11.1.0.7 patch kit DBUA goes slow at 33% and runs for 21 hours +
Trying to upgrade 11.1.0.6 Windows Server 2003 32-bit install to 11.1.0.7 and finding that while the installer completes OK, when I get to running the DBUA part of the upgrade (interactively), it runs fine to about 33% (execrm.sql it would seem from the logfiles) and the Database Server upgrade step, and then the CPU meter flat-lines at 100%. DBUA does tick over slowly, and I let it run overnight but after 21 hours it had slowed down seemingly to a halt at 80% (though not hung). The log files were not being touched/updated through this time.
I restored from the backup, and retried, but it did the same thing. From what I've seen of others experiences, this DBUA part of the upgrade should only take 30 minutes.
Not a DBA during the day; not sure what to do from here. Can anyone provide a suggestion?
Thanks for that. It's now completed. I did have the OracleCSService started; associated with some 10g assets on the same box. Shut all ORACLE 10g processes down, and it flew through the problem step. It reported the I_DIANA_VERSION constraint violation, which I understand can be ignored, but it's also came up with:
+... checking the default Ultra Search instance.+
declare
*+
ERROR at line 1:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "WKSYS.WK_ADM", line 1096
ORA-06512: at line 59
... right at the end. Can't seem to find anything on this; Ultra-Search is marked VALID, so figure I can continue. When I ran the compilation script, it did run an Ultra Search validation which passed, so unsure whether this was a re-execution of the earlier 'check' that failed.
Many thanks to all who have contributed here.
Similar Messages
-
My iPhone 3GS has frozen. It was going slow all day, and has now completely frozen on the turning off screen. Anyone any ideas? Thanks.
The iOs 5.1 is a huge file that needs to be dowloaded when updating/restoring, your phone hasnt completed the update so its now in recovery mode. Look on the left of itunes, it should say downloads under the store section with a spinning wheel, click that and youll see the update file with a time remaining, wait for that download to finish then try the restore again and it should work
-
Can you guys help me ?
That is not too many by a long shot.
To speed up your iPod try:
- Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Hi,
Suddenly while working with Firefox if I happen to drag the vertical scroll bar, a very abnormal behavior occurs. My screen dances up and down for a short time before either going black or getting restored but with no clicks working. The only way to resume is to force a restart of the system.
Any help would be deeply appreciated.
Thanks and Regards
DeepakThat didn't work. On trying to install a new driver I got the error the graphics driver could not find compatible graphics hardware. Is there anything else that can be done to at least prevent the hanging of the computer even if it means less features from Firefox being available?
-
I am about to hook up my airport extreme. My cable modem goes into a router, and one of those ports will supply my airport extreme. I was told by the Apple Store that I would need to configure my airport extreme as a wirreless access point. How do I do this?
With sbcgobal I got a Gateway 2wire modem. What I would like to know is how do I set up my APE as remote?
Unfortunately, you won't be able to do this as few non-AirPort routers will work with AirPorts in a Wireless Distribution System (WDS). -
After patching XI system to SP14, disp+work not running
Hi All,
We have finished XI installation, then we also patching it from SP9->SP14 NW04s SR2. it works ok in SP9, but when we completed patching.
then when we start XI, it runs for 3-4mins, then disp+work in MMC stops.
