11.1.2.3 maintenance release pre-req step

We are currently running Distributed installation of our production environment on version 11.1.2.1
Plan is to apply maintenance release 11.1.2.3 to existing 11.1.2.1
Going through document: Oracle® Enterprise Performance Management System Installation and Configuration Guide Release 11.1.2.3
Page 188
Apply any required PSEs before proceeding with maintenance the installation.
To review the list of defects fixed between earlier releases, use the Defects Fixed Finder. This
tool enables you to identify the products you own and your current implementation release.
With a single click, the tool quickly produces a customized report of fixed-defect descriptions
with their associated platforms and patch numbers. This tool is available here:
https://support.oracle.com/oip/faces/secure/km/DocumentDisplay.jspx?id=1292603.1
QUESTION:
=======
Ran the defect fixed finder tool as suggested above and it came up with list of defects fixed AFTER my current release 11.1.2.1
1) Since we are applying maintenance patch release 11.1.2.3 on top of 11.1.2.1 would it just suffice if we apply patches to address defects on top of 11.1.2.3 ALONE as a post maintenance patch step?
2) Since the instruction mentions "any required PSU's" -- is it ok we skip the PSU's for version 11.1.2.1 and proceed with maintenance upgrade -- will there be any problem with this approach. Please suggest.

I would question the requirement to install PSEs because in theory the maintenance release should be deploying the latest set of files/fixes and I would think it only relates to patches for the release you are currently running, this requirement was not in previous maintenance releases and with the software being released only a week ago it is difficult to give a definitive answer, maybe one to ask Oracle.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

PCD uograde pre-req steps ( disable EM, disable HA IM&P, chnages as per OVA

IF using PCD 10.5 to upgrade CUCM and IM&P from 9.1 to 10.5
Do you still need to do the following or will PCD do it all
Disable Extension Mobility in CUCM ( will PCD do it?)
Disble HA in IM&P ( Will PCD do it)
Change vNICs from flexible to vmxnet3 ( I noticed on one upgrade PCD didn't change vNIC)
Change OS to 64 bit
Thanks

The manual steps which are not a part of installation or upgrade through iso image will need to be done by the administrator. I also want to add that for upgrades to CUCM 10.x version there is no need to disable extension mobility.
https://tools.cisco.com/bugsearch/bug/CSCus10292/?reffering_site=dumpcr
Symptom:
This is a Documentation Defect :
========================
In pre-10.x versions of CUCM, the upgrade guide specifies that EM services need to be disabled prior to upgrade. This was specified for DB reasons. The DB team has informed us that this requirement is no longer necessary after 10.x.
From: 10.0.1 upgrade guide:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/10_0_1/CUCM_BK_U4214F9D_00_upgrade-guide-cucm-100.pdf
On page 44, under step 8, item c):
"Disable the Cisco Extension Mobility service by navigating to Cisco Unified Serviceability > Tools > Service Activation. For more information, see the Cisco Unified Serviceability Administration Guide.
Note that when you deactivate the Cisco Extension Mobility service, Cisco Extension Mobility users cannot log in and log out of phones that supp
Conditions:
no need to disable EM service during upgrades after 10.x
HTH
Manish

MASTER LEGISLATIVE HRGLOBAL PRE-REQ LIST doesn't have R12.HR_PF.B.1

Hi Friends,
I am using R12.1.1 with HRMS Patch level : R12.HR_PF.B.1 (which is R12.HR_PF.B.delta1 i believe)
I would like to apply Singapore Legislation so when i look at the MASTER LEGISLATIVE HRGLOBAL PRE-REQ LIST (Latest Oracle HRMS Legislative Data Patch Available (HR Global / hrglobal) [ID 145837.1])
I couldn't see either R12.1.1 (or) R12.HR_PF.B.1 and i could see only the later versions (R12.1.2,R12.1.3,R12.HR_PF.B.delta2,R12.HR_PF.B.delta3,R12.HR_PF.B.delta4,R12.HR_PF.B.delta5)
so do this mean i don't need to apply any Pre-Req patches for my current release/HRMS level and I can proceed with Data Install and apply hrgobal.drv?
Please confirm.
Regards,
DB

