11.5.10.2 database on OEL 6 x86_64 (2node RAC)

Hello,
we are preparing our new consolidated database environment (6 databases). It is 2 node 11G R2 RAC on Oracle Linux 6 64bit virtualized on Oracle VM.
Currently we are running split/mixed cofiguration 2 node 10.2.0.2 RAC on HP-UX and 2 node applications on RHEL 4.
We want to migrate the database to 11.2.0.3 RAC using export/import.
The problem is: Oracle Linux 6 is not certified as database operating system for 11.5.10.2 release ...
Oracle Linux end of support is 2017Q1 for OEL5 and 2021Q1 for OEL6.
Upgrage from 11i to R12 should take place in 2013, OEL6 is certified as database OS for R12.
What are your opinions?
Build OEL6 or OEL5 database environment ...
The only thing that can cause problems is running autoconfig scripts on database tier.
Regards
Karel

But you cannot upgrade OEL5 to OEL6 without reinstall.
It takes some resources ( time and money) to migrate all the databases (wa have 6 production RAC databases). When we use OEL6 in virtual environment we do not need to migrate or reinstall until 2021Q1.
When we use OEL5, at 2017Q1 we need to reinstall OS ( and database software) and migrate all databases ( and reconfigure all applications) to be supported.
I've raised SR with question certified vs. supported, in case of negative answer the only way seems to be the OEL5 way.
Thank you and Regards
Karel

Similar Messages

Are multiple PHYSICAL databases supported in one Oracle 10g RAC environment

Hi alls,
as of Metalink 220970.1 Oracle RAC is also supporting different databases in one cluster installation. RAC handles any resource as a service and it doesn't matter if these services belongs to only one or to different databases. You install the Oracle Clusterware only once and you create any service you want to make high available.
So is technically possible to install multiple databases on same Oracle Rac environment.
My doubts are related to SAP , does SAP certify such environments ?? we could have one SAP R/3 database and SAP BW database co-exist in a single Oracle RAC environment. or also co-exist SAP database with a non-SAP database (an already existing application) in the same Oracle Rac environment.
Any comment would be higly appreciated.
Silvio Brandani

We have ECC, BI, PI and Portal running on same Oracle RAC environment. We have one RAC for QA systems and one for PRD systems. We are not running any SAP applications along with Non-SAP applications on RAC. Keeping SAP and non-SAP apps separate would be a way to go.
Hope this helps.
Thanks,
Naveed

Database creation scripts from a running RAC

Hi all
We have a two node Oracle 10g R2 RAC running on SLES 10 SP2 Itanium systems.
We have 4 database instances running on the two nodes.
I need to create database creation scripts for one of the databases. eg. the script should contain all current configuration of the database (i.e i dont want the script which would have been created at the time of creation of the database)
Is this possible to achieve?
thanks

Hi,
You can follow this steps to create yours scripts using notes below:
Create Database Manually
*How to create a RAC database using DBCA generated scripts from templates [ID 856783.1]*
Create Database Service Manually
*How To Configure Server Side Transparent Application Failover [ID 460982.1]*
*10g & 11g :Configuration of TAF(Transparent Application Failover) and Load Balancing [ID 453293.1]*
Regards,
Levi Pereira
Edited by: Levi Pereira on Mar 18, 2011 11:36 AM

