11.0.10 Update Issue - Problem saving documents - getting message "This document could not be saved. There was a problem reading this document (21)." The PDF documents are being created by Esker VSIFax and the problem is only occuring with updated vers
Our IBM Unix system uses a program called VSIFax (Esker) to create PDF documents such as invoices. Users that have updated to Acrobat version 11.0.10 can open the PDF but then when trying to save the document the get a message "This document could not be saved. There was a problem reading this document (21)." The problem is only occuring with updated version 11.0.10 (11.0.9 works fine).
More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages AdbeRdrSecUpd11008.msp
Similar Messages
-
When I try to share a project to theater I get the message Your Theater could not be opened.There was a problem reading your movies from iCloud and the project does not share. Can anyone help?
Set up iMovie Theater and iCloud
In order to take full advantage of the capabilities of iMovie Theater, you must be signed in to iCloud. If you are signed in to iCloud, movies and trailers shared to iMovie Theater are automatically uploaded to iCloud. You can also turn off automatic uploading, and upload just the movies and trailers you want, or delete individual movies and trailers from iCloud. For more information about the Theater, see iMovie Theater overview.
If you sign out of your iCloud account on your Mac, all iCloud movies disappear from the Theater, but they are not deleted; the movies reappear when you sign in again. If you ever run out of space in iCloud, an alert icon appears in the top-right corner of your movie, indicating that you can’t upload new movies. For more information, click the icon. After you upgrade your iCloud storage or clear space, your movies automatically appear in iCloud again.
Hide
Set up automatic iCloud uploading
Choose Apple menu > System Preferences, and click iCloud.
Make sure you’re signed in, and then select the Documents & Data checkbox.
Click the Options button next to Documents & Data.
Make sure the iMovie checkbox is selected.
In iMovie, choose iMovie > Preferences.
Select the “Automatically upload content to iCloud” checkbox.
To turn off automatic uploading, deselect the checkbox. -
Could not sign in, there was a problem with connec...
I am unable to login in desktop nokia suite 3.8.48 version.
i am using Windows XP OS, Nokia Suite Version 3.8.48.
When i try to login to the Nokia Suite , it throws error message saying unable to connect to server.
Error Message throws as
"could not sign in, there was a problem with connecting to your nokia account."
Similarly on trying to connect to create new account via Nokia suite , it says as "Could not connect to server.
But i am able to login to my nokia account using the webversion with my user name.
Nokia user name : bharathbjpss
Attachments:
Nokia Error.JPG 22 KBDoes this help?
About your Lumia phone: You are aware, you cannot use the Nokia Suite with your Lumia phone. Furthermore, that issue has another cause for sure. Therefore, please, provide the error message/code presented in your Lumia word for word. Is this related? -
"the document.....could not be saved"
I just started receiving this error message on one song. "the document.....could not be saved"
If I closed down everything and restarted i could then save the project. Now it won't even do that and it has spread to another song/project, with even more messages (Minor Problem in Data, Score Style Fixed, Error-Csong::CreateSeq-Illegal Block Size) the prject then opens up but there are no regions or tracks in the arrange window. These projects are very basic audio files (WAV) and few plug-ins, basic rock and roll songs.
These projects are being run at 96. I never received this info on projects at 44.1 or 48. All of your suggestions would be appreciated. Thanks, jdfWhenever I had that error message (in Logic 32bit mode) it was a virtual memory issue. I seemed that memory was so tied that moment that it didn't have the necessary bits to perform the save process. When I tried to free up memory by closing all but one window or unload some plugins the save process went through.
Just make sure to write down the plugins that you unloaded so you can reload them when open up the project.
Quick Tip:
Always have the Activity Monitor open and keep an eye on the available memory space. If you do a lot of loading and unloading of sounds, Logic's memory and the available memory on your machine in general gets very fragmented because OSX keeps stuff in RAM just in case (Inactive Memory). Restart the machine once in a while to flush out all those leftovers. -
TS3274 MINE SAY'S "COULD NOT SIGN IN - THERE WAS A PROBLEM CONNECTING TO THE SERVER".
MINE SAY'S "COULD NOT SIGN IN - THERE WAS A PROBLEM CONNECTING TO THE SERVER".
You may think you are connected to the internet, but maybe not. Click on Safari and see if it connects.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
TS4036 Could not sign in there was a problem connecting to the server
Could not sign in there was a problem connecting to the server
Welcome to the Apple Community Ellie.
That doesn't sound right. It sounds as though you are trying to create a new ID, which of course you shouldn't be doing if you are trying to restore from a previous back up. -
New problem again, This operation could not completed as there's no video
I don' t understand what is the problem, I work with FCP 6.0 and Quicktime 7.4.1 very well until today, when I tray to capture from DV devices ( note that the capture window says PREVIEW DISABLED , but I can remote the camera, mark tc in , out FFW REW etc, message VTR IS OK) The capture is aborted with this message THIS OPERATION COULD NOT COMPLETED AS THERE IS NO VIDEO, when I tray to capture from JVC PRO HD there is no problem. ANY IDEAS????? I'm not work whit another FCP version because with other version there is a problem with JVC PRO HD DEVICES . I note that I'm not the only one with this problem, another curiosity is that at this mooring I capture a tape without a problem but with the second tape start the problem when I thread the tape. Who is possible that the problems are like a miscellanies problem. In the system profile the Camera and vcr dv appears connected to the mac. The fire wire is ok.
