11.1.1.3 supports SQL Server 2005 service pack2

Hi,
just i want know 11.1.13 supports which version of sql server and i am using sql 2005 service pack2 .
And one more thing while configure the all components actually how many databases i need to create in sql server i mean for shared services,reporting services,HFM and planning,please give me best clarification totally how many databases i need to create and configure.
Appreciate your help.
Thanks
Ram

JohnGoodwin wrote:
Hi,
Yes it is supported, try reading :- http://www.oracle.com/technology/products/bi/pdf/hyperion-supported-platforms/oracle_hyperion_epm_system_certification_release_11.1.1.3.0.xls
For databases, have a read here :- http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install_start_here/ch05s01.html
Ok?
Cheers
John
http://john-goodwin.blogspot.com/
Besides SQL Server 2005, what about support of SQL Server 2008?
Cheers!

Similar Messages

Transact-SQL debugger not working in SQL Server 2008: "...debugger does not support SQL Server 2005 or earlier..."

I have recently installed SQL Server 2008. When I try to execute a query against an Access database, I receive this debugging error:
"Unable to start Transact-SQL debugger. The Transact-SQL debugger does not support SQL Server 2005 or earlier versions of SQL Server. (SQLEditors)"
Nor will the query execute; I get a transport-level error 0. Any thoughts?

Hi Davidmhjr,
>>Unable to start the Transact-SQL Debugger. The Transact-SQL Debugger does not support SQL Server 2005 or earlier versions of SQL Server. (SQLEditors).
Have you tried to restart the server once you have installed SQL Server 2008? As Naomi N mentioned please check the version of SQL Server you are using.
If you tried to connect to SQL Server 2005 from SQL Server 2008 SSMS, you would not be able to debug and get this error, it happens because T-SQL debugger includes both server-side and client-side components. The server-side debugger components are installed
with each instance of the SQL Server 2008 Database Engine. The client-side components are installed when you install the SQL Server 2008 client-side tools.
So it works with SQL Server 2008 only so far. Another way is you can triy to use SQL Server 2005 SSMS to connect to SQL Server 2005.
More information about configuration requirement to run T-SQL debugger as below, please refer:
There are no configuration requirements to run the Transact-SQL debugger when SQL Server Management Studio is running on the same computer as the instance of the SQL Server Database Engine. However, to run the Transact-SQL debugger when SQL Server Management
Studio is running on a different computer from the instance of the Database Engine, you must enable program and port exceptions by using the Windows Firewall Control Panel application on both computers.
On the computer that is running the instance of the Database Engine, in Windows Firewall, specify the following information:
•Add TCP port 135 to the exceptions list.
•Add the program sqlservr.exe to the exceptions list. By default, sqlservr.exe is installed in C:\Program Files\Microsoft SQL Server\MSSQL10.InstanceName\MSSQL\Binn, where InstanceName is MSSQLSERVER for the default instance, and the instance name for
any named instance.
•If the domain policy requires network communications to be done through IPsec, you must also add UDP port 4500 and UDP port 500 to the exception list.
On the computer that is running SQL Server Management Studio, in Windows Firewall, specify the following information:
•Add TCP port 135 to the exceptions list.
•Add program ssms.exe (SQL Server Management Studio) to the exceptions list. By default, ssms.exe is installed in C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE.
Hope it is helpful.
Regards, Amber zhang

MS SQL Server 2005 Service Pack 1

Hello,
Does anyone know if SAP Business One SP1 PL4 is compatible with the newly available SQL Server 2005 SP1?
thanks,
Grace

Hi All,
I am running SQL 2005 SP1 with SBO without any problems. I am not sure if it is supported. SP1 for SQL solves a major memory problem that they had before SP1.
Our local SAP guys says that SQL 2005 is only supported on SBO 2005 SP1.
Hope it helps,
Adele

Upgrade process for SQL server 2005 service pack4 on stand alone and cluster servers

