11.1.1.6.0 Usage Tracking not work

Hi Gurus,
I'm trying to set usage tracking in 11.1.1.6.0,I followed the steps in following link:
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi1116/ut/ut.html
The problem is that I can't view any data in the S_NQ_ACCT table. My database is Oracle 10.2, but in the article it said 11.2 or later,so please let me know if it is the database issue.

You need to import S_NQ_ACCT metadata again from your current database(BIPLATFORM) then only it will work. Because datatypes changed and new unique "ID" added in 11.1.1.6.
I also faced same issue and after importing metadata again and joined the table again then it worked for me.
Thanks,
Prasad

Similar Messages

  • OBIEE 11g - Usage Tracking Not Working

    Dear All,
    I have enabled the usage Tracking in OBIEE 11g by using Setting up Usage Tracking in Oracle BI 11g guide.
    Still i am getting the following error
    Usage Tracking not started due to non-existent Usage Tracking table "12-Usage Tracking"."Usage Tracking Schema"."S_NQ_ACCT".
    In my RPD,
    Database Name : "12-Usage Tracking"
    Physical Schema Name : "Usage Tracking Schema"
    Physical Table Name : "S_NQ_ACCT"
    This table reside under BIPLATFORM Schema in Oracle.
    I have followed the steps mentioned in the Document, still unable to find why getting such error. Please point out if any mistake exists.
    Please advice.

    Hi,
    Good for you.
    Maybe you can post the solution and how you solved your issue to help other users having the same problem and then close the thread (currently it's still This question is Not Answered.)

  • IPhone 6 Battery Usage setting not working.

    When I go to my setting and check my Battery Usage setting it states: "Battery information will be available after using iPhone for a few minutes". I've been using it for hours and I get the same response when I go to the setting. I've turned off my phone multiple times to see if that would resolve it, but it hasn't. Is anyone else experiencing this behavior?

    Hello.
    I have the same problem. iPhone 5, iOS8.0.2, used for a few days - still no usage statistics, only "Battery information will be available after using iPhone for a few minutes".
    I tried restore iPhone (DFU) without restoring backup from iCloud/iTunes, resets, hard-resets, erase all settings, drain battery to 0% and charge to 100% overnight etc. - nothing helps.
    I wrote to the Apple about this problem.
    Here is the page that you can use to contact with Apple and report a bug - https://www.apple.com/feedback/iphone.html
    Please, give the title of "iOS8 battery usage statistics not working" (or something like that), choose the "Bug ​​report" and describe the problem. Perhaps it will make that Apple will eliminate this problem in the next version of iOS. More report - greater chance.
    Regards 

  • IPhone 6 Battery Usage function not working

    Battery Usage feature continues to read; "Battery information will be available after using iPhone for a few minutes" even though I have now had the phone and used it for one week. Using iPhone 6, 64G, IOS 8.0.0.(no iOS updates have yet been applied) 
    A few days ago I attempted some suggestions posted by others. One of those was to let the battery drain to zero then fully charge. This had no affect on the Battery Usage feature. Another suggestion that i tried was to close all open apps on phone, then shut down phone and then turn back on. This did not resolve the Battery Usage issue either.
    Is apple aware of this issue? Any help would be appreciated.

    Hello.
    I have the same problem. iPhone 5, iOS8.0.2, used for a few days - still no usage statistics, only "Battery information will be available after using iPhone for a few minutes".
    I tried restore iPhone (DFU) without restoring backup from iCloud/iTunes, resets, hard-resets, erase all settings, drain battery to 0% and charge to 100% overnight etc. - nothing helps.
    I wrote to the Apple about this problem.
    Here is the page that you can use to contact with Apple and report a bug - https://www.apple.com/feedback/iphone.html
    Please, give the title of "iOS8 battery usage statistics not working" (or something like that), choose the "Bug ​​report" and describe the problem. Perhaps it will make that Apple will eliminate this problem in the next version of iOS. More report - greater chance.
    Regards 

  • Usage Tracking not showing correct data.

    We have configured usage tracking in our project.while creating a report with(Subject Area,Query,Request ) it shows the dashboard filter query of all subject area in a particular subject area.
    Eg : If Subjuct area SA1 has a dashboard prompt query "@@@@' ,and Subjuct area SA2 has dashboard prompt query "$$$$$' ,both the querys are shown in Subjuct area SA3 in the usage tracking reports.

