11.1.1.5 to 11.1.1.7(upgrading suggestions)

hj
Edited by: 991688 on Apr 24, 2013 4:33 PM

Hi Srini,
Thanks for the response, But the link which i provided explained with pictures, so just wanted to make sure, if that is correct, I can follow that. as it is clearly shown with pictures.
but from the links you have provided in your first response, i made these points, but I dont think these are clear.
OUT_PLACE
This is where we install the new version of a product in a new Middelware Homw ,and migrate all the metadata from the old installation to the new one. This has the virtue of simplicity, but if the current installation is heavily customized and have got lots of analyses, LDAP users ... ,Then it is preferable to upgrade current installation "in-place".
Because of the move to integrate OBIEE closer into Oracle Fusion Middleware ,the in-place upgrade process is actually a bit complex,and in Fusion Middleware terms is reffered to as "Applying the latest Oracle Fussion Middleware patchset.
Note:- We need to make sure ,we BACK-UP the existing system before attempting n upgrade.
*Applying the Latest Patch to Oracle WebCenter 11.1.1.5(In-Place)*
+Determine the OWSM policy URIs for Spaces and Discussions Web service end points, and if required, for portlet producers+
+Perform the general pre-patching tasks:+
+Review system requirement, certification and interoperability information+
+Stop the servers and processes+
+Back up your Middleware Home, Domain Home, and Oracle instances+
+Back up your database and database schemas+
+Back up additional configuration information+
+Patch Oracle WebLogic Server - specify what patch we are applying here+
+Rename the emCCR file for silent patching+
+Download the installer for WebCenter Portal and other required products+
+Download the WebCenter Portal installer, which is a full installer that also functions as an update installer. At this stage, if required, you can also download installers for other FMW products that you plan+
+to patch, such as Oracle WebCenter Content and Oracle SOA Suite. (http://docs.oracle.com/cd/E28280_01/doc.1111/e16793/patch_set_installer.htm#CBHDHGBE)+
+Note:- It depends some time , if already downloaded the product installers, then we can skip this step.+
+Run Patch Set Installer to patch the following Fusion Middleware products to the latest release:+
+Oracle Identity Management+
+Oracle Web Tier (Oracle HTTP Server)+
+Oracle Forms, Reports and Discoverer to release 11.1.1.7.0, and Oracle Portal to 11.1.1.6.0 - NOT USED+
+Patch these products before you patch Oracle WebCenter This Oracle Fusion Middleware patch set provides Oracle Portal 11.1.1.6.0, which is the+
+latest version of Oracle Portal. When you run the patch set, Oracle Portal is patched to release 11.1.1.6.0.+
+http://docs.oracle.com/cd/E28280_01/doc.1111/e16793/patch_set_installer.htm#CBHFDHJC+
+http://docs.oracle.com/cd/E28280_01/doc.1111/e16793/patch_set_installer.htm#BGBDGIAF+
+http://docs.oracle.com/cd/E28280_01/doc.1111/e16793/patch_set_installer.htm#CHDDBDAF+
+Run the WebCenter Portal installer to patch to Release 11.1.1.7.0+
+Run the WebCenter Portal 11.1.1.7.0 installer. While applying the patch set, specify your existing Oracle Middleware home and WebCenter Portal Oracle home locations.+
+http://docs.oracle.com/cd/E28280_01/doc.1111/e16793/patch_set_installer.htm#CBHFDHJC (no need to do this if already patched)+
+Patch the other required Fusion Middleware products+
+At this stage, you can patch other FMW products, such as Oracle WebCenter Content and Oracle SOA Suite, by running their product installers.Mandatory only for the products installed in the Middleware+
+home.http://docs.oracle.com/cd/E28280_01/doc.1111/e16793/patch_webcenter.htm#CHDFJAFC+
+Update the MDS, WEBCENTER, and ACTIVITIES schemas+
+Use the Patch Set Assistant to update your schemas.Before running Patch Set Assistant, you should check to make sure that your database is up and+
+running and that the schemas you want to upgrade are at the versions that are supported for upgrade.We need to check whether schemas of other+
+patched products need to be updated. you can update all the required schemas at this stage. we can skip this step if we have already patched+
+schemas as listed here http://docs.oracle.com/cd/E28280_01/doc.1111/e16793/patch_set_assistant.htm#CHDCCJHF+
+http://docs.oracle.com/cd/E28280_01/doc.1111/e16793/patch_set_assistant.htm#BABEBGEJ+
+Perform the following post-patching tasks for WebCenter Portal:+
+Attach security policy to Web service end points of Spaces and Discussions, and if applicable, portlet producers+
+Extend the domain using the Pagelet Producer upgrade template+
+Update SSO and OHS configuration for Pagelet Producer, Portlet Producer applications, and Oracle SES+
+Configure group space workflows+
+Upgrade Process Space+
+You must restore your previous security policy configuration. If any custom portlet producers are deployed, attach the security policies to their+
+Web service end points.If group space workflows, SSO, and OHS are configured, it is mandatory to reconfigure them after patching your instance.It+
+is optional, but recommended, to upgrade Pagelet Producer and Process Spaces.+
+http://docs.oracle.com/cd/E28280_01/doc.1111/e16793/patch_webcenter.htm#CHDCJGED+
+http://docs.oracle.com/cd/E28280_01/doc.1111/e16793/patch_webcenter.htm#CHDHBFDE+
+http://docs.oracle.com/cd/E28280_01/doc.1111/e16793/patch_webcenter.htm#CHDIDFEE+
+http://docs.oracle.com/cd/E28280_01/doc.1111/e16793/patch_webcenter.htm#CHDHEEHB+
+http://docs.oracle.com/cd/E28280_01/doc.1111/e16793/patch_webcenter.htm#CHDIBHHE+
+Perform post-patching tasks for the required Fusion Middleware products.+
+For all the Fusion Middleware products that you patched to Release 11.1.1.7.0, perform the required post-patching tasks.+
+http://docs.oracle.com/cd/E28280_01/doc.1111/e16793/post_patch.htm#BABJAGII+
+Start the servers and processes+
+Start your Oracle Fusion Middleware environment. This involves starting your Oracle WebLogic Server Administration Server, managed servers, node manager, OPMN and all system components.+
+http://docs.oracle.com/cd/E28280_01/doc.1111/e16793/patch_set_installer.htm#CHDEEIBJ+
+Verify Oracle WebCenter Portal 11.1.1.7.0 installation+
+Verify your patched WebCenter Portal instance by trying to access various URLs like for Administration Server and Oracle WebCenter Portal: Spaces.+
+http://docs.oracle.com/cd/E28280_01/install.1111/e12001/config.htm#INSWC1176"+
This is what i am thinking the steps from your first responses.
Can you please clear me in this,+_
is the link with pictures correct or not.+_
is the above steps I provided are correct or not.+_
Thanks a lot for the response
Thanks,
Venk
Edited by: 991688 on Apr 11, 2013 9:50 AM

