11.5.10.2 Workflow-only users licensing
Hi,
I have a question on licensing required for the users who only have a 'Workflow user' responsibility in OEBS, version 11.5.10.2.
We'd like to start using iExpenses, but currently lots of potential approvers do not have any access in OEBS, I wonder how much it could cost us to create them in the system as a workflow-only users. Any references to Oracle's pricing policy on the subject are welcome.
Thanks,
Vadim
Please contact your Oracle Sales representative; he/she is the best one to answer Oracle License questions.
You may review these links and see if it helps.
Global Pricing and Licensing
http://www.oracle.com/us/corporate/pricing/index.html
Oracle Price Lists
http://www.oracle.com/us/corporate/pricing/price-lists/index.html
Thanks,
Hussein
Similar Messages
-
Acrobat Pro XI problem+Accept End User License Agreement when opening a PDF inside IE
Hi folks, this issue has been challenging.
Acrobat Pro CC install
W7 X64
Deployment went ok after the code was worked out, but.....
We use Desire to Learn content management system at the community college where I maintain the student computers at. When running D2L and a PDF has been embedded in some course material, I am getting the message below and the PDF won't open.
“Before proceeding you must first launch Adobe Acrobat and accept the End User License Agreement" .
The only fix so far is to run up Acrobat Pro and run the program once. Fine and dandy, but we are looking at 700+ machines to clear in this fashion. The other part of this scenario we we also utilize Respondus Lockdown Browser to invigilate exams through D2L. Because of the "lock down" features, the student can't even get back to the desktop to run Acrobat and clear the message.
I have tried a number of GPO entries to no avail. As well, disabled the IE PDF viewer add-on. I ran Procmon with no results either; .
I have been scouring the Googlemachine and building on the GPO below to get around the issue with no results. I am hoping someone with a sharper eye than I can spot something or point me in the correct direction..
Thanks eh.
GPLabs-Acrobat Reader default .PDF file open
Computer Configuration (Enabled)
Policies
Administrative Templates
Policy definitions (ADMX files) retrieved from the central store.
Adobe Acrobat XI/Preferences/General
Policy Setting Comment
Show messages when I launch Acrobat Disabled
Adobe Reader XI/Preferences/General
Policy Setting Comment
Show messages when I launch Reader Disabled
Adobe Reader XI/Preferences/Startup
Policy Setting Comment
Enable Protected Mode at startup Disabled
Preferences
Windows Settings
Registry
ELUA=1 (Order: 1)
General
Action Update
Properties
Hive HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path Software\Adobe\Acrobat Reader\11.0\AdobeViewer
Value name ELUA=1
Value type REG_DWORD
Value data 0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item No
Remove this item when it is no longer applied No
Apply once and do not reapply No
EULAAcceptedForBrowser (Order: 2)
General
Action Update
Properties
Hive HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path Software\Adobe\Adobe Acrobat\11.0\AdobeViewer
Value name EULAAcceptedForBrowser
Value type REG_DWORD
Value data 0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item No
Remove this item when it is no longer applied No
Apply once and do not reapply No
ELUA=1 (Order: 3)
General
Action Update
Properties
Hive HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path Software\Adobe\Acrobat Reader\10.0\AdobeViewer
Value name ELUA=1
Value type REG_DWORD
Value data 0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item No
Remove this item when it is no longer applied No
Apply once and do not reapply No
EULAAcceptedForBrowser (Order: 4)
General
Action Update
Properties
Hive HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path Software\Adobe\Adobe Acrobat\10.0\AdobeViewer
Value name EULAAcceptedForBrowser
Value type REG_DWORD
Value data 0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item No
Remove this item when it is no longer applied No
Apply once and do not reapply No
bBrowserIntegration (Order: 5)
General
Action Update
Properties
Hive HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path Software\Adobe\Acrobat Reader\11.0\Originals
Value name bBrowserIntegration
Value type REG_SZ
Value data 00000000
Common
Options
Stop processing items on this extension if an error occurs on this item No
Remove this item when it is no longer applied No
Apply once and do not reapply No
bBrowserIntegration (Order: 6)
General
Action Update
Properties
Hive HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path Software\Adobe\Acrobat Acrobat\11.0\Originals
Value name bBrowserIntegration
Value type REG_SZ
Value data 00000000
Common
Options
Stop processing items on this extension if an error occurs on this item No
Remove this item when it is no longer applied No
Apply once and do not reapply No
bBrowserIntegration (Order: 7)
General
Action Update
Properties