Hi All,
We have iniated a process of upgarding sp4 for all sql 2005 stand alone and clusters servers.
Please provide me the step by step process for installing sp4 and roll back paln for sql 2005 servers.And before proceeding with sp installation what are the pre check/pro active things that we need to take care.
Maheshwar Reddy

Hello,
For applying SP to SQL 2005 cluster environment/standalone please refer to below link
http://www.sqlcoffee.com/Tips0007.htm
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

BO XI R2 and SQL server 2005 Analysis services

Post Author: fasttrack
CA Forum: Olap
Hello,
I am new in BO, I am using XI R2 and I would like to know this:
I have to build some reports on Data Warehouse using SQL server 2005 Analysis Services.
My question is:
1) How I have to build this reports: directly to data warehouse or building an OLAP (CUBE) in analysis services 2005?
2) BO XI R2 supports SQL server 2005 and especially in this case Analysis services 2005 and provider (I have seen only provider for SQL Server 2000)?
Do you some good resources where to learn how to make reports on DW SQL server 2005?
Thank

Post Author: ShaunOberem
CA Forum: Olap
Hello,
I am new in BO, I am using XI R2 and I would like to know this:
I have to build some reports on Data Warehouse using SQL server 2005 Analysis Services.
My question is:
1) How I have to build this reports: directly to data warehouse or building an OLAP (CUBE) in analysis services 2005?
2) BO XI R2 supports SQL server 2005 and especially in this case Analysis services 2005 and provider (I have seen only provider for SQL Server 2000)?
Do you some good resources where to learn how to make reports on DW SQL server 2005?
Thank
Hi,
If you are trying to create a new OLAP Intelligence Report using SQL 05 I am afraid you are out of luck.
You will need to get a copy of the Productivity Pack (Available for Download in Subscribenet) .
Also, in your SQL Server Sufrace Configuraiton manager try setting Analysis Services to Allow Ananomous connections. This will make sure you get a little further initially. (Dont leave Anonymous on)

HotFix4 for SQL Server 2005 doesn't work

I am having problems getting a machine running SQL Server 2008 R2 (Express) to connect to a SQL Server 2005 (Full Standard Edition) DB on another machine via the LAN. It times out when connecting from a C# application. SSMS on the SQL 2008 machine
connects fine, but SSMS on the 2005 machine (connecting to a copy of the same DB on the 2008 machine) says it isn't supported and I need a hotfix.
I downloaded the hotfix link from Microsoft, but when I paste it into the Browser I get a DNS name failure for the Hotfix4 server. I don't want to paste the full link here because it is not made public by MS and you need to request it. However, the
first part of the URL is: http://hotfix4.microsoft.com/SQL%20Server%202005...etc.
I have checked out all of the obvious things in both instances (2005 AND 2008)... Both instances are configured to accept remote connections, both have TCP/IP and named pipes protocols enabled, both are running fine for local connections, both have the SQL
Browser enabled and the Computer Browser Service running on the network.
As the hot fix doesn't install, I am kind of out of ideas.
Any suggestions?
Thanks,
Pete
I used to write COBOL... now I can do anything.

SQL 2005 is out of
mainstream support:
SQL Server
2005
SP4
04/12/2011
04/12/2016
Technical support continues till 04/12/2016, yet mainstream (hotfix) support ends as of 04/12/2011; options
for hotfix support after 04/12/2011:
ð  Continue
with self-help
ð  Upgrade
to the latest supported service pack for SQL Server 2005 or SQL Server 2008 or SQL Server 2008 R2
ð  Extended
hotfix support agreement
SP4 and CU3 are still available for download, if this helps...
http://support.microsoft.com/kb/2507769
http://www.microsoft.com/en-US/download/details.aspx?id=7218
But you should update your SQL-Server..... SQL 2014 is the latest version

Integrate Oracle IDM with Sql Server 2005

Hi Guys,
We maintain the employees information in Oracle IDM and we want to integrate Oracle IDM with Sql server 2005.
how we can this.

