11.1.1.6 upgrade stalls on 'Error in writing.... awt.dll

Hi,
I am upgrading from 11.1.1.5 to 11.1.1.6 and the upgrade stalls with the error that it cannot write c:\oracle\middleware\oracle\Oracle_Bi1\jdk\jre\bin\awt.dll - the process cannot access the file because it is being used by another process...
Before I started this windows stand alone upgrade I stopped all services - is there anything else that can be using this file - anyone suggest what I need to kill to continue?
thanks,
Robert.

Assuming you came across this thread and checked out the Metalink note mentioned in there already: Problems with patch 10.2.0.3 installation
Did you try using the Process Explorer utility to see what program has the file locked down?

Similar Messages

IT+ upgrade d/l errors: possible solution

24 out of my 139 songs that were upgradable were stalled (various errors) for a few days now so I figured I'll delete temp files and start again. I went to Downloads inside my iTunes Music folder, deleted all the contents and opened iTunes again. It actually worked for me!! Next time around iTunes downloaded all 24 songs in less than an hour (which is still a long time considering past performance, but at least I've got it).

You can follow the instructions here:
http://www.apple.com/macosx/uptodate/

SharePoint 2013 site collection 'upgrade completed with errors'

Hi All,
I am in process to upgrade SharePoint 2010 to SharePoint 2013 with all steps as mentioned in TechNet.
I was able to get all the SP2010 UI in SP2013 environment. However, when I navigated to top level site and clicked on “Site
Collection health checks”. In SP2010 environment I never used (as Farm Admin) any Video content type. It belongs
to out-of-the-box "digital asset content types" and cannot be deleted.
Therefore I changed the name of Video to our department name like "Video - Company" and ran the site collection health check again. This time there was no conflict for content types.
After ran the site collection upgrade I got following error.
-------------------------------------------START------------------------------------------
05/05/2014 14:34:28.66 OWSTIMER (0x1474)
0x123C SharePoint Foundation Upgrade
SPFeatureDefinition aj2bj
ERROR Feature upgrade action 'AddContentTypeField' threw an exception upgrading Feature 'CTypes' (Id: 15/'695b6570-a48b-4a8e-8ea5-26ea7fc1d162') in Site 'http://sp13fe01-dev': Field type
Rating is not installed properly. Go to the list settings page to delete this field.
32d48d9c-70d4-f09a-6073-526808f844be
05/05/2014 14:34:53.04 OWSTIMER (0x1474)
0x123C SharePoint Foundation Upgrade
SPSiteWssSequence2 ajy6m
ERROR Feature upgrade incomplete for Feature 'CTypes' (Id: 15/'695b6570-a48b-4a8e-8ea5-26ea7fc1d162') in Site 'http://sp13fe01-dev'. Exception: Field type Rating is not installed properly. Go to the list settings
page to delete this field. 32d48d9c-70d4-f09a-6073-526808f844be
05/05/2014 15:18:43.95 OWSTIMER (0x1474)
0x123C SharePoint Foundation Upgrade
SPManager ajxoe
ERROR RunUpgradeSiteSession [SPSite Url=http://sp13fe01-dev] failed.
32d48d9c-70d4-f09a-6073-526808f844be
05/05/2014 15:18:44.16 OWSTIMER (0x1474)
0x123C SharePoint Foundation Upgrade
SPManager ajxoe
ERROR Exception: Upgrade completed with errors. Review the upgrade log file located in C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS\SiteUpgrade-20140505-143330-61.log. The
number of errors and warnings is listed at the end of the upgrade log file.
32d48d9c-70d4-f09a-6073-526808f844be
05/05/2014 15:18:44.16 OWSTIMER (0x1474)
0x123C SharePoint Foundation Upgrade
SPManager ajxoe
ERROR at Microsoft.SharePoint.Upgrade.SPUpgradeSession.CheckPoint() at Microsoft.SharePoint.Upgrade.SPUpgradeSession.LogEnd() at Microsoft.SharePoint.Upgrade.SPManager.RunUpgradeSiteSessionCore(Object
lockObject, SPSite site, SPUpgradeOperationFlags upgradeOperationFlags, Boolean checkConcurrentSiteUpgradeSessi
32d48d9c-70d4-f09a-6073-526808f844be
-----------------------------------END-------------------------------------
Feature ID 695b6570-a48b-4a8e-8ea5-26ea7fc1d162 is Standard Content Type Definitions https://social.technet.microsoft.com/wiki/contents/articles/7695.sharepoint-2010-list-of-features-id-displayname-and-scopes.aspx.
Any expert to solve the issue??
Thank you.
regards,
Aroh Shukla

