post ... please ignore this thread and do not respond to it.
To the OP: The easiest way to get no one here to help you is to be abusive. We do not appreciate you posting the same question more than once to multiple forums. Please remove the duplicates and do not do it again.
Thank you.

SOA Server getting down frequently

Hi All,
Following are the versions:
WebLogic Version : 10.3.3.0
SOA : 11.1.1.3.0
We are facing frequent server breakdown issues.
But we could not find the root cause for it.
Does anyone faced this scenario ?
What could be the possible reasons regarding this server down issue ??
In the error logs too we could not find any valuable information .
Please add your suggestions.
Regards
Sridhar

Is this when u run certain process or its happening commonly when no process is running.
when its failing doea it give any datasource errors.
Which server shuts down admin or soa server, if its shuts down is it throwing overloaded first and then shut down.

Listener getting down frequentky

Hi All
We are in RAC with two nodes in vesrion Oracle Database 10g Release 10.1.0.5.0
Os Details -Windows 2003 32-bit OS (4 Gb ram each)
My SGA and PGA are 1536M and 650M
Users connecting to each instances are more than 200...to 250 per instance
We get this tns error in the listerner log files of the second instance and first instancein last few day's
Now we checked the number of users connected to server while we get this TNS error are 170 and 240 in the first and second instancerespectively
Listener get's down automatically with this below error...
16-SEP-2009 11:52:06 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=orcl)(CID=(PROGRAM=D:\orant\BIN\RWRBE60.exe)(HOST=XXXXXXXXX-CTX02)(USER=ajmancashier))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.35)(PORT=4391)) * establish * orcl * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 233: Unknown error
16-SEP-2009 11:52:09 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=orcl)(CID=(PROGRAM=D:\orant\BIN\RWRBE60.exe)(HOST=XXXXXXXXX-CTX02)(USER=kishor.kumar))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.35)(PORT=4395)) * establish * orcl * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 233: Unknown error
The errors in the alert log files are given below:
Wed Sep 16 11:05:23 2009
ARC1: Evaluating archive thread 2 sequence 11010
Committing creation of archivelog 'D:\ARCHIVE\ARC11010_0650724155.002'
Wed Sep 16 11:11:35 2009
skgpspawn failed:category = 27143, depinfo = 997, op = spcdr:9261:4200, loc = skgpspawn
Wed Sep 16 11:11:35 2009
kkjcre1p: unable to spawn jobq slave process
Wed Sep 16 11:11:35 2009
Errors in file d:\oracle\product\10.1.0\admin\orcl\bdump\orcl2_cjq0_2440.trc:
Wed Sep 16 11:19:35 2009
skgpspawn failed:category = 27143, depinfo = 997, op = spcdr:9261:4200, loc = skgpspawn
Wed Sep 16 11:19:35 2009
kkjcre1p: unable to spawn jobq slave process
Wed Sep 16 11:19:35 2009
Errors in file d:\oracle\product\10.1.0\admin\orcl\bdump\orcl2_cjq0_2440.trc:
Wed Sep 16 11:47:35 2009
skgpspawn failed:category = 27143, depinfo = 997, op = spcdr:9261:4200, loc = skgpspawn
Wed Sep 16 11:47:35 2009
kkjcre1p: unable to spawn jobq slave process
Wed Sep 16 11:47:35 2009
Errors in file d:\oracle\product\10.1.0\admin\orcl\bdump\orcl2_cjq0_2440.trc:
I suspect this listener is getting down frequently due to out of memory in the server, but i don't see any error's in alert log file stating out of memory.
Pls share your views on this scenario.
Thanks
Regards
Hari
Edited by: hariharan.thyagarajan on Sep 16, 2009 2:42 PM