While Installing Oracle10g database in OEL, ERROR

Hi to all,
While Installing Oracle10gDatabase in Oracle Linux in VMware server console, i found the below error:-
Output generated from configuration assistant "Oracle Net Configuration Assistant".
Command = /home/oracle/oracle/product/10.2.0/db_1/jdk/jre//bin/java -Duser/
dir=/home/oracle/oracle/product/10.2.0/db_1/network/jlib -classpath
/home/oracle/oracle/product/10.2.0/db_1/jdk/jre//lib/i18n.jar:
/home/oracle/oracle/product/10.2.0/db_1/jdk/jre//lib/rt.jar:/home/oracle/oracle/product.10.
2.0/db_1/jlib/ewt3.jar:/home/oracle/oracle/product/10.2.0/db_1/jlib/ewtcompat-3_3_15.jar:
/home/oracle/oracle/product/10.2.0/db_1/jlib/netcfg.jar:/home/oracle/oracle/product/10.2.0
and etc.
Was i Installed it correctly? or did any mistakes? i didnt continue and i shutdown my system.
Later again when i want to start from that point, but i dont know how?
How i need to rectify and resume my database from that point?
Please let me know how to resolve. Your help will be highly appreciated.
As i am new to this; i got really confused.
Regards
Khan
Edited by: user1156065 on Jul 31, 2010 8:22 PM
Edited by: user1156065 on Jul 31, 2010 8:26 PM

Did you run any subsequent installation attempts? You need to find the error that applies to the initial problem. If you are not experienced in installing Oracle it might be the best to delete the installation, review the installation instructions, and try the installation again. It seems to me that you failed in performing some of the pre-installation instructions, i.e. defining $ORACLE_HOME and LD_LIBRARY_PATH.
You can find installation instructions for your Linux installation at:
http://www.oracle.com/pls/db102/homepage
If you follow the post installations carefully it will work. Perhaps this time, make a note of the error when they occur.
If you need help to manually uninstall Oracle, the following should help you:
uninstall oracle 10g from Linux Red hat
Edited by: Markus Waldorf on Aug 2, 2010 7:27 AM

How to uninstall/remove 11g database on (OEL)Oracle Enterprise Linux 6?

Hi there,
I was facing problem during 11g installation & i'm trying to reinstall 11g database again, but at step8 of 13, it show the error [INS-32021] Insufficient disk space on this volume for the selected Oracle home. i guess because of the previous database files still exist, anyone can give some links or solution ?
Thank you in advanced.
Edited by: 907267 on 11-Jan-2012 00:08

I'm running both 11g as well as 10g on Oracle Enterprise Linux 6 Update 1 without any problem.
Yes I know that it isn't supported but it works.
To your question:
a. is it the ORACLE_HOME it complains about or is it temp? Very often temp fills up during an installation and is not freed after the installation ends.
b. for a cleanup of the existing installation you should remove OraInventory and the files in /etc (like oratab, oraInst.loc).
BTW: I have my own blog (streetkiter.wordpress.com) where I wrote a post how to install 11g and 10g (!) RAC on Oracle Linux 6.
Edited by: carajandb on 16.01.2012 09:02

How to add a second database along with existing two node RAC environment

Hi,
I was wondering if anyone can help me with this.
My Environment:
1. Two node RAC Cluster database (11.2.0.2) with ASM running perfectly (Oracle Sid = test-1)
2. I have installed a second single instance db on node 2 (Oracle Sid = test-2) with NTFS file system for datafiles
3. Database is up and running, but I am not able to connect it from any client.
4. I am getting ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
5. Database (test2) is registered with grid LISTENER
5. TNSPING from client machine response is ok
Am I missing something here, happy to provide more info if requested.
Thanks,
PS

