11.1.2 Installation new setup??

Hello Guyz,
I would like to install EPM 11.1.2 on my machine which has Windows XP sp3,Ram 2GB, In C drive I have 22GB free space.
I want to emphasize on Essbase,Planning and HFM. So, can I install only those 3?
Please do provide me any installation links which can guide me through installation process.
Note: I don't have any EPM installations prior to this.
Thanks & regards

Hello Gurus,
I was trying to install Hyperion Essbase on my machine (which is on Windows XP Professional 2002 Service Pack 3).
It is is a 32-bit machine
I have enough space in my C:\
I have downloaded the following files into my machine and unzipped them with the help of PKZIP. I have unzipped all the files into one folder under C:\Temp\Hypersion Installation
Oracle Hyperion Enterprise Performance Management System Installer, Fusion Edition Release 11.1.1.3.0
Hyperion Enterprise Performance Management System Foundation Services Release 11.1.1.3.0 Part 1 of 4
Hyperion Enterprise Performance Management System Foundation Services Release 11.1.1.3.0 Part 2 of 4
Hyperion Enterprise Performance Management System Foundation Services Release 11.1.1.3.0 Part 3 of 4
Hyperion Enterprise Performance Management System Foundation Services Release 11.1.1.3.0 Part 4 of 4
Oracle Essbase Client Release 11.1.1.3.0
Oracle Essbase Server Release 11.1.1.3.0
I created an entry in the "hosts" under C:\WINDOWS\system32\drivers\etc (with the static IP of my wireless connection)
Then, I clicked on the "installtool.cmd" file. I could go till the "Progress Screen".
PROBLEM: The main problem is after waiting for few seconds, the system says "Installation is successful" - With a status of "FAILED" and the screen is automatically getting closed.
Not sure what the problem is.
Appreciate if someone can help.
Regards,
SN

Similar Messages

SAP Server Console - Inquiry on installation and setup

Hello,
I will be doing a setup of an SAP Server Console for the first time. It is necessary because we are moving all systems to a new data center. Based on my reading, the tool can be used to provide telnet and web access to an SAP system which I think is the main purpose why we have one.
In line with the installation and setup, I have the following questions:
1. In the installation guide, it mentioned that there are two ways of info exchange with SAPConsole namely via telnet and via web server. To confirm that what we have is info exchange via telnet, it is enough to check that sapcnsl command is executable and that we have georgiasoftworks installed in the server?
2. Also in the installation guide, it explained that SAPGUI on the machine where SAPConsole is installed is no longer necessary as of 7.10. How can I check the version where my SAPConsole is currently running on?
3. Since the setup that I'll do will be some sort of "migration", can anybody provide a checklist to ensure that the setup that I have with the old server will be exaclty the same as in the new one? I have read the installation guide for Standalone SAPConsole 7.10 and it does not show a backup/restore process. I am assuming that I will need to start from scratch but I am wondering if there's a procedure to make the "restore" to the new server seamless like making sure that the profiles that exist in the old server will exist in the new server after moving it.
4. Is there a different profile that is needed to access the configured system in SAPConsole? Or if you have SAP system access to the system, do you automatically have access to the same system via SAPConsole?
By the way, besides Standalone SAPConsole 7.10, I have already read SAP Notes 190005 and 1043241 as well. If there's any other useful note that you can recommend, I'll appreciate and take a look.
Thanks!

I think i have managed to get the answers for 1 and 2:
1. SAPConsole is only being used for RF guns therefore only for telnet connection
2. We are currently running on 640 which was delivered together with SAPGUI
Now, my main concern is #3 or on how to make all the settings the same in the new server for SAPConsole after moving it to a new hardware. I am thinking of some files/folders and registry entries.
Please advise.

New setup.exe for Adobe Acrobat 8.0 Pro

Per http://www.adobe.com/go/kb403246, there's a new setup.exe to let you install "all" updates to AAPro8.0 at initial install time.
Does this also include installing the Security Update 1 for 8.1.2, or, does that still have to be done separately?
Thanks.