The DB connector?
The 9.0.1.4 version supports SQL server 2005.
The latest version of the GTC db connector might also work.
Best regards
/Martin

TopLink with SQL Server 2005

Could someone help answer this question:
Has TopLink 10.1.3.x been certified to support SQL Server 2005?
I appreciate your information.
Haiwei

It is certified on SQL Server 2000.
I know some customers are using it with SQL Server 2005, though.

I plan to upgrade the SSRS 2005 SP2 enterprise edition in our internal web server to 2005 SP4, the Reporting server database is hosted in another sql server in sql server 2005 SP4. Do I need to do anything on the reporting server database side?

My question is what the steps do I need to take to upgrade SSRS from 2005 SP2 to SP4. The web server that host the SSRS is in 2005 SP2, and the OS is in window 2003.
Our SSRS report server and report server database are in different servers. The SSRS in the web server is in 2005 SP2 enterprise edition, the report server database is in sql server 2005 SP4 enterprise edition.
To upgrade the SSRS in web server from 2005 sp2 to sp4, do I need to backup/restore the encryption key? Nothing will be changed in the report server database. We will still pointing to the same database in the current server, all
I wanted to do is performing a inplace upgrade of SSRS from 2005 SP2 to SP4.
Any response will be greate appreciated. Thank you!
Li-hui Chen

Hi Lihui Chen,
According to your description, you want to install the Services Pack 4 for SQL Server. Right?
In SQL Server, Services Packs are used for fixing issues of current version product. It's not an Upgrade, you don't have to backup/restore your encryption key. You just need to download the Service Pack 4 on:
Microsoft SQL Server 2005 Service Pack 4 RTM . Please make sure you have administrative rights on the computer to install SQL Server 2005 SP4. For more information, see links below:
How to obtain the latest service pack for SQL Server 2005
List of the issues that are fixed in SQL Server 2005 Service Pack 4
SQL Server 2005 SP4, KBA 2463332, Installation Issues
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

SQL Server Reporting Services FAQ

Hi All,
This thread is a summary of the Frequently Asked Questions on SQL Server Reporting Services. We consolidate them and post here for your reference. If you have any further questions, please kindly start a new thread so that more community members, MVPs, and MSFTs can join the discussion and share their ideas. Thanks for your understanding.
Part I: SQL Server Reporting Services General Topics
1. How to migrate SQL Server 2008 Reporting Services to another computer?
2. How to combine connecting string via parameter?
3. How to install a 32-bit version of SQL Server 2005 Reporting Services on a computer that is running a 64-bit version of Windows?
4. Error of EXECUTE permission denied on object 'xp_sqlagent_notify'.
5. Security consideration for anonymous access to Report Server.
6. How to create a custom report template in Reporting Services?
7. Does Reporting Services support horizontal tables which have fixed rows and dynamic columns?
8. How to reset the page number back to 1 every time the report gets a group break?
9. How to open the drill- through report in a new browser window?
10. How to verify the version of SQL Server?
11. How to use multiple datasets?
12. How to upgrade report from SQL Server 2000 to SQL Server 2005?
13. Out of memory error when exporting reports to Excel.
14. How to improve PDF quality of the report exported in Reporting Services 2005?
15. How to enable the Select All option for a multi-value parameter?
Part II: SQL Server Reporting Services SharePoint Integrated Mode Topics
1. How to deploy reports to SQL Server Reporting Services in SharePoint Services integrated mode?
2. How to integrate SQL Server Reporting Services and SharePoint Services?
3. How to refer the reports on the Report Server in SharePoint Services?
4. How to manage user to view reports in SharePoint integrated mode?
5. What information is needed when posting questions regarding SharePoint integrated mode?
6. Is Report Builder available in SharePoint Integrated Mode?
PLEASE NOTE: Microsoft does not offer formal support for the communities you'll find here. Instead, our role is to provide a platform for people who want to take advantage of the global community of Microsoft customers and product experts. Microsoft may monitor content to ensure the accuracy of the information you'll find, but any information provided by Microsoft staff is offered "AS IS" with no warranties, and no rights are conferred. You assume all risk for your use.
Microsoft Online Community Support