Hive HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path Software\Adobe\Acrobat Reader\10.0\Originals
Value name bBrowserIntegration
Value type REG_SZ
Value data 00000000
Common
Options
Stop processing items on this extension if an error occurs on this item No
Remove this item when it is no longer applied No
Apply once and do not reapply No
User Configuration (Enabled)
Preferences
Windows Settings
Registry
ELUA (Order: 1)
General
Action Update
Properties
Hive HKEY_CURRENT_USER
Key path Software\Adobe\Acrobat Reader\11.0\AdobeViewer
Value name ELUA
Value type REG_DWORD
Value data 0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item No
Run in logged-on user's security context (user policy option) No
Remove this item when it is no longer applied No
Apply once and do not reapply No
ELUA (Order: 2)
General
Action Update
Properties
Hive HKEY_CURRENT_USER
Key path Software\Adobe\Acrobat Reader\10.0\AdobeViewer
Value name ELUA
Value type REG_DWORD
Value data 0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item No
Run in logged-on user's security context (user policy option) No
Remove this item when it is no longer applied No
Apply once and do not reapply No
.pdf (Order: 3)
General
Action Update
Properties
Hive HKEY_CURRENT_USER
Key path software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.pdf
Common
Options
Stop processing items on this extension if an error occurs on this item No
Run in logged-on user's security context (user policy option) No
Remove this item when it is no longer applied No
Apply once and do not reapply No
OpenWithList] (Order: 4)
General
Action Update
Properties
Hive HKEY_CURRENT_USER
Key path Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.PDF\OpenWithList]
Value name (Default)
Value type REG_SZ
Value data "AcroRd32.exe"
Common
Options
Stop processing items on this extension if an error occurs on this item No
Run in logged-on user's security context (user policy option) No
Remove this item when it is no longer applied No
Apply once and do not reapply No
Control Panel Settings
Folder Options
Open With (Extension: pdf, Program: C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe)
pdf (Order: 1)
General
Action Update
Properties
File Extension pdf
Associated Program C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe
Set as default Enabled
Common
Options
Stop processing items on this extension if an error occurs on this item No
Run in logged-on user's security context (user policy option) Yes
Remove this item when it is no longer applied No
Apply once and do not reapply No
Open With (Extension: pdf, Program: C:\Program Files (x86)\Adobe\Reader 10.0\Reader\AcroRd32.exe)
pdf (Order: 2)
General
Action Update
Properties
File Extension pdf
Associated Program C:\Program Files (x86)\Adobe\Reader 10.0\Reader\AcroRd32.exe
Set as default Enabled
Common
Options
Stop processing items on this extension if an error occurs on this item No
Run in logged-on user's security context (user policy option) Yes
Remove this item when it is no longer applied No
Apply once and do not reapply NoHi technobyte,
Try using APTEE to do EULA suppression and check.
You might want to refer the docs:
Creative Cloud Help | Using Adobe Provisioning Toolkit Enterprise Edition
4 Installation Workflows — Enterprise Administration Guide
Regards,
Rave -
How to restrict "sftp only" user into your home dir and subdir
Hi OTN forums members
Question : I want restrict a sftp only user to browse ONLY in your home directory and subdirectory . I don't want sftp user access into other directory.
Details : I want use a "ssh bundle package" on s10(only package on SUNWCXall installation cluster). I don't want to use the "extrernal package", as "ProFTP", "Chroot", sunfreeware OpenSSH package,ecc. It's possible?
Technical Details of my system(test) : the hostname and username it's fantasy name, not real ;-)
root@sunlab1:/[1]$ cat /etc/release
Solaris 10 5/09 s10s_u7wos_08 SPARC
Copyright 2009 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 30 March 2009
root@sunlab1:/[2]$ uname -a
SunOS sunlab1 5.10 Generic_142909-17 sun4u sparc SUNW,Sun-Blade-100
root@sunlab1:/[3]$ grep explorer /etc/group
explorer::111:
root@sunlab1:/[4]$ grep explorer /etc/passwd
explorer:x:111:111:Sun Explorer Data Collector sftp only user:/export/home/explorer:/usr/lib/ssh/sftp-server
root@sunlab1:/[5]$ zfs list
NAME USED AVAIL REFER MOUNTPOINT
rpool 27.3G 9.33G 96K /rpool
rpool/ROOT 11.6G 9.33G 18K legacy
rpool/ROOT/s10s_u7wos_08 11.6G 9.33G 11.6G /
rpool/cfengine 73.7M 950M 73.7M /var/cfengine
rpool/dump 1.00G 9.33G 1.00G -
rpool/export 5.01G 9.33G 11.8M /export
rpool/export/home 1.40G 3.60G 1.40G /export/home
rpool/mp3 2.65G 2.35G 2.65G /mp3
rpool/patches 206M 2.80G 206M /var/patches
rpool/swap 768M 9.58G 514M -
root@sunlab1:/[6]$
root@sunlab1:/[7]$ cd /export/home
root@sunlab1:/export/home[9]$ ls -la
total 47
drwxr-xr-x 5 root root 9 Oct 7 09:51 .
drwxr-xr-x 4 root sys 6 Jun 7 09:44 ..
drwxr-x--- 11 explorer explorer 11 Oct 7 11:30 explorer
root@sunlab1:/[8]$ sftp explorer@sunlab1
Connecting to sunlab1...