Yes on both accounts. We're running Sophos and I've shut down the process that auto-starts and runs it in the background. The user herself is an administrator and I've tried both on her account and the root workstation administrator with no success.

HT1766 After restoring my iphone 4 to factory settings, then restoring from a recent backup, my phone will reboot but keeps coming back to the "new setup or restore from backup screen". How can I by-pass this screen to go directly to the sync apps/music s

After restoring my iphone 4 to factory settings, then restoring from a recent backup, my phone will reboot but keeps coming back to the "new setup or restore from backup screen". How can I by-pass this screen to go directly to the sync apps/music screen?

Well, it's certainly behaving as though the phone that was backed up was synced to a different iTunes library.
I'm going to throw one more thing out there... Yes, you backed it up to this computer... Was the phone previously set up to sync with this computer? Or was it syncing with a different computer and you just backed it up to this one?
You may have to end up setting it up as a new device and rebuilding the phone by manually re-syncing your data, apps, music, etc. to the phone.
Trying to keep your library on a different drive can be tricky. If iTunes starts up and the library isn't available, it may end up generating a new library ID, meaning that you could easily find yourself in exactly the position you're in now...
I'm curious why there was a need to restore your phone to begin with... It may not have any bearing on this at all, but it could.

3 posts in one on the Leopard "installation and setup" forum

I just posted a topic "Cannot disable trackpad pinch open & close" on the Leopard "installation and setup" forum and the topic was posted 3 times.
I first previewed my post, then posted the message from the preview pane. Interestingly, it took the forum server a very long time to display the preview pane ... and then a very long time (several minutes) to post the message after i clicked the post button.
I did not get impatient and click any buttons twice ... I just waited, and somehow the message got posted 3 times. I can believe I did something inadvertent on my end ... but impatiently hitting the preview and post buttons while waiting was not it.
If someone with power can remove 2 of the 3 repetitions, I'd appreciate it ... I couldn't figure out how to delete them myself

fiddleaway wrote:
Thanks. Is there a direct channel to the moderators anyone can use in circumstances like this?
This is it. The Feedback forum is the place to post requests for the Hosts.
I'd like to find out why my posting actions are generating multiple postings.
This has been happening to many people and as Terence mentions seems to be a fault in the forum software. Some have noticed that it occurs when there appears to be a server lag. That is, they'll click the button to post and there will be a long lag in response from the web site, and then even though they never clicked another button, several posts will appear.
It's not anything you did.

Need some help with this new setup I have

This is what I got for my new setup
A64 3000 939
K8N Neo4 Platinum MSI
1 gig of Mushkin duel chan. ddr 400
Gigabyte GeForce 6600 GT PCI-E
The ram I have is duel chan. I have no idea what this means Or what the ram needs to be set to is it faster than non duel ddr?

Quote from: igmox
it is like water flowing through two parallel pipes instead of one.
Quote from: mrbell84
Another example you could think of duel channel memory could be like a 2 lane motorway. You close one lane and cars can only go down 1 lane, but when you open another lane up thats another path for the cars to travel
Quote from: omnikron
One more thing is my psu going to be ok with that setup
Quote from: mrbell84
Yes your Power supply has 24 pin atx connector and also its a ATx2.0, which means its SLI/PCI-E Complient

HT1345 I have a new iPodtouch 5th generation. I currently have a 4th generation. Is there an easy way to transfer from one to the other or should I start a new setup?

I have a new iPodtouch 5th generation. I currently have a 4th generation. Is there an easy way to transfer from one to the other or should I start a new setup?