1.        Question 3: How to install a 32-bit version of SQL Server 2005 Reporting Services on a computer that is running a 64-bit version of Windows?
Answer:
To install the 32-bit version of Reporting Services on a computer that is running the 64-bit version of IIS 6.0, we can follow these following steps:
1.       Uninstall the 64-bit version of Reporting Services.
Note: Side-by-side installations of 32-bit versions of Reporting Services and 64-bit versions of Reporting Services are not supported.
2.       Run the Dotnetfx64.exe file to manually install the .NET Framework.
The Dotnetfx64.exe file is in the Tools\redist\2.0 folder on the SQL Server 2005 Setup media. To download the Dotnetfx64.exe file, visit the following Microsoft Web site:
http://go.microsoft.com/fwlink/?LinkId=70186
3.       In IIS Manager, click Web Server Extensions.
4.       In the Details pane, right-click ASP.NET V2.0.50727, and then click Allow.
5.       Right-click Web Sites, and then click Properties.
6.       Click the ISAPI Filters tab.
7.       In the Filter Name column, click ASP.NET_2.0.50727, and then click Edit.
8.       Replace C:\WINDOWS\Microsoft.NET\Framework64\v2.0.50727\aspnet_filter.dll with C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\aspnet_filter.dll.
Note: The Aspnet_filter.dll file in the C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ folder is a 32-bit version of the file.
9.       Click OK two times, and then close IIS Manager.
10.   At a command prompt, run the following command:
cscript %SystemDrive%\inetpub\AdminScripts\adsutil.vbs set w3svc/AppPools/Enable32bitAppOnWin64 1
11.   Install the 32-bit version of Reporting Services.
12.   After setup is complete, open IIS Manager, and then click Web Server Extensions.
13.   In the Details pane, right-click ASP.NET V2.0.50727 (32-bit), and then click Allow.
To install the 32-bit version of Reporting Services on a computer that is running the 64-bit version of IIS 7.0, follow these steps:
1.       Enable ASP.NET and IIS before you install Reporting Services.
2.       Open a command prompt. To do this, click Start, point to All Programs, point to Accessories, right-click Command Prompt, and then click Run as administrator.
3.       In the User Account Control dialog box, click Continue.
4.       Copy the following script:
cscript %SystemDrive%\inetpub\AdminScripts\adsutil.vbs set w3svc/AppPools/Enable32bitAppOnWin64 1
5.       In the upper-left corner of the Command Prompt window, right-click the command prompt icon, click Edit, and then click Paste.
6.       Press ENTER to run the script.
7.       Install the 32-bit version of Reporting Services. You must apply SQL Server 2005 Service Pack 2 (SP2) after you install Reporting Services in Windows Vista. If you install SQL Server 2005 Express Edition with Advanced Services, you can run SQL Server 2005 Express Edition with Advanced Services SP2.
For more information, visit the following Microsoft Web site:
Microsoft SQL Server 2005 Express Edition with Advanced Services Service Pack 2
http://go.microsoft.com/fwlink/?LinkID=63922
8.       Reset IIS.
9.       Configure the report server for local administration. To access the report server and Report Manager locally, follow these steps:
a.       Start Microsoft Internet Explorer.
b.      On the Tools menu, click Internet Options.
c.       Click Security.
d.      Click Trusted Sites.
e.      Click Sites.
f.        Under Add this website to the zone, type http://servername.
g.       If you are not using HTTPS for the default site, click to clear the Require server certification (https:) for all sites in this zone check box.
h.      Click Add.
i.         Repeat steps f and g to add http://localhost, and then click Close.
10.   This step lets you start Internet Explorer either to localhost or to the network computer name of the server for both Report Server and Report Manager.
a.       Create role assignments that explicitly grant you full-permissions access. To do this, follow these steps:
b.      Start Internet Explorer by using the Run as administrator option. To do this, click Start, click All Programs, right-click Internet Explorer, and then click Run as administrator.
c.       Start Report Manager.
d.      Note By default, the Report Manager URL is http://servername/reports. If you are using SQL Server 2005 Express Edition with Advanced Services SP2, the Report Manager URL is http://servername/reports$sqlexpress. If you are using a named instance of Reporting Services, the Report Manager URL is http://servername/reports$InstanceName
e.      On the Home page, click Properties.
f.        Click New Role Assignment.
g.       Type a Windows user account in the following format: domain\user
h.      Click to select the Content Manager check box.
i.         Click OK.
j.        In the upper-right corner of the Home page, click Site Settings.
k.       Click Configure site-wide security.
l.         Click New Role Assignment.
m.    Type a Windows user account in the following format: domain\user
n.      Click to select the System Administrator check box.
o.      Click OK.
p.      Close Report Manager.
11.   Open Report Manager in Internet Explorer without using the Run as administrator option.
Microsoft Online Community Support

