11.2.3a - Unable to edit exsisting xp user policies

Maybe I could get some help here. I am currently unable to edit XP group user policies from my zenworks 11.2.3a zone. All policies were "minted" uner the 11.2.2 version. I was able to edit policies no problem before the 11.2.3a Update. All machines have the 11.2.3a Group Policy helper activeX control installed on them (Fresh images not upgrades). Here are the problems I am having
1. When the group policy editor opens, all my policies are set to "Not Configured", even though these are active working policies with many items configured
2. Once in a ten or so tries, the group policy editor opens the ADM's correctly. I am able to configure the needed settings. The group Policy editor closes and echoes back theat the "Settings were successfully imported". The problem here is that the "upload button" stays dimmed out and I am unable to uplaed the configured policy.
Not really to sure what is going on.

mdymes wrote:
>
> Maybe I could get some help here. I am currently unable to edit XP
> group user policies from my zenworks 11.2.3a zone. All policies were
> "minted" uner the 11.2.2 version. I was able to edit policies no
> problem before the 11.2.3a Update. All machines have the 11.2.3a
> Group Policy helper activeX control installed on them (Fresh images
> not upgrades). Here are the problems I am having
>
> 1. When the group policy editor opens, all my policies are set to
> "Not Configured", even though these are active working policies with
> many items configured
>
> 2. Once in a ten or so tries, the group policy editor opens the ADM's
> correctly. I am able to configure the needed settings. The group
> Policy editor closes and echoes back theat the "Settings were
> successfully imported". The problem here is that the "upload button"
> stays dimmed out and I am unable to uplaed the configured policy.
>
> Not really to sure what is going on.
I've seen something like this in earlier versions as well - in my case
it was the version of the browser I used and the security settings of
this. What browser do you use?
Do you see the same if you use the ZCC from antoher server?
Niels
A true red devil...

Similar Messages

Unable to edit the forms in Adobe Acrobat 9 Pro and adobe pdf reader.

Hai ,
i am unable to edit pdf forms . on clicking on the form text field error message comes as "font capture" message heading and content as
"C:\Windows\system32/ATMLIB.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support."
if pressed ok . aplication get closed
i reinstalled all aplication with old versions but sill have the same error .please give a solution . thank you.

thank you for the suggestion, but I do not have a "Send Email" or "Submit" button available in my version. I have "Attach to email" option which automatically opens a new message in MS outlook (which I did not set up, it just started doing so automatically) without any further dialogue boxes or options.
Also, this is only for regular PDF files, not forms.

I am unable to edit an image in Photoshop.

I just installed Lightroom 5.3, and I have Photoshop CS5.1 installed. The problem is that I am unable to edit an image in Photoshop. When I click Photo>Edit In, the option for Photoshop is not active (i.e., it's not black), so I can't click on it. Why are the options for Photoshop and all of the other Photoshop related options, such as Merge to Panorama, etc., not active? In Preferences I have the following settings: File Format = TIFF; Color Space = ProPhotoRGB; Bit Depth = 16 bits; Resolution = 240; Compression = None. I am using Windows 7.

Chris:
I have to apologize for being misleading on my request for help in
resolving the problem.
Actually the version I am using is CS2 not CS3.
Yesterday I tried numerous times, and ways, to edit an image and each time
it refused to allow me to save it.
The software program just shut down. This evening when I decided to give it
another try it worked perfect.
Guess the program just took the day off.
Thank you for offering to help
Regards,
Doug

Function Module "RSDRD_SEL_DELETION" / Unable to edit selection

Dear experts,
I am currently working on FM "RSDRD_SEL_DELETION". I am testing it in SE37.
However, when I try to enter selection I_THX_SEL, it tells me:
Unable to edit the object
Message no. MO704
Diagnosis
You tried to edit an object that cannot currently be edited using the editor for complex objects. Possible causes:
The object is an object reference
The object is a hashed table
The object list a string
The object has the type REF TO DATA
The object contains object references
The object contains hashed tables
The object is a string
The object contains strings
A subcomponent of the object has a width that exceeds 65,000 characters.
Can anyone tell me how to make it work?

Sorry! The code was meant only as example, as I would convert it. The names of the infoObjects are naturally differently. It concerns to me rather the understanding whether the data records are deleted individually in each case. Or all those the conditions of NUMBER fulfill and all those the conditions of DATE fulfill. I would like to delete however only the data records, which fulfill these conditions together.