Similar Messages

  • Problem with Threads and "plase wait..."-Window

    Hi everyone,
    I have a problem that I'm not able to solve in any way... I have a time-consuming task (a file decryption) which I execute in a separate thread; I've used the SwingWorker class, like suggested by sun-tutorial, and it works right. The problem is that I have to wait that the decryption have finished before continuing with program-execution. Therefore I would like to display a "please wait"-window while the task runs. I've tryed all the possible ways I know but the problem is always the same: the waitWindow is displayed empty, the bounds are painted but the contents no; it's only painted when the decrypt-task has finished. Please help me, I have no more resources....
    decrypt-file code:
    public class DecryptFile {
      private String cryptedFileNameAndPath;
      private ByteArrayInputStream resultStream = null;
      // need for progress
      private int lengthOfTask;
      private int current = -1;
      private String statMessage;
      public DecryptFile(String encZipFileNameAndPath) {
        cryptedFileNameAndPath = encZipFileNameAndPath;
        //Compute length of task...
        // 0 for indeterminate
        lengthOfTask = 0;
      public ByteArrayInputStream getDecryptedInputStream() {
        return this.resultStream;
       * Called from ProgressBarDemo to start the task.
      public void go() {
        current = -1;
        final SwingWorker worker = new SwingWorker() {
          public Object construct() {
            return new ActualTask();
        worker.start();
       * Called from ProgressBarDemo to find out how much work needs
       * to be done.
      public int getLengthOfTask() {
        return lengthOfTask;
       * Called from ProgressBarDemo to find out how much has been done.
      public int getCurrent() {
        return current;
      public void stop() {
        current = lengthOfTask;
       * Called from ProgressBarDemo to find out if the task has completed.
      public boolean done() {
        if (current >= lengthOfTask)
          return true;
        else
          return false;
      public String getMessage() {
        return statMessage;
       * The actual long running task.  This runs in a SwingWorker thread.
      class ActualTask {
        ActualTask () {
          current = -1;
          statMessage = "";
          resultStream = AIUtil.getInputStreamFromEncZip(cryptedFileNameAndPath); //here the decryption happens
          current = 0;
          statMessage = "";
      }The code that calls decryption and displays waitWindow
          final WaitSplash wS = new WaitSplash("Please wait...");
          final DecryptFile cryptedTemplate = new DecryptFile (this.templateFile);
          cryptedTemplate.go();
          while (! cryptedTemplate.done()) {
            try {
              wait();
            } catch (Exception e) { }
          this.templateInputStream = cryptedTemplate.getDecryptedInputStream();
          wS.close();Thanks, thanks, thanks in advance!
    Edoardo

    Maybe you can try setting the priority of the long-running thread to be lower? so that the UI will be more responsive...

  • Mixing memory modules on Westmere

    Dear Hardware gurus,
    I have a 12-Cores Westmere. Do you know is it possible to mix different memory modules on it, namely:
    6x1 Gb 1330Mhz
    +
    2x4 Gb 1066Mhz
    and if yes, in which configuration?
    Thanks a lot for any comment!