Sender JDBC support the stored procedure in SQL Server 2005

Dear All,
My question here is , Sender is JDBC adpter support to call the Stored procedure in Microsoft SQL Server 2005?
I followed the below thread before posting this question
Sender JDBC Adapter Supports Stored Procedures????
In the thread Suraj response has mentioned SAP note: 941317, I checked the note, Note says it supported only ORACLE DBMS versions.
Could you please clarify about this to possibility to call the stored procedure in Microsoft SQL server 2005?
Thank you in Advance
Sateesh

Hi Sateesh,
To answer your query, Yes it does. SP call works with SQL Server 2005 as well, the SP call should be "execute SPNAME <paramas>". In the place of update statement put any junk value as mentioned in the earlier comment.
But just one thing to be noted, the select or any other query returning the desired resultset must be the first statement in youre SP returning value to the calling app. Means if there are any update, deletion or intermediate select queries to be used with in your SP, those all should be placed after the Main Select query that returns the desired resultset. Variable declarions and assignments are allowed.
But if the seq of statements in your SP are like:
@var1 Varchar
Update <tablename>....
Select * from <tablename>
Then the output of the SP is :
1 row updated
<the resultset from select>
In such cases, PI can recognise the first value returned only, that is "1 row updated" and hence the returned resultset wouldn't be seen by PI or not be passed to integration engine. Hence the update should come after the main Select.
One more interesting piece of information, even if you copy and paste the entire SP code in place of the query string of Sender JDBC adapter, that too will work with all your variable declarations, multiple queries and updates and everything. Just have to follow the above rule.
Let us know what you find.
Regards,
Suddhasatta

Restoring a SQL Server 2005 DB to a SQL Server 2014 install, is there any way to prevent it from being upgraded

Does anyone know if there is a flag I can use to prevent a SQL Server 2005 database from being upgraded to SQL 2014 when it is restored to a 2014 instance?
Don't ask why, I just need to know if this is possible or if 2005/8 DB's are required to be upgraded if they are going to run on SQL 2012/2014 instances. The documentation seems to say this is so, I just want to verify that.

First: You cannot directly restore a 2005 database to
2014. MS supports migration over 3 SQL Server version steps; means you can restore 2005 to 2008/2008R2/2012, but not to 2014. You have to do a migration step between.
Olaf I was looking for this today, because I'm working with a new customer that have SQL 2005 and I have SQL 2014. And needed to restore a backup form the production server in my test server.
When I read what you write I think, oh no!! I have to install SQL 2012 in my server. But that it's not an option for me, and I say let me try to restore the DB first in 2014 and if not work install 2012.
You can restore a 2005 database to 2014 directly, and it works.
For reference the version number in the servers 2005 (9.0.4035 SP3) and 2014 (12.0.2000 RTM)
This is not related in any way to the original question that you answered (the file format will be upgraded to the new motor, that is sure).
I put this lines because in the future there will be some people searching about if possible to restore a 2005 DB to 2014, and like me will read your lines and think it's not possible and that can make a decision to buy 2012 and not 2014 to that new server they
will migrate.
Don't forget to mark the best replies as answers!