hariharan.thyagarajan wrote:
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 233: Unknown errorNot too familiar with how Oracle's processing architecture works on Windows - never used Oracle really on Windows. I suspect that the Listener will call something like +[CreateThread()|http://msdn.microsoft.com/en-us/library/ms682453(VS.85).aspx]+ (or CreateRemoteThread() ) to start a dedicated server process.
This calls fails. The reason for the underlaying (root cause) Win32 error you're seeing.
This can fail for a number of reasons.. the most likeliest being insufficient resources (memory specifically) being available for that thread to be created.
The MSDN article I've linked to above says:
>
The number of threads a process can create is limited by the available virtual memory. By default, every thread has one megabyte of stack space. Therefore, you can create at most 2,048 threads. If you reduce the default stack size, you can create more threads. However, your application will have better performance if you create one thread per processor and build queues of requests for which the application maintains the context information. A thread would process all requests in a queue before processing requests in the next queue
>
Of course, this assumption is that the CreateThread() call is used. Oracle could be using fibres or some other Win32 call.. but in principle, that call is failing and is why you are seeing this error.
Oracle supports shared server process architecture on Win32 too. This should (I suspect) reduce the memory footprint of server threads. You may want to investigate this option.

My probook 4420s lap is getting shut down frequently

My probook 4420s lap is getting shut down frequently for the last two weeks. Whenever I start d lap, it gets opening normally and after few minutes, it gets power off without showing any error messages. What to do..? Once I tried d hard disk checking before the booting, but it was shown that "heard could not find or missing".

Hi,
Thank you for posting in the HP Support Forum.
In addition to what @visruth has written, you can also try to download Speccy - http://www.piriform.com/speccy
This is free software for system information and it can show/measure the temperature of some of the computer components.
In my opinion your problem looks like overheating issue. When the computer's fan is not working, it overheats (especially if the CPU/HDD are overloaded with some tasks) and stops working (powers down unexpectedly with no messages) to prevent damage. If this is the case, it would be good to monitor the temperature.
If this is the case, authorized HP Support Center should be able to help you fix this. If you are not sure where such is located, you can contact the nearest HP contact -> http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Best wishes,
IT_WinSec
Hewlett-Packard employee | HP Enterprise Services
Although I work for HP, I express my personal opinion.
Visit www.hp.com/makeitmatter
--Say "Thanks" by clicking the Kudos Thumb Up in the post that you find useful.
--Please mark the post that solves your problem as "Accepted Solution"

After updating to iOS 8 the iPad Air is getting crashed frequently including safari

After updating to iOS 8 the iPad Air is getting crashed frequently including safari.

Have you tried to reset it? Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and see if that helps.
You may need to restore your iPad. That's where you back it up, then restore it to factory defaults, then put your backup back on so you don't lose any data. Sometimes a fresh start clears out any glitches and can help.

Tomcat is getting down abruptly

Hi All,
I am using jdk1.5 and Tomcat 5.0.2 on Linux.
Tomcat is getting down abruptly frequently. Need to get it up manually every time.
Is there any known solution to fix this issue.
Thanks
Krrish

What are your Memory settings? Do You Know the BPM Performance Tuning Guide?http://www.oracle.com/technetwork/middleware/bpm/learnmore/bpm11gperftuning-1912340.pdf
Danilo

The Managed servers are going down frequently due to leasing renewal.