Hi All and Inderjeet,
Thanks for your reply and pointers.
I did follow the steps as mentioned in the links above. I used some third party solutions but not for any Video solution. I was able to successfully migrated the SP2010 (WSS_Content) to SP2013 (WSS_Content) environment a few weeks back with exactly same
third party solutions and no site collection error:
I renamed the default and out-of-the box video site content type as shown:
I ran the "Site Collection Health Check" and did not receive any error as in my second screenshot.
But, after upgrade the Site Collection Upgrade and got the same errors.
I don't know if there is any SharePoint Server 2013 patch gave this error as I keep run the Windows Server 2012 (not running R2) and SharePoint Server 2013 regularly.
Can suggest how to resolve this error?
Many Thanks!!
--Aaroh
Aroh Shukla
The same here. Opening a support ticket with MS.

Error in writing to file libnjssl.so while upgrading iAS

Hi folks,
'm trying to upgrade an EBS from 11.5.8 to 11.5.10.2
One pre requisite is to apply patch 2376472 , which upgrades iAS to 8.1.7.4
This patch gives the following error:
Error in writing to file /u01/oracle/mavora/iAS/lib/libnjssl.so
File is generated but it seems it can't be written (it has zero bytes)
runinstall was ran from $IAS_ORACLE_HOME/bin
logged in as app user
App and DB are both down.
ORACLE_SID was set as MAV (the same ORACLE_SID as oracle db user)
Any suggestion ?
Thanks in advance!

Is the old file present beforehand? Can you rename it?
I vaguely remember of having written a note for this some 5 years ago but it may have become archived. You could consider contacting Oracle Support to dig for it :)

Itunes was working fine. Tries to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue.

Itunes was working fine. Tried to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue. Program still works, simply cannor upgrade.

Thanks b noir,
I tried this solution without success. After FixIt ran and didn't find a problem, either in looking for issues with "software upgrade" or "iTunes" it kindly offered to help me uninstall iTunes. I had thought of this as a possibilty but it seems to me that if you do that you lose a lot of "non-native-to-Apple" information you might have entered. I did this once and recovery was painfull. Is there a way to uninstall iTunes without losing all of that sort of thing? Any help would be appreciated.

Startup upgrade ORA-00205: error in identifying control file

Hi,
I am doing a manual upgrade from 10.2.04 to 11.2.03.
I have installed 11.2.0.3.
Ran utlu112i.sql
Copied TNSNAMES and LISTENER.ora,init.ora from 10g home to 11g home respective directories.
Commented all dump_dest paramteres in 11g init.ora and added diagnostic_dest parameter
exported all the varaiables as follows.
export ORACLE_HOME=/oracle/ora11203
export PATH=$ORACLE_HOME/bin:$PATH
export ORACLE_SID=OMIGTEST
export TNS_ADMIN=$ORACLE_HOME/network/admin
export ORACLE_BASE=/oracle/ora11203/app/ora11203
Now when i try to start DB from the unix session where all of above variables are set,i am getting following issue.
SQL> startup upgrade
ORACLE instance started.
Total System Global Area 1636892672 bytes
Fixed Size                  2183056 bytes
Variable Size            1090519152 bytes
Database Buffers          536870912 bytes
Redo Buffers                7319552 bytes
ORA-00205: error in identifying control file, check alert log for more info
Alert log says as below.
ORACLE_BASE from environment = /oracle/ora11203/app/ora11203
Thu Aug 23 15:03:36 2012
ALTER DATABASE   MOUNT
ORA-00210: cannot open the specified control file
ORA-00202: control file: '/oracle/ora11203/dbs/cntrlOMIGTEST.dbf'
ORA-27037: unable to obtain file status
HPUX-ia64 Error: 2: No such file or directory
Additional information: 3
ORA-205 signalled during: ALTER DATABASE   MOUNT...In init.ora of 11g (which is copied from 10g) ,i have commented our control file path entry.
Kindly assist me as i am doing upgrade for the first time.
Thanks
Edited by: user10698496 on Aug 24, 2012 2:47 AM