following is the developer trace. pls help
Hardware: NT 2003 server. 3G cpu, 2G memory, 10G virtual memory
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid HXI
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 133
intno 20050900
make: multithreaded, Unicode, optimized
pid 2732
Mon Feb 25 15:27:35 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2732) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 133 successfully loaded
shared lib "dw_xtc.dll" version 133 successfully loaded
shared lib "dw_stl.dll" version 133 successfully loaded
shared lib "dw_gui.dll" version 133 successfully loaded
shared lib "dw_mdm.dll" version 133 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Feb 25 15:27:41 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >CDCXI_HXI_00 <
DpShMCreate: sizeof(wp_adm) 18672 (1436)
DpShMCreate: sizeof(tm_adm) 4270848 (21248)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06D30040, size: 4930904)
DpShMCreate: allocated sys_adm at 06D30040
DpShMCreate: allocated wp_adm at 06D32090
DpShMCreate: allocated tm_adm_list at 06D36980
DpShMCreate: allocated tm_adm at 06D369B0
DpShMCreate: allocated wp_ca_adm at 071494B0
DpShMCreate: allocated appc_ca_adm at 0714F270
DpShMCreate: allocated comm_adm at 071511B0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 071D2070
DpShMCreate: allocated gw_adm at 071D20B0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 071D20E0
DpShMCreate: allocated wall_adm at 071D20E8
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
Mon Feb 25 15:27:42 2008
J2EE server info
start = TRUE
state = STARTED
pid = 3016
argv[0] = C:\usr\sap\HXI\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\HXI\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\HXI\SYS\profile\HXI_DVEBMGS00_CDCXI
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=HXI
argv[7] = -DSAPMYNAME=CDCXI_HXI_00
argv[8] = -DSAPPROFILE=C:\usr\sap\HXI\SYS\profile\HXI_DVEBMGS00_CDCXI
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
Mon Feb 25 15:27:43 2008
***LOG Q0K=> DpMsAttach, mscon ( CDCXI) [dpxxdisp.c 11799]
DpStartStopMsg: send start message (myname is >CDCXI_HXI_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Mon Feb 25 15:27:44 2008
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 133
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Mon Feb 25 15:27:53 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4361]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1460
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1177) [nixxi.cpp 4361]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3016)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Mon Feb 25 15:28:23 2008
ERROR => DpHdlDeadWp: W0 (pid 3116) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W1 (pid 3104) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W2 (pid 3072) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W3 (pid 3148) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W4 (pid 3140) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W5 (pid 3120) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W6 (pid 3096) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W7 (pid 3092) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W8 (pid 3136) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W9 (pid 3080) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W10 (pid 3172) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W11 (pid 3164) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W12 (pid 3204) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:33 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Feb 25 07:28:33 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3116 Ended no 1 0 0
1 DIA 3104 Ended no 1 0 0
2 DIA 3072 Ended no 1 0 0
3 DIA 3148 Ended no 1 0 0
4 DIA 3140 Ended no 1 0 0
5 DIA 3120 Ended no 1 0 0
6 UPD 3096 Ended no 1 0 0
7 ENQ 3092 Ended no 1 0 0
8 BTC 3136 Ended no 1 0 0
9 BTC 3080 Ended no 1 0 0
10 BTC 3172 Ended no 1 0 0
11 SPO 3164 Ended no 1 0 0
12 UP2 3204 Ended no 1 0 0
Dispatcher Queue Statistics Mon Feb 25 07:28:33 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Mon Feb 25 07:28:33 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Feb 25 07:28:33 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:38 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >CDCXI_HXI_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2992) (SOFT_KILL)
Stop icman
killing process (2968) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2992 HANDLE:1556)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:39 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2992 HANDLE:1556)
wait for end of icman
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:40 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:41 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:42 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:43 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:44 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:45 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:46 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:47 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:48 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:49 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:50 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2968 HANDLE:1560)
[DpProcDied] Process died (PID:3016 HANDLE:1540)
DpStartStopMsg: send stop message (myname is >CDCXI_HXI_00 <)
NiIMyHostName: hostname = 'CDCXI'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Mon Feb 25 15:28:51 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12145]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1484 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1484 (pos=3)
SiSelNRemove: removed sock 1484
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1484
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2732) [dpxxdisp.c 10417]
Good Bye .....Yes, I have, following is dev_w0, thank you in advance.
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon Feb 25 15:40:12 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\HXI\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'C:\usr\sap\HXI\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'C:\usr\sap\HXI\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.115)
B New connection 0 created
M sysno 00
M sid HXI
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 133
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 2052
M
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2052) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 18672 (1436)
M DpShMCreate: sizeof(tm_adm) 4270848 (21248)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1544)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06D30040, size: 4930904)
M DpShMCreate: allocated sys_adm at 06D30040
M DpShMCreate: allocated wp_adm at 06D32090
M DpShMCreate: allocated tm_adm_list at 06D36980
M DpShMCreate: allocated tm_adm at 06D369B0
M DpShMCreate: allocated wp_ca_adm at 071494B0
M DpShMCreate: allocated appc_ca_adm at 0714F270
M DpShMCreate: allocated comm_adm at 071511B0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 071D2070
M DpShMCreate: allocated gw_adm at 071D20B0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 071D20E0
M DpShMCreate: allocated wall_adm at 071D20E8
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X
X Mon Feb 25 15:40:13 2008
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host CDCXI
M
M Mon Feb 25 15:40:14 2008
M calling db_connect ...