    Hello,
    We implemented usage tracking too
    Make sure you are not running into the following BUG pre-10.1.3.4.1:
    BUG 7233756 - USAGE TRACKING DOESN'T CAPTURE AD-HOC REPORTS CORRECTLY
    We found this issue and verified it was resolved in 10.1.3.4.1.this problem is still there, and we are getting value of random subject are populated for drill down queries. is there any bug for this too?

  • OBIEE Usage Tracking not collecting all data!

    Hi guys
    Strange problem here. We have set up usage tracking (OBIEE 11.1.1.6) and it is running smoothly, except that we dont get all the data. I have adjusted the field "Query_Text" to contain 4000 bytes, and this also gave us an improvement - it collects more usage tracking. But we aren't getting all the usage stats...
    Does anybody have a an idea as to what could be wrong here?
    Best regards, Jacob

    Jacob J wrote:
    Hi guys
    Strange problem here. We have set up usage tracking (OBIEE 11.1.1.6) and it is running smoothly, except that we dont get all the data. I have adjusted the field "Query_Text" to contain 4000 bytes, and this also gave us an improvement - it collects more usage tracking. But we aren't getting all the usage stats...
    Does anybody have a an idea as to what could be wrong here?
    Best regards, JacobWhat usage stats are missing? Is there any pattern/behavior where the stats are not being inserted into the tables?

  • Usage Tracking not displaying in Data in 11g

    Hi Gurus,
    One of my collegues complained that the Usage Tracking(UT) which is OOTB functionality in 11g does not show any data expect the Time table.
    Is this a bug, as UT is pre-configured in 11g, do we need to do any customization for this to make it work.
    Can please anyone help with the steps to troubleshoot.
    Regards,
    Amit

    Hi A,
    The steps are all done they can see the data in the View Data Section in the Physical Layer, but no data is appearing when they create the Reports in Answers, thats kind of weird was my first expression. I asked them to check the Business Model Diagram but they are of the opinion that as it is OOTB functionaly they did not meddle with the BMM.
    Really critical and need to bring the data in the Answer in 11g, any quick help will be appreciated.
    Rgds,
    Amit

  • Keyboard and tracker not working

    have just purchased a macbook air. After only a couple of hours my notebook keyboard and tracker are not working. the cursor is stuck on upper left hand side of the screen and its stuck on 'bluetooth setup assistant' looking for a wireless keyboard.
    Have tried forced shutdown a couple of times but nothing happens
    Any ideas? The mac forums are saying I need to reinstall the OS but I don't have a CD drive ( yet!)
    D

    It is a common fault with new Mac Air. I had to bring it to an Apple store to get fixed. They did it for free.

  • Data Tracking not working as expected

    Hi,
    I have created a report on a universe which is based on a BEx Query. When I run the WebI report in InfoView saved data shown, I then select tracking and select the current data (fixed) as the reference data. I then enter a key date for the data (which effively looks at data at a point in time) and the data changes but the changes are not marked. However, the reference date at the bottom of infoview is the saved data date.
    I then refresh the data again and change the key date to a different date and changes are shown based on the data which I refreshed in the report NOT the saved data. I have had a look at the bottom of infoview and the data tracking reference date changed to the REFRESHED data. I then refreshed it again and the reference date remains as the refreshed data.
    Just to re-confirm I did select use Fixed reference data.
    Any ideas why I am having this problem?
    Thanks

    Hi,
    The key date is in the SAP BW BEx Query which the universe is created on. The WebI report is then created on that universe. The key date changes the data.
    I have just tried loading the data into SAP BW so that the data changes. I then went to the WebI report which is showing the old data and has tracking on by default when the report was created. the fixed data date at the bottom says the old date. I then refresh the new data is shown and the fixed data date changes....tracking is still not working as we expect.
    Any ideas
    Thanks

  • Camera tracker not working on large .mov file

    I am using the camera tracker and it works perfect on a small .mov file however, once I import a larger .mov file everything crumbles. Text not working, points don't show up, etc.
    Any ideas?