Password:
sftp> dir
[...more output...]
sftp> pwd
Remote working directory: /export/home/explorer
sftp> cd /var/adm
sftp> dir
[...more output...]
sftp> get messages
Fetching /var/adm/messages to messages
sftp> pwd
Remote working directory: /var/adm
sftp> bye
root@sunlab1:/[9]$
root@sunlab1:/[10]$ pkginfo -l SUNWsshr
PKGINST: SUNWsshr
NAME: SSH Client and utilities, (Root)
CATEGORY: system
ARCH: sparc
VERSION: 11.10.0,REV=2005.01.21.15.53
BASEDIR: /
VENDOR: Sun Microsystems, Inc.
DESC: Secure Shell protocol Client and associated Utilities
[...snip...]
root@sunlab1:/[11]$ pca -l installed --pattern=[Ss]sh
[...snip...]
Using /var/patches/pca/patchdiag.xref from Oct/14/10
Host: sunlab1 (SunOS 5.10/Generic_142909-17/sparc/sun4u)
List: installed (3/584)
Patch IR CR RSB Age Synopsis
141742 04 = 04 -S- 427 Obsoleted by: 141444-09 SunOS 5.10: sshd patch
143140 04 = 04 RS- 119 Obsoleted by: 143559-03 SunOS 5.10: ssh patch
143559 03 = 03 RS- 38 SunOS 5.10: ssh scp patch
root@sunlab1:/[12]$ pca -l 141444 143559
Using /var/patches/pca/patchdiag.xref from Oct/14/10
Host: sunlab1 (SunOS 5.10/Generic_142909-17/sparc/sun4u)
List: 141444 143559 (2/405)
Patch IR CR RSB Age Synopsis
141444 09 = 09 RS- 367 SunOS 5.10: kernel patch
143559 03 = 03 RS- 38 SunOS 5.10: ssh scp patch
root@sunlab1:/[13]$Legenda:
PCA = [url http://www.par.univie.ac.at/solaris/pca/] Patch Check Advanced , PCA is 3PP free and fast tool for Analyze, download and install patches for Solaris
IR =Installed Rev. CR = Current Rev. (published on patchdiag.xref from Oct/14/10)
RSB =[R]eccommended,[S]ecurity, [\B]ab patches
Not helpful reading "<tt>man sshd_config</tt>" and "<tt>man sftp-server</tt>", and Google searching. Nothing by MOS Community search.
Any idea?
Best Regards
Michele V.
P.S.: Excuse me for my bad English.Hi OTN forums members,
I find the solution. Thanks Andrea Manganaro (aka Amanga) for the help.
1) Download and install OpenSSH for Solaris 10/SPARC and all dependencies(Please read the http://www.sunfreeware.com/openssh.html note):
- [url ftp://ftp.sunfreeware.com/pub/freeware/sparc/10/openssh-5.6p1-sol10-sparc-local.gz]openssh-5.6p1-sol10-sparc-local.gz
- [url ftp://ftp.sunfreeware.com/pub/freeware/sparc/10/openssl-1.0.0a-sol10-sparc-local.gz]openssl-1.0.0a-sol10-sparc-local.gz
- [url ftp://ftp.sunfreeware.com/pub/freeware/sparc/10/zlib-1.2.5-sol10-sparc-local.gz]zlib-1.2.5-sol10-sparc-local.gz
- [url ftp://ftp.sunfreeware.com/pub/freeware/sparc/10/libgcc-3.4.6-sol10-sparc-local.gz]ibgcc-3.4.6-sol10-sparc-local.gz
2) Configure <tt>/usr/local/etc/sshd_config</tt> file with the "+<tt>ChrootDirectory</tt>+" directive. For me:
# override default of no subsystems
#Subsystem sftp /usr/local/libexec/sftp-server
Subsystem sftp internal-sftp[...]
# Example of overriding settings on a per-user basis
Match Group sftponly
ChrootDirectory %h
ForceCommand internal-sftp
AllowTcpForwarding no3) Create group and user for sftp-only account. For me:
root@taurus # groupadd sftponly
root@taurus # grep sftponly /etc/group
sftponly::202:
root@taurus # useradd -g sftponly -c "Sftp only user" -d /export/home/explorer -s /bin/false -m explorer
explorer:x:1002:202:Sftp only user:/export/home/explorer:/bin/false
root@taurus # passwd explorer
New Password:
Re-enter new Password:
passwd: password successfully changed for explorer
root@taurus # 4) Change home directory permission and create a r/w direcorty (uploads) for sftponly user account.
root@taurus # cd /export/home
root@taurus # ls -la
total 14
drwxr-xr-x 4 root root 4 Oct 29 15:28 .
drwxr-xr-x 3 root sys 3 Jan 22 2009 ..
drwxr-xr-x 3 explorer sftponly 3 Oct 29 