11.1.0.1.0 agent installation failure
I have successfully installed 11g grid control on Linux RHEL 5 x86_64
While installing the agent using oms push on to other Linux RHEL 5 x86_64 machine in installation phase its getting failed. I am not able to figure it out how to resolve the issue.
The errors in log specified are like these
install.err Logfile content
ls: /opt/oracle/product/11gagent//agent11g/cfgtoollogs/oui/: No such file or directory
grep: /opt/oracle/product/11gagent//agent11g/cfgtoollogs/oui//: No such file or directory
grep: /opt/oracle/product/11gagent//agent11g/cfgtoollogs/oui//: No such file or directory
agentInstall.sh030211140140.log
Agent installation on node linuxserver1 fails for default shiphome
********************************
Hi ,
could you please check if the directories
/opt/oracle/product/11gagent//agent11g or /opt/oracle/product/11gagent/
do exist at all?
Have you installed an agent on the node before?
Please check the logfile "OC4J~OC4J_EM~default_island~1" of the OMS
for messages like
'agentpush_Install_NotDefaultShiphome' failed orThe action 'agentpush_Install_CollectLog' failed.
as well (could be found under $OMS_HOME/opmn/logs). If you have found those errors please let me know...
HTH
Similar Messages
-
Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support -
Data Guard Agent, Authentication Failure
I'm working with two Windows 2003 servers, attempting to use one as a standby and one as a primary database use Data Guard. However, I'm having a bit of trouble when trying to get one server to communicate through the Management Agent and Management Service. I've done Management Agent installs on about 20 XP workstations and they've also worked wonderfully with the Oracle Grid Control.
When the agent on my would-be standby database instance starts up I'm receiving the following errors in emagent.trc:
2005-11-01 15:16:54 Thread-3836 WARN main: clear collection state due to OMS_version difference
2005-11-01 15:16:54 Thread-3836 WARN command: Job Subsystem Timeout set at 600 seconds
2005-11-01 15:16:54 Thread-3836 WARN upload: Upload manager has no Failure script: disabled
2005-11-01 15:16:54 Thread-3836 WARN upload: Recovering left over xml files in upload directory
2005-11-01 15:16:54 Thread-3836 WARN upload: Recovered 0 left over xml files in upload directory
2005-11-01 15:16:54 Thread-3836 WARN metadata: Metric RuntimeLog does not have any data columns
2005-11-01 15:16:54 Thread-3836 WARN metadata: Metric collectSnapshot does not have any data columns
2005-11-01 15:16:54 Thread-3836 ERROR engine: [oracle_bc4j] CategoryProp NAME [VersionCategory] is not one of the valid choices
2005-11-01 15:16:54 Thread-3836 ERROR engine: ParseError: File=D:\oracle\product\10.1.0\dg\sysman\admin\metadata\oracle_bc4j.xml, Line=486, Msg=attribute NAME in <CategoryProp> cannot be NULL
2005-11-01 15:16:54 Thread-3836 WARN metadata: Column name EFFICIENCY__BYTES_SAVED_WITH_COMPRESSION__AVG_PER_SEC_SINCE_START too long, truncating to EFFICIENCY__BYTES_SAVED_WITH_COMPRESSION__AVG_PER_SEC_SINCE_STAR
2005-11-01 15:16:54 Thread-3836 WARN metadata: Column name ESI__ERRORS__ESI_DEFAULT_FRAGMENT_SERVED__AVG_PER_SEC_SINCE_START too long, truncating to ESI__ERRORS__ESI_DEFAULT_FRAGMENT_SERVED__AVG_PER_SEC_SINCE_STAR
2005-11-01 15:16:54 Thread-3836 WARN metadata: Column name SERVERS__APP_SRVR_STATS__SERVER__REQUESTS__AVG_PER_SEC_SINCE_START too long, truncating to SERVERS__APP_SRVR_STATS__SERVER__REQUESTS__AVG_PER_SEC_SINCE_STA
