11.1.0.7 certified with windows 2003 (32bits) server?
Hi,
Is 11.1.0.7 release certified with Win2003 (32bits) server? I only found 11.1.0.7 for windows server 2008 (32bits) on Oracle download site.
Thanks!
See your duplicate post here - 11.1.0.6 to 11.1.0.7
For Win 2003, 11.1.0.7 is a patch that needs to be downloaded from My Oracle Support. You install it on top of a 11.1.0.6 install.
Access to My Oracle Support requires a valid Customer Support Identifier, which is given when you purchase support from Oracle.
HTH
Srini
Similar Messages
-
Acrobat Pro installed on a Windows 2003 32bit server - where's the 64bit driver?
Hello.
I'm still newbie with Acrobat Pro so please bear with me if this is a silly question.
A prospect of ours installed the TRIAL version of Acrobat Pro Extended on a 32bit Windows 2003 server and everything went fine; this server "serves" a number of Windows 7 64bit boxes which are supposed to share the PDF Printer created on the Win2003 server during the installation.
Problem is that when the printer gets shared and clients try to install it, the 64bit driver could not be found.
The customer tried to install the 64bit driver on the Win2003 box but he does not know where to find the correct .INF file for 64bit windows client.
Thanks,
RobTwo facts for consideration. As I understand it the trail only comes in 64-bit. Don't know for sure since I have never downloaded it, but that is a faint memory.
More importantly, read the EULA carefully before you purchase for the type of application you listed. The general EULA does not allow the use of Acrobat on a server in the manner you have indicated. You have to purchase Acrobat for each machine, not a server. You may have enough that need to use the product that a volume license is in order -- contact Adobe for that. In the meantime, use the Acrobat Trail to test the features and such to be sure it meets your needs (other than the server use). -
Oracle 10.2.0.3 Full Client for Windows 2003 32bit
Hello,
I know this is a stupid question, but I cannot seem to find the download for the full client for 10.2.0.3 for Windows 2003 32bit server. I have found the instant client, but not the full client.
Thanks in advance.
BrianHi Zekmoe,
do you have the PATCHES tab in Metalink (metalink.oracle.com)?
If not, please check your PROFILE in metalink - if PATCHES and UPDATES says: NO, then please contact your administrator (mentioned also in your PROFILE) to enable the patch download.
If you'll have the PATCHES tab then go to QUICK LINKS in the patch screen and choose Windows 32bit and 10.2.0.3
Hope this helps - kind regards
Mike -
11.1.0.1.0 GC certification with Windows 2003 SP2
The certification guide shows GC 11.1.0.1.0 certified for Windows Server 2008, Windows Server 2003 R2; Windows 2003 (32 bit) with SP2/R2+, Windows7
Confirmation required is GC 11.1.0.1.0 is also certified for Windows 2003 SP2 or we require Win 2003 R2 minIts certified on 2003 SP2 as well.
-
Hi
Anyone knows whether Windows 2008 R2 domain controllers with Windows 2003 forest functional level will still be Supported after Windows 2003 support ends in July 2015 ?
ThanksWhen Windows Server 2003 support ends, you should not have a Windows Server 2003 Domain Controller running if you would like to be supported by Microsoft. This means that there will be no reason to have a DFL or FFL that is lower than Windows Server 2008.
So, if you are keeping Windows Server 2003 FFL to keep DCs running Windows Server 2003 then this is not supported.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
Is Oracle Developer 10g certified with Windows 7 and IE-8 ?
Hi All,
Is Oracle Developer 10g certified with Windows 7 and IE-8 ?
Regards,Is Oracle Developer 10g (32-bit and 64-bit) certified with Windows 7 (32-bit and 64 bit) and IE-8 ?Yes it is certified on 32-bit only -- Oracle Forms/Reports Builder 10gR2 or 11g are certified with Windows 7 (32-bit)
Please see (Forms / Reports Builder 10gR2 or 11g Certification on MS Windows 7 [ID 1112213.1]) for details.
Also, see (Cannot Open Forms/Reports Within Forms/Reports Builder 10gR2(10.1.2.3) on Windows 7 [ID 1306651.1]).