WebElements - Unable to edit WEPlatform

Hi,
I am new to WebElements and wanted to have a look at the functions to see how I can use in my reporting suite.
I am using CR11 and seem to be unable to edit the WEPlatform element to select the Crystal Reports version that I use.
I notice when I open the WebElements 246.rpt that it advises me that the report was written in a later version of Crystal.
Is this why I cannot edit the WEPlatform element ? If so how can I obtain a version of the web elements thjat will work with my Crystal version ?
Any help will be great.
Cheers,
Matt

hi Matt,
the users guide isn't really clear on this...i will make sure that this gets changed for the next release.
as webelements are Custom Functions you have to disconnect them from your repository to edit them. if you right click on the platform function and choose disconnect from repository then you can edit the function to match your platform.
once you've changed the function, you can add it back into your repository overwriting the existing one...that way when you build a new report using webelements you don't have to keep changing the platform function each time.
jamie

User unable to edit contacts

I have a user with Outlook 2013 connected to an 2010 Exchange Server. I have a user that is unable to edit any existing contact, getting an error: Your changes cannot be saved because you don't have permission to modify some or all of the items in this folder.
Do you want to save a copy of this item in the default folder for the item?
I have checked the permissions on the mailbox folder as well as the Contacts folder. The user has "Owner" permission to these folders.
No other users report the problem, and loading the users account on another computer demonstrates the same problem.
Any ideas what I am missing?

Hi,
The error indicates that the issue is related to permission. I recommend you use the Get-MailboxPermission -Identity xxx |fl cmdlet to check if the permission is right. What's more, please check if OWA has the same issue.
If the issue persists, I recommend you remove the owner permission at first. Secondly, use the following cmdlet to add the owner permission and check the result.
Add-MailboxPermission -Identity "xxx" -Owner "xxx"
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Lync 2013 client - part of Office 2013 Pro Plus - unable to edit or remove picture, option is grayed out.

Hi Team,
Lync 2013 client - part of Office 2013 Pro Plus - unable to edit or remove picture, option is grayed out.
Using Exchange 2010 Server and Lync 2010 Server at the back. To the best of my knowledge, this option is only available when using Exchange 2013 rather than Ex 2010.
Can somebody confirm this as I am not 100% sure about it.
Appreciate your help. Thanks
Muhammad Nadeem Ahmed Sr System Support Engineer Premier Systems (Pvt) Ltd T. +9221-2429051 Ext-226 F. +9221-2428777 M. +92300-8262627 Web. www.premier.com.pk

Hi,
The photo precedence in Lync 2013 is high-resolution photo from Exchange 2013 -> Photo from web address -> Active Directory photo. The "Edit or Remove Picture" button is available if you integrate Lync Server 2013 with Exchange 2013.
Since you are Lync server 2010 and Exchange 2010, you can choose the following two options:
The thumbnailPhoto attribute on the user's object in Active Directory Domain Services
A URL configured by the user
More details:
http://blogs.technet.com/b/nexthop/archive/2010/11/22/microsoft-lync-2010-photo-experience.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Unable to edit

I am a complete novice to Dreamweaver so please bear with me.
I am trying to edit some pages (.php files) for my employer. I was
able to edit the index.php file but none of the others. All of the
html code is greyed out except certain areas and unfortunately, the
part I need to change is greyed out. I am completely unable to edit
any of the greyed areas. I've looked all over to see if there's a
way to unlock the code but I can't see anything. Does anyone have
any suggestions?

If you do not have the associated Template file, it *MAY* be
a trivial
matter to recreate it. We would need to see the code on the
page to know
whether that's possible, though.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Osgood" <[email protected]> wrote in
message
news:gecgtk$4g2$[email protected]..
> This sounds as though the page has been made form a
Dreamweaver template.
> Do you have a template folder in the site root folder at
all with a file
> named .dwt in it?
>
> You can unlock the greyed out area of a page by opening
it and
> going>Modify>Templates>Detach Template.
WARNING! WARNING! Doing this may
> help you in the short term but once detached if anyone
updates the
> original .dwt template file the changes WILL NOT
propagate to those pages
> that have been detached from the template.
>
> First look for the .dwt file. It should be in the site
root folder in a
> folder named Templates. Open it if you can find it and
make the changes
> there. All changes made, once saved, will propagate to
all pages in the
> site made from the template.
>
>
>
> gwnyvere wrote:
>> I am a complete novice to Dreamweaver so please bear
with me. I am
>> trying to edit some pages (.php files) for my
employer. I was able to
>> edit the index.php file but none of the others. All
of the html code is
>> greyed out except certain areas and unfortunately,
the part I need to
>> change is greyed out. I am completely unable to edit
any of the greyed
>> areas. I've looked all over to see if there's a way
to unlock the code
>> but I can't see anything. Does anyone have any
suggestions?
>>

Unable to edit document using "Edit with Word" option

Hi All,
i am having an issue with Office web apps. i am using SharePoint 2013 and Office web apps 2013. all the configurations have been done successfully. but i have a different kind of issue.
i am able to open documents in browser
i am able to edit document using " edit with word/excel web" option
but i am unable to edit document using "edit with word/excel" option
i have Office 2010 installed on my local machine.
do we need to have MS office of 2013 version? or is there anything missing from configuration part.
Please help me.
Thank You,
Bhaskar.