    Kappy, thanks for the note.
    I am actually going to order some more 1333 modules, but just for the short time I have to work with what I have currently (see my original post).
    As I posted above, I tried a bit already to combine the modules and Mac doesn't boot
    Can you suggest a configuration, which will work?

  • Pension issue Mid Month Leaving

    Dear All,
    As per rule sustem should deduct mid month joining/leaving/absences or transfer scenarios, the Pension/PF Basis will be correspondingly prorated. But our system is not doing this. In RT table i have found 3FC Pension Basis for Er c 01/2010                    0.00           6,500.00.
    Employee leaving date is 14.04.2010. system is picking pension amout as 541. Last year it was coming right.
    Please suggest.
    Ashwani

    Dear Jayanti,
    We required prorata basis pension in case of left employees and system is not doing this. This is the issue. As per our PF experts Pension amount should come on prorata basis for left employees in case they left mid of month.System is doing prorata basis last year but from this year it is deducting 541. I am giving two RT cases of different years.
    RT table for year 2010. DOL 26.04.2010
    /111 EPF Basis              01/2010                    0.00           8,750.00 
    /139 VPF Basis              01/2010                    0.00           8,750.00 
    /3F1 Ee PF contribution     01/2010                    0.00           1,050.00 
    /3F3 Er PF contribution     01/2010                    0.00             509.00 
    /3F5 Ee Mon PF contribution 01/2010                    0.00           1,050.00 
    /3F6 Ee Ann PF contribution 01/2010                    0.00          12,600.00 
    /3F9 PF adm chrgs * 1,00,00 01/2010                    0.00              96.25 
    /3FA PF basis for Ee contri 01/2010                    0.00           8,750.00 
    /3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00 
    /3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00 
    /3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00 
    /3F4 Er Pension contributio 01/2010                    0.00             541.00
    /3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
    /3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00
    /3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
    /3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00
    /3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00
    /3R3 Metro HRA Basis Amount 01/2010                    0.00           8,750.00
    1BAS Basic Salary           01/2010                    0.00           8,750.00
    RT table for year 2009. DOL 27.10.2009
                                                                                    /111 EPF Basis              07/2009                    0.00           9,016.13
    /139 VPF Basis              07/2009                    0.00           9,016.13
    /3F1 Ee PF contribution     07/2009                    0.00           1,082.00
    /3F3 Er PF contribution     07/2009                    0.00             628.00
    /3F5 Ee Mon PF contribution 07/2009                    0.00           1,082.00
    /3F6 Ee Ann PF contribution 07/2009                    0.00           8,822.00
    /3F9 PF adm chrgs * 1,00,00 07/2009                    0.00              99.18
    /3FA PF basis for Ee contri 07/2009                    0.00           9,016.00
    /3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00
    /3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00
    /3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00
    /3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00 
    /3FC Pension Basis for Er c 07/2009                    0.00           5,452.00 
    /3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00 
    /3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00 
    /3R4 Non-metro HRA Basis Am 07/2009                    0.00           9,016.13 
    1BAS Basic Salary           07/2009                    0.00           9,016.13 
    Now please suggest what to do. where is the problem  ? If have also checked EXIT_HINCALC0_002 but nothing written in it.
    With Regards
    Ashwani

  • Eclipse Community Forums

    Hi,
    I have a problem using Xtext generated ecore files in both Eclipse and standalone Java. In a nutshell, Xtext generates relative ecore references which work fine in Eclipse for platform:/resource URIs which make it seem like all projects are siblings of each other, but break when loading resources via absolute file:/ URIs when projects are not physically situated in the same directory.
    For example, I have a few Xtext languages that import each other and refer to each other's elements. Xtext generates ecore files for these languages, and they wind up having relative references to each other. I have a com.mecha1.atom.model.query Xtext project whose language generates an AtomQuery.ecore with references to an imported AtomType.ecore that look like this:
    Quote:
    eType="ecore:EClass ../../../../../../../com.mecha1.atom.model.type/src/com/mecha1/atom/model/type/AtomType.ecore#//EntityDecl"
    This works ok in Eclipse because the actual absolute URIs are platform:/resource based and all of the workspace projects are directly referenced via platform:/resource/<project>:
    Quote:
    platform:/resource/com.mecha1.atom.model.query/src-gen/com/mecha1/atom/model/query/AtomQuery.ecore
    platform:/resource/com.mecha1.atom.model.type/src/com/mecha1/atom/model/type/AtomType.ecore
    However on the filesystem these projects exist in different subdirectories:
    Quote:
    file:/Users/esp/Code/mecha1/Atom/atom/data/com.mecha1.atom.model.query/bin/com/mecha1/atom/model/query/AtomQuery.ecore
    file:/Users/esp/Code/mecha1/Atom/atom/core/com.mecha1.atom.model.type/bin/com/mecha1/atom/model/type/AtomType.ecore
    So when the relative path is used to navigate from one ecore model to the other they do not resolve correctly. The relative URIs will also break if resources are loaded from archive:/ URIs e.g. when loaded from classpath bundles via org.eclipse.xtext.mwe.Reader.
    Is there a strategy deal with this? For instance, is there a way to force Xtext to generate absolute URIs for cross references? Then at least I could use the EMF URI map to remap things depending on what context the models are being loaded in.
    Thanks,
    Edwin

