11.2 (64bit) Window 7 install

I've just downloaded the lasted 64 bit windows files. When I go to install and get the the database configuration assistant, I cannot add the Oracle Text feature to be installed.
How can I get Oracle Text to install ?
Thanks
Brendan

Pl indicate which version of Win 7 - you will need Professional or higher - http://download.oracle.com/docs/cd/E11882_01/install.112/e16773/reqs.htm#CHDHGGFE
Oracle Text is included in the install - have you actually created a database using DBCA ? If so, pl post the output of SELECT * FROM V$OPTION.
HTH
Srini

Similar Messages

  • Ever since installing on my 64bit Windows 7 install, Firefox has continually gotten more sluggish as time moves on, hangs for 10-15 secs at a time and just gets worse over time with the updates and everything.

    Ever since installing on my 64bit Windows 7 install, Firefox has continually gotten more sluggish as time moves on, hangs for 10-15 secs at a time and just gets worse over time with the updates and everything. It was fast when I first installed, but over the last six mos has slown to a crawl.

    upgrade your browser to Firefox 8 and try
    * getfirefox.com

  • I have 64bit windows and install proper one for windows and get error saying wron i tunes and to reinstall the right one

    i cant get itunes to install also get error after 1 use that itunes does not work again

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
    tt2

  • ITunes 64bit windows 7 installed but won't work

    I've tried the installation 3 times and still I get this message upon opening:
    Installed itunes for 64 bit windows 7 as instructed.
    Installation successful, but upon opening itunes, I get this message:
    Problem signature:
      Problem Event Name:    BEX
      Application Name:    iTunes.exe
      Application Version:    10.3.1.55
      Application Timestamp:    4deec351
      Fault Module Name:    MSVCR80.dll_unloaded
      Fault Module Version:    0.0.0.0
      Fault Module Timestamp:    4dcddbf3
      Exception Offset:    72c129e1
      Exception Code:    c0000005
      Exception Data:    00000008
      OS Version:    6.1.7600.2.0.0.768.3
      Locale ID:    1033
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
    I've uninstalled and installed 3 times and get the same problem.
    Please advise!

    Question answered by "Toonz" in another thread

  • Windows 7 64bit would not install on bootcamp partition

    I have a Windows 7 64bit ISO. I inserted a 8GB usb stick into my New Retina MacBook Pro and ran the Boot Camp to install Windows 7 bootable from the USB stick. It all went fine, booted into Windows install, and when I had to select a partition, I selected the only one that said BOOTCAMP and was 40GB, just as I created it earlier when creating a partition size compared to the total disk. I selected the partition and as I could not select next, I selected to format the 40GB Bootcamp partition. It didnt take long, but afterwards, when I clicked next, it showed up an error about not being able to use the partition or something, I cant fully remember.
    But now my OSX will not boot. When I turn off the computer by holding down the power button, it turns off, and then when I hold down the power button to turn it back on it does the grey screen part, and then shows a black screen and shows:
    No bootable device -- insert boot disk and press any key
    What do I do here?

    Hold the option/alt key down on a wired or built in keyboard and boot the machine, you enter Startup Manager and thus can get into OS X.
    Next, when your installing Windows, you first have to format the internal Bootcamp partition from the FAT32(MSDOS Apple calls it) to NTFS while booted from the Windows 7 install disk, THEN you can install Windows and it takes a lot longer than a few seconds.
    Read the BootCamp manual, there is also drivers you have to install into Windows
    https://www.apple.com/support/bootcamp/
    Windows in BootCamp or Virtual Machine?
    Once you get it up, learn how to clone OS X and Windows Bootcamp
    Most commonly used backup methods

  • WIndows 8.1 64bit, Windows Installers stalls with any install, updates or third party programs.

    WIndows 8.1 64bit, Windows Installers stalls with any install, updates or third party programs. Third party program installations work if I restart in safe mode. Updates don't as they cannot be installed in safe mode and require normal mode.
    Been happening for months now. Some installations after a long time finally proceed, others dont. 
    Already trying uninstalling antivirus (Bitdefender) with no result.
    Thanks

    Hi,
    Could you check this issue under clean boot?
    Also try this fix tool it repair corrupted registry keys.
    https://support.microsoft.com/en-us/mats/program_install_and_uninstall
    Regards,
    D. Wu
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

    When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

    You can try downloading the 64 bit version.  You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

  • I am unable to access my LR5.7 Catalog of my recent holiday. I am running Windows 7 (64Bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot be opened because another application already has it opened.Quit the

    I am unable to access my LR5.7 Catalog of my recent holiday. I am running Windows 7 (64Bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot be opened because another application already has it opened.Quit the other copy of Lightroom before trying to launch"  The problem is, that I can only see one copy of LR5 open and cannot locate the ".lrcat.lock" file for the specific catalog I want to open. I have tried re-booting my computer, but this did not work.