Thanks,
Hussein -
Error export from my database sql 2005 with Windows 2003 abap+java
Hi all
I'm trying to create an Export from my database sql 2005 with Windows 2003, but SAPINST starts with an error. ABAP+JAVA stack
While running the export preparation, I am getting the following error;
INFO 2010-09-08 12:12:43
Output of C:\j2sdk1.4.2_13-x64\bin\java.exe -classpath D:\usr\sap\BID\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jce.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jsse.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_smime.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_ssl.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/w3c_http.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/antlr.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/exception.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/jddi.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/logging.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/offlineconfiguration.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/opensqlsta.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SDMutil.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SLUtil.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\base.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\util.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\sqlserver.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\spy.jar -export -type=keydb "-expfile=C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS/PREEXP/usages_data.xml" -log=UTL_load_usages.log -sid=BID -dsn=jdbc/pool/BID -ssprops=D:/usr/sap/BID/SYS/global/security/data/SecStore.properties -ssk=D:/usr/sap/BID/SYS/global/security/data/SecStore.key is written to the logfile C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS/PREEXP/UTL.java.log.
WARNING 2010-09-08 12:12:46
Execution of the command "C:\j2sdk1.4.2_13-x64\bin\java.exe -classpath D:\usr\sap\BID\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jce.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jsse.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_smime.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_ssl.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/w3c_http.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/antlr.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/exception.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/jddi.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/logging.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/offlineconfiguration.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/opensqlsta.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SDMutil.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SLUtil.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\base.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\util.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\sqlserver.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\spy.jar -export -type=keydb "-expfile=C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS/PREEXP/usages_data.xml" -log=UTL_load_usages.log -sid=BID -dsn=jdbc/pool/BID -ssprops=D:/usr/sap/BID/SYS/global/security/data/SecStore.properties -ssk=D:/usr/sap/BID/SYS/global/security/data/SecStore.key" finished with return code 64. Output:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_13-b06, mixed mode)
ERROR 2010-09-08 12:12:46
CJS-30071 Execution of UTL tool 'C:\j2sdk1.4.2_13-x64\bin\java.exe -classpath D:\usr\sap\BID\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jce.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jsse.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_smime.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_ssl.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/w3c_http.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/antlr.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/exception.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/jddi.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/logging.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/offlineconfiguration.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/opensqlsta.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SDMutil.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SLUtil.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\base.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\util.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\sqlserver.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\spy.jar -export -type=keydb "-expfile=C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS/PREEXP/usages_data.xml" -log=UTL_load_usages.log -sid=BID -dsn=jdbc/pool/BID -ssprops=D:/usr/sap/BID/SYS/global/security/data/SecStore.properties -ssk=D:/usr/sap/BID/SYS/global/security/data/SecStore.key' aborts due to database connection error with return code 64.<br>DIAGNOSIS: The connection parameters are wrong or the database server is shutdown.<br> SOLUTION: Check 'UTL_load_usages.log' and 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS/PREEXP/UTL.java.log' for more information.
ERROR 2010-09-08 12:12:46
FCO-00011 The step getUsageTypes with step key |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_Java_Prepare_Export_Dialog|ind|ind|ind|ind|5|0|getUsageTypes was executed with status ERROR .
Could anyone please help me out on this, if possible?
Thanks
JMHi,
please ensure that you use a SAP supported JDK as below:
716604 for the Sun JDK (Windows, Linux, Solaris)
709140 Recommended JDK and VM Settings for the WebAS630/640/7.0
And the re try the export pls.
Regards,
Snow -
Is Crystal RAS 9 compatible with Windows 2003 server?
We just upgraded out test RAS 9 server with Windows 2003 OS, and now the Crystal Report Application Server service won't start. We're getting a 1053 error. Is Crystal RAS 9 compatible with Windows 2003 server?
I do not believe 6X is supported in a 64 bit environment.
IF you are doing a fresh install on a different server, it should be easy to migrate your applications using the migration wizard in EAS. You can migrate applications, security everything except data. TO do that the easiest way is to export it and import into the application on the ner server. -
Big problems with Windows 2003 Server and FX5900
Getting repeated lockups using MSI FX5900XT and Windows 2003 Standard Server. Mouse stops responding and system occassionally locks up completely. I have a dual boot system and windows XP works fine. Windows 2003 works fine if I use the standard VGA driver (I use 1600x1200 16bit 75 Hz resolution and refresh).