839396 wrote:
Hi Friends,
I am using R12.1.1 with HRMS Patch level : R12.HR_PF.B.1 (which is R12.HR_PF.B.delta1 i believe)
I would like to apply Singapore Legislation so when i look at the MASTER LEGISLATIVE HRGLOBAL PRE-REQ LIST (Latest Oracle HRMS Legislative Data Patch Available (HR Global / hrglobal) [ID 145837.1])
I couldn't see either R12.1.1 (or) R12.HR_PF.B.1 and i could see only the later versions (R12.1.2,R12.1.3,R12.HR_PF.B.delta2,R12.HR_PF.B.delta3,R12.HR_PF.B.delta4,R12.HR_PF.B.delta5)
so do this mean i don't need to apply any Pre-Req patches for my current release/HRMS level and I can proceed with Data Install and apply hrgobal.drv?
Please confirm.
Regards,
DBHi,
yes, you are right. this is because R12.1.1 comes with the installation. And you can not apply any pre-req before installing R12.1.1
All the patches listed in the table for pre-req are for the RUP patches which you will apply later. For example before applying RUP3 for HR you will apply 12757980 as a pre-req for Singapore.
Thanks

Problems installing AIA 2.5 Foundation Pack pre-reqs on SOA 10g

I am involved in a very large AIA project. I am creating my own environment prior to go to the customer and I have found some issues while installing the pre-reqs for the Foundation Pack on top of Oracle SOA Suite 10.1.3.4 (MLR #8) using OC4J.
I am following the attached doc, in specific these lines:
Oracle SOA Suite 10 g Release 3 (10.1.3.4 + MLR#8 or later). Use Advanced Installation option and select J2EE, the web server, and Oracle SOA Suite.
This version of AIA is tested and certified on 10.1.3.4 MLR#8 (Patch 8372150). You need to apply these additional patches over MLR#8:
* 5507491
* 7692665
* 8533397
Note: Before you apply patch 8533397, perfrom the following tasks.
1. Download OUI 10.1.0.6.0 (patch 6640838) and install it on the Oracle home with all components listed on screen.
2. Download latest 10.1 Opatch (Patch 6880880) and install it on the Oracle home.
* 8644645
I was able to install MLR#8, and then 5507491,7692665. I also did the pre-reqs for 8533397. But when trying to install 8533397, I got the following:
==================================================
D:\>opatch version
Oracle Interim Patch Installer version 1.0.0.0.63
Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
OPatch Version: 1.0.0.0.63
OPatch returns with error code = 0
==========================
So, the Opatch is with the latest version. Then I ran:
=============================
D:\8533397>opatch apply
Oracle Interim Patch Installer version 1.0.0.0.63
Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
Oracle Home : d:\oracle\soasuite
Oracle Home Inventory : D:\oracle\soasuite\inventory
Central Inventory : C:\Program Files\oracle\inventory
from : N/A
OUI location : D:\oracle\soasuite\oui
OUI shared library : D:\oracle\soasuite\oui\lib\win32\oraInstaller.dll
Java location : "D:\oracle\soasuite\jre\1.4.2\bin\java.exe"
Log file location : d:\oracle\soasuite/.patch_storage/<patch ID>/*.log
Creating log file "D:\oracle\soasuite\.patch_storage\8533397\Apply_8533397_03-31
-2010_07-48-33.log"
OPATCH_JAVA_ERROR=CheckConflict: OPatch cannot process overlay patches because o
f no OUI support. Please take latest OUI 10.1 patchset from "My Oracle Support"
and try again.
Cannot check bug/file conflict and component prerequisite checks.
ERROR: OPatch failed during prerequisite check.
OPatch returns with error code = 150
=====================
I've been trying to install the patch, but it seems OPatch is having some issues with the overlay patches and that is why is throwing that error. I also tried to do it with previous Opatch releases (52 and 62), but I got similar errors.
Do u have any suggestions?? Is there anything I can do to install those two patches (8533397 & 8644645).
In my research I noticed that the OPatch is either not being updated correctly, or simply not able to use the overlay patches, and that is why is saying that I need a most updated one. But for an Oracle DB 10.1 system, the latest OPatch version I found was 1.0.0.0.63.
Any suggestions are welcomed,
thx again
best
*..::WaLeX::..*