2005-11-01 15:16:54 Thread-3836 WARN metadata: Column name SERVERS__APP_SRVR_STATS__SERVER__LATENCY__MAX_PER_SEC_SINCE_START too long, truncating to SERVERS__APP_SRVR_STATS__SERVER__LATENCY__MAX_PER_SEC_SINCE_STAR
2005-11-01 15:16:54 Thread-3836 WARN metadata: Column name SERVERS__APP_SRVR_STATS__SERVER__LATENCY__AVG_PER_SEC_SINCE_START too long, truncating to SERVERS__APP_SRVR_STATS__SERVER__LATENCY__AVG_PER_SEC_SINCE_STAR
2005-11-01 15:16:54 Thread-3836 WARN metadata: Column name SERVERS__APP_SRVR_STATS__SERVER__OPEN_CONNECTIONS__MAX_SINCE_START too long, truncating to SERVERS__APP_SRVR_STATS__SERVER__OPEN_CONNECTIONS__MAX_SINCE_STA
2005-11-01 15:16:54 Thread-3836 WARN metadata: Column name SERVER__APP_SRVR_STATS__SERVER__REQUESTS__MAX_PER_SEC_SINCE_START too long, truncating to SERVER__APP_SRVR_STATS__SERVER__REQUESTS__MAX_PER_SEC_SINCE_STAR
2005-11-01 15:16:54 Thread-3836 WARN metadata: Column name SERVER__APP_SRVR_STATS__SERVER__REQUESTS__AVG_PER_SEC_SINCE_START too long, truncating to SERVER__APP_SRVR_STATS__SERVER__REQUESTS__AVG_PER_SEC_SINCE_STAR
2005-11-01 15:16:54 Thread-3836 WARN metadata: Column name SERVER__APP_SRVR_STATS__SERVER__OPEN_CONNECTIONS__MAX_SINCE_START too long, truncating to SERVER__APP_SRVR_STATS__SERVER__OPEN_CONNECTIONS__MAX_SINCE_STAR
2005-11-01 15:16:54 Thread-3836 WARN metadata: Metric Wireless_PID does not have any data columns
2005-11-01 15:16:54 Thread-3836 WARN metadata: Metric numberOfAppDownloadsOverInterval_instance does not have any data columns
2005-11-01 15:17:00 Thread-4172 WARN vpxoci: OCI Error -- ErrorCode(1017): ORA-01017: invalid username/password; logon denied
SQL = " OCISessionBegin"...
LOGIN = dbsnmp/<PW>@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=MY_DATABASE)(PORT=1521))(CONNECT_DATA=(SID=CPD2DB)))
2005-11-01 15:17:00 Thread-4172 ERROR vpxoci: ORA-01017: invalid username/password; logon denied
2005-11-01 15:17:00 Thread-4172 WARN vpxoci: Login 0xe8c220 failed, error=ORA-01017: invalid username/password; logon denied
2005-11-01 15:17:00 Thread-4172 WARN TargetManager: Exception in computing dynamic properties of {MY_DATABASE, oracle_database },MonitorConfigStatus::ORA-01017: invalid username/password; logon denied
2005-11-01 15:17:01 Thread-4172 WARN vpxoci: OCI Error -- ErrorCode(1017): ORA-01017: invalid username/password; logon denied
I've already toggled the Local Security Policy (Log On As Batch Job) setting in Windows, unlocked the Monitoring Profile account, etc. I've also tried to set the Preferred Host Credentials for the database, but it doesn't seem to want to authenticate the Windows 2003 Administrator user.
Anyone have any other suggestions?Check the following:
Does the user have administrative privilege on the system?
Is the user running this part of ORA_DBA group?
Does the user have the local security policy "Logon as Batch Job"?
Have you set the OS Preferred Credential? If you are a domain user, this will be looking for domain\user name instead of just the user name.
On another note:
Have you doen any upgrades to the OMS repository?
If yes, is the new Repository compatible with the EM Console? -
DPM Agent Installer Fails with errorcode =0x80070643
I've seen this all over the place. Sometimes it's with DPM 2007 but I'm using an evaluation version of DPM 2010. I'm trying to install the agent on a protected server running Windows
2008 Standard with Service Pack 2. This is our Exchange 2007 server and is also running ForeFront.
I initially tried installing from the DPM server and received the following error code
Install protection agent on PS failed:
Error 313: The agent operation failed because an error occurred while running the installation program on PS.