C:\Users\root.test_prod>lsnrctl
LSNRCTL for 64-bit Windows: Version 11.2.0.2.0 - Production on 23-FEB-2012 11:58:05
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Welcome to LSNRCTL, type "help" for information.
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.2.0 - Production
Start Date 18-FEB-2012 19:51:47
Uptime 4 days 16 hr. 6 min. 24 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\app\11.2.0\grid\network\admin\listener.ora
Listener Log File C:\app\11.2.0\grid\log\diag\tnslsnr\IRIS11G-DB-2\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\LISTENERipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.30.0.202)(PORT=1520)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.30.0.215)(PORT=1520)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+asm2", status READY, has 1 handler(s) for this service...
Service "test-11gRAC.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Service "test-11gRXDB.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Service "irisapps.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Service "test-2" has 1 instance(s).
Instance "test-2", status READY, has 1 handler(s) for this service...
Service "test-2XDB" has 1 instance(s).
Instance "test-2", status READY, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL> service
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+asm2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1322 refused:0 state:ready
LOCAL SERVER
Service "test-11gRAC.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1829 refused:0 state:ready
LOCAL SERVER
Service "test-11gRXDB.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: IRIS11G-DB-2, pid: 4496>
(ADDRESS=(PROTOCOL=tcp)(HOST=IRIS11G-DB-2.test_prod.internal)(PORT=57695))
Service "irisapps.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1829 refused:0 state:ready
LOCAL SERVER
Service "test-2" has 1 instance(s).
Instance "test-2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "test-2XDB" has 1 instance(s).
Instance "test-2", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: IRIS11G-DB-2, pid: 9340>
(ADDRESS=(PROTOCOL=tcp)(HOST=IRIS11G-DB-2.test_prod.internal)(PORT=58653))
The command completed successfully
LSNRCTL>

How to create second database at ASM in 4 node RAC system

Hi Experts,
we use 4 nodes RAC (11.0.1) with 10.2.0. 4 database in red hat5.0
we want to add second database at ASM in RAC system based on manager decision.
how do I add second database in ASM with exist database?
Do I need to created new ASM insatnce?
how to create two new diskgroup? is it under existing ASM instance or new ASM instance?
how to reset ASM properity to support ( or new) ASM instance and two database?
Do I need to configure AMS again after added more space into ASM?
I could not find ducument that add seconf database into ASM in RAC system.
I want add second database by dbca. any experience for add second database in ASM RAC ?
Thanks for help!
JIm

Hi... I'm in the same situation.
I need to add a new second database on a RAC installation based on already available ASM instance.
I'm using 11gR2.
I read your suggested documentation. Then I typed asmca and analyzed my asm configuration:
As you can see I have a DISK GROUP NAME with several FREE space.
!http://img522.yfrog.com/img522/8405/dbca20100203173248.jpg!
If I select Volumes tab the following is my current configuration:
!http://img682.yfrog.com/img682/562/dbca20100203173343.jpg!
Selecting Create button, I can insert some values as you can see:
!http://img403.yfrog.com/img403/9889/dbca20100203173403.jpg!
First question:
Is this the right way to create space for a new database ? Consider that running dbca.. no DISK GROUP NAME is available.
Second question:
When I created my first database on this DISK GROUP NAME no volumes were created. Why now I have to do it ? Is this necessary to really separate datafiles coming from different databases ?

Service ora. database .db not start datbase automaticaly (RAC 11gR2)

Hi all,
after install Grid Infraestructure, RAC database and created database. All services are ok, database is ok. Everything are running fine.
So, when I make a test to reboot my servers, i see that the service ora.<database>.db are OFFLINE and not start automaticaly after reboot.
I´m using 11g R2 on Solaris 10.
Does anybody can help me ?
Thanks
Wander (Brazil)
Edited by: Wander(Brazil) on Oct 15, 2010 6:43 AM
Edited by: Wander(Brazil) on Oct 15, 2010 6:46 AM

Hi,
You have to follow some order for starting services in RAC database.
Check the below steps can help you:
The ORDER IS AS FOLLOWS
For Starting things:
Step 1 Start Clusterware
Note
When any host in the cluster boots,Clusterware should be started.
The scripts listed below help make this happen:
/etc/inittab
/etc/rc5.d/S96init.crs
/etc/init.d/init.crs
/etc/init.d/init.crsd
/etc/init.d/init.cssd
/etc/init.d/init.evmd
Be aware of this for 2 reasons:
1. It may be unneccesary for you to start Clusterware. It might already be started.
2. The script, /etc/init.d/init.crs, can be used to start Clusterware if you want to use it.
To start Clusterware manually, maybe use this script instead of init.crs:
To start Clusterware manually, maybe use this script instead of init.crs:
#!/bin/sh
# Run as root
# start
ssh dbcl1n1 /home/app/crs/bin/crsctl start crs
or
$ sudo /home/app/crs/bin/crsctl start crs
Step 2: Start nodeapps
After you start Clusterware, you may start nodeapps.
Use this script to start nodeapps:
#! /bin/sh
# start
srvctl start nodeapps -n dbcl1n1
Step 3:Start Database
After you start the nodeapps, you may start the Databases.
Use this script to start the databases:
#! /bin/sh
# ps
ssh dbcl1n1 ps -ef | grep dbw
# status
srvctl status database -d AUCD
# start
srvctl start database -d AUCD
Step 4:Start the application after starting the Database
Best regards,
Rafi.
http://rafioracledba.blogspot.com