We have 3 SOA Managed Servers in our Production Environment running each of them on 3 different Machines.
The servers are going down frequently due to leasing renewal issue.
Please see the errors below. SOA_MS3 was the Cluster Leader.
From SOA_MS1 logs we see -
<Jun 15, 2011 12:11:24 AM MDT> <Warning> <Cluster> <WL-000147> <Server "SOA_MS1" failed to renew lease in the leasing basis hosted by SOA_MS3.>
<Jun 15, 2011 12:11:24 AM MDT> <Error> <Cluster> <WL-000150> <Server failed to get a connection to the leasing basis hosted by SOA_MS3 in the past 30 seconds for lease renewal. Server will shut itself down.>
<Jun 15, 2011 12:11:24 AM MDT> <Critical> <Health> <WL-310006> <Critical Subsystem ServerMigration has failed. Setting server state to FAILED.
Reason: ServerSOA_MS1 failed to renew lease in the leasing basis hosted by SOA_MS3>
<Jun 15, 2011 12:11:24 AM MDT> <Critical> <WebLogicServer> <WL-000385> <Server health failed. Reason: health of critical service 'ServerMigration' failed>
<Jun 15, 2011 12:11:24 AM MDT> <Notice> <WebLogicServer> <WL-000365> <Server state changed to FAILED>
<Jun 15, 2011 12:11:24 AM MDT> <Error> <com.bea.weblogic.kernel> <BEA-000000> <cannot load libary 'stackdump': java.lang.UnsatisfiedLinkError: no stackdump in java.library.path
>
<Jun 15, 2011 12:11:24 AM MDT> <Error> <WebLogicServer> <WL-000383> <A critical service failed. The server will shut itself down>
<Jun 15, 2011 12:11:24 AM MDT> <Notice> <WebLogicServer> <WL-000365> <Server state changed to FORCE_SHUTTING_DOWN>
<Jun 15, 2011 12:11:24 AM MDT> <Notice> <Cluster> <WL-000163> <Stopping "async" replication service>
From SOA_MS2 logs we see -
15, 2011 12:11:16 AM MDT> <Warning> <Cluster> <WL-000147> <Server "SOA_MS2" failed to renew lease in the leasing basis hosted by SOA_MS3.>
<Jun 15, 2011 12:11:16 AM MDT> <Error> <Cluster> <WL-000150> <Server failed to get a connection to the leasing basis hosted by SOA_MS3 in the past 30 seconds for lease renewal. Server will shut itself down.>
<Jun 15, 2011 12:11:16 AM MDT> <Critical> <Health> <WL-310006> <Critical Subsystem ServerMigration has failed. Setting server state to FAILED.
Reason: ServerSOA_MS2 failed to renew lease in the leasing basis hosted by SOA_MS3>
<Jun 15, 2011 12:11:16 AM MDT> <Critical> <WebLogicServer> <WL-000385> <Server health failed. Reason: health of critical service 'ServerMigration' failed>
<Jun 15, 2011 12:11:16 AM MDT> <Notice> <WebLogicServer> <WL-000365> <Server state changed to FAILED>
<Jun 15, 2011 12:11:16 AM MDT> <Error> <com.bea.weblogic.kernel> <BEA-000000> <cannot load libary 'stackdump': java.lang.UnsatisfiedLinkError: no stackdump in java.library.path
>
<Jun 15, 2011 12:11:16 AM MDT> <Error> <WebLogicServer> <WL-000383> <A critical service failed. The server will shut itself down>
<Jun 15, 2011 12:11:16 AM MDT> <Notice> <WebLogicServer> <WL-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Also, In SOA_MS3 logs we see the followi error -
####<Jun 15, 2011 11:43:18 PM MDT> <Error> <Cluster> <soaprdi3> <SOA_MS3> <[ACTIVE] ExecuteThread: '15' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1308202998662> <WL-000168> <Failed to restart/migrate server "SOA_MS3" because of Failed to start the migratable server on one of the candidate machines
Failed to start the migratable server on one of the candidate machines
at weblogic.cluster.singleton.MigratableServerState.serverUnresponsive(MigratableServerState.java:95)
at weblogic.cluster.singleton.MigratableServersMonitorImpl.timerExpired(MigratableServersMonitorImpl.java:164)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Thanks,

Its been many days support working on this, they do not have any clue. we escalated, not much of clue they have yet.
So, wanted put it across industry experts on SOA.
Any idea on what causes this Leasing renewal issue and the potential resolution?
Thanks

My iPhone 4 gets hang frequently.....

my iPhone 4 gets hang frequently. for example i am using an application and after couple of secs, i would not be able to exit from this application by pressing home button even after multiple times. some times in lock mode when i press home button to unlock it doesn't show anything where as pressing lock key i am able to unlock. now after unlocking them moment i would open any of the application, it would not allow me to close this app and open any other app although i can operate exisitng opened app but can not close this.
I have already resetted my iPhone with iCloud back but proble still persist.

Hardware error. Remain calm. Take it back.
I had the same thing with my iPod Touch or my iPad (I don't remember which). One day I fired it up and it randomly opened apps and typed stuff. I tried a restart with no success. So turned it off, sat down, logged on to apple.com, set up a genius appointment for that night or the next, took in, showed it to the guy, he said, "hmm, let me get you aother one. Do you have anything saved on this that you need?", got my new one, went home, had some green tea, went to bed.