Hi,
According to your post, my understanding is that you could not use the "edit with word/excel" option.
I had tested the issue with the Office 2010, the option worked well.
You don’t need to install the Office 2013 to use this option.
What did you mean “but i am unable to edit document using "edit with word/excel" option
Did you mean the option gray out? Did the issue occur in other browsers?
You can use compatibility mode to check whether it works.
Open IE->Tools->Compatibility View Settings
You can also add the site into Trusted sites.
Open the IE->Internet Options->Security->Sites->add the site into the Websites, then check whether it works.
What's more, you can also use other browsers to check whether it works, such as Firefox, Chrome.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Unable to edit ftpoutboundheader or fileadpateroutboundheader

Hi,
I am new bie to oracle soa suite. I was doing an excesise on file and ftp adapters.
As part of the excersise I have to edit the outbound header properties of the generated wsdl. I am unable to edit the headers.
1) Can we edit the headers generated by file/ftp adapter wizards ?
My SOA Suite: is of 10.1.3.4
Jdev version is 10.1.3.3
Thanks,
Arjun.

Try this blog
http://middleware1.wordpress.com/category/adapters/page/2/
cheers
James

Unable to edit html file

Hi,
I downloaded an html file from our server to edit the logo. However, I am unable to edit the logo part. It's like commented out. And once I opened the file on Dreamweaver CS5, I am getting this pop-up message:
"This page contains some SWF objects that may not work properly in the most recent versions of Internet Explorer. Dreamweaver cannot convert them to the new SWF markups. Please delete each of them and insert again."
I can't edit the html file and change the logo. Please help.
Thank you and God bless!
Dannie

Dannie,
Are you familiar with dreamweaver templates and editable regions? If the logo is in the template, then you need to modify the template file. The changes you make to the template will automatically be propogated to all of the files which use the template. If your html file uses a template, the html code will look like its commented out.
Also, you should not have to download the html fiile from your server because you should always keep a copy of all the html files on your computer.
I don't know about the SWF error.
Good luck.
mitzy_kitty

Unable to edit or add in contacts list ?

Why am I unable to add or edit in my contacts list ? Will I need to back up on desktop manager, wipe phone and start over?

icallem1 wrote:
Why am I unable to add or edit in my contacts list ? Will I need to back up on desktop manager, wipe phone and start over?
Hi icallem1,
Unable to edit or create new contacts on the BlackBerry Address Book
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

Unable to edit the fields in PDF interactive form

Hi,
We are in the process of developing an interactive form integrating Web Dynpro ABAP with Adobe forms.
As of now we are able to send the data to Adobe form from Web Dynpro.
But we are facing the following problem.
i) Unable to edit the form data for entering/changing the contents of the fields in PDF document, which is presented to user with a Web Dynpro application URL.
We have already unset the 'ReadOnly' property of the interactive UI element.
We are currently working on ZCI installation with SAP SP08, GUI patch level 20, Adobe Reader version 8.0
Please advise...
Thanks,
Satya.

Hi,
Check your ADS settings, I feel it's due to lack of some config in ADS only.
Regards
Raja Sekhar

Unable to edit track info in iTunes on a Mac Air

Hello,
I recently switched from a windows PC to a Mac Air. All my music was organizaed on an external hard drive. I have now imported the music in to my iTunes on my Mac Air. I am unable to edit individual track info when I use "Get Info". I tried to look up for permissions on the particular folder and found that they are all set as "Read Only".
Any help in this matter is appreciated.

Go to your Music (media) folder. The one that holds the actual files.
Click it and press Cmd+I or right click and select "Get Info"
In the Info pane, click the lock to change permissions:
You'll need to tnter your password to make any chnages.
Set ALL permissions to Read & Write
Click the Gear and select "Apply to enclosed items..."
Then click "OK" when asked if you're sure.
Let it apply to everything and THEN try editing the track oinfo.

Unable to Edit Price Lists in Advanced Pricing Vision Instance

Hello I have a new Vision Instance for 12.1.3 and when I switch responsibility to Oracle Pricing Manager Vision Operations I am unable to edit and of the price lists or modifiers that are in the system by default. any suggestions on what I need to update as I have not run into this before in previous Vision instances

this was the solution to this issue
Solution
1. Be sure to set the following profile option values at user level
a. QP: Pricing Transaction Entity = ORDFUL and save.
b. QP: Source System Code to 'Oracle Pricing' (if not already) and save.
2. Responsibility: Order Management Super User (or equivalent)
3. Navigation: Pricing > Price Lists > Price List Setup
4. Open the price list: XYZ CHARGES
5. The form will now open without error, and changes will be accepted

11.2.3a - Unable to edit exsisting xp user policies

Similar Messages

Maybe you are looking for