Error details: Fatal error during installation (0x80070643)
Recommended action: Review the log files on PS: [windir]\temp\msdpm*.log and take appropriate action. Retry the operation, and if the error persists, restart the computer
and then retry the operation again.
I reviewed the error logs but I didn't know exactly what to look for and I don't see anything that jumps out at me.
On other sites I have seen instructions for a manual install on the protected server after disabeling the firewall and so I tried that.
On the protected server I mapped a drive to the folder containing the agent on the DPM server. I ran Net stop mpssvc. Then I launched the installer DPMAgentInstaller_x64.exe. When
I ran that I received a different error.
DPMAgentInstaller failed with errorcode =0x80070643, error says: Fatal error during installation.
Check log files in [WINDIR]temp\MSDPM*.LOG
Press Enter key to close the window
I rebooted and tried again with the same error.
On another page I read that someone asked about the paging file so I verified that there was sufficient space allocated (only 2/3 of the allocated space is being used).
Our primary partition has over 50GB of free space and our data partition has over 370 GB free.
I can post sections of the log files if that would help.
ThanksDan,
This is usually a problem with the installer. I've seen this in DPMRA.msi installation failures when In some instances the default permissions of the scheduled tasks directory altered.
The following is a sample from the failing MSDPMAgentBoostrap0Curr.errlog file.
WARNING Failed: Hr: = [0x80070424] : F: lVal : (HANDLE)(schService = OpenServiceW( schSCManager, strServiceName.PeekStr(), (0x00010000L) | 0x0020 | 0x0004 | 0x0002))
WARNING Failed: Hr: = [0x80070424] DeleteServiceByName for service[DPMClientService] failed
WARNING Failed: Hr: = [0x80070002] : Error while deleting the Scheduled Task [ScheduledDPMClientBackup]
WARNING Failed: Hr: = [0x80070002] DeleteScheduledTaskByName failed
WARNING Failed: Hr: = [0x80070005] : F: lVal : pTaskScheduler->NewWorkItem(pwszClientTaskName, CLSID_CTask, IID_ITask, (IUnknown**)&pTask)
WARNING Failed: Hr: = [0x80070005] AddScheduledTaskForClient failed
The service deletion failure is fine since it fails with 0x80070424 (ERROR_SERVICE_DOES_NOT_EXIST - The specified service does not exist as an installed service). The same goes with the scheduled task deletion with the error 0x80070002 (ERROR_FILE_NOT_FOUND
- The system cannot find the file specified). The installer was removing old services or tasks that may be lingering and if they do not exist we will get the above errors.
The access is denied error on the task creation is the aberration that must be addressed.
The permissions on %windir%\Tasks need to allow write access to the account doing the DPMRA.msi install.
Some have implemented group policies to lock down the permissions on the Tasks directory. This was done to combat the Conficker worm. Please see
KB 962007 Virus alert about the Win32/Conficker worm for more details.
Note: You must reset the default permissions on the Task directory. See the "After the environment is fully cleaned" section of the KB article.
If not this let us know.
/Steve
Steve L [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights. -
Hi Everybody,
I m following KFI process for Invoice Processing.The document image is successfully loaded into UCM and display in IPM search criteria.But the thing is that when ever i m watching Documentrouting in EM ,there is no instance created .
IPM logs:Workflow Agent login failure
Please guide me how to solve this one.
With Regards
JyotiHi Everybody,
Actually imaging.ear was missing.It has solved with the patch installation for soa suite 11.1.1.3 in linux machine.
Thnx for co-operation.
With Regards
Jyoti -
Installation Failure: Windows failed to install the following update with error 0x800F0922
Hi folks,
I have a HP Elitebook Folio 9470p. It came with Windows 8, and I installed it on my corporate domain. I was trying to do some Windows updates so I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them. It has about 18 updates it needs from security updates to a .net framework update. I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do. It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one. I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail. Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922 error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3) Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts.