    Edwin,
    Comments below.
    On 12/10/2012 9:09 AM, Edwin Park wrote:
    > Hi Ed,
    >
    > Thanks, this helped to put me on the right track.
    >
    > I also moved my ecore/genmodel files into a non-source 'model'
    > directory in my plugin according to your suggestion. This avoids the
    > files being duplicated in the bin dir as you said, but when I take
    > them out of the classpath like this, I can no longer reference them in
    > the Xtext editor.
    Yes, because it doesn't index them until they commit this patch I provided:
    https://bugs.eclipse.org/bugs/show_bug.cgi?id=390411
    >
    > For example, I modified the default mydsl sample to include a
    > reference to an EClass in the greeting:
    >
    >
    > grammar org.xtext.example.mydsl.MyDsl with
    > org.eclipse.xtext.common.Terminals
    >
    > generate myDsl "http://www.xtext.org/example/mydsl/MyDsl"
    >
    > import "http://www.eclipse.org/emf/2002/Ecore" as ecore
    >
    > Model:
    > greetings+=Greeting*;
    >
    > Greeting:
    > 'Hello' eClass=[ecore::EClass|QualifiedName] '!';
    >
    > QualifiedName:
    > ID ('.' ID)*;
    >
    >
    > And I have a plugin com.mecha1.atom.mysql that looks like this:
    >
    > com.mecha1.atom.mysql/model/mysqlConfig.ecore
    > com.mecha1.atom.mysql/model/MysqlConfig.genmodel
    >
    > com.mecha1.atom.mysql/plugin.xml:
    >
    > <?xml version="1.0" encoding="UTF-8"?>
    > <?eclipse version="3.0"?>
    >
    > <!--
    > -->
    >
    > <plugin>
    >
    > <extension point="org.eclipse.emf.ecore.generated_package">
    > <package
    > uri="http://www.mecha1.com/atom/mysql/MysqlConfig"
    > class="com.mecha1.atom.mysql.mysqlConfig.MysqlConfigPackage"
    > genModel="model/MysqlConfig.genmodel"/>
    > </extension>
    >
    > </plugin>
    >
    >
    > com.mecha1.atom.mysql/build.properties:
    >
    > #
    >
    > bin.includes = .,\
    > META-INF/,\
    > plugin.xml,\
    > plugin.properties,\
    > model/
    > jars.compile.order = .
    > source.. = src/,\
    > src-gen/,\
    > xtend-gen/
    > output.. = bin/
    >
    >
    > When I launch a hosted Eclipse and create a .mydsl file in a plug-in
    > project with the com.mecha1.atom.mydsl plugin specified as a
    > dependency, the content assist for the eClass attribute does not show
    > anything. However if the ecore files are in the classpath of the
    > dependency plugin, the content assist will show them.
    Yes, that's the bug I referred to.
    >
    > Another thing I noticed is that if I include the org.eclipse.emf.ecore
    > plugin, the Xtext content assist will correctly show the contents of
    > the Ecore.ecore, which is also in a model directory in the plugin.
    But it's an actual deployed bundle so it's actually on the classpath but
    the PDE doesn't properly put the model folder on the classpath, only the
    bin folder.
    > Is there something else I need to do to get Xtext to recognize the
    > ecore file for cross reference scoping/content assist if the ecore is
    > not in the classpath?
    >
    > Thanks,
    > Edwin
    >
    >

  • Cannot open and update IPhoto after upgrading to OXYosemite

    From the App store, I downloaded and installed OXYosemite. There are 2 more updates available: iPhoto and iMovie. When I try to upload them, the notice I get is "Update Unavailable with This Apple ID  This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
    I have 2 apple IDs when I inquire about my ids. Signing in App Store with either of them, doesn't resolve the problem. I get the same notice. iTunes, Mac, mobile downloads, all use the same apple IP, only for the computer downloads from App Store isn't working.
    What should I do?
    Thanks, Sev

    I have the same problem and can't find out how to correct it.  Unable to update iPhoto or iMovie .. I get the same message as above user.  Help!

  • MB5B Report table for Open and Closing stock on date wise

    Hi Frds,
    I am trying get values of Open and Closing stock on date wise form the Table MARD and MBEW -Material Valuation but it does not match with MB5B reports,
    Could anyone suggest correct table to fetch the values Open and Closing stock on date wise for MB5B reports.
    Thanks
    Mohan M

    Hi,
    Please check the below links...
    Query for Opening And  Closing Stock
    Inventory Opening and Closing Stock
    open stock and closing stock
    Kuber

  • Open vi error for report generation toolkt

    Originally it works fine.
    Now I upgrade to win7, LV9 and office2010.
    To open the old program by 8.6.1, I reinstalled LV 8.6.1 and report generation toolkit.
    But still got the error as attached.
    Any suggestion, thanks.
    Attachments:
    ss.png ‏184 KB

    1. MS Office 2010 is not yet supported, since it's still just a beta. I believe there are couple of changes that Microsoft make, and it could cause a problem.
    2. LabVIEW 8.6.1, and all its toolkit is not supported on Windows 7. This could cause a problkem also.
    In conclusion, you should use LabVIEW 2009, Report Generation Toolkit 2009, Windows 7, and downgrade office to XP, 2003 or 2007.
    More information: http://digital.ni.com/public.nsf/allkb/C9408B9F08D​711E786256F3300701D01

  • Open DNS follow-up report

    Interestingly, after a very positive experience by adding the open DNS numbers 208.67.222.222 and 208.67.220.220, I found today that every time I tried to open Safari it knocked me offline. So I've now resorted back to the number originally assigned to me.
    What's going on with Safari?