SAP and Database Encrption on SQL Server 2005 or 2008

Hi. I searched as best I could for any existing threads on this topic, and could not find any, so I hope it's OK to raise a new one.
We're running SAP ECC 6.0 on a SQL 2005 database. Database size is around 3.3 TB, with Trans Log of about 550GB, storage is HP EVA.
I've been asked to report on how Database Encryption would impact our systems, both from the perspective of enabling it initially and then how it would affect performance going forward.
I've read a few White Papers, for example:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4ab89e84-0d01-0010-cda2-82ddc3548c65?QuickLink=index&overridelayout=true
.. and from what I'm reading, it looks like I would want to be moving to SQL Server 2008 as a first step. Does anyone have any experience of implementing SQL encryption for a SAP database, either in 2K5 or 2K8?
All comments or help will be welcomed.
Thanks
Steven Clark

Hello Steven,
You can also check the following websites:
http://blogs.msdn.com/b/saponsqlserver/archive/2011/09/05/decreased-disk-space-requirement-for-sap-unicode-systems.aspx
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50c5de8f-282a-2e10-cb8a-a5859a0994a4&overridelayout=true
And, SAP notes:
[1581700 PAGE compression support for DDIC & Hom./Het. System Copy|http://service.sap.com/sap/support/notes/1581700]
[1488135 Database compression for SQL Server|http://service.sap.com/sap/support/notes/1488135]
Regards,
Eduardo Rezende

SharePoint Foundation 2010 supported sql server version?

Hi,
I am using SharePoint 2010 Foundation. I want to know what are all the SQL Server versions would support in SharePoint 2010 Foundation.
Could anyone tell me as soon as possible.
Thanks & Regards
Poomani Sankaran

It requires Windows Server 2008 SP2 or Windows Server 2008 R2. It will not run on a Server Core installation.
It requires one of these versions of x64 SQL Server:
                SQL Server 2005 SP3 CU3 (Build 4220) or greater (Note: SQL Server 2005 goes out of mainstream support in April 2011)
                SQL Server 2008 SP1 CU2 (Build 2714) or greater
                SQL Server 2008 R2
Check this blog
http://www.sqlservercentral.com/blogs/glennberry/2010/03/11/sharepoint-2010-and-various-versions-of-sql-server/
further from msdn
In order to maintain SharePoint and SQL Server compatibility we use the “SharePoint N-1
on SQL Server N+1” equation to determine version support. Using SharePoint Foundation 2010 as an example, the N release of SQL Server is 2008/2008 R2 and N+1 is SQL Server 2012. For Microsoft SharePoint Server 2013 the N release of SQL Server
is 2012 and the N+1 is SQL Server 2014.
https://technet.microsoft.com/en-us/library/cc288751(v=office.14).aspx

"Unable to load URL" - SQL Server 2005 DB Web Service Connection

Hi ,
I am using XCelsius version 5.0.0.99 to create dashboards connecting to SQL Server 2005.
Find below the details of the steps -
1. Created a web service within SQL Server 2005 database.
2. Copied the WSDL URL.
3. In XCelsius 2008 -> Data Manager -> Web Service Connection, pasted the URL in the WSDL URL input box and clicked "Import" to import the methods. At this point I am getting "Unable to load URL" .
Am I missing any step ?
Any suggestion would be highly appreciated.
Note : I have tested the web service by using it in a ASP.Net project and works fine.
Thanks
Chitra

Hi,
Error :unable to Load URL occurs" because Crystal xcelsius only support single schema web service created from Query as a web service and Flynet tool available in xcelsius 2008.
The reason:
All the web service create from Sql 2005 ,PHP script produced multiple scehma web service and crystal xcelsius only support single schema web service which can be created from Query as a web service or Flynet.
Please revert in case of any queries.
Regards
Kekti Fadnavis

11.1.1.3 supports SQL Server 2005 service pack2

Similar Messages

Maybe you are looking for