C Prepending C:\usr\sap\HXI\DVEBMGS00\exe to Path.
C Oracle Client Version: '10.2.0.2.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@HXI on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 073217F8 07326E94 0732671C
C Attaching to DB Server HXI (con_hdl=0,svchp=07326668,srvhp=07338264)
C
C Mon Feb 25 15:40:15 2008
C *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12541
[dboci.c 4313]
C *** ERROR => CONNECT failed with sql error '12541'
[dbsloci.c 11044]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@HXI on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 073217F8 07326E94 0732671C
C Detaching from DB Server (con_hdl=0,svchp=07326668,srvhp=07338264)
C Attaching to DB Server HXI (con_hdl=0,svchp=07326668,srvhp=07338264)
C
C Mon Feb 25 15:40:16 2008
C *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12541
[dboci.c 4313]
C *** ERROR => CONNECT failed with sql error '12541'
[dbsloci.c 11044]
B ***LOG BY2=> sql error 12541 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> ORA-12541: TNS:no listener [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 12541 performing CON [dblink#5 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-12541: TNS:no listener [dblink#5 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1440]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10380]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M req.vm = no VM
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server CDCXI_HXI_00 on host CDCXI (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Mon Feb 25 15:40:16 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10585
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2052) [dpnttool.c 327] -
So I keep trying to sync music to my iPhone from iTunes, and whenever I select the album the sync goes by really fast and nothing goes onto my phone. Then when I click "On this iPhone" it shows the songs, but they're grey, and I can't click on them. Help?
Ok, sorry. And yes, I just restored my iPhone as new and tried to put all the songs on there before I even restored with my previous backup, but it still does the same thing... even when I just checked the option to sync only "selected music or videos". How's that possible?
P.S. After I tried syncing with checked songs only, nothing showed up under Music on my phone and this message popped up in iTunes: "The iPhone "..." could not be synced because the sync session failed to finish." If you could, please tell me what that means, thanks. -
My I phone 4s 5.1.1 won't let me download or update anything it starts by "waiting" then loads half way n goes bak to "waiting" then does it against then it says that it's unable to download or update help please I've tried signing out of my apple account and signin back in I've reset all settings I've turned it off and on idk what else to do!!
I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
Today I discovered a new treasure of doggie poop in Lion. No Save As......
I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
I am starting to believe that Apple is Satan. -
Recently when opening up Photoshop, my Adobe CS6 Master Collection pops up saying there's some kind of offer going on the Creative Cloud. For awhile I was just able to close out of it and go about my business on Photoshop, but now it's not allowing me to open Photoshop unless I sign up/pay. I'm quite confused? I really NEED to have access to Photoshop ASAP.
Sign in, activation, or connection errors | CS5.5 and later
Mylenium -
ACS 5.3.40 is there patch available to support TLS 1.1 and 1.2 regarding SSL termination?
Hi,
We are trying to reduce our susceptibility to SSL BEAST information disclosure vulnerability regarding our ACS 5.3.40 system.
It's been suggested that we consider some defensive measures such as cipher suite selection.
Wherever possible, we should ensure that servers and clients that support TLS/SSL are configured to support TLS versions 1.1 and 1.2, not just SSLv3 and TLSv1.0 which is often the default configuration.
Can you advise how this is done within the ACS 5.3.40 application? Is it just a case of patching to another level?
(Default SSLv3 and TLSv1.0 defaults are not deemed strong enough).
Thanks.same Question~
I believe we come from the same university~
Tsinghua, isn't it? -
its almost 10 months,i purchased ipad2 32 3G wifi.itinially i got problem with applications and safari shut off frequently now since last 4 months my ipad starts with a message (connect iTunes)like first time start and going to restore mode and it occurs frequently.plz advise.
If you have followed the standard Apple troubleshooting processes (see user guide )
probably a trip to the local Apple Store Genius bar is called for before warranty runs out
Assuming the iPad has been released in your Country if not you may have to take it to a
neighbouring Country where it is available
This page will tell you ,via the drop down menu Countries that can support iPad
http://support.apple.com/kb/index?page=servicefaq&geo=United_Kingdom&product=ipa d -
When I had a PC I simply took the wire going to my monitor and connected to my big screen TV to watch Netflix movies...How do I take them from my IMAC and connect them to my TV now?