After installing Mavericks,it get shutdown frequently

Hi ,
Once i install Mavericks in my MacMini,it get shutdown frequently.

Hello,
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
Also...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed. Or an errant process eating up RAM.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

SSRS Reporting manages goes down frequently. ERROR: The underlying connection was closed: An unexpected error occurred on a send.

We have been experiencing issues with SSRS over the past 5 weeks, the service goes down frequently. And it comes up only on reboot of the server.
We had also disabled the On Access scan in Mcafee.
The service is in use for about two years, and the below error started occuring over the last few days. Please advise on this.
ui!ReportManager_0-2!24e8!08/14/2014-18:13:45:: e ERROR: The underlying connection was closed: An unexpected error occurred on a send.
ui!ReportManager_0-2!24e8!08/14/2014-18:13:45:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: The underlying connection was closed: An unexpected error occurred on a send. ---> System.IO.IOException: Unable to write data to the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException:
An existing connection was forcibly closed by the remote host
   at System.Net.Sockets.Socket.Send(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags)
   at System.Net.Sockets.NetworkStream.Write(Byte[] buffer, Int32 offset, Int32 size)
   --- End of inner exception stack trace ---
   at System.Net.Sockets.NetworkStream.Write(Byte[] buffer, Int32 offset, Int32 size)
   at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size)
   at System.Net.ConnectStream.WriteHeaders(Boolean async)
   --- End of inner exception stack trace ---
   at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
   at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
   at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
   at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
   at Microsoft.ReportingServices.UI.Global.SecureAllAPI()
   at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
   at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Page.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
ui!ReportManager_0-2!24e8!08/14/2014-18:13:46:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
   at System.Threading.Thread.AbortInternal()
   at System.Threading.Thread.Abort(Object stateInfo)
   at System.Web.HttpResponse.End()
   at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
   at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at    at System.Threading.Thread.AbortInternal()
   at System.Threading.Thread.Abort(Object stateInfo)
   at System.Web.HttpResponse.End()
   at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
   at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
library!ReportServer_0-1!1c90!08/14/2014-18:13:51:: Call to ListParentsAction(/Data Sources).
library!ReportServer_0-1!1c90!08/14/2014-18:13:51:: Call to ListParentsAction(/Data Sources).
library!ReportServer_0-1!1c90!08/14/2014-18:13:51:: Call to ListChildrenAction(/Data Sources, False).
webserver!ReportServer_0-1!1c90!08/14/2014-18:13:51:: i INFO: Processed folder '/Data Sources'
library!ReportServer_0-1!68c!08/14/2014-18:13:56:: Call to GetItemTypeAction(/).
library!ReportServer_0-1!68c!08/14/2014-18:13:56:: Call to ListParentsAction(/).
library!ReportServer_0-1!68c!08/14/2014-18:13:56:: Call to ListChildrenAction(/, False).
webserver!ReportServer_0-1!68c!08/14/2014-18:13:56:: i INFO: Processed folder '/'

Hi SThiyag,
Based on your error message, it may be related to the “SecureConnectionLevel” in the RSReportServer.config file. Please go to C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer, use Notepad to open the RSReportServer.config,
modify <Add Key="SecureConnectionLevel" Value="0"/>, change the value into "1" or "2".
(Note: Please backup the file before modify it.)
Acceptable values are:
3 Most secure—Use SSL for absolutely everything.
2 Secure—Use SSL for rendering and methods that pass credentials but don't insist on it for all SOAP calls.
1 Basic Security—Accepts http but rejects any calls that might be involved in the passing of credentials.
0 Least Secure—Don't use SSL at all
Here is a blog for error message "The underlying connection was closed...", please refer to the link below:
http://blogs.msdn.com/b/engelsr/archive/2005/11/29/the-underlying-connection-was-closed.aspx
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

10gRAC VIP get down frequently on VM....

Similar Messages

Maybe you are looking for