Hi,
Issue of sqlplus is solved after setting proper LD_LIBRARY_PATH.
But eve after that startup upgrade showing same error.
sqlplus '/as sysdba'
SQL*Plus: Release 11.2.0.3.0 Production on Thu Aug 23 16:22:16 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing optionsSQL> startup upgrade
ORACLE instance started.
Total System Global Area 1636892672 bytes
Fixed Size 2183056 bytes
Variable Size 1090519152 bytes
Database Buffers 536870912 bytes
Redo Buffers 7319552 bytes
ORA-00205: error in identifying control file, check alert log for more info
Do i copy control file from 10g home and place in in 11g path and mention it in init.ora before upgrade?
Thanks

Upgrade - Health Check Error

Hi All, I am upgrading the site collection which has NO workflow implemented in 2010. When I am doing health check before the upgrade I am getting this
•<websiteUrl>/_catalogs/wfpub/Approval - SharePoint 2010/ReviewApproval_1033.vdw - Reset page to default
•<websiteUrl>/entsearch/Pages/peopleresults.aspx - Reset page to default
•<websiteUrl>/_catalogs/wfpub/Collect Feedback - SharePoint 2010/ReviewFeedback_1033.xoml.wfconfig.xml - Reset page to default
•<websiteUrl>/_catalogs/wfpub/Approval - SharePoint 2010/ReviewApproval_1033.xoml.wfconfig.xml - Reset page to default
•<websiteUrl>/_catalogs/wfpub/Collect Feedback - SharePoint 2010/ReviewFeedback_1033.vdw - Reset page to default
•<websiteUrl>/_catalogs/wfpub/Collect Signatures - SharePoint 2010/Signatures_1033.vdw - Reset page to default
•<websiteUrl>/entsearch/Pages/results.aspx - Reset page to default
•<websiteUrl>/_catalogs/wfpub/Collect Signatures - SharePoint 2010/Signatures_1033.xoml.wfconfig.xml - Reset page to default
•<websiteUrl>/Education Documents/Forms/template.dotx - Reset page to default
•<websiteUrl>/_catalogs/masterpage/VariationRootPageLayout.aspx - Reset page to default
What is this error about? Should I proceed the upgrade with this error or resolve?
Please advice.
Regards,
Khushi
Khushi

Hi,
According to your post, my understanding is that you got “Reset page to default” error in Health Check.
If you haven't customize any workflow or anything, you can just reset them to the default, it’s OK.
Because in the database the sourse pages were completely uncustomized, out of the box.
So, you can reset them to the default, then check with Health Check, it would no error again.
http://www.chrismcnulty.net/blog/Lists/Posts/Post.aspx?ID=113
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Upgrade assistant Server error: your username is root, but must be SID adm

Hi GURU's,
I am working on "Combined Upgrade & Unicode Conversion" 4.6C ==> NW2004s
When starting Upgrade assistant and continuue with upgrade getting following error:
Server error: your username is root, bu must be <SID>adm
I have option to continue, or cancel
When I choose "Continue" Upgrade assistant disconects from Upgrade server
Has someone any idea, what is the reason, and how can I solve this issue.
PS: I have also tried to start upgrade with <SID>adm user, but the same error.
Thanks for your help in advance.

Hi,
The whole upgrade should only be executed using <sid>adm, not root. I suggest to re-run the upgrade using <sid>adm user.
Also ensure all files in /put directory have correct permissions.
Cheers!

Upgrade file pattern error

Model BEFW11S4
Version 3
Firmware 1.2.
I have connected my Win XP laptop with cable directly to the router, and I am trying to update firmware to version 1.45.10 which should be the correct update for my model, but the upgrade is interrupted with "Upgrade file pattern error".
I have tried hard-resetting the router before upgrading, but with the same result.
What to do?

How are you upgrading the routers firmware? Are you using the router web-based user-interface? If you are then try using this alternate way...
Go to www.linksys.com/downloads .. search for BEFW11S4 v3 ... then download the Set-up Wizard. Use this to upgrade your router instead. When you run this program, it will ask you for a server, password and then a file. Server is the router IP, password is the router password (default is admin) and file would be the firwmware you downloaded... once you input the necessary info... hit upgrade and you should be good to go.