    Thanks Geoff. I was finally able to locate the ".lrcat.lock" file relevant to the catalog I want to open. Once I deleted it, LR5 was able to access my images. Problem solved. THANK YOU

  • When i want to install iTunes, it show that Gathering Qiucktime information...Please helppp me i need iTunes to sync my apple devices, i have 64bit windows

    When i want to install iTunes, it show that Gathering Qiucktime information...Please helppp me i need iTunes to sync my apple devices, i have 64bit windows.Thanks

    You are probably running OS 10.4 or 10.5 on a PPC Mac.  No version of  iTunes higher than 10.6.3 is available for these older Macs.  I have the same problem, and while I can still use the PPC to sync my iPod, it can't be used to sync an iPhone 4 or higher.  The only solution, as I discovered after upgrading to the iPhone 4, is to buy a newer Mac.  I was able to get a 2006 MacBook running Lion for under $300, and that has been a lifesaver.

  • Capitvate 8 for 64bit windows downloaded, but "install now" button in akamai downloader has no effect. How to install?

    Capitvate 8 for 64bit windows downloaded, but "install now" button in akamai downloader has no effect. How to install?

    check your computer or, if you don't know how to search for files, redownlload:
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
    window using the Lightroom 3 link to see those 'Important Instructions'.

  • Can't install itunes on my 64bit windows 7 laptop

    Can't install itunes on my 64bit windows 7 laptop. Says there was a problem with the windows installer package and a program required for this install to complete could not be run..
    I have uninstalled and re-installed several times now already using the add/ remove programs under control panel..

    Let's try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • How to install 64bit Windows 7?

    Related to my other thread but a separate question (if I could delete the other thread now I would).
    My question is:
    How can I install Windows 7 64bit on my new 27"iMac with pre-installed snow leopard 10.6.2?
    What I have tried so far:
    Tried to install 64bit Windows 7 using bootcamp. After the computer restarted itself a couple of times during the installation I got the black screen of death. I eventually had to force shut down and when restarted it said 'windows was not shut down properly'. I tried to start windows in normal mode but it didn't work (black screen of death again) I then tried to boot in safe mode but that didn't work either, the error message said it couldn't boot in safe mode and needed to restart. Went round the same cycle a couple of times but eventually I just had to hold the option key down to choose to boot from macos.
    Thanks in advance.

    Here is the apple thread that i used to get past the "black screen of death".
    http://discussions.apple.com/thread.jspa?threadID=2207823&tstart=0
    Specificly what mpuck972 says. He gives a link for the how to and he tells you what ati file you will have to delete, as the link gives you the nvidia file, which is wrong for the 27" iMac. As for the mouse and keyboard, when i first did windows 7 i had a wired keyboard and installed bootcamp 3.0, after that the keyboard and magic mouse worked fine in both windows and OSX, Its the same bluetooth chip so you shouldn't have to re-register them in either system. the only thing is you have to click the mouse once to get it to turn on in windows 7. I hop this is helpful.
    P.S. in windows 7 after you get it installed there is an updated display driver available through Windows update that will give you the correct resolution, however don't do anything in fullscreen mode in windows 7 as on occasion when yo exit your video or game from full screen the screen becomes "cut" in which the top 1/4 of the screen is at the bottom, but this is fixed by a simple restart.

  • Help with install 64bit windows 7 on ssd step by step for HP Compaq 6910P?

    Could you help me how to install 64bit windows 7 on a ssd step by step for HP Compaq 6910P? Any drivers for the notebook?
    Thanks in advance.
    This question was solved.
    View Solution.

    Hi,
    Full list of drivers is in the following link:
       http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3357378&lang=en&cc=us...
    The following instructions may help:
       http://www.pcworld.com/article/192930/how_to_upgrade_your_laptop_hard_drive_to_an_ssd.html
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Bootcamp 3.1 and imac windows 7 64bit update not installing. Audio issues!

    After many days of work getting the windows 7 working in bootcamp in my imac 27 (still with audio issues) I eagerly awaited the bootcamp update and imac updates.
    Neither will install.
    Then I find that according to tech support as of now I have to reinstall Windows 7 again for the updates to work!
    It took me 5 full 8 hours days to get all my scientific programs installed and working, now I find I can't even simply update the drivers I need. I don't want to reinstall.
    My only issues are audio.
    Here they are:
    1) The headset jack works fine on the Mac side, but in Windows 7, it causes the i7 intel CPU to go crazy. There is no CPU spike on the mac side.
    2) The headset jack in the imac is a trrs jack. The same as in the iphone, a tri-band jack that has three bands, two audio out channels and one mic in channel. A trrs headset works fine on the mac side with using the headset mic (as in iphone) rather than the built in mic. (this provides much better quality for sound recording). I don't want to use a usb mike.
    In Windows 7 the mic part of the trrs headset does not work.
    3) In Windows 7 when going into audio devices recording, no audio mixer shows up, so when I do video or audio screen capture the only way to capture the sound is through the speakers and then back through the imac built in mic, rather than directly through the unit. (terrible sound quality) On the mac side the mixer element works fine.
    Now I find from other imac users that even the new updates for the imac on windows 7 don't address and fix the audio issues. I am sure not going to go through 5 more days work only to find the audio issues still don't work.
    I need these audio aspects to work properly though!
    I have tried to get drivers for the cirrus logic audio card, but guess what there are none available and cirrus logic doesn't even recognize the board or offer drivers.
    I have many windows programs I must have for my scientific research!I bought the top of the line Imac with all the bells and whistles because Apple promised that the machine could run Windows 7 in bootcamp natively!
    It doesn't. This has been a nightmare of problems.
    Is Apple going to step up to the plate and make good on their promises?
    Does any one have a fix for any of the audio issues, or know how to install the new drivers without a complete reinstall of Windows?
    Installing a few sound drivers and software should not require a complete reinstall. Getting the proper drivers for the headset jack audio in and audio out jack should be the most basic of fixes. Making the audio mixer work should be elementary.
    If you are an Apple tech person or an Apple user that can help on these issues, please do!
    Thanks, Dr. Duke
    An American profesor in Europe.
    PS I will post this under Imac windows 7 updates without a reinstall and under
    imac Sound issues.