Phil -
Windows 8 installation failure with German language pack
Hi,
I have a Lenovo ThinkPad Edge E330 with Windows 8. We just received it over Xmas - nice product. Just one Thing so far: I can't get the German language pack installed. Language, Keyboard layout and other regional Settings are set to German. After downloading the German language pack through Language->German->options->Download and Install Language pack (German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP])I always run into the following error during the Installation (download seems to be fine, error happens after about 2/3 of the Installation - if you believe the Progress bar). From the Event Viewer:
Installation Failure: Windows failed to install the following update with error 0x80070002: German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP].
I already tried quite some stuff without success: no pending Upgrades, several reboots, switching off Firewall/anti-Virus, selective reboot just with Winodws Services and Startup stuff, ... No success.
Does anybody have seen a similar Problem? Anybody with a solution to get the German language pack finally installed?
Thanks in advance for your Support,
Ingo
Event-Details:
System
Provider
[ Name]
Microsoft-Windows-WindowsUpdateClient
[ Guid]
{945A8954-C147-4ACD-923F-40C45405A658}
EventID
20
Version
1
Level
2
Task
1
Opcode
13
Keywords
0x8000000000000028
TimeCreated
[ SystemTime]
2012-12-28T10:06:26.588367000Z
EventRecordID
2032
Correlation
Execution
[ ProcessID]
388
[ ThreadID]
2640
Channel
System
Computer
Lenovo-PC
Security
[ UserID]
S-1-5-18
EventData
errorCode
0x80070002
updateTitle
German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP]
updateGuid
{B9991A98-7903-4A91-B17A-818B1C1D9633}
updateRevisionNumber
200
serviceGuid
{9482F4B4-E343-43B6-B170-9A65BC822C77}Hi SOL
For more information , please find the below download link.
http://software.cisco.com/download/release.html?mdfid=282806052&release=8.6.6&relind=AVAILABLE&flowid=221&softwareid=282774363&rellifecycle=&reltype=latest
Thank you
please rate all useful information -
Adobe Camera Raw 6.7 Installation Failure
From Adobe Bridge CS5, I enter Help, then Updates.
Adobe Application Manager informs me that I can update Adobe Camera Raw to 6.7.
I click to install, the software is downloaded tha I get an Installation Failure message.
When I click on 'Customer Support' on the screen, I am directed to 'http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html'.
At no point during the installation was I asked for the serial number.
Regards
MikePlease confirm your ACR version from Help->About Plugin->Camera Raw and provide us with the following logs.
You can find them at:
ACR Installer logs
For Mac:
Library\Logs\Adobe\Installer
For Win:
Program Files(x86)\Common Files\Adobe\Installers
AAM logs
For Mac:
/Volumes/%Volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0
For Win:
C:\Users\<username>\AppData\Local\Adobe\AAMUpdater
You can zip all the files together and send us through mail. This would help us in finding the root cause.
Appreciate your help. Apologize for the inconvenience.
Regards,
Ashutosh
[email protected] -
Acrobat X pro installation failure
I always have had problem with Acrobat installation.
Last time it make me completely reinstalled Windows before I can successfully installed Acrobat. However, recently my Win 8.1 pro has had problem so I decided to reinstall Windows from scratch. Again, I encountered Acrobat installation failure.
Here are the error messages:
ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
----------- Payload: {CA7C485C-7A89-11E1-B2C8-CD54B377BC52} Adobe Fireworks CS6 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at L:\Adobe CS6\payloads\AdobeFireworks12-mul\OEM(Seq 2141)
----------- Payload: {05E1E278-7A8D-11E1-A0B9-FC0245DB7244} Adobe Fireworks CS6_AdobeFireworks12en_USLanguagePack 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at L:\Adobe CS6\payloads\AdobeFireworks12en_USLanguagePack\OEM(Seq 76)
----------- Payload: {4FAB339E-2132-434F-9376-9CD735E4C69C} Adobe Flash CS6 12.0.0.0 -----------
ERROR: DR012: Setting Registry Value Failed. Error 5 Access is denied.(Seq 151)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
Infact, the Creative Suite is the very few first applications I installed after Windows set up.