Error re-trying Stalled Operation Error

Hi,
We have a solution that uses Workspace and assigns tasks to users/queues. Sometimes we get stalled operation errors and we re-try them after fixing whatever may have been wrong in our solution. We currently have one stalled operation error that does not re-try successfully.
We instead get the below error from adminui:
When looking at the error in the server log, this is the error we get:
ERROR [com.adobe.idp.jobmanager.execution.workadapter.JobStoreAdapter] (http-0.0.0.0-8080-1) Job not found for job id f05f87640a8b04077cc5f27ad1a1e817
Does anyone have an idea what may cause this kind of an error? Your input will be much appreciated.
Thanks,
Enock

There are a lot of different opinions about partitioning in Mac OS X and you can read some of them here:
http://forums.cnet.com/5208-7592_102-0.html?forumID=25&threadID=44865&messageID= 530144
and here
http://forums.appleinsider.com/archive/index.php/t-8096.html
My opinion is that partitions cam be useful when:
1. the OS can't manage big volumes (as it was in the past)
2. the OS can't optimize the space on big volumes
3. want to install 2 or more separate OSes
4. organization (like in your case).
Now, OS X filesystem (HFS+) is robust and reliable and OS X is a multitasking system that parallelizes I/O operations like reading or writing a disk.
So if you have 2 separate hard disk the system can parallelize the operations (i.e. reading from one and writing into another one) but if you have 2 partitions the system (or better the disk subsystem) have to jump back and forth among the partitions.
About the linking schema of the Audio interfaces and the FW hard disks it can change: I connect my FW disk to the MOTU and the MOTU to the mac while a friend of mine have to put the disk before of his Presonus.
Thanks for the beer!
cheers
rob

ITunes upgrade/fresh install error!

Hello all.
I am using an iPod Touch second generation. Tried to upgrade to iOS5 but it required me to upgrade my iTunes to the latest version. Tried to upgrade and an error popped up "Package installer error" or some sort. Been told to redownload the installer package or try to reinstall. Tried both but to no avail. I thought my current iTunes was the culprit so I uninstalled my iTunes and tried again installing the latest iTunes. But the same error popped up again!
Now I don't have any itunes, and I dont know where does the previous itunes keep my iPod backup files. I have thousands of apps over there and it would be really frustrating to lose it.
Someone please help me. Thanks in advance.

"Package installer error"
What's the precise text of that error message, please? (There's a few different ones I can think of that you might be getting.)

After new itunes upgrade getting Windows error 126 that identifies MSVCR80.dll not found. itunes unable to open. Anyone have cause and resolution.

After installing new itunes upgrade on Windows Vista PC, itunes does not open. Getting error boxes identfiying Windows error 126 (error 7) plus; MSVCR80.dll not found.
Anyone have casue and resolution?
Apple support did not have file or process available to backoff to previous itunes version v11.1.3 to allow recovery so itunes could continue use with no problems as before this new upgrade.

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

Hi, i installed an upgrade for itunes on my windows computer it came with a error message of msvcr80.dll

Hi
I installed a upgrade of itunes on my windows computer
It came up with error message of msvcr80.dll I went to repair and to reinstall itunes but this didnt fix it
Please help me

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

Iphone 4S iOs 6.1 upgrade stalled on my PC -- what can I do?

iphone 4S iOs 6.1 upgrade stalled on my PC -- what can I do?

This is good. Now you can use iTunes to Update or Restore your iPhone 4S to iOS 6.1. iTunes has to download it at some point, so now it is there which is good. If you want, you can always delete it, but this is not necessary.

Attempted a down load of an upgrade, it failed, error R6034 C runtime library incorrectly, now I cannot get access to my old iTunes

attempted a down load of an upgrade, it failed, error R6034 C runtime library incorrectly, now I cannot get access to my old iTunes
How do I recover and upgrade

I have seen a number of conversations where you need to uninstall iTunes and various other pieces of software and re-install ... if Apple is such a great company, why don't they just fix their update process so we users don't have to mess around with this ... :-(

11.1.1.6 upgrade stalls on 'Error in writing.... awt.dll

Similar Messages

Maybe you are looking for