Click here and follow the instructions.
(95861)

OAS Installation and Setup Doc(s)

hello everybody,
i hope if someone can point to me a site i can get the Oracle Applications Server Installation and Setup Doc(s).
thanks

At the OTN site, click the documentation link on left frame. Here you can search for the particular documentation that you need and either print html or pdf format.
Sue

WVC54GC Installation and Setup files

I can't find the installation and setup files for WVC54GC version 1.1. The only files located on the download page is the firmware update and manual. But for WVC54GC version 1.0 the installation and setup files are available along with the manual and firmware update.
Should I assume that the version 1.0 installation and setup files will work with version 1.1?

If you can see the Setup wizard for WVC54GC v1.0, you can download and install it for the WVC54GC v1.1 from the Linksys/Cisco website or you can download it from the link: http://homesupport.cisco.com/en-us/support/cameras/WVC54GC

[Solved] installation and setup question - gummiboot and EFI

Hi,
This is the first time i'm installing arch. i hit the below issues. hope someone can help me out. my understanding of uefi is just about an hour worth of reading or less..
(the wiki didn't mention the kernel requirement when I started installing it... now it does and i updated the beginner's guide wiki post.)
Problem
Gummiboot#Installing says that "If you are still running kernel 3.7 or have not booted in EFI mode, creating the boot entry will fail. You should however still be able to boot gummiboot as it copies the binary to the default EFI binary location on your ESP (/boot/EFI/BOOT/BOOTX64.EFI on x64 systems). "
the gummiboot part fails. gummiboot gives this error at install saying file system is not FAT EFI, so first I got gummiboot and gummiboot-efi both using pacman. then, I provided the --path to install and now it coughs up because the latest iso isn't 3.8 yet.
Failed to access EFI variables. Is the "efivarfs" filesystem mounted?
I can see efivars but this is asking for efivarfs.
so instead I did,
# cp /usr/lib/gummiboot/gummibootx64.efi /boot/efi/EFI/gummiboot/gummiboot.efi
# efibootmgr -c -d /dev/sda -p 1 -w -L "Gummiboot" -l '\EFI\gummiboot\gummiboot.efi'
how do I set this up? I'm afraid if I overwrite /boot/efi/EFI/BOOT/BOOTX64.EFI windows might not boot.
after the installation (of course without gummiboot stuff) now when I reboot, I don't see any gummiboot menu at all because i didn't copy it to EFI/BOOT. it goes straight to windows 8 boot. during boot if I press F12 and see the menu option on thinkpad, I see gummiboot as the first entry(must be because of efibootmgr) followed by windows boot manager. When I select the gummiboot and enter, it just circles back to the same menu. I have setup the loader.conf and arch.conf as described in the wiki.
how do I set gummiboot to work? i dont mind pressing F12 and then going to gumiboot-> arch until 3.8 is out.
If this isn't possible, can I install rEFInd without messing gummiboot? looking at the dir structure of FAT EFI I think it should be possible but not 100% sure until i try it out. Also, to get rid of gummiboot, i should delete the directories, uninstall using pacman and get rid of the efibootmgr change I made, right?
Last edited by lobo2 (2013-03-15 04:07:47)