Any clues on why this happens. I'm tired of reinstalling Windows again and again. But Acrobat is important for me.Errors "Exit Code: 6," "Exit Code: 7"
Mylenium -
FAM 8.0, Tomcat J2EE agent installation problem
Hello:
I was able to install FAM 8.0 in Tomcat 6.0.14 on Ubuntu (7.04) Linux. Everything seems fine. In the end, the applications I want to use with OpenSSO also make use of Tomcat 6.0.14. I noticed on the opensso users email list that the Tomcat 3.0 agent won't be available until early next year; but that the 2.2 agents should work with FAM 8.0. So, I got the the J2EE agent for Tomcat - SJS_Tomcat_Server_55_agent_2.2-01.tar.gz. The documentation makes no references to Tomcat 6, and I'm hoping this is due to the fact that Tomcat 6 was not available when the documentation was written.
Does this agent work with Tomcat 6? I have this problem when installing the agent (agentadmin --install):
$CATALINA_HOME environment variable is the root of the tomcat
installation.
[ ? : Help, < : Back, ! : Exit ]
Enter the $CATALINA_HOME environment variable: /Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14
Invalid directory specified for the $CATALINA_HOME environment variable
Invalid CATALINA_HOME directory :
/Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14I can see in debug/agentadmin.log the following:
[05/24/2008 13:06:37:684 PDT] FileSystemValidator : Is directory : /Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14 valid ? true
[05/24/2008 13:06:37:686 PDT] HomeDirValidator : Is $CATALINA_HOME directory /Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14 valid ? false
[05/24/2008 13:06:37:686 PDT] Invalid CATALINA_HOME directory : /Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14This directory does indeed exist, and is accessible by the user I'm logged in as. It appears FileSystemValidator agrees with me, but HomeDirValidator has a problem. I tried this on both Ubuntu 6.04 and Mac OS X 10.5.2. Does this indicate that Tomcat 6 is not supported? Or is it indicative that neither OS on which I've tried to install the agent is officially supported?
Thanks!
JeffHi Denis:
Before being redirected to another short term task, I did indeed get the Tomcat 6 agent to work. I probably won't be able to look at OpenSSO again seriously for another couple of months. :(
I have the OpenSSO server running on Tomcat 6.0.14 on Ubuntu 6.x Linux running in a virtual machine on my Mac. I was not able to get the server to run directly on the Mac, and I cannot remember the reason at this time.
But, as far as the agent goes, I run it again using Tomcat 6.0.14 on my Mac (Mac OS X 10.5.2), using the 1.5 JRE. I do have the agentapp war deployed as well as the agentsample web application to play with. In my catalina.out file:
Jun 18, 2008 10:07:20 AM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/6.0.14
Jun 18, 2008 10:07:20 AM org.apache.catalina.startup.HostConfig deployWAR
INFO: Deploying web application archive agentapp.war
Jun 18, 2008 10:07:21 AM org.apache.catalina.startup.HostConfig deployWAR
INFO: Deploying web application archive agentsample.war
Jun 18, 2008 10:07:22 AM org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on http-8090
Jun 18, 2008 10:07:22 AM org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:8011
Jun 18, 2008 10:07:22 AM org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/16 config=nullI have no error messages is any Tomcat log file.
I checked out the source code for the Tomcat v6 agent (2.2) on May 27, so I don't know how that compares to yours or what's been checked into CVS since my build. I also don't know what the OpenSSO NamingService is.
I assume you used fully qualified domain names to specify the web application to be protected by agent as well as the OpenSSO server itself. The following is the output of the conversation when I run the agent installer script on my system. It has been redacted a bit (domain name and encryption key) to protect my client, but otherwise this is what I supplied to the installer:
Enter the complete path to the directory which is used by Tomcat Server to
store its configuration Files. This directory uniquely identifies the
Tomcat Server instance that is secured by this Agent.
[ ? : Help, ! : Exit ]
Enter the Tomcat Server Config Directory Path
[/opt/apache-tomcat-6.0.14/conf]: /Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14/conf
Enter the fully qualified host name of the server where Access Manager
Services are installed.