Hi Walter:
how r u?
Basically the issue is related when u apply patch 6640838 to upgrade OUI. If u don't do the following, u get into the error u described in ur post:
1. Before u install patch #6640838 , u need to be sure to rename the OPatch directory under $ORACLE_HOME. Once u do that, u can proceed with the application of patch 6640838.
2. Then after applying it u can download patch 6880880, in order to have the latest OPatch version (1.0.0.0.63). In this step, u just need to unzip it, and u will have a new OPatch directory under $ORACLE_HOME
3. After that, u can go and do an "opatch apply" for patches 8533397 and 8644645.
And that's it, u will get rid of that messy problem.
I ran into the same issue, but just realized the step that was causing all the problem.
Hope this helps.
best
rolando

Problems installing AIA 2.5 Foundation Pack pre-reqs

I am involved in a very large AIA project. I am creating my own environment prior to go to the customer and I have found some issues while installing the pre-reqs for the Foundation Pack on top of Oracle SOA Suite 10.1.3.4 (MLR #8) using OC4J.
I am following the attached doc, in specific these lines:
Oracle SOA Suite 10 g Release 3 (10.1.3.4 + MLR#8 or later). Use Advanced Installation option and select J2EE, the web server, and Oracle SOA Suite.
This version of AIA is tested and certified on 10.1.3.4 MLR#8 (Patch 8372150). You need to apply these additional patches over MLR#8:
* 5507491
* 7692665
* 8533397
Note: Before you apply patch 8533397, perfrom the following tasks.
1. Download OUI 10.1.0.6.0 (patch 6640838) and install it on the Oracle home with all components listed on screen.
2. Download latest 10.1 Opatch (Patch 6880880) and install it on the Oracle home.
* 8644645
I was able to install MLR#8, and then 5507491,7692665. I also did the pre-reqs for 8533397. But when trying to install 8533397, I got the following:
+==================================================+
D:\>opatch version
Oracle Interim Patch Installer version 1.0.0.0.63
Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
OPatch Version: 1.0.0.0.63
OPatch returns with error code = 0
+==========================+
So, the Opatch is with the latest version. Then I ran:
+=============================+
D:\8533397>opatch apply
Oracle Interim Patch Installer version 1.0.0.0.63
Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
Oracle Home           : d:\oracle\soasuite
Oracle Home Inventory : D:\oracle\soasuite\inventory
Central Inventory     : C:\Program Files\oracle\inventory
from               : N/A
OUI location          : D:\oracle\soasuite\oui
OUI shared library    : D:\oracle\soasuite\oui\lib\win32\oraInstaller.dll
Java location         : "D:\oracle\soasuite\jre\1.4.2\bin\java.exe"
Log file location     : d:\oracle\soasuite/.patch_storage/<patch ID>/*.log
Creating log file "D:\oracle\soasuite\.patch_storage\8533397\Apply_8533397_03-31
-2010_07-48-33.log"
OPATCH_JAVA_ERROR=CheckConflict: OPatch cannot process overlay patches because o
f no OUI support. Please take latest OUI 10.1 patchset from "My Oracle Support"
and try again.
Cannot check bug/file conflict and component prerequisite checks.
ERROR: OPatch failed during prerequisite check.
OPatch returns with error code = 150
+=====================+
I've been trying to install the patch, but it seems OPatch is having some issues with the overlay patches and that is why is throwing that error. I also tried to do it with previous Opatch releases (52 and 62), but I got similar errors.
Do u have any suggestions?? Is there anything I can do to install those two patches (8533397 & 8644645).
In my research I noticed that the OPatch is either not being updated correctly, or simply not able to use the overlay patches, and that is why is saying that I need a most updated one. But for an Oracle DB 10.1 system, the latest OPatch version I found was 1.0.0.0.63.
Any suggestions are welcomed,
thx again
best
*..::WaLeX::..*

Use higher versions of OUI Installer and OPatch - 10.2 or above

Warning while running pre-req checks for installing 11g binaries

I am trying to install 11g binaries on my box for upgrading my production db from 10.2.0.4 to 11.1.0.7. I have dev and Prod running from the same box. I already upgraded my dev instance to 11g and its home is /opt/oracle/product/11.10/dev.
I created another path for production as /opt/oracle/product/11.1.0/prod so that I can install the 11g binaries for production in there. When I run the installer, the pre-req checks gives me two warnings -
Checking PATH environment variable...
Check complete. The overall result of this check is: Failed <<<<
Problem: The installer has detected that the PATH environment variable includes other ORACLE_HOME locations in it.
Recommendation: Restart the installer after removing other ORACLE_HOME locations from PATH environment variable.
========================================================
Checking LD_LIBRARY_PATH environment variable...
Check complete. The overall result of this check is: Failed <<<<
Problem: The installer has detected that environment variable LD_LIBRARY_PATH includes other ORACLE_HOME locations in it.
Recommendation: Restart the installer after removing other ORACLE_HOME locations from LD_LIBRARY_PATH environment variable.
I ran ther pre-req again after unsetting the PATH and HOME variable. But it still gives me a warning on the PATH variable. What should I do to avoid this warning?

If I were you, I would have defined the HOMEs as "/opt/oracle/product/dev/11.1.0" and "/opt/oracle/product/prod/11.1.0" - that would eliminate the errors you are facing. It is still not too late - you can install the prod binaries as "/opt/oracle/product/prod/11.1.0", then later on "clone" the OH from "/opt/oracle/product/11.1.0/dev" to "/opt/oracle/product/dev/11.1.0" and delete the former.
You could also simply clone "/opt/oracle/product/prod/11.1.0" from "/opt/oracle/product/11.1.0/dev" rather than running the the install/patching process all over again.
HTH
Srini

Maintenance Release Issue - 11.1.2.0 to 11.1.2.3

Gurus,
I have been facing a couple of issues post applying MAINTENANCE release on 11.1.2.0 to bring it to 11.1.2.3 release.
I am not able to launch Dimension library / Application library / Data Syncronization etc
Every time I try to open it I get the following error:
A 'Internal Server Error' error occurred communicating with the server.
Can any one let me know what might be going wrong?
2. Every time I try to configure HFM, deployment to application server fails with the following exception in the configtool log.
2013-12-12T15:58:36.648+05:30] [EPMCFG] [ERROR] [EPMCFG-01020] [oracle.EPMCFG] [tid: 22] [ecid: 0000KBaMHzPEkJ8zngvH831IeOxZ000005,0] [SRC_CLASS: com.hyperion.cis.config.AntDeploymentApiAdapter] Error: [[
D:\ORCL\MW\EPMSystem11R1\common\config\11.1.2.0\resources\ant-repository\build.xml:8: java.lang.IllegalStateException: java.lang.reflect.InvocationTargetException
    at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:116)
    at org.apache.tools.ant.Task.perform(Task.java:348)
    at org.apache.tools.ant.Target.execute(Target.java:357)
    at org.apache.tools.ant.Target.performTasks(Target.java:385)
    at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
    at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
    at com.hyperion.hit.tool.deploy.ant.engine.ProjectRunner.execAtNumber(ProjectRunner.java:137)
    at com.hyperion.cis.config.AntDeploymentApiAdapter.deploy(AntDeploymentApiAdapter.java:168)
    at com.hyperion.cis.config.AppServerDeployer.deploy(AppServerDeployer.java:239)
    at com.hyperion.config.wizard.impl.RunAllTasks.executeAppDeploymentTask(RunAllTasks.java:592)
    at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:302)
    at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:92)
    at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.IllegalStateException: java.lang.reflect.InvocationTargetException
    at com.hyperion.hit.tool.deploy.ant.wrappers.ScriptTaskWrapper.execute(ScriptTaskWrapper.java:76)
    at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
    ... 12 more
Any help will be highly appreciated...
Thanks in advance.

Just telling some info, did you changed Oracle middleware home path (Oracle\Middleware folder names)??
I read somewhere if we change that default folder path, logs won't create properly.
Then regarding your issue, check IIS is running or not and did you configure EPMA successfully or not??
because here you have pasted configtool.log error msg. If no, then configure it first then try to lanuch.
If yes, then paste EPMA log here.
Please tell me which RDBMS you are using??
Thanks,
Mady

JAEHYLEE (R11i AOL) Adpatch fails with Pre-req check

Goal
이미 적용한 patch를 Adpatch가 다시또 Pre-req로 재차 확인을 요청하는 경우가 발생할 경우
Cause
adpatch는 AD_SNAPSHOT_BUGFIXES table의 bugfix_id에 record를 가지고 있어여 하나 여기에 데이타가 없는 경우에 prereq check를 잘못할수 있다
fix:
adadmin을 사용하여 Maintain snapshot information을 수행을 권고 드립니다.
Perform the steps :
adadmin : Maintain Applications Files --> Maintain snapshot information
--> Manage Snapshots within this Application System.
You must run AD Administration "Maintain snapshot information" once
for each APPL_TOP before you can apply any patch that contains a "
compatible feature prereq" line on that APPL_TOP. Running AD
Administration "Maintain snapshot information" for an APPL_TOP
completely populates the APPL_TOP's current view snapshot. This complete
information is required for the automatic prerequisite patch checking feature
to give correct results.
Reference
245362.1

Hi,
Please run the following command to check the Exchange server in your organization:
Get-ExchangeServer
Check whether there is any legacy Exchange server listed. We can double confirm the Excahnge server in the following path:
1. In ADSI Edit, navigate to Configuration >
CN=Configuration,CN=<domain> > CN=Services >
CN=Microsoft Exchange > CN=<Exchange organization name> >
CN=Address Lists Container > CN=Recipient Update Services.
2. In the result pane, right-click Recipient Update Service (Enterprise Configuration), click
Delete, and then click Yes to confirm the deletion.
3. Uninstall Exchange 2003 by using Add or Remove Programs from
Control Panel.
If there is no Exchange 2003 in your organization, please collect any error logs in Event Viewer for further troubleshooting.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

How do I determine Maintenance release level

Good morning,
Can anyone tell me how to determine the maintenance release level on an OES11.1 SP1 server ?
The instructions for NSM 4 say you need to be at OES11.1 SP1 with Jan 2013 Maintenance release applied.
When I run "cat /etc/novell-release" my reply is;
VERSION LEVEL = 11.1
PATCHLEVEL = 1
I tried looking in YaST2 "Software Management, though that was any help for me.
Is there another way to determine if the Jan 2013 Maintenance release was applied. Maybe a file date somewhere?
Thanks,
Allen

On 12/03/2015 15:16, allenmorris wrote:
> Can anyone tell me how to determine the maintenance release level on an
> OES11.1 SP1 server ?
>
> The instructions for NSM 4 say you need to be at OES11.1 SP1 with Jan
> 2013 Maintenance release applied.
>
> When I run "cat /etc/novell-release" my reply is;
>
> VERSION LEVEL = 11.1
> PATCHLEVEL = 1
>
> I tried looking in YaST2 "Software Management, though that was any help
> for me.
>
> Is there another way to determine if the Jan 2013 Maintenance release
> was applied. Maybe a file date somewhere?
As far as I know there's no command or log file which will easily show
which maintenance release(s) has/have been applied.
Since you're wanting to know whether a particular one has been applied
what you can do in this case is check your installed versions of the
packages shipped in that maintenance release. See
http://download.novell.com/Download?...d=73ZrJ9ZUGjQ~ and
http://download.novell.com/Download?...d=DHDMLrK5Wgc~ for the January
2013 Scheduled Maintenance release for OES11 SP1 inc. eDirectory.
Use "rpm -q <package>" to check which version of the package is
installed - this will also report if a package is not installed. For
example, to check which version of the ifolder3-enterprise package you
have installed use "rpm -q ifolder3-enterprise".
Given the number of novell-* packages updated by the January 2013
Scheduled Maintenance update I would use "rpm -qa novell-*|sort" to list
all novell-* package versions (note the "-qa" is needed because of the
"novell-*" wildcard).
HTH.
Simon
Novell Knowledge Partner
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below. Thanks.

ASA view maintenance release

We have a Cisco ASA 5520 and I need to view the maintenance release version. When I do a show version I see 8.2(5) and when I view the file in flash I don't see details of the maintenance number.
I'm checking our ASA due to the bulletin below where its mentioned to have 8.2(5.47) or 8.2(5.48) but I can't find the .47 or .48 on the ASA.
Thanks for any help.
Jeff
http://www.cisco.com/c/en/us/support/docs/csa/cisco-sa-20140409-asa.html#@ID

The maintenance releases (sometimes referred to as interim builds) are usually not published on the download portal. If you have a documented need for one (as is the case with this SA), the TAC can give you access to download the necessary build.
Once you've reloaded with that version as your boot image, your "show version" will then show it as running.

Instance in distributed environment for 11.1.2.1 using maintenance release

Hi Experts,
As i plan for 11.1.2.1 using maintenance (from 11.1.2).
I need clarification:
as in 11.1.2 "Oracle EPM Instance name" was similar on all servers (D:\oracle\middleware\user_project; epmsystem1)
while in 11.1.2.1 "Oracle EPM Instance" should be different (D:\oracle\middleware\user_project; epmsystem1, D:\oracle\middleware\user_project; epmsystem2, etc....)
OR EPM ORACLE Instance Directory recommended on shared drive accessible to all machine.
In my case 11.1.2 is having similar instance name on all servers.
Please suggest
Regards
Kumar

Hi John,
Thanks for the help.
As per suggested document
When you configure in a distributed environment, provide a new, unique instance name as you configure each server. For example, if you are using the default instance name epmsystem1 on the >first server, and you keep the same naming convention on subsequent servers, you would create new, unique instance names on each subsequent server, such as epmsystem2, epmsystem3, and >so on. Is it applicable in maintenance release where all instance name are similar (epmsystem1) on all servers?
Does it mean i should modify and make it (epmsystem1, epmsystem2, epmsystem3....)?
Please suggest as i am not very sure
Regards
Kumar

Error When Installing Cisco ICM Maintenance Release 8.5(4)