This could be problematic.
It will depend on what model of iMac you have.
You may want to post machine info.
blue apple > about this mac > more info button. Click on the hardware line. It has a little triangle in front of the work hardware.
Leave out the serial number.
Example:
Machine Name: iMac
Machine Model: PowerMac4,1
CPU Type: PowerPC 750 (33.11)
Number Of CPUs: 1
CPU Speed: 600 MHz
L2 Cache (per CPU): 256 KB
Memory: 768 MB
Bus Speed: 100 MHz
Boot ROM Version: 4.1.9f1
Most of the iMac's have sometype of video output port on the back. You will problably need a converter.
The 'hollywood' industry has been making it more difficult to get video out over time to prevent copying.
Robert -
i have an iphone 4 for verizon and i am going to switch phones and get a droid motorolla 4g phone and the droid doesnt have a sim card. does my iphone 4 have a sim card that i can put in the droid? can i buy sim cards separately online for the droid?
Brandon2184 wrote:
The iPhone 4 uses a "Nano SIM"
The CDMA iPhone 4 does not use a SIM at all. There is no SIM slot. It is a pure CDMA phone. -
I am going to buy a macbook pro for grade 12, and I need to know wheather I should get a macbook pro or a macbook pro retina. If someone could tell me (in a very simple way) which one is,better for me and why, I would be ever so apprreciative.
Why do you need a expensive MacBook Pro?
Your attending high school and unless everyone else is rich also your likely going to be a target by the more poorer students for theft or damage to the machine.
You could keep it home, but if you need it for class then your exposed again.
Also at that age your not very careful yet, a MacBook Pro is a expensive and easily damaged machine.
Unless your made of money and so are others at your school, I would recommned a low profile, just does the job cheap Windows PC.
If it dies, gets lost, stolen or damaged because of your inexperince handling senstivie electronics then it's no big deal.
You can buy a Mac later on when your sure you have a need for it, currently there isn't much advantage of owning a Mac compared to a PC, they do just about the same things now, one just looks prettier than the other.
Since 95% of the world uses Windows PC's your going to have to install Windows on the Mac in order to keep your skills up there or be unemployed, so it's a extra headache and expense.
good luck -
I have been using FF for the last 8 years. Starting from today of July the 16th 2011, I'm going back to IE and say goodbye to FF as long as I'm still getting 20 to 25 plugin containers in my Windows task manager.
I have the "techie" answer for all of you. According to the tier 2 support at Norton Help Desk, the latest live update from Norton "utilizes Visual Studio 2012 which enables SSE2 instructions" and my processor can not handle that.
He said they are "working on a solution" and offered to reply back on Wednesday / Thursday this week if a solution could be found...
Maybe you are looking for
-
Revolve 810 G1 Unlock Computer when in Tablet Mode. Press CTRL-ALT-DEL or Windows Security Button
1. I have an Revolve 810 G1 Running Windows 7 Pro (64 Bit). When I change the screen to Tablet Mode (Folding tablet over keyboard and using as tablet). I lock my computer. 2. What to know how to unlock without having to Open back up and use
-
PL/SQL - Using a variable as a table name
I have a procedure like this - PROCEDURE insert_food IS BEGIN INSERT INTO food_table SELECT * FROM fruit_table; END insert_food; So this proceudre would insert all the records in the 'fruit_table' into the 'food_table'. Would there be any way to stor
-
Hi, The scenario is, The Characteristic Name is a 0-unbounded field, If the Characteristic Name endsWith u201CSTATEu201D, Then, We have to check the Characteristic Value, if it is u201CFreshu201D, u201CFrozenu201D or u201CDryu201D, Accordingly we hav
-
Save Table in XML Automatically
Hello, I need your help... I want to get in a oracle db one table in xml format. I saw that we have a ORACLE XML DB package, where I can run "select" to obtain tables in xml. What I wan to do now, it is to save the result in a windows folder automati
-
Hi: Iam unable to create a database using Database configuration assistant. getting error "TNSNAMES OPERATION TIME OUT".... Iam using Oracle 9i... Can anyone help me in solving this issue?... One more thing I need is How to create a Database manually