    Jake,
    One Verizon DSL account; one Westell 6100 modem
    Check with Verizon and find out what the max download / upload speeds should be.
    If this is the plan you purchased: http://www22.verizon.com/residential/highspeedinternet/
    *"And we’re constantly looking for ways to make our DSL faster—recently upgrading our Starter plan to 1 Mbps* download and our Turbo plan to 7.1 Mbps."*
    1 Mbps download / 7.1 Mbps is hardly high speed.
    You can check your upload/download speeds here. http://www.speedtest.net/
    To realize faster download and uploads speeds you would need to upgrade your service.
    This is more then just a DNS issue.

  • Open Field in ALV Report

    Hi all,
    i have to develop a ALV report.
    In that report i have to put a open quantity column , so that the user can enter values in that, and that value should get updated in the database.
    So please suggest me how to develop such report with open field.
    Thanks in advance,
    Regards,
    Pawan

    Hi,
    Try executing the below code
    REPORT YMS_EDITBLOCKALV.
    TABLES : rmmg1,MCHB, mkpf.
    DATA: BEGIN OF t_mseg OCCURS 0,
    zeile LIKE mseg-zeile,
    menge LIKE mseg-menge,
    meins LIKE mseg-meins,
    matnr LIKE mseg-matnr,
    werks LIKE mseg-werks,
    charg LIKE mseg-charg,
    bwart LIKE mseg-bwart,
    END OF t_mseg.
    DATA:BEGIN OF t_mchb OCCURS 0.
    INCLUDE STRUCTURE mchb.
    data flag type c.
    matnr LIKE mchb-matnr,
    charg LIKE mchb-charg,
    werks LIKE mchb-werks,
    clabs LIKE mchb-clabs,
    DATA END OF t_mchb.
    TYPE-POOLS slis.
    data: progname like sy-repid,
    fieldcattab TYPE slis_t_fieldcat_alv WITH HEADER LINE.
    data tabindex type i.
    data wa_matnr LIKE mchb-matnr.
    progname = sy-repid.
    SELECTION-SCREEN BEGIN OF BLOCK b_b1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS s_docno FOR mkpf-mblnr. " OBLIGATORY.
    PARAMETERS p_docyr LIKE mkpf-mjahr. " OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK b_b1.
    START-OF-SELECTION.
    SELECT zeile
    menge
    meins
    matnr
    werks
    charg
    bwart
    FROM mseg
    INTO TABLE t_mseg
    WHERE mblnr IN s_docno AND mjahr = p_docyr.
    CLEAR fieldcattab.
    fieldcattab-col_pos = 1.
    fieldcattab-fieldname = 'ZEILE'.
    fieldcattab-tabname = 'T_MSEG'.
    fieldcattab-fix_column = 'X'.
    fieldcattab-seltext_l = 'Item'.
    APPEND fieldcattab.
    CLEAR fieldcattab.
    fieldcattab-col_pos = 2.
    fieldcattab-fieldname = 'MENGE'.
    fieldcattab-tabname = 'T_MSEG'.
    fieldcattab-seltext_l = 'Quantity'.
    APPEND fieldcattab.
    CLEAR fieldcattab.
    fieldcattab-col_pos = 3.
    fieldcattab-fieldname = 'MEINS'.
    fieldcattab-tabname = 'T_MSEG'.
    fieldcattab-seltext_l = 'Unit'.
    APPEND fieldcattab.
    CLEAR fieldcattab.
    fieldcattab-col_pos = 4.
    fieldcattab-fieldname = 'MATNR'.
    fieldcattab-tabname = 'T_MSEG'.
    fieldcattab-seltext_l = 'Material'.
    APPEND fieldcattab.
    CLEAR fieldcattab.
    fieldcattab-col_pos = 5.
    fieldcattab-fieldname = 'WERKS'.
    fieldcattab-tabname = 'T_MSEG'.
    fieldcattab-seltext_l = 'Plant'.
    APPEND fieldcattab.
    CLEAR fieldcattab.
    fieldcattab-col_pos = 6.
    fieldcattab-fieldname = 'CHARG'.
    fieldcattab-tabname = 'T_MSEG'.
    fieldcattab-seltext_l = 'Batch No'.
    APPEND fieldcattab.
    CLEAR fieldcattab.
    fieldcattab-col_pos = 7.
    fieldcattab-fieldname = 'BWART'.
    fieldcattab-tabname = 'T_MSEG'.
    fieldcattab-seltext_l = 'Inventory'.
    fieldcattab-hotspot = 'X'.
    APPEND fieldcattab.
    end-of-selection.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
    I_INTERFACE_CHECK = ' '
    I_BYPASSING_BUFFER =
    I_BUFFER_ACTIVE = ' '
    I_CALLBACK_PROGRAM = PROGNAME
    I_CALLBACK_PF_STATUS_SET = ' '
    I_CALLBACK_USER_COMMAND = 'USERCOMMAND1'
    I_CALLBACK_TOP_OF_PAGE = ' '
    I_CALLBACK_HTML_TOP_OF_PAGE = ' '
    I_CALLBACK_HTML_END_OF_LIST = ' '
    I_STRUCTURE_NAME =
    I_BACKGROUND_ID = ' '
    I_GRID_TITLE =
    I_GRID_SETTINGS =
    IS_LAYOUT =
    IT_FIELDCAT = fieldcattab[]
    IT_EXCLUDING =
    IT_SPECIAL_GROUPS =
    IT_SORT =
    IT_FILTER =
    IS_SEL_HIDE =
    I_DEFAULT = 'X'
    I_SAVE = ' '
    IS_VARIANT =
    IT_EVENTS =
    IT_EVENT_EXIT =
    IS_PRINT =