[ ? : Help, < : Back, ! : Exit ]
Access Manager Services Host: login.opensso.example.com
Enter the port number of the Server that runs Access Manager Services.
[ ? : Help, < : Back, ! : Exit ]
Access Manager Services port [80]: 8080
Enter http/https to specify the protocol used by the Server that runs Access
Manager services.
[ ? : Help, < : Back, ! : Exit ]
Access Manager Services Protocol [http]:
Enter the Deployment URI for Access Manager Services.
[ ? : Help, < : Back, ! : Exit ]
Access Manager Services Deployment URI [/amserver]: /opensso
Enter the fully qualified host name on which the Application Server
protected by the agent is installed.
[ ? : Help, < : Back, ! : Exit ]
Enter the Agent Host name: analysis.opensso.example.com
$CATALINA_HOME environment variable is the root of the tomcat
installation.
[ ? : Help, < : Back, ! : Exit ]
Enter the $CATALINA_HOME environment variable: /Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14
Choose yes to deploy the policy agent in the global web.xml file.
[ ? : Help, < : Back, ! : Exit ]
Install agent filter in global web.xml ? [true]:
Enter the preferred port number on which the application server provides its
services.
[ ? : Help, < : Back, ! : Exit ]
Enter the port number for Application Server instance [80]: 8090
Select http or https to specify the protocol used by the Application server
instance that will be protected by Access Manager Policy Agent.
[ ? : Help, < : Back, ! : Exit ]
Enter the Preferred Protocol for Application Server instance [http]:
Enter the deployment URI for the Agent Application. This Application is used
by the agent for internal housekeeping.
[ ? : Help, < : Back, ! : Exit ]
Enter the Deployment URI for the Agent Application [/agentapp]:
Enter a valid Encryption Key.
[ ? : Help, < : Back, ! : Exit ]
Enter the Encryption Key [XXmyencryptionkeyXX]:
Enter a valid Agent profile name. Before proceeding with the agent
installation, please ensure that a valid Agent profile exists in Access
Manager.
[ ? : Help, < : Back, ! : Exit ]
Enter the Agent Profile name: testagent1
Enter the path to a file that contains the password to be used for identifying
the Agent.
[ ? : Help, < : Back, ! : Exit ]
Enter the path to the password file: /Users/jas/Development/opensso/tryout/agent_password
SUMMARY OF YOUR RESPONSES
Tomcat Server Config Directory :
/Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14/conf
Access Manager Services Host : login.opensso.example.com
Access Manager Services Port : 8080
Access Manager Services Protocol : http
Access Manager Services Deployment URI : /opensso
Agent Host name : analysis.opensso.example.com
$CATALINA_HOME environment variable :
/Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14
Tomcat global web.xml filter install : true
Application Server Instance Port number : 8090
Protocol for Application Server instance : http
Deployment URI for the Agent Application : /agentapp
Encryption Key : XXmyencryptionkeyXX
Agent Profile name : testagent1
Agent Profile Password file name :
/Users/jas/Development/opensso/tryout/agent_password
Verify your settings above and decide from the choices below.
1. Continue with Installation
2. Back to the last interaction
3. Start Over
4. Exit
Please make your selection [1]: 1
Updating the
/Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14/bin/setclasspath.sh
script with the Agent classpath ...DONE.
Creating directory layout and configuring Agent file for Agent_001
instance ...DONE.
Reading data from file
/Users/jas/Development/opensso/tryout/agent_password and encrypting
it ...DONE.
Generating audit log file name ...DONE.
Creating tag swapped AMAgent.properties file for instance Agent_001 ...DONE.
Creating a backup for file
/Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14/conf/server.xml
...DONE.
Creating a backup for file
/Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14/conf/web.xml
...DONE.
Adding SJS Tomcat Agent Realm to Server XML file :
/Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14/conf/server.xml
...DONE.
Adding filter to Global deployment descriptor file :
/Users/jas/Development/opensso/tryout/apache-tomcat-6.0.14/conf/web.xml
...DONE.