    On another thread a few people have responded saying that their imac has the same situation, the cpu is going crazy and the imac gets hot with headphones or speakers plugged in. But this doesn't happen in the mac side.
    If you have an late 2009 imac and don't have these audio issues, let us hear from you. If you don't, lay out the problem here.
    Here is my last two cents in to the inquiry.
    Not only does the cpu run crazy but the imac 27 gets very, very hot. Since I unplugged the headphones, it runs much, much cooler.
    Certainly, some Mac engineers should take care of this problem, it seems it is universal on all the imac 27's and from what I gather, the smaller screened cousins too.
    Also, we certainly want a stereo mix option for audio in or out, or what is called "what you hear" or wave out. Imac is supposed to be much geared to multimedia apps.
    Finally, the mic jack part of the trrs set up MUST be fixed! A lot of manufacturers are going to headset combo jacks as they call them, mic in and stereo out on the same tribanded plug. But, the old single jack for mic in and single jack for stereo out are two tiny parts of the hardware and super inexpensive for the manufacturer. Why in the **** to go to the "advanced" triplug if the **** thing doesn't work.
    Mac has a great reputation. I hope they remedy these problems right away.
    Anyone whose imac 27 or 24 whose headset plug is working correctly. Let us know! I don't think anyone's is, but I think that few people understand that their cpu is running so much faster with the plug in, plus few even understand the combo jack and the triband, or trrs audio jack! Out of 4 audio technicians I talked to, not one of them knew what a trrs jack was or that you even have a mic in jack as part of the headset jack!
    When I told one senior that it worked on the Mac side, he didn't believe for a while, thought my sound might be recorded from the onboard mic, but I proved it to him by tapping iaudibly on my iphone mic headset and and it showing up in garage band clearly and listening to big difference in audio.
    As for a usb audio adapter, I am in a neon light environment and find that those adapters are more sensitive to electrical interference. Besides I want to use the headset jack as it was meant to be used!
    Thats it.
    Again, if anyone using an imac 27 and windows 7 64 or 32 doesnt have these problems, let us know! We are all anxious for a fix!
    Best to all!

  • ITunes 10.5 64bit Windows 7 doesn't install - anyone else have the same problem

    I have downloaded the update.  It says that it does not update and to do it manually.  I am installing each installer at a time.  It does not seem to like AppleMobileDeviceSupport64 and just gives me that an error has occurred.  It does this after a long wait at the end.  Anyone with the same problem?

    Looks like there may be a solution on Itunes 10.5 64bit will not install on Win7. I am going to try that.

Maybe you are looking for

  • How to put iTunes content on one drive, everything else on another

    I have had an original Pro since '06. It doesn't run Mav, so I popped for the new one. Oddly enough, the price was exactly the same once inflation was considered. Thank you Canadian Petrodollars! Anyway... on my old machine I had an SSD called Fast w

  • Submitting Multiple Attachments in One Email

    I am using the iPad 2 to generate PDF contracts. The contracts are then e-mailed to my support group which processes the files to enroll a new client. I need to be able to include mutliple PDF's in a single e-mail, however there is no option in e-mai

  • Re-running a Thread

    Hi all, I have a problem with re-running a Thread. I try to reun a Thread via its start()-method. The first time everything works fine. The second time (after the Thread finishes his first execution) the run()-method is never invoked when calling sta

  • How to enable for Internet-Based Client Management existing "intranet" clients

    Hello, Step #1 I have an existing "intranet-only" SCCM 2012 SP1 CU1 environment. It is made of HTTP Intranet-Only MP. All clients are properly communicated with one of the intranet MP All clients are leveraging auto-enrollment of our AD PKI and have

  • How to Set the Text of an Onstage TextField?

    I'm trying to set an onstage TextField instance's "text" property, while maintaining embedded fonts and its onstage appearance. Problem Encountered: Text doesn't show up when setting text via ActionScript on an on-stage TextField w/ embedded text. Wo