    IS_REPREP_ID =
    I_SCREEN_START_COLUMN = 0
    I_SCREEN_START_LINE = 0
    I_SCREEN_END_COLUMN = 0
    I_SCREEN_END_LINE = 0
    IT_ALV_GRAPHICS =
    IT_ADD_FIELDCAT = fieldcattab
    IT_HYPERLINK =
    IMPORTING
    E_EXIT_CAUSED_BY_CALLER =
    ES_EXIT_CAUSED_BY_USER =
    TABLES
    t_outtab = t_mseg
    EXCEPTIONS
    PROGRAM_ERROR = 1
    OTHERS = 2
    IF sy-subrc 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    FORM usercommand1 USING r_ucomm LIKE sy-ucomm rs_selfield TYPE
    slis_selfield.
    CASE r_ucomm.
    WHEN '&IC1'.
    tabindex = rs_selfield-tabindex.
    read table t_mseg INDEX tabindex.
    select * from mchb into table t_mchb where matnr = t_mseg-matnr.
    clear fieldcattab.
    CLEAR fieldcattab[].
    fieldcattab-col_pos = 1.
    fieldcattab-fieldname = 'FLAG'.
    fieldcattab-tabname = 'T_MCHB'.
    fieldcattab-fix_column = 'X'.
    fieldcattab-seltext_l = 'Check Box'.
    fieldcattab-input = 'X'.
    fieldcattab-edit = 'X'.
    fieldcattab-checkbox = 'X'.
    APPEND fieldcattab.
    clear fieldcattab.
    fieldcattab-col_pos = 2.
    fieldcattab-fieldname = 'MATNR'.
    fieldcattab-tabname = 'T_MCHB'.
    fieldcattab-fix_column = 'X'.
    fieldcattab-seltext_l = 'Material'.
    fieldcattab-emphasize = 'C1'.
    fieldcattab-input = 'X'.
    fieldcattab-edit = 'X'.
    fieldcattab-checkbox = 'X'.
    APPEND fieldcattab.
    clear fieldcattab.
    fieldcattab-col_pos = 3.
    fieldcattab-fieldname = 'CHARG'.
    fieldcattab-tabname = 'T_MCHB'.
    fieldcattab-seltext_l = 'Batch No'.
    fieldcattab-emphasize = 'C2'.
    fieldcattab-input = 'X'.
    fieldcattab-edit = 'X'.
    APPEND fieldcattab.
    clear fieldcattab.
    fieldcattab-col_pos = 4.
    fieldcattab-fieldname = 'WERKS'.
    fieldcattab-tabname = 'T_MCHB'.
    fieldcattab-seltext_l = 'Plant'.
    fieldcattab-emphasize = 'C30'.
    fieldcattab-input = 'X'.
    fieldcattab-edit = 'X'.
    APPEND fieldcattab.
    clear fieldcattab.
    fieldcattab-col_pos = 5.
    fieldcattab-fieldname = 'CLABS'.
    fieldcattab-tabname = 'T_MCHB'.
    fieldcattab-seltext_l = 'Stock'.
    fieldcattab-emphasize = 'C601'.
    fieldcattab-input = 'X'.
    fieldcattab-edit = 'X'.
    APPEND fieldcattab.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    I_INTERFACE_CHECK = ' '
    I_BYPASSING_BUFFER =
    I_BUFFER_ACTIVE = ' '
    I_CALLBACK_PROGRAM = PROGNAME
    I_CALLBACK_PF_STATUS_SET = ' '
    I_CALLBACK_USER_COMMAND = 'USERCOMMAND2'
    I_CALLBACK_TOP_OF_PAGE = ' '
    I_CALLBACK_HTML_TOP_OF_PAGE = ' '
    I_CALLBACK_HTML_END_OF_LIST = ' '
    I_STRUCTURE_NAME =
    I_BACKGROUND_ID = ' '
    I_GRID_TITLE =
    I_GRID_SETTINGS =
    IS_LAYOUT =
    IT_FIELDCAT = FIELDCATTAB[]
    IT_EXCLUDING =
    IT_SPECIAL_GROUPS =
    IT_SORT =
    IT_FILTER =
    IS_SEL_HIDE =
    I_DEFAULT = 'X'
    I_SAVE = ' '
    IS_VARIANT =
    IT_EVENTS =
    IT_EVENT_EXIT =
    IS_PRINT =
    IS_REPREP_ID =
    I_SCREEN_START_COLUMN = 0
    I_SCREEN_START_LINE = 0
    I_SCREEN_END_COLUMN = 0
    I_SCREEN_END_LINE = 0
    IT_ALV_GRAPHICS =
    IT_ADD_FIELDCAT =
    IT_HYPERLINK =
    IMPORTING
    E_EXIT_CAUSED_BY_CALLER =
    ES_EXIT_CAUSED_BY_USER =
    TABLES
    t_outtab = t_mchb
    EXCEPTIONS
    PROGRAM_ERROR = 1
    OTHERS = 2
    IF sy-subrc 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    endcase.
    endform.
    FORM usercommand2 USING r_ucomm LIKE sy-ucomm rs_selfield TYPE
    slis_selfield.
    CASE r_ucomm.
    WHEN '&IC1'.
    IF rs_selfield-sel_tab_field = 'T_MCHB-MATNR'.
    CALL FUNCTION 'ZALV2'
    EXPORTING
    CTU = 'X'
    MODE = 'E'
    UPDATE = 'A'
    GROUP =
    USER =
    KEEP =
    HOLDDATE =
    NODATA = '/'
    MATNR_001 = '200-200'
    KZSEL_01_002 = 'X'
    IMPORTING
    SUBRC =
    TABLES
    MESSTAB =
    SET PARAMETER ID 'RID' FIELD RMMG1-MATNR.
    CALL TRANSACTION 'MM03' and skip first screen.
    ENDIF.
    ENDCASE.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    i_callback_program = progname
    i_callback_user_command = 'USERCOMMAND3'
    it_fieldcat = fieldcattab[]
    TABLES
    t_outtab = t_mchb
    EXCEPTIONS
    program_error = 1
    OTHERS = 2.
    IF sy-subrc 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    endcase.
    ENDFORM.
    Regards,
    chandru