<Edited by Moderator>Hi of course I use the correct easy setup,Ii tray with different cameras, vcr's, vtr's, dv , Dvcam, I tray with different fire wire etc. Note that "IMOVIE" capture material without problem, same tape, this problem is affected to other people, included me , but for week i no have this problem with FCP 6.0 and Quicktime 7.4.1 this problem starting to day in the middle of the batch capture, the first tape was captured , but in the second tape start the message, WAITING FOR TIME CODE, THE DEVICE MUST SET IN VTR MODE, of course that this two things are ok, and appears then message "This operation could not completed as there's no video" Note that quicktime pro is unable to capture material from DV device too. Imovie work OK with the same camera and vtr and the same tape. The problem is quicktime and FCP.
http://discussions.apple.com/message.jspa?messageID=7418664#7418664
http://discussions.apple.com/message.jspa?messageID=7390713#7390713
http://discussions.apple.com/message.jspa?messageID=7365555#7365555
http://discussions.apple.com/message.jspa?messageID=7344941#7344941
http://discussions.apple.com/message.jspa?messageID=7335764#7335764
http://discussions.apple.com/message.jspa?messageID=7335763#7335763 -
After upgrading to Maverick, when I double click on the attachment I get this message "...could not be saved, because you cannot change the contents of that folder. Change the folder properties and try again, or try saving in a different location." It happens for all types of files.
Any suggestions as how to fix this?
I'm on a Mac OS X 10.9.3 with Thunderbird 24.5.0Thunderbird > preferences (I think on a mac) and under attachments set the folder
-
HT1338 Not able to down load itunes updates, error message: corrupt file could not be saved
Not able to down load itunes updates, error message: corrupt file could not be saved try again another time. All other update are able to download...... but not Itunes.
Note: My internet service is DSL and very slow (military installation with no other option).Not able to down load itunes updates, error message: corrupt file could not be saved try again another time. All other update are able to download...... but not Itunes.
Note: My internet service is DSL and very slow (military installation with no other option). -
Some of my edits of contacts in the iCloud contacts will not save. Instead, I get the message that "Your changes to this contact could not be saved because of a server error". Other, similar, edits are saving and synching to other Apple devices.
Thanks for helpJeffeighmy - I had this same problem last week. I think it is an iCould issue. It resolved itself. Just frustrating. I had reinstalled iCloud Control Panel and it would not let me save contacts or calendars. Then it just happened after a couple of days of trying. My contacts on my iphone are now duplicated, not in Outlook. Then when I delete one on the iphone it deletes it up through icloud and my pc so I loose that contact. Go figure.
Mike -
why do i keep on see the message "your purchase could not be completed contact itunes support to complete this transaction"everytime i want to purchase?
Click here and request assistance.
(78282) -
"this webpage could not be saved"? how can i do that
Hi every body. When I save any webpage at java.sun.com, a message box shows "this webpage could not be saved".
How can I do that? May be it's javascript code?And this is related to cyptography?
-
Hi all , i tried to install os x mountain lion i could not it said ( There was an error in the App Store. Please try again later. (100) ... now tow weeks
Hello, might be good luck on your part!
Anyway...
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there to Repair the Disk. -
I just bought a 3rd generation ipod touch. It was professionally refurbished. I'm trying to set it up, and everything seems to be working fine, until we get to the wifi. I live on campus and our wifi is username and password protected. I signed in and everything seemed to work fine, and in the top left hand corner I have all the bars for wifi. However, when I go to sign in with an apple ID it says 'Could no sign in: there was a problem connecting to the server'. I've tried turning it on and off again, tried signing on to our wifi again, but it all isn't working. What can I do?
I also encountered the same problem. Try using a different email address or try signing in later.
-
I am trying to backup my ipad to my computer. It goes through the process, but then tells me a backup could not be saved on my computer. I have a previous backup on here, so it worked at one time a few months ago. I've got the latest version of iTunes and even uninstalled and reinstalled iTunes. Why is this happening and how do I fix it?
Did you try what was suggested on that page i.e. disconnecting the iPad from your computer and turning the iPad off (press and hold the sleep/wake button until the red 'slide to power off' appears on screen and slide that) and then back on ?
And if the backup doesn't work after that then try a soft-reset instead of the off and on : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Maybe you are looking for
-
How do i remove the Tips app and the Health app that apple added to my iphone on the last update? Update 8.0.2? I didn't want these added to my phone. I have to remove apps every time there is an update. After the phone is updated I reinstall the app
-
Hi, Somebody knows if exists some parameter that allows the grouping creation of PR with transaction MD01? In my customer, the MD01 creates one PR for each material Thank you!
-
Receive error 21 when trying to install lightroom cc 2015 using creative cloud
On trying to install Lightroom CC 2015 using Creative Cloud I receive error 21. Any ideas what to do??
-
PDF locking when displaying it in iFrame in browser
Hi guys, I have a webpage written in ASP.NET which displays a PDF in the browser using an iFrame. Relevant ASPX code is below: <iframe id="ifrmPDF" src='<%=sFile %>'></iframe> Where the variable sFile is the path to the PDF that I am displaying. But
-
Why is my battery health decreasing so rapidly????
I bought a new one like 3 weeks ago .. it has 10 cycles and the battery health has decreased from 98% to 95% in these last few days .. I usually have it connected to Ac power and discharge it like every 4 days.. thats the 10 cycles .. why would the h