    First idea is for you to provide the name of the program you are using, so a Moderator may move this message to the program forum where actual users may respond

  • Ducking music-track not working in preview

    Tried ducking a music-track in several clips, but couldn't get it to work reliable. On the first clip it worked, on others volume level of the music-track stayed the same, whatever value I've set the ducking slider to.
    After much experimenting and browsing the web, I found the following post by Winston Churchill:
    http://discussions.apple.com/thread.jspa?messageID=6636047
    He recommended to export the clip and check the final result. And in fact, the music level followed the setting in the exported movie.
    So this is a bug in iMovie08. While it is not a big issue, if you know the ducking works on export, it can drive you nuts, if you rely on iMovies preview mode and can't get it to work.
    And what makes me wondering even more, that this post is from Feb 18, 2008 and the bug is still present in June 2008.
    Peter

    hi there
    i had a problem with my wifes iphone 4s, today morning while travelling to work i changed a setting on repeat option and changed it to repeat artist, it was fine until when i finish my work and on my way back i found songs are not playing anymore, lots of stop signs next to my song list, play/pause button not working, album arkwork keep moving from one to another on its own, so after i reach home i try to do some research on Apple support communities, try to soft reset my phone closing all the apps on background didnt work, also note that control centre music player was not working as well. none of the solutions worked. after trying for two hours i found out that the trouble is in repeat options , so i changed it from repeat artist to repeat off. and the music start playing as usual, but i still have those stop buttons next to the songs i tried to play earlier. At least it fixed temporarily. please also note that in the meantime i tried to sync my phone with the pc and suddenly its start syncing all the songs again assuming there were no songs on my iphone.  so guys i think soft reset might not help all the time but try to remember what settings you changed recently and change it back to the original option, not sure ,but it might help.

  • Has anyone ever had a problem with usage calualtor not working, got a data over charge

    Been keeping track of my data usage from the general folder in settings. This past month I went over 3G's and when I tally up their recordings to mine it does not add up. Anyone else notice this problem.tks

    If you aren't receiving password reset emails and your security questions don't work, someone has hijacked your account.
    This happened to me.
    You need to use Expresslane to contact iTunes support to regain access to your account ASAP.

  • Application Usage Report not working

    I'm using ARD 3.1 to help manage 190 10.4.8 clients.
    I have the data settings for all my client computers set to collect application usage data and user accounting data. I have not set them to upload the data to an ARD server. I assume that this means the usage data will be stored on each client and when I request an application usage report from a client it will be available to upload.
    When I request the application usage report the task fails with the message "Couldn't collect report data".
    Can anyone tell me what I'm doing wrong here?

    I believe that, if you you disable uploading, it automatically disables the automatic report data generation on the clients... but I may be wrong. In order to track application usage and user accounting, I you might need to enable the automatic uploading.
    The other thing to try would be to check the "Rebuild data for report" checkbox when running a report. This is the "hint" to the client that it needs to send data to the admin.

  • Usage Meter Not Working in Chrome - Redirect Loop

    Using Google Chrome I'm unable to view my broadband usage. When I click the link in 'My BT' the link ends up as a massive URL and Chrome informs that it's hit a redirect loop.
    Works fine in Internet Explorer though.
    Just an FYI
    Chrome Version 32.0.1700.102 m

    Hi Ignitionnet and welcome.
    Are you getting any error messages? Can you give us a screen shot of the issue? Give us as much detail as possible and we’ll try and help.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Mocha tracking not working when applied to AE clip

    Thank you in advance for reading this.
    I'm a complete newbie to AE and, frankly, video editing in general. I'm trying to replace faces in a video with png pictures. I'm really not trying to go for the professional look and my skills wouldn't allow it if I was .
    I rendered my clip as sequenced jpgs in AE then added splines in mocha and inserted my pngs there to see how it looks. I am very happy with the results in Mocha. However, the tracking doesn't line up when exporting the data to my Clip in AE. If needed, I can upload my project somewhere to further illustrate my situation.
    I'm really enjoying this experiment with video editing (even though frustration has more then set in) and would like to improve my skills in time. Please help with my first few baby steps towards that goal!
    Thanks Again!

    Check this Martin Brennand's list to identify and solve your issue.
    Report back if you need some more help (please, give detailed explanation of what you are doing and what exactly is going wrong).

Maybe you are looking for