The event log usually says:
Event Log
Event Type: Error
Event Source: nv
Event Category: None
Event ID: 108
Date: 18/07/2004
Time: 13:28:25
User: N/A
Computer: HOME
Description:
The driver nv4_disp for the display device \Device\Video0 got stuck in an infinite loop. This usually indicates a
problem with the device itself or with the device driver programming the hardware incorrectly. Please check with your
hardware device vendor for any driver updates.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Presently using the latest drivers
Any ideas
Thanks
WillIRQ 0 System timer OK
IRQ 1 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM1) OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 12 PS/2 Compatible Mouse OK
IRQ 13 Numeric data processor OK
IRQ 14 Primary IDE Channel OK
IRQ 15 Secondary IDE Channel OK
IRQ 16 Creative SB Audigy OK
IRQ 16 NEC PCI to USB Open Host Controller OK
IRQ 17 OHCI Compliant IEEE 1394 Host Controller OK
IRQ 17 NEC PCI to USB Open Host Controller OK
IRQ 18 NEC PCI to USB Enhanced Host Controller (B1) OK
IRQ 19 MSI MS-StarForce GeForce FX 5900XT (NVIDIA GeForce FX 5900XT) OK
IRQ 20 Standard OpenHCD USB Host Controller OK
IRQ 20 NVIDIA nForce MCP Networking Controller OK
IRQ 21 Standard OpenHCD USB Host Controller OK
IRQ 22 Standard Enhanced PCI to USB Host Controller OK
IRQ 22 OHCI Compliant IEEE 1394 Host Controller OK -
IDES 46E with windows 2003 server Installation errors..
Hi,
Can some body help me in IDES 46E with windows 2003 server Installation?.I'm tired of installing with this combination on my desktop my env as follows.
1.Windows 2003 Server
2.JDK.142
3.Oracle 9.0.2 with 7 patch
4.IDES 46E
Installed successfully Database and SAP but while exporting data in to tables then getting errors.
Thanks in advance..
SreedharHi GreetZ,
I opened the respective 3200,3300,and 3600 ports and I can access my router from outside home.I can also ping <IPAddress> and telnet<IPAddress> successfully.But I'm unable to telnet <IPAddress><space>3600 giving error..connection failed on port 3600 and same error for remaining ports too.Pls help me in fix this issue.
Thanks for your replies..
Sreedhar -
Locked files using a Windows 2003 File Server with Mac 10.6 clients running CS5
We migrated 40 Mac users from OS X 10.5/CS3 to OS X 10.6/CS5 back in November. Our InDesign files are kept on a Windows 2003 file server.
We have had fairly constant complaints of InDesign and Photoshop files being reported as locked when users try to save their work back to the server. This did not occur as frequently with CS3.
Has anyone else had this issue?I'd suggest starting with iFelix's Sharing files between a Windows XP PC and a Mac running OS 10.4.x
-
I dream of running Dreamweaver on a Windows 2003 Terminal Server
I have a "volume" license and attempted to install Dreamweaver CS4 on a Windows 2003 Terminal Server. I get an error message right away indicating that the system does not meet the minimum install requirements, ie XP/Vista.
Adobe volume licensing team verified that it is the correct license for installing on a terminal server, but after one hour of what would a bad nightmare with adobe "no" support (Outsourcing issue, failure to grasp and process the basic error message) I got no where and am having to resort to the forums. I have googled on this and got no where and nothing on the search efforts on this site.
If anyone has an idea of what is going on, bug, wrong install media, please clue me in.
Thanks!pziecina
Thanks for the information. We do have AppV here and tried that approach. While this gets us past the install minimum requirements, it does not resolve the issue of running of more than one instance at a time, per terminal server, even though our volume license allows for it. -
Oracle ODBC Driver (Windows 2003 x64 Server)
Hi all
I have some trouble with this ODBC Driver ...
I have installed Oracle Client 10.2.0.1.0 with the ODBC Driver and SQLplus etc.
Now I have configured in the "Net Manager" some "Service Naming" as I did
on other servers before. Then I Test the connection in the "Net Manager" it
seams to work fine.