Can't create 11gR1 Database with 11gR2 CRS/ASM non RAC, dbca ASM password

Hi,
try to create a 11gR1 SE Database on a single server with 11gR2 ASM up and running.
when dbca ask where to store the datafiles and i choose ASM, i have to give the asm sys password which i know (can connect with sql+).
dbca replies wrong password and i can NOT go further.
is it possible to use 11gR2 ASM with 11gR1 database and create a database with dbca?
any hint for this situation?
thanks
Michael
Edited by: user12132314 on 18.07.2010 22:24

Hello,
i tried again - still don't work
it is dbca step 6 from 16, storage option (or something simiular - dbca lang here is german)
the dialog looks like this
ASM-ID-Data (Titel)
enter ASM specific SYS password (prompt)
entering the correct pwd and push OK
dbca shows a error dialog with something like: password for user SYS not valid. Enter a valid password.
Any help?
Michael

Relink of libraries for DB 11.1.0.7 on OEL 64-bit erroring out

Hi,
I have installed DB 11gR1 (11.1.0.6) for 64-bit on OEL 5 x86_64-bit server successfully.
Oracle® Database 11g Release 1 (11.1.0.6.0) for Linux x86-64 (DVD)      B45168-01
Then upgraded to 11.1.0.7 using the patchset.
Now I am trying to clone the same to another host which is also OEL 5 x86_64.
Master Host:
Vendor and Model Dell Computer Corporation PowerEdge 1950
Platform      Linux x86-64 - 226
OS Release      Enterprise Linux Enterprise Linux Server release 5.2 (Carthage)
Cloned Host:
Vendor and Model Dell Computer Corporation PowerEdge 1950
Platform      Linux x86-64 - 226
OS Release      Enterprise Linux Enterprise Linux Server release 5.2 (Carthage)
I have copied the datafiles and modified pfile and other required config files.
Then ran "relink all", where it is erroring out.
relink all >$ORACLE_HOME/dbs/dbrelink.log
collect2: ld terminated with signal 9 [Killed]
genclntsh: Failed to link libclntsh.so.11.1
make: *** [client_sharedlib] Error 1
/usr/bin/ld: cannot find -lclntsh
collect2: ld returned 1 exit status
/bin/chmod: cannot access `/slot/ems6095/oracle/product/db/11.1/precomp/lib/proc': No such fil
e or directory
make: *** [slot/ems6095/oracle/product/db/11.1/precomp/lib/proc] Error 1
^[[Acollect2: ld terminated with signal 9 [Killed]
genclntsh: Failed to link libclntsh.so.11.1
make: *** [slot/ems6095/oracle/product/db/11.1/lib/libclntsh.so] Error 1
/usr/bin/ld: cannot find -lclntsh
collect2: ld returned 1 exit status
make: *** [slot/ems6095/oracle/product/db/11.1/rdbms/lib/imp] Error 1
Kindly let me know where it is going wrong.
Regards,
Raj.