Adding SJS Tomcat Agent Filter and Form login authentication to selected Web
applications ...DONE.
SUMMARY OF AGENT INSTALLATION
Agent instance name: Agent_001
Agent Configuration file location:
/Users/jas/Development/opensso/tryout/tomcat_v6_agent/Agent_001/config/AMAgent.properties
Agent Audit directory location:
/Users/jas/Development/opensso/tryout/tomcat_v6_agent/Agent_001/logs/audit
Agent Debug directory location:
/Users/jas/Development/opensso/tryout/tomcat_v6_agent/Agent_001/logs/debug
Install log file location:
/Users/jas/Development/opensso/tryout/tomcat_v6_agent/logs/audit/install.log
Thank you for using Access Manager Policy Agent
[jaslap:tryout/tomcat_v6_agent/bin] jas% Can you post the exception details you're getting. That might help someone diagnose the problem.
Take it easy,
Jeff -
ZLM Agent IR2 agent installation fails
Hi all
I have installed ZLM 7.3 IR2 Server in SLES 10 SP2. The ZLM Server setup is not able to complete on sles11 server, the system hangs. Also when trying to install the ZLM 7.3 IR2 agent on SLED 11 OS, the installation starts & hangs in the middle.
Some of the error messages are
1)Error no 111 Connection Refused
2) when executed the zlm-config file it displays the "OS is not supported version"
The SuSEfirewall is set to stop & iptables rules were not set.
I have tried the ZLM 7.3 IR2 agent installation in a freshly installed SLED 10 machine, but the machine is not able to contact the server (host name not found). I have not configured DNS service in the server machine. Please provide suggestions in the ZLM 7.3 IR2 agent installation.baranii,
a few questions for my understanding:
I have installed ZLM 7.3 IR2 Server in SLES 10 SP2.
This is a running ZLM server and you try to register the other devices to this server. Correct ?
The ZLM Server setup is not able to complete on sles11 server, the system hangs.
SLES 11 or SLES 11 SP1 ? For SLES 11 SP1 you would need to use ZLM 7.3 IR3.
Do you want to install another ZLM server on this SLES 11 server or just the agent ?
I have tried the ZLM 7.3 IR2 agent installation in a freshly installed SLED 10 machine, but the machine is not able to contact the server (host name not found). I have not configured DNS service in the server machine.
The agent must be able to resolve the dns name of the zlm server.
You can either configure DNS or you can add an entry to the /etc/hosts file of the managed device. But you must make sure the device can afterwards ping the ZLM server by its name. (ping <ZLM Server Name>).
It is possible to register the zlm server by its ip address and not by it's name, but5 I would recommend to use the dns name.
So if you have fixed the name resolution and retry the agent installation, verify the zlm-install.log file if a installation fails. That log file is available in /var/opt/novell/logs/zenworks. Go from the end back and look for errors or warnings.
Rainer -
I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITunes is corrupted or is not installed correctly. Please reinstall Itunes"
I went a step further than before and got itunes running again.
The Updater had also installed Quicktime.
I launched quicktime, it appeared to be configuring and then launched. Then when I run Itunes now it is working...
Hope this is your problem also. -
Need Agent Installer for Solaris (SPARC)
Hi All,
I have downloaded Grid Control Agent Installer for Solaris from http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html.
When I tried to extract the zip file, I am getting the following error message.
"Can not open file. It does not appear to be a valid archive. If you downloaded this file, try downloading the file again."
Even I tried using http://sac.us.oracle.com/download/index.html also but getting the same error.
Please send me the location if you have,
Thanks
SumathiMost commands are identical. Performance analysis, loading all are similar. Tape interaction, creation of tape devices is going to be pretty much the same.
The differences show up a lot at the hardware level. HBAs aren't usually the same, many drivers (and their quirks) are different between the architectures. If you're debugging connectivity to a tape library, those differences may be critical.
So you can't get as close as you may want, but I'll bet it would still be helpful.