When I now try to connect in SQL Plus the following error comes up:
ORA-12154: TNS:could not resolve the connect identifier specified
I did already do this:
- Add "...\NETWORK\ADMIN" to the Path Variable of the server
- sqlnet.ora looks like:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES)
- tnsnames.ora looks like:
MyName.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = myDomain.net)(PORT = 1521))
(CONNECT_DATA =
(SID = DBSIDxx)
What do I have to do to get this working ???
Thanks for any comments!
Best regards
Frank UrayNevermind, I think I'm to assume that this is the same as:
Re: unable to use SQL Plus (Windows 2003 x64 Server) -
IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit
Dear all,
we are just trying to install IDES 4.7:
IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit
But the installation break with error Message:
Error 5 (Access is denied.) in excution of a "NetServerGetInfo" function, line (233), with parameter (saptranshost, 101).
MOS-01224 Failed to add privileges "NetcbPrivilege SeAssignPrimaryTokenPrivile SeIncreaseQuotaPrivilege to account ....." ....
FJs-00012 Error when excuting script....
Any experience or help from your side?
Thanks in advance
HanseAtikHi. First login in your server with user "sid"adm after go to START --> RUN --> CMD
adn execute "R3trans -d" Tell what result .
About documentation read -->
service.sap.com/~form/sapnet?_SHORTKEY=00200797470000065912&
in left corner chek your release like :
"SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)"
After read the document for your release, for example if you use the Oracle on WIn and R/3 Enterprise 4.7 x 2.00 SR1 -->
Inst. Guide - R/3 Enterprise 4.7 x 2.00 SR1 on Win: Oracle
Regards.
Edited by: Sergo Beradze on Mar 21, 2008 10:55 AM -
Is is possible to add Windows 6 64-bit drivers to a Windows 2003 print server?
We are having some trouble figuring a way in which to support network printing for Windows 7 64-bit machines that we are starting to intermittently put out in what, as of this moment, is still primarily a native XP 32-bit environment. Our concern has been that, if we replace the drivers on the print server to the Windows 7 64-bit drivers, then the XP machines will then pull down those drivers and then not be able to print any longer. According to Microsoft, the way around this is to utilize the "Additional Drivers" area within the properites of the printer. From there, in theory, you can add a new driver that uses "x64" as the print processor. However, when we attempted to do this on our legacy Windows 2003 print server (which I believe to be 32-bit) we noticed that, in the "version area" of the selection for the x64 print processor, Windows 7 is not listed. We then receive the following error message after we attempt to go forward and add the driver. . .
-Selected printer driver not found
The specified location does not contain the driver HP LaserJet 4050 Series PCL6 for the requested processor architecture
It looks to me that the problem is in that the server is Windows 2003 and we are attempting to make Windows 7 drivers work within that framework. Can someone please confirm this suspician or instruct us further?
Thanks,
-Brian McKnightGotcha!!
I am done with mounting a secondary HDD (thanks to ifixit) and installing Windows 8 Pro 64 bit on it without a worry. Charm, charm!!
Boot Camp 5 guide prescribes all needed steps and when read and used correctly, installation must be an easy task. And all the existing apple hardwares work so good in the Windows environment too.
I am going to help out a friend of mine in doing a similar thing on his mac too. If you got specific questions, please do shoot up here and i should be able to get a reply to it (if at all).
Thanks everyone.
~ Narey
Maybe you are looking for
-
[SOLVED] GNOME 3 Multiple Crashes
I made a fresh install trying to make a cleaning to my system and now I'm having a lot of problems! Gnome 3 is giving me this problems (until now): 1) It crashes when I open xfce4-panel, or xfdesktop when using numix-icon-theme (?) I found more peopl
-
How do I set up a IIS site to allow page browsing by Android?
I am able to view web pages created with ASP.NET in my Android in a hosted site on the cloud. However, I cannot see the same site if I copy it to my Intranet's IIS for local access
-
How do you copy, for example I work with blue prints and I want to copy a section and copy into another new page?
-
Apex, Web Services, and complex data types?
Hi all, I was wondering if somebody could explain to me what sort of support apex has for using web services with complex data types, and how data returned like this could be interpreted and stored in the database. Any help would be aprreciated. Than
-
"IDOC Metadata not Found" - Error with Business Connnector 4.7
I have been trying to get our 4.7 installation of Business Connector going after having all kinds of issues getting 3.5 to run as a service on Windows Server 2003. I believe I am just about able to succesfully load the Idocs as I did in 3.5. However,