As per the Note -- Note 786995.1
RPM missing :-
glibc-devel (64-bit)
But glibc-devel is installed.
-bash-3.2$ rpm -q --queryformat "%{NAME}-%{VERSION}-%{RELEASE} (%{ARCH})\n" binutils compat-libstdc++-33 elfutils-libelf elfutils-libelf-devel gcc gcc-c++ glibc glibc-common glibc-devel-2.5 libaio libaio-devel libgcc libstdc++ libstdc++-devel make sysstat | grep glibc-devel
glibc-devel-2.5-24 (x86_64)
glibc-devel-2.5-24 (i386)
-bash-3.2$
Looks like the Second Note -- Note 443696.1
Applies to:
Oracle Server - Enterprise Edition - Version: 10.2.0.1 to 11.1.0.6
Sun Solaris SPARC (64-bit)
Solaris Operating System (SPARC 64-bit)
Please correct me if I am wrong.

Investigate database activity at a specific time

I am working on Oracle 10.2.0.4 database on OEL 5.
We had a heavy load on the database yesterday evening and the database was performing very slowly.
Is it possible to check what activity would have occurred at that time.
OEM can be of help but I thought if there are any other database views other than the AWR which stores these information ?
Any suggestions would be of great help?
If it is only through AWR which tables and columns should i query for relevant data?

michael_k wrote:
Is the AWR turned on?
Try: Performance-Tab -> Snapshots
Select a start-snapshot, Select Actions: View Report, Select a end-Snapshot and generate Report.
This will provide a Statspak-like Report. When you select the Action Compare Periods you could comapre a typical behavior and that a-typical.
Regards
Michael_KJust to add that you can also of course do this from the command line on the server, if you are appropriately licensed for awr as before, by running @?/rdbms/admin/awrrpt from sqlplus whilst connected as an appropriately privileged user - I tend to use system
Niall Litchfield
http://www.orawin.info/

User with VPN Connections cannot connect to our Oracle Database

Hi Everyone,
I am facing a problem today with our Production Database.
User with our branches using VPN connection cannot connect to our Oracle Database.
As per checking the alert log, I saw this message
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for Linux: Version 11.2.0.3.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.3.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.3.0 - Production
Time: 13-AUG-2013 13:08:42
Tracing not turned on.
Tns error struct:
    ns main err code: 12535
TNS-12535: TNS:operation timed out
    ns secondary err code: 12560
    nt main err code: 505
TNS-00505: Operation timed out
    nt secondary err code: 110
    nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.100.131)(PORT=1137))
We are using Oracle 11gR2 Database running OEL 6
Kindly help us to solve this.
Thank you

Hi Dude,
My firewall is disable in my db host.
I also check the firewall on client end and it is also disabled.
I also talk to my Network Administrator for adjustment in Router and Firewall to allow port 1521 to accept connection but still unsuccessful.
What seems to be the problem ?

Multiple copies of same database on a 2 node RAC server - How to merge ?

I currently have multiple copies of the same database running on a 2 node Rac system. I am looking for a way to combine them into 1 large database but keeping the data separate.
The databases are copies of production for testing, development and a yearly "historical" databases .
All the databases are created from production, and generally have the same schema's , tables, procedures, etc however may be different versions and need to be.
Is There a way to use one large database and logically split all the different versions of the same objects into their own space in one database ? The structure cannot change as the database is for a 3rd party's Forms application the relies on the objects not changing names etc.
Ideally I am looking for a solution that will allow the forms application to connect to "test" and "historical" copies of our production database separately in the same database container.
Thanks for any direction.

I currently have multiple copies of the same database running on a 2 node Rac system. I am looking for a way to combine them into 1 large database but keeping the data separate.
The databases are copies of production for testing, development and a yearly "historical" databases .
All the databases are created from production, and generally have the same schema's , tables, procedures, etc however may be different versions and need to be.
Is There a way to use one large database and logically split all the different versions of the same objects into their own space in one database ? The structure cannot change as the database is for a 3rd party's Forms application the relies on the objects not changing names etc.
Ideally I am looking for a solution that will allow the forms application to connect to "test" and "historical" copies of our production database separately in the same database container.
Thanks for any direction.