  • Open and closed invoices

    hi experts,
    I have to capture the parked, open and closed invoices in a report in reference to vendor...
    I got the parked invoice condition from the table BSTAT either v or w.
    But i am not getting the idea how to capture the open and closed invoices...
    Some one suggested me to use the ITEMSET structure but i donno how to capture those values can anyone suggest me how to do it...?
    SIRI

    Hi,
    you can use the same query...Also check the new code after the select..
    SELECT BUKRS BELNR GJAHR <b>BSTAT</b>
    FROM BKPF
    INTO TABLE T_BKPF
    WHERE BUKRS = P_BUKRS
    AND BSTAT IN ( ' ' , 'A' ) " ' ' - Normal document, A - Parked doc
    AND BLART = P_BLART
    AND CPUDT IN SO_CPUDT " Selection screen input.
    IF NOT T_BKPF[] IS INITIAL.
    SELECT BUKRS BELNR GJAHR BUZEI EBELN AUGBL AUGBT
    INTO TABLE T_BSEG
    FOR ALL ENTRIES IN T_BKPF
    WHERE BUKRS = T_BKPF-BUKRS
    AND BELNR = T_BKPF-BELNR
    AND GJAHR = T_BKPF-GJAHR
    AND EBELN IN SO_EBELN " selection-screen input
    ENDIF.
    LOOP AT T_BKPF.
    Parked
      IF T_BKPF-BSTAT = 'A'.
        WRITE: / T_BKPF-BELNR , ' - Parked'.
    process the next record.
        CONTINUE.
      ENDIF.
    Check for Open / Closed.
      LOOP AT T_BSEG WHERE BELNR = T_BKPF-BELNR
                                   AND      BUKRS = T_BKPF-BUKRS
                                   AND      GJAHR = T_BKPF-GJAHR
                                   AND      AUGBL <> ' '.
        EXIT.
      ENDLOOP.
    If the return code is 0 then the document is cleared..
      IF sy-subrc = 0.
        WRITE: / T_BKPF-BELNR , ' - Closed'.
    Else the document is not cleared.
      ELSE.
        WRITE: / T_BKPF-BELNR , ' - Open'.
      ENDIF.
    ENDLOOP.
    Thanks,
    Naren

  • Open and closing balances std report

    Dear All,
    please suggest me open and closing balances std report and can i suggest my user below t.code for viewing open and closing balnces for India scenarion T.code:J3RFLVMOBVED
    Regards
    Gopal.S

    hi
    kindly chk MB5B it will fullfill your requirement
    regards
    praveen.k

  • Wrong 'mini dvi to video' adapter for my 12" Powerbook 1.33

    I recently bought the M9319 mini dvi - video adapter for my 12" Powerbook 1.33 to find that the mini dvi on the adapter is a different size to the one on the computer and the adapters supplied with the computer.
    I've been doing a bit of research into this and it seems a bit of a grey area. Apple have not made it clear in advertising this product that it is only suitable for the newest 12" Powerbooks and even state that it will work with a 1.33 machine in their following article:
    http://docs.info.apple.com/article.html?artnum=86507
    Has anyone had a similar experience, or suggest an alternative product that will work? Did Apple make an older version that works with the 1.33?
    Any help would be much appreciated. Thanks, Graeme.