Darren -
MBSA Windows Update Agent installation
I'm implementing MBSA on our domain. I've worked through the various firewall issues, etc. Next I received a Security Update Scan Result that "Computer has an older version of the client and security database demands a newer
version. Current version is and minmum required version is ." This is pasted directly from the screen. It appears information is missing from the message.
Based on research of the message, I reran the scan with the "Configure computers for Microsoft Update and scanning prerequisites" option selected. Then I get the result "Windows Update Agent installation succeeded.Restart
the target computer to have Windows Update Agent updated completely." Scanning the computer after a restart just repeats the same results. Looking in the WindowsUpdate.log on the target computer, there are messages stating that 3
CBS packages were evaluated and that each is not applicable. "WUESTUP has finished. Exit code is 0. Reboot is NOT needed." I have checked and the
wuaueng.dll version is 7.6.7600.256, which I believe is the latest.
I have seen this result on multiple Windows 7 computers I have tested. None have worked so far. What is causing MBSA to report one thing and the target to indicate something else?
Ken Kemp Eddy County, NM ITAt this point, no. Since I didn't turn up an answer here, I've had to set this aside for more pressing matters. I hope to get back to it at some point soon.
If you are fortunate enough to find an answer, please be sure to share it here.
Ken Kemp Eddy County, NM IT -
Diagnostics Agent 711 - SAP Host Agent - Installation on a cluster environm
Dear all,
We have the following architecture in our productive environment :
1. Cluster 01 is composed of 2 nodes.
On Cluster 01, only "Database" and "Central Services" are running
for 5 productive SAP systems.
2. Cluster 02 is composed of 6 nodes.
On Cluster 02, only "Central Instance" and "Application Server"
are running for 5 productive SAP systems
As read in "Diagnostics Agents installation Strategy", rules #4, slide 12 :
===================================================================
- Do not install a Diagnostics Agent on host that only run Database
or SAP Central Services.
- Install a Agent on EACH host running a Central Instance (CI)
and / or a Dialog Instance
===================================================================
For our productive environment, we do have to install Diagnostics Agents 7.11 on cluster 02 where we have CI + AS running.
Questions :
1. How do we monitor "database" and "central services" data on cluster 01 (DB + CS) as far as no "Diagnostics Agents"
are installed ?
2. Do we have to install the new "SAP HOST AGENT" in our cluster 01 ?
3. As written in "Downloading and Installing Package SAPHOSTAGENT"
guide, "you only need to install the host agent host taht not have
an SAP Component". Does it mean that the new "SAP HOST AGENT"
will have to be installed on our cluster 01 to monitor "DB+CS" data ?
4. What are for SAP a host that not have SAP Component ... ?
"Database" and "Central Service" running for a SAP system should be consider as SAP Component or not ... ?
5. What is the difference between the new "SAP HOST AGENT" delivered by SAP today 23.11.2009
and the "Wily Host-Level Introscope Agent"
delivered by CA ?
Best regards
PCYes, it has to be installed.
Maybe you are looking for
-
Acrobat 9 Pro Extended crashes when trying to distribute form
Hi. I am experiencing an issue with Adobe Acrobat 9 Pro Extended on Windows XP Pro SP3 32-bit. I have created a pdf file derived from an html and css file. The pdf file comes out perfectly with form fields automatically detected, etc. However, when I
-
Hi there, i have an issue installing oracle forms and reports. its throwing this error"INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Make sure to install and configure the product in supported modes." on
-
Security Permissions for simple file transfer
Hey All I'm transferring a file using RMI as part of an enhancement. I want to restrict where the file can be transferred to and thus will use a security manager (On the destination object). However the object its being transferred to shares the same
-
Are their any tutorials out there for begginers of Logic Pro 7...
I'm really starting to feel kinda stupid with this logic pro 7 program somebody please help me! if not i'm realling thinking about selling my laptop and logic pro 7 to get a akai mpc 2500..... holthiphopminister
-
Make dual boot Lion and Snow Leopard Mac ???
I have a SSD for my MBP. I formatted it with two partitions and installed snow leopard on each. I also have a 400 GB HDD that has snow leopard on it. I'd like to trade out my optical drive for the SSD. I'd like to update one SSD partition to Lion, th