Multiple Oracle Databases in a Single Windows Server

Hi all,
I have Windows Server System which has oracle database created.
My question is:-
How can i create multiple databases on the same server without affecting the first created database & i want to use the both databases at a time?
Please give the steps to do multiple databases in the same server if possible..
Thanks in advance,
Venkatesh J

Venkateshj wrote:
How can i create multiple databases on the same server without affecting the first created database & i want to use the both databases at a time?Yes, possible. No, invariable a a bad idea as this is not a scalable approach.
Oracle scales by adding more servers to a single physical database. This is called Oracle RAC.
You want to add more physical databases to a single server - doing the exact opposite of what Oracle offers as a scalable solution.
Please give the steps to do multiple databases in the same server if possible..No special steps. Run DBCA and create a new database instance. In other words, the exact same steps followed for creating the 1st database on that server.
Also make sure you fully understand WHAT you are doing and the IMPLICATIONS of that. An Oracle database is not the same as a mySQL or SQL-Server database. An Oracle Schema is a logical database - and compares to what a mySQL/SQL-Server database is.
And a single Oracle database can contain 1000s of logical databases (schemas). Each with their own dedicated storage, own security, own resource profile, etc.
Oracle is not mySQL/SQL-Server.
Understanding the differences is important.

Data Guard configuration for RAC database disappeared from Grid control

Primary Database Environment - Three node cluster
RAC Database 10.2.0.1.0
Linux Red Hat 4.0 2.6.9-22 64bit
ASM 10.2.0.1.0
Management Agent 10.2.0.2.0
Standby Database Environment - one Node database
Oracle Enterprise Edition 10.2.0.1.0 Single standby
Linux Red Hat 4.0 2.6.9-22 64bit
ASM 10.2.0.1.0
Management Agent 10.2.0.2.0
Grid Control 10.2.0.1.0 - Node separate from standby and cluster environments
Oracle 10.1.0.1.0
Grid Control 10.2.0.1.0
Red Hat 4.0 2.6.9-22 32bit
After adding a logical standby database through Grid Control for a RAC database, I noticed sometime later the Data Guard configuration disappeared from Grid Control. Not sure why but it is gone. I did notice that something went wrong with the standby creation but i did not get much feedback from Grid Control. The last thing I did was to view the configuration, see output below.
Initializing
Connected to instance qdcls0427:ELCDV3
Starting alert log monitor...
Updating Data Guard link on database homepage...
Data Protection Settings:
Protection mode : Maximum Performance
Log Transport Mode settings:
ELCDV.qdx.com: ARCH
ELXDV: ARCH
Checking standby redo log files.....OK
Checking Data Guard status
ELCDV.qdx.com : ORA-16809: multiple warnings detected for the database
ELXDV : Creation status unknown
Checking Inconsistent Properties
Checking agent status
ELCDV.qdx.com
qdcls0387.qdx.com ... OK
qdcls0388.qdx.com ... OK
qdcls0427.qdx.com ... OK
ELXDV ... WARNING: No credentials available for target ELXDV
Attempting agent ping ... OK
Switching log file 672.Done
WARNING: Skipping check for applied log on ELXDV : disabled
Processing completed.
Here are the steps followed to add the standby database in Grid Control
Maintenance tab
Setup and Manage Data Guard
Logged in as sys
Add standby database
Create a new logical standby database
Perform a live backup of the primary database
Specify backup directory for staging area
Specify standby database name and Oracle home location
Specify file location staging area on standby node
At the end am presented with a review of the selected options and then the standby database is created
Has any body come across a similar issue?
Thanks,

Any resolution on this?
I just created a Logical Standby database and I'm getting the same warning (WARNING: No credentials available for target ...) when I do a 'Verify Configuration' from the Data Guard page.
Everything else seems to be working fine. Logs are being applied, etc.
I can't figure out what credentials its looking for.

11.5.10.2 database on OEL 6 x86_64 (2node RAC)

Similar Messages

Maybe you are looking for