    Just took the adapter to my local Apple store and they identified it as a mini VGA to video adapter - not what it said on the packaging!
    I've noticed a few posts with this problem, so just double check before you leave the store that the packaging matches the product.

  • FCP video out from mini-dvi to video adapter

    Is it possible to get the output of viewer / canvas from mini-dvi to video adapter for the external tv out.
    My configurations,
    Final Cut Pro 5.0
    MacBook
    Mac OS X 10.4.8
    Mini-dvi to video adapter for external output of video
    Need to find the solution.
    Please suggest your ideas to get things work.
    Expecting reply soon.

    If you use the Matrix MXO, yes. You can use the DVI out to feed a NTSC/PAL monitor. This is one of the only ways to monitor HDV.
    If you want to monitor DV (either PAL or NTSC), use firewire out to a DV/Analog converter and feed the Monitor from the converter.
    x

  • Using mini-DVI to VGA adapter to Samsung display

    I have 2009 late model of mac mini, The text on display looks washed out, not clear or sharp at all from day one, I thought it was the old model of monitor, tried the same cable to another monitor on another computer, SAME. so I thought the problem could be the cable or adapter.
    It's hard for me to believe is the signal from computer. I'm using VGA adapter made by Dynex bought from Best Buy.
    Anybody has suggestions?? Thanks

    Yeah, My old Samsung is lcd synmaster 17", bought many years ago at around $1000. Crazy, crazy price looked back. It's fine when I used it on the retired old Dell. It must be the adapter, trying not to buy another VGA adapter, could not image my next lcd will use one, anyway.
    This cable has only 14 pins vs 15 pins on the other cable, not sure if it matters?? Or if Safari has anything to do with it??
    Thank for you reply...

  • Mini DVI to Video Adapter - S-Video Resolutions / HDMI

    Hello,
    I just got my Mini DVI to Video Adapter and I using a S-Video cable to plug to my HD LCD 32'' TV.
    When I connect everything, the resolution drops from 1280x800 to 1024x768.
    How can I change back to 1280x800?
    I don't know but I'm kind of disappointed with the QUALITY of the video... is there any way I could improve this? Perhaps using a Mini-DVI to HDMI Adapter? Does it exist? Will upgrade the resolution and/or the quality of the video?
    I've read that audio is not supported using the Mini-DVI. To be honest, I don't really care about the audio... I can use the analog. But I'm very very disappointed with the quality of the video...
    Thanks anyone

    Well,
    Based on what you said, I should have three options:
    A: MacBook -> MiniDVI to DVI Adapter -> DVI to HDMI cable -> TV with HDMI input
    C: MacBook -> MiniDVI to DVI Adapter -> DVI to DVI cable -> TV with DVI input
    B: MacBook -> MiniDVI to HDMI Adapter -> HDMI cable -> TV with HDMI input
    What should work best?
    My TV does not support DVI input, so that's kind of narrow it down, right?! Leaving options A and C.
    I don't have any of the adapters. In both ways I'll end up having to buy stuff. Which is less expansive?
    Thanks in advance
    Cheers.

Maybe you are looking for

  • How to capture userinfo after a partner application is authenticated through SSOSDK?

    I have successfully installed and deployed the Partner application for Portal using SSOSDK. My question is, once the user is authenticated through SSOPartnerServlet.java and gets thrown back to the partner app(PAPP), how do we get the user info(i.e.

  • I connect my ipod then it ejects automatically?

    I have a 3rd generation ipod nano and have had it for a couple of years now. Recently when i plug it into the usb and onto my computer (which is windows xp) it comes up on the screen as conneted then about 2 seconds later it says ejecting and ok to d

  • Windows Installer error while trying to install Acrobat Reader 8

    I am trying to install Adobe Acrobat Reader 8 off the CS3 disc. I already have Acrobat 8 Professional (8.2.3) installed. I just need the Reader. Whenever I try to install the Reader I get the following error, "The Windows Installer Service could not

  • IMac display with Dell Inspiron

    I've searched and could not locate the answer to this. My "new" wife has brought a Dell Inspiron 6000 into the family. Not being a windows user - EVER I am looking to see if I can connec the dell to my iMac duo 20" to extend the display. Any suggesti

  • Random order by in SQL!

    11g Hi There,   I had posted this query in the Application express forum, but I guess it really should have been posted in this forum, since its more of a sql question. Apologies if this is against the forum rules.   We have a pie chart in Applicatio