11.1.2 essbase upgrade not recognizing application files location

Hi all
I am upgrading an essbase database (Planning) from 11.1.1.3 to 11.1.2.2,
I trying to configure 2 essbase servers (original 11.1.1.3 and new 11.1.2) running on 1 physical server using different ports and filesystems
Following all the steps in the Deployment guide in Preparing Essbase Data for Upgrading,
I ran all the steps in the Manual file transfer instructions to copy from source machine to target machine.
I have started the steps in rehosting the essbase applications,
- Completed enable lookup by cluster name:
- I completed the server to cluster script on the HSS box (updateEssbaseServer )
when i went to run EssbaseUpdateEssbaseServer one of the planning databases did not update i got this error
[Mon May 21 14:03:50 2012]cphypd.sherwin.com///admin/Error(1002097)
Unable to load database [PlanFcst]
Error loading application = 1002097, continue...
looking in the logs i found that it was trying to go to the prior location of the 11.1.1.3 instance and not the new location of the 11.1.2 instance
Why is it not recognizing the new datafile locations

I saw this in the guide
I followed these instructions and specified a different directory when running the staging tool, the script was empty, i do not believe it should be, it should contain mapping info to update essbase.sec, which it did not
On the Configure Essbase Server page, for Full path to application location (ARBORPATH), specify the location of the existing or replicated Essbase data.
Note:
If you replicated data to a new machine, and if you selected Differently-named disk volumes, table spaces, or ARBORPATH on source and target or Consolidated disk volumes or tablespaces on target by exporting data during data replication, you must run a script immediately after configuring Essbase to update the Essbase security file to reflect the disk volumes on the upgraded system. The Essbase Staging Tool provides a script to update the settings in the security file (essbase.sec):
Start the Essbase Server and EPM System services. Navigate to ARBORPATH/app on the machine that is hosting the upgraded Essbase Server and run the following script using MaxL:
%ARBORPATH%/bin/startMaxl.bat -u userName editagtsec.msh
where userName is the Administrator user name to connect to the upgraded Essbase server. The script prompts you to enter the password.
Note:
editagtsec.msh could be empty in some scenarios. For example, when you launched the Staging Tool, the Staging Tool reports on existing volumes. If no volumes are listed, editagtsec.msh is empty.

Similar Messages

Ftp commands not recognizing local file locations

Hi folks. I'm trying to design an application (middleware) which takes advantage of the shell to send via ftp, a file to a remote server.
The login works, but it won't recognize a local path:
ftp -v -u "ftp://username:[email protected]/subdir1/" ///library/webserver/documents/domain1/alpha.txt
I have to have focus in the directory where the file is located in order for this to work:
cd /library/webserver/documents/domain1/
ftp -v -u "ftp://username:[email protected]/subdir1/" alpha.txt
But that adds another step to the process, and it doesn't do me any good.
Is there something I'm missing, or do I have to use that to provide focus in that command? I thought the command would have taken care of it.
Cheers

Yeah I have had that same problem. Now, I can't even connect to any ftp sever outside of the network (or maybe even not at all). I need help. No matter what I try, it won't work on my computer. I've used System Preferences, Safari, Finder, and even Terminal. The problem appears to be only on my computer, but similar problems like login problems have appeared every once in a while on computers in the same network as me.

When I plug my ipod touch into my PC, it is not recognized in file explorer

When I plug my ipod touch into my pc, it is not recognized in file explorer

It does (should) show up in Explorer on a PC. On a Mac it does not show up in Finder
Try:
iOS: Unable to import photos to computer
Have you installed any camera or scanning software?
If you have a camera, does the camera show when you connect to computer?

Lightroom 4.4 not recognizing RAW files from supported cameras

I started to get problems with Lightroom not recognizing RAW files from my Fuji XE-1 and Canon 5D Mark 3 cameras but I thought it was a problem with RC. After downloading some files today in 4.4 without a problem I encountered the same error message (unable to inport listed RAW files) again. The files open fine in Bridge. Any idea what is causing this problem?

Hi Geoff
I use a Mac with the latest version of Mountain Lion OS. The image files are being imported from the cards; in the case of the Fuji an SD card inserted in the card reader slot on the Mac and in the case of the Canon a CF flash card in a card reader attached to the Mac.
Appreciate any help you can provide.

Iphoto 11 is not recognizing jpeg files downloaded from camera and card reader. Nor will it allow me to transfer from image capture

iphoto 11 is not recognizing jpeg files from either the camera and card reader. Canon Eos rebel dig. Nor will it allow me to transfer images from image capture to iphoto. No problem downloading to image capture.

Sounds like a damaged card. Get your photos off the card with Image Capture and then reformat the card in the camera. Take some pictures and see if the card is recognized by iPhoto and the card reader.
OT

PS CS3 not recognizing Raw Files and converters Ive downloaded not working..Why not?

PS CS3 not recognizing Raw Files and converters Ive downloaded not working..Why not?

Do you seriously think we can answer that with zero information from you?
Please give us:
Operating System/version
Photoshop version number
Amount of RAM installed
Hard drive(s) free capacity
Video card make and model
Camera make and model
Then describe what you have done so far and the symptoms you are seeing.

ITunes not recognizing my files after move to new Powerbook

Just moved all my stuff over to my new computer (Powerbook G4) using migration assistant and while everything else seems to be working fine, iTunes is not recognizing the folder with all my songs in it, called "iTunes Music" in my iTunes folder in my Music directory. Any ideas why it's not being seen? I'd hate to import them, since I believe iTunes would be making copies of each song.
Thanks.

Thanks for your response. I'm on iTunes 4.7.1 on a new Powerbook G4 running OS 10.4. I was using a Powerbook G4 rental with OS 10.4.2 that I'm about to return. It's in the process of being zero'd out so I can't check the iTunes version but I think it was running iTunes 4.9, now that I think about it. I guess it was my mistake to think a brand new Powerbook would be running software more recent that a rental.
I didn't do any replacing of the music folder, since I used an automated "mover" program that ran when I first started this machine called "Migration Assistant" or something like that that did an amazing job of moving everything over from the rental to this new one. It was just like I was on the rental--my desktop, applications, dock, and everything else was set up the way it was before, with the exception, it seems, of iTunes.
iTunes started as if it were opening for the first time and looks that way. None of my songs show up, though they're in my user folder in Music > iTunes> iTunes Music, each album in a separate folder inside, including the albums I bought through iTunes. Still, no playlists or songs show within my iTunes application, nor does the "purchased music" category show up at all (typical, I guess, when it doesn't think you've yet purchased anything).
Also in my iTunes folder is:
- a file called iTunes 4 Music Library
- a file called iTunes Library
- a file called iTunes Library.xml
- a folder called Previous iTunes Libraries which contain an iTunes 3 Music Library and and iTunes 4 Music Library. Both of these are documents, not folders.
I'm hoping there's a way to trick iTunes into seeing this stuff, maybe moving everything out, upgrading and then moving them back in some way? Thanks for the help! Have a kids birthday party in a few hours and hoping to use my iTunes to make some playlists and maybe buy some more songs.
By the way, I have an iPod that I synched to the rental recently. Might be missing some playlists but all the music is on that, too.
Thanks!
Bob

Photoshop not recognizing PSD files

My PSD files are not being recognized. When I go to Properties and then Open With, and browse to the Photoshop application as usual, I am unable to select Photoshop as the program to open my file. I am completely baffled.
It looks like the Open With function is not recognizing PhotoShop, and I do not know if this is a Photoshop error or a Windows error.
Other Adobe programs are working and are recognized just fine. I am using Windows 7 and Photoshop CS4. I am running up-to-date Norton 360 so it is extremnely unliklely to be a virus.
Help please!

Sounds like a basic system problem, not a problem with Photoshop per se...
First, Photoshop should have installed itself so that it would automatically be in the list of programs available to open that file type.
Second, if it's not there by default, browsing to the Photoshop.exe file should make it work as you expect.
I've just opened a file from my desktop using Right Click, then Open With, and choosing Photoshop.exe as you have described. However, in my case Photoshop is already in the list of Recommended Programs.
Out of curiosity, do you see it in the list of "Other Programs" toward the bottom of the Open With dialog? You'll have to click on the little arrow to the right to see them.
-Noel

IPod classic - iPod and iTunes is not recognizing music files

Here's the problem I am having:
iPod is saying there is "no music" on the iPod. Yet, when you view the settings and files it shows there to be 70GB worth of data - that is how much music I have. iTunes is also not recognizing iPod either. I also get an error stating:
"iTunes cannot read the contents of __ iPod. Go to the summary tab in iPod preferences and click RESTORE to restore this iPod to it's factory settings". It's also not reading anything from the Music database.
This is the 2nd time I've had this error in the past two months. It happened in August - I noticed it had happened as I disconnected my iPod from my computer. The first time was when I tried to eject from iTunes. It said the files were currently in use by another program (I had nothing running, what program?), so I "safely removed" as I would a USB device. The 2nd time happened similarly, though not before iTunes locked up totally and would not let me eject from there. The last time I had this problem, I also removed each file/folder manually from iPod control, to hard drive, and restored iPod, and put them back on iPod. However, this time I am not so fortunate as it gives me an error when I attempt to copy stating either the "parameter is incorrect", or "cyclic redundancy error". Some of these files that are giving me this error at some point during the process have been accessible and working fine, and other times they are not, as I successfully copied five folders worth of data without error, then after I started getting errors with the next folders, attempted to copy one of the same folders into a different directory, which THEN gave me an error. I'm not sure what's going on here, but this is proving to be quite the pain and never experienced these problems with my 60GB iPod, which I did not take nearly as good of care as I have this one - and is still working with all of my original music on it.
My question is how do I solve any of these errors, and what would be the best course of action to take? I have a 160 GB Classic iPod. Warranty expired (probably) September, and purchased from Circuit City.
*I DO NOT wish to "Restore" unless absolutely necessary as I have 18,000 songs on my iPod. Restoring this would be cumbersome, and I keep my music on my iPod as I do NOT have the hard drive space to store it with*
Please help!
-dgo

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

DNG not recognizing NEF files

.I have Photoshop CS5 and I recently downloaded Adobe DNG Converter 7.1 to convert my NEF files so that I can open them in Camera RAW which was working for about a week, now it is not recognizing them. Any suggestions as to why?

I don't think you want to use the DNG converter on existing DNG files. You would want to use it on your original NEF files taken by your camera.
In the DNG converter, notice that the prompt is asking for the FOLDER that contains the raw files. Choose the folder, but don't double click on the folder. Don't expect to see your raw files listed. Just choose the FOLDER, and don't try to go any deeper. If you want to convert individual NEF files, drag/drop them onto the DNG converter icon. The program will open and will convert that one file.
Once you have chosen the folder containing your raw files, click on the convert button, and you will see each file listed as it is being converted.

Lightroom is not recognizing the files from my 7D mark II.

I just bought the Canon 7D mark II. I did a shoot Saturday and I'm trying to download the raw CR2 files into Lightroom. Lightroom is not recognizing them. What do I do?

anticandy wrote:
The other guy was a dick
Try to understand from another point of view:
Those of us who spend a lot of our time helping other users in this forum get mildly annoyed when another post comes up asking the same question just answered so many times.
I can see multiple posts with my eyes on the first page, and a search turns up multiple pages, so forgive me if I have a hard time believing you searched very hard (if at all).
So, I think the characterization as "dick" is unwarranted (not to mention vulgar & derogatory) - I answered your post, but did include a note of sarcasm and mild annoyance, which was my intent - I wasn't a dick, per se, but I'm glad the note of mile annoyance came through - consider practicing your search technique..
Rob

Automatic configuration URL syntax in 4.01 is not recognizing the file:///// syntax which use to work in 3.6.18. Is this a bug or an intentional change?

Hi, we noticed this difference today. We use a centralized PAC file located in a network share. This used to work for versions 3.5-3.6, it is not working for 4.01. Was this an intentional change or a bug?
The workstation running firefox is running windows 7.

thank you all.
Billy and William - what is rellay going on is that we have one cantrel pipelined function - not many.
we recently enctored a strange ora-600 that realte to it.
as a workaround we decide to rewrite the function,
and as a resolt to re-write some of the sql that use it.
and by doing so i notice that. (one can use a column as an argument).
i know that my last sql is invalid - i only though that the same must go
for pipelined function and the whole script show this line of thought.
SomeoneElse - you are right but it will give the same error even if i put data_numbers.id
Elic and William - thank you very much. now i am happay.
i search every document, expet from the sql manual (i looked at application dev, cartarige, etc).
this goes to show that every day I learn something new.
Amiel
re-reading the whole thared i realized that i wasn'nt
clear enough and the typo must have been confusing
i know that either:
select *
from data_numbers,
       (select g.id column_value
          from data_numbers g
         where g.id = data_numbers)
where id = column_value
   and id = 1;or
select *
from data_numbers,
       (select g.id column_value
          from data_numbers g
         where g.id = data_numbers.id)
where id = column_value
   and id = 1;don't suppose to work
(i ment to wrote the second sql...)
i was only concluding that the same goes for pipelind function.
Message was edited by:
Amiel D.

DW 8 not recognizing CSS file

Yesterday I went to create new pages on some of DW sites only
to find that the templates (on multiple sites) were not working
properly. It's obviously not recognizing the CSS file and looks
like hell inside of the program itself.
However, when I upload the page, even a new page, everything
works just fine. Makes no sense. No changes were made, yet it is
not recognizing anything. I'm having a low-to-medium sized freak
out here, so any help is appreciated.

VIEW | Style Rendering > Display Styles?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"RyanMoran" <[email protected]> wrote in
message
news:g4gp4q$hbh$[email protected]..
> Yesterday I went to create new pages on some of DW sites
only to find that
> the
> templates (on multiple sites) were not working properly.
It's obviously
> not
> recognizing the CSS file and looks like hell inside of
the program itself.
>
> However, when I upload the page, even a new page,
everything works just
> fine.
> Makes no sense. No changes were made, yet it is not
recognizing anything.
> I'm
> having a low-to-medium sized freak out here, so any help
is appreciated.
>

CS4 Premiere is not recognizing .vob files as supported

How do I get and what do I do to get CS4 Premiere to import a .vob file? ...it says it is not supported, but I know that it is. Need I do a wipe and re-install? I re-installed (over top) with no better success. ([email protected])

Not all vob files are created the same
Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549?tstart=0

Lightroom not recognizing RAW files from D750?

Photoshop has updated recognition of RAW files from the Nikon D750.Lightroom does not recognize these files. How do I obtain update for LIghtroom?

Thank you. Where do I find DNG converter 8.7 RC?
Lightroom is useless without ability to access RAW files. I don’t want to wait for 5.7
Thanks
Don

11.1.2 essbase upgrade not recognizing application files location

Similar Messages

Maybe you are looking for