Hi,
I've successfully installing ICM 8.0(1a),
My environment is Windows Server 2008 R2 Enterprise, Service Pack 1 x64.
Now I'm trying to install Cisco ICM Maintenance Release 8.5(4), but the error occurs,
the log is :
2014-09-03 14:09:27 [Information] Logging initialized. Log File: C:\Temp\Maintenance Release ICM8.5(4)\20140903_140927_Maintenance Release ICM8.5(4).log
2014-09-03 14:09:27 [Information] Displaying new modal message, buffer empty: Initializing Patch Installer
2014-09-03 14:09:27 [Information] Manifest file location: C:\Users\ADMINI~1\AppData\Local\Temp\{5ADEF78E-6528-46A7-AB78-D38F394ADE23}\{0202A80B-FA3B-48B1-A64F-62AD902E62F9}\PatchManifest.ini
2014-09-03 14:09:27 [Information] Patch Information folder is C:\icm\PatchInfo_ICM_8_5_4_0_0_0_336
2014-09-03 14:09:27 [Information] Initializing Version checking data structures with data from current system and patch.
2014-09-03 14:09:27 [Error] Unable to get patch info from the registry because SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch) does not exist
2014-09-03 14:09:27 [Error] Error reading Display Name value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Error] Error reading Product value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Error] Error reading Base value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Error] Error reading Major Version value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Error] Error reading Minor Version value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Error] Error reading Maintenance Release Version value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Error] Error reading RUP Version value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Error] Error reading LRP Version value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Error] Error reading Featurette Version value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Error] Error reading Installer Version value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Error] Error reading Install Timestamp value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Error] Error reading Uninstall Location value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Error] Error reading Prior CurrentPatch value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Information] Unable to read PriorCurrentFeatures value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch) This is probably because this key was not in prior patches.
2014-09-03 14:09:27 [Information] Unable to read Patch Language value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch) This is probably because this key was not in prior patches.
2014-09-03 14:09:27 [Information] Unable to read Features value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch) This is probably because this key was not in prior patches.
2014-09-03 14:09:27 [Error] One or more errors were encountered retrieving the patch information from the registry: SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Information] Installer cleaning up and aborting.
2014-09-03 14:09:27 [Error] See the installer log for more detail.
2014-09-03 14:29:48 [Information] All modal messages are now closed.
can anyone help this?
Thanks in advance,

Hi Chintan,
I've already installed MR 8.5(1), but the error still occurs when installing MR 8.5(4)
The Log is :
2014-09-02 18:13:28 [Information] Logging initialized. Log File: C:\Temp\Maintenance Release ICM8.5(4)\20140902_181328_Maintenance Release ICM8.5(4).log
2014-09-02 18:13:28 [Information] Displaying new modal message, buffer empty: Initializing Patch Installer
2014-09-02 18:13:28 [Information] Manifest file location: C:\Users\ADMINI~1\AppData\Local\Temp\2\{0F8C826B-7BE2-4513-81D8-1C3FC1D25DD9}\{0202A80B-FA3B-48B1-A64F-62AD902E62F9}\PatchManifest.ini
2014-09-02 18:13:28 [Information] Patch Information folder is C:\icm\PatchInfo_ICM_8_5_4_0_0_0_336
2014-09-02 18:13:28 [Information] Initializing Version checking data structures with data from current system and patch.
2014-09-02 18:13:28 [Information] CloseWindow: Now in; Window=Cisco Unified ICM/Contact Center Enterprise & Hosted Installation
2014-09-02 18:13:28 [Information] All modal messages are now closed.
2014-09-02 18:13:28 [Information] Checking whether current installed patchs is the one this installer is attempting to remove.
2014-09-02 18:13:28 [Error] The latest installed patch ICM_8_5_1_0_0_0_465 does not match this uninstall program.
This later patch must be removed before this uninstall can be run.
2014-09-02 18:13:28 [Information] Installer cleaning up and aborting.
2014-09-02 18:13:28 [Error] See the installer log for more detail.
2014-09-02 18:13:53 [Information] Cleaned out modal message buffer and stack.
Then I uninstall the MR 8.5(1), then try to install MR 8.5(3),
I've successfully install the MR 8.5.(3), then I try to install the MR 8.5(4), but the error still occurs,
The Log is :
2014-09-02 19:19:26 [Information] Logging initialized. Log File: C:\Temp\Maintenance Release ICM8.5(4)\20140902_191926_Maintenance Release ICM8.5(4).log
2014-09-02 19:19:26 [Information] Displaying new modal message, buffer empty: Initializing Patch Installer
2014-09-02 19:19:26 [Information] Manifest file location: C:\Users\ADMINI~1\AppData\Local\Temp\2\{FF1FBA60-1E9C-4068-A0E0-0704D8C43A5F}\{0202A80B-FA3B-48B1-A64F-62AD902E62F9}\PatchManifest.ini
2014-09-02 19:19:26 [Information] Patch Information folder is C:\icm\PatchInfo_ICM_8_5_4_0_0_0_336
2014-09-02 19:19:26 [Information] Initializing Version checking data structures with data from current system and patch.
2014-09-02 19:19:26 [Information] CloseWindow: Now in; Window=Cisco Unified ICM/Contact Center Enterprise & Hosted Installation
2014-09-02 19:19:26 [Information] All modal messages are now closed.
2014-09-02 19:19:26 [Information] Checking whether current installed patchs is the one this installer is attempting to remove.
2014-09-02 19:19:26 [Error] The latest installed patch ICM_8_5_3_0_0_0_170 does not match this uninstall program.
This later patch must be removed before this uninstall can be run.
2014-09-02 19:19:26 [Information] Installer cleaning up and aborting.
2014-09-02 19:19:26 [Error] See the installer log for more detail.
2014-09-02 19:19:49 [Information] Cleaned out modal message buffer and stack.
I haven't try to install MR 8.5(2),
is it must to install 8.5(2) first to upgrade 8.5(4) ?
Thanks

Pre req for 11.5.9

Hi All,
Any kindly provide me the exact metalink id for pre req for 11.5.9 application in windows server
Thanks,
Rajesh P

Oracle Applications 11.5.9 Installation Update Notes for MS Windows - B10848-01 [ID 234782.1]
11.5.9 Installing Oracle Applications
http://docs.oracle.com/cd/B12190_11/current/acrobat/r1159ins.pdf
May I know what's the reason...IMPORTANT REMINDER: 11.5.9 Severity 1 Production Error Correction Support Ends June 30, 2011 [ID 1331433.1]
Lifetime Support Policy: Oracle Applications
http://www.oracle.com/us/support/library/lifetime-support-applications-069216.pdf
Thanks,
Hussein

What are the pre reqs to learn XI

Hi..
Can any one suggest me what all the pre req's that i need to learn so that i can learn XI. I am new to this field, so can any one suggest me how to start?
thank you.
kishore karnati

Kishore
If you know basic concepts of Java, ABAP and XML it would be a added advantage to learn and understand XI very quickly.
As you may XI is SAP's middleware solution, providing integration capabilities for SAP and non-SAP solutions alike. It is becoming increasingly important in any SAP implementation, mostly because it makes integration to SAP systems easy to implement. Also, SAP's newer solutions like SRM and MDM use XI's capabilities natively.
SO if you are interested in working with XI, that is agood thing. It is quite different from EP though, because EP is very user and front-end oriented, whereas a good XI implementation is invisible to the end-users.
An certification is a good thing to have, and XI is no different. But as in any other SAP solution, the certification is no substitute for hands-on experience on XI... which is what you must get as soon as you can.
new sap xi
NEW TO xi
When you have xi system practice this simple scenarios for starters:
Following are the links to weblogs which will help to develop the basic scenarios.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP
---Satish

Symbian S60 Maintenance Release not detected

Is it possible to use the S60 3rd edition SDK Maintenance Release with mobile packager? The SDK is installed in C:\Symbian\9.1\S60_3rd_MR and the device is called S60_3rd_MR:com.nokia.s60 - default. The Test Configuration tool does not detect the installation.

Hi,
The later releases of the SDK are not supported due to compatibility changes. S60 SDKs are backwards compatible, but not forwards compatible, which means that you would only be able to target later devices.
We choose to include devices like the N73 because there were some 10million of these in the market.
Mark

11.1.2.3 maintenance release pre-req step

Similar Messages

Maybe you are looking for