srs5694 wrote:
sidneyk wrote:Maybe not, I use rEFInd and mount ESP on /boot/efi and copy over updated kernels and initramfs. Maybe if you are mounting ESP at /boot the kernel and initramfs get written to both places at once, I don't know. I also don't know if /boot is where gummiboot expects them to be.
I realize this has been at least partially addressed by others, but I want to make two points very explicit:
In Linux, partitions (or more precisely, the filesystems that most of them contain) are accessed by mounting them at a mount point (a directory). Thus, when you mount the ESP at /boot, the contents of /boot are the ESP. Put another way, mounting the ESP at /boot means that to read or write the ESP, you read or write files and directories under /boot. You can test this yourself by mounting and unmounting a partition that's not basic to the minute-to-minute functioning of the computer. The ESP will actually work fine for this. Unmount it from /boot or /boot/efi and then issue a mount command to mount it elsewhere (say, "mount /dev/sda1 /mnt"). Then check the files under your temporary mount point, and even copy a file there. You can then unmount it and mount it back where you normally do and look for the file you copied -- it should be there. Play with this until you fully grok it.
Gummiboot runs before Linux, and it has no conception of Linux mount points. Thus, whether you mount the ESP at /boot, at /boot/efi, at /home/fred/abadmountpointforanesp is irrelevant, so long as the files on the ESP are laid out in the way that gummiboot expects. The trickiest aspect of this for those unfamiliar with the Linux mount system is that you do not include the Linux mount point in filename references for pre-boot programs like gummiboot. That is, if you mount the ESP at /boot and place the kernel at /boot/vmlinuz, then in gummiboot, the kernel would be \vmlinuz.
Yeah, I figured this out based on the OP's response to that and thinking it through, I just never really thought about it much before now. But I will argue that the mount point /boot and the EFI partition are indeed 2 different locations. I know that once the ESP is mounted at /boot that this distinction disappears until it is umounted and something written to /boot, but while mounted as such, /boot and ESP are virtually the same, at least to the Linux system. I realize the EFI programs are ran before any OS and therefore don't really care about any OS specifics.
I wonder if the OP has confused the info between gummiboot and rEFInd (possibly from the Beginners Guide) because to me, after reading the gummiboot wiki, it just seems that it would be much simpler to just give gummiboot what it wants, i.e. ESP mounted at /boot, whether it's a separate partion or not. I'll have to take a look again at the Beginners Guide to see again the order of things there, but if it isn't, maybe it should be having the user ensure that pacman has completely updated the new system and then go on to the boot loader specifics. I was just thinking though, that the way the install medium is now, that it was automatically pulling the latest stuff down as part of the install process. I know it's not pulling testing or multilib without user intervention, but the core, stable stuff it is. That seems to be part of the confusion here maybe, 2 different versions of gummiboot with gummiboot changing some things between the 2 and maybe the kernels, too.
[EDIT] I took another look at the Beginner's Guide and it says that most users will probably want to use the [core], [extra], and [community] repos, which are enabled by default. It goes on to recommend that [multilib] be enabled for users wanting to run 32 bit programs and then reminds you to run #pacman -Sy to update the package lists, but not #pacman -Syu which would apply any changes from the repos since starting the install. Shouldn't matter much, even if the [multilib] repo was enabled because at that point no 32 bit libs have been installed, but it would matter if a user decided to enable the testing repos.
I wouldn't ordinarily recommend it, but in this case, if the OP is comfortable with the risk, then it might be useful to, at least temporarily, enable the [testing] repo and do #pacman -Syu to pull in the 3.8 kernel. Note that this is likely to also pull in other packages from [testing], but if you haven't installed X yet or any desktop environment, then what is pulled in shouldn't be too overwhelming. He can then immediately go back and disable [testing] if desired. I'm currently using testing without any issues, but there are risks to doing so.
Last edited by sidneyk (2013-03-14 18:13:43)

FreeHand installation - New activation procedures

Take note that are new activation procedures for Macromedia software installation.
“When trying to activate your Creative Suite 2, Acrobat 7, or Macromedia products you may receive an error that the Activation server is unavailable. As of December 15th [2012] the activation servers for these products will be shut down.”
http://forums.adobe.com/thread/1114930
How to activate new installations of Macromedia branded products:
http://helpx.adobe.com/x-productkb/policy-pricing/macromedia-legacy-activation-error.html
Judy Arndt

Thanks for your fast answer.
I have not been able to run once the program. I installed it and when I lauched it I get a message saying that the Key Code is missing or has expirated (altough I just installed it!). Then I input the one I got in the installation pack and it says it is invalid.
I followed your instructions, but in the register there is no folder "Xcelsius".
On the contrary, I have seen that although I desinstalled the version Crystal Xcelsius Professional, I still have a folder with in the register (Suite 11.5 --> Crystal Xcelsius Professional) with the serial code from the previous version. And I also have a folder in c:\Program files\Business Objects... is this ok? Could it be the reason for the problems? Isnt't it removed when desinstalling Crystal Xcelsius Professional? Should I remove it manually?
Another thing: I already downloaded from your site the SP 1: cx2008_sp1
When running the Setup first it desinstalled Xcelsius Engage and then it installed the SP1, is this also ok? Seems a bit strange...
Thanks for your help!
Regards,
Nuria

New setup questions...

Hey Guys,
I'm moving to a new condo on 9/1 and getting Fios (switching from cable) for the first time. In the proverbial nutshell, what I want to do is this: run two HD TiVos (with cablecards), plus my Apple Time Capsule as my primary router. I don't care a bit about VOD or Verizon's channel guides, email, or any other silly thing they provide. An ISP is (or ought to be) just a 'dumb pipe'.
Having done some research online today, it seems as though I need to have my ONT set up to run Ethernet, not MOCA (coax). Is there anything else I've missed that I need to know?
Thanks! Any suggestions greatly appreciated... :-)
Regards,
Ken

You would want to have a CAT5 Cable run from the location where the ONT will be to where your Apple Router will be locatated.
Allow the FIOS Technician to install their Router and get everything up and running. Since you are not planning on using the Verizon Router the location should not mater. I would just have a CAT5 Patch cable available and ask them to use it to make the data conenction from the ONT to the Verizon Router.
Once the technician is done you can release the TCP/IP Address from teh Verizon Router, Power Down, Swap in your Router, and hopefully be all setup. Here is a FAQ with more information on using different routers:
http://www.dslreports.com/faq/verizonfios/3.0_Networking
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.
If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Migrating data to a "new" setup, questions

Hi fellow Archers,
This is my current setup:
Atom+ION board with 3 SATA ports + 1 PCI card with 2 SATA ports.
Storage:
2x 2TB
1x 1.5TB
1x 1TB
They are all part of the same vg:
[root@ion ~]# vgdisplay
--- Volume group ---
VG Name lvmvolume
System ID
Format lvm2
Metadata Areas 4
Metadata Sequence No 46
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 1
Open LV 1
Max PV 0
Cur PV 4
Act PV 4
VG Size 5.89 TiB
PE Size 4.00 MiB
Total PE 1544372
Alloc PE / Size 1544372 / 5.89 TiB
Free PE / Size 0 / 0
VG UUID E15rQM-mRJc-OLJH-C3Jo-NL6Y-g2ZQ-MP7PSz
I now have a new mainboard and a SATA controller card (PCI-E 1x) coming, with two new 2TB drives. Also a cheap small SSD on the way for the OS.
What I want to do: Migrate all data to a new RAID5 array consisting of 4x 2TB drives.
Is this possible without losing any data?
Thanks!

Shameless self-reply-bump;
I now have the new parts except the controller. When I get that I'm going to set up the new system, trying to migrate away all data off one 2TB drive so I can pull it out of the lvm volume group.
Then I can create a new RAID5 array with 2 new and 1 old 2TB drives and start moving the data to that one. When that's done, I'll move the other 2TB drive that was in the volume group, to the RAID5 array. That way I should end up with 4 2TB HDDs in RAID5.
I need to do some research first on what stripe size to use, filesystem, etc, as well as if it's best to have the HDDs on the controller (PCI-E 1x) or on the onboard SATA controller (which should be faster since it's not bottlenecked by the PCI-E 1x bus).
Thanks
Edit: New system installed, data migration ongoing. Managed to borrow a 2TB drive off a friend, migrated data to that so I could take one old 2TB out of the lvm, thus giving me 3 unused 2TB HDDs, on which I created a RAID5 array. Currently migrating data to it while it's initializing the parity etc...
[root@ion ~]# cat /proc/mdstat
Personalities : [raid1] [raid6] [raid5] [raid4] [raid0]
md0 : active raid5 sdc1[3] sdb1[1] sda1[0]
3907024640 blocks super 1.2 level 5, 128k chunk, algorithm 2 [3/2] [UU_]
[========>............] recovery = 42.6% (832443904/1953512320) finish=18091.5min speed=1032K/sec
unused devices: <none>
[root@ion ~]# df -h
Filesystem Size Used Avail Use% Mounted on
udev 10M 236K 9.8M 3% /dev
/dev/mapper/lvmsystem-root
20G 7.6G 12G 41% /
shm 881M 0 881M 0% /dev/shm
/dev/sdd1 97M 20M 73M 21% /boot
tmpfs 881M 11M 871M 2% /tmp
/dev/loop0 124M 27M 96M 22% /var/lib/pacman
/dev/mapper/lvmvolume-home
5.8T 4.7T 1.2T 81% /home
/dev/mapper/lvstorage-storage
3.6T 2.1T 1.6T 57% /raid5volume
Edit: BEWARE!!
sata_mv: Highpoint RocketRAID BIOS CORRUPTS DATA on all attached drives, regardless of if/how they are configured. BEWARE!
sata_mv: For data safety, do not use sectors 8-9 on "Legacy" drives, and avoid the final two gigabytes on all RocketRAID BIOS initialized drives.
That was the culprit! I shrunk the device usage per partition like so:
Avail Dev Size : 3907025072 (1863.01 GiB 2000.40 GB)
Array Size : 11702108160 (5580.00 GiB 5991.48 GB)
Used Dev Size : 3900702720 (1860.00 GiB 1997.16 GB)
So it's using 1860 out of 1863 or so GB per partition, that way I should be safe corruption wise. It would be best to shrink the actual partitions (sd[b,c,d,g]1), but I don't know how to do that without messing everything up.
Last edited by Fackamato (2010-10-24 17:14:44)

On a new setup I get error message "'could not activate this table (3001)''

Hi,
I am busy setting up my new playbook and get an error message on the software update screen: "'could not activate this table (3001)'' please try changing your settings.
What settings am I meant to change?
There is a button for settings and when I press this, the playbook takes me back to the connect to WI-FI screen. The WI-FI screen shows that I am currently connected. When I click on hotspot setup, the screen comes back and says I am already connected to the internet.
Can anybody please assist me to complete my setup so that I can start using the playbook?
Looking forward to your feedback
Thanks a stax

Or, you can find a local UNsecured hotspot not requiring a login or password. Like a McDonalds.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

"Template import error: No VM configure file found" on brand new setup

Previously, I posted Console does not launch OVM 3.1.1, Win7x32 Firefox15/IE8 - Empty .jnlp file which was about VM Console not launching. Since this is a new installation, and it seemed to be a unique problem, I scratched the whole installation and started again from scratch. Everything, including the NFS file server, was re-installed from scratch CD OS installation.
The process is pretty straightforward once you're used to it, and in less than three hours I was ready again to import my first template (a template I had imported before). But now, I submit the the request, and almost immediately the process aborts. (You can see in the information below, that 1 second passes between the Import request (06:32:36) and the failure.)
Thing is, it takes about three minutes, even locally on the web server, to get an index of that large file (tar tzf), and at completion, the vm config file is listed.
Am I misreading the error? My web searches for enlightenment found only one good hit on this error, and in that case it appeared to be an "out of space" issue. In this case, though, I'm importing a 5GB tarfile into a 390GB, otherwise-empty file system, so I don't think that is the issue. The failure in ovs-agent.log is below. What other information may I provide to get to the bottom of this? (Thanks for any guidance/help, of course!)
[2012-10-31 06:31:40 3341] DEBUG (monitor:36) Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:40 3341] INFO (notification:67) Notification sent: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:40 3338] INFO (notification:193) Sending notification: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:48 4914] DEBUG (service:77) discover_cluster: ()
[2012-10-31 06:31:48 4914] DEBUG (service:85) discover_cluster: call completed.
[2012-10-31 06:32:03 4926] DEBUG (service:77) storage_plugin_mount: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, {'status': '', 'uuid': 'fc3564eb-ce8b-489c-96bc-df6de2cc8a11', 'ss_uuid': '0004fb00000900003cf41964f3476788', 'size': '330279518208', 'free_sz': '330075340800', 'state': 2, 'access_grp_names': [], 'access_path': 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', 'name': 'nfs:/mnt/ps_big/repo/repo'}, '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55', None, True, [])
[2012-10-31 06:32:03 4926] INFO (storageplugin:108) storage_plugin_mount(oracle.generic.NFSPlugin.GenericNFSPlugin)
[2012-10-31 06:32:03 4926] DEBUG (NFSPlugin:353) cmd = ['mount', '-t', 'nfs', 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55']
[2012-10-31 06:32:03 4926] DEBUG (service:85) storage_plugin_mount: call completed.
[2012-10-31 06:32:03 4931] DEBUG (service:77) add_repository: ('filesrv.ps.***.com:/mnt/ps_big/repo/repo', '0004fb0000030000659e0ce6f2ecfb55')
[2012-10-31 06:32:03 4931] DEBUG (service:85) add_repository: call completed.
[2012-10-31 06:32:36 4972] DEBUG (linux:847) async call function: import_template
[2012-10-31 06:32:36 4975] DEBUG (service:77) import_template: ('0004fb0000030000659e0ce6f2ecfb55', '0004fb0000140000fdc18a572a244015', ['http://aspire/pstop/OVM_EL5U7_X86_64_TOOLS8_52_06_PVM.tgz'])
[2012-10-31 06:32:37 4975] INFO (notification:74) async_proc_prog: notification {ASYNC_PROC} progress PID 4975 status {'OBJECT': 'template', 'TOTAL_OBJECT_COUNT': 1, 'CURRENT_OBJECT_COUNT': 1, 'TOTAL_BYTES': 0L, 'CURRENT_BYTES': 613L, 'OPERATION': 'download'}
[2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} progress PID 4975
[2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} progress PID 4975
[2012-10-31 06:32:37 4975] ERROR (service:96) catch_error: Template import error: No VM configure file found.
Traceback (most recent call last):
File "/usr/lib64/python2.4/site-packages/agent/service.py", line 94, in wrapper
return func(*args)
File "/usr/lib64/python2.4/site-packages/agent/hypervisor/xenxm.py", line 1041, in import_template
raise RuntimeError('Template import error: %s' % err)
RuntimeError: Template import error: No VM configure file found.
[2012-10-31 06:32:37 4975] DEBUG (linux:879) ovs_async_proc: pid 4975 status 1 output Template import error: No VM configure file found.
[2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} exit PID 4975
[2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} exit PID 4975
[2012-10-31 06:32:39 4987] DEBUG (service:77) storage_plugin_listFileSystems: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, True)
[2012-10-31 06:32:39 4987] INFO (storageplugin:108) storage_plugin_listFileSystems(oracle.generic.NFSPlugin.GenericNFSPlugin)
[2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:142) ENTER: listFileSysytems()
[2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:257) EXIT : listFileSysytems()
[2012-10-31 06:32:39 4987] DEBUG (service:85) storage_plugin_listFileSystems: call completed.
[2012-10-31 06:32:39 5005] DEBUG (service:77) discover_pool_filesystem: ()
[2012-10-31 06:32:39 5005] DEBUG (service:85) discover_pool_filesystem: call completed.

How did you get the template to where you staged it?
I'd say the template is corrupt or you only have a partial template.
I did notice the call to the template is based on the short name of the host. Can you confirm the VM manager can access the http path via short name?

11.1.2 Installation new setup??

Similar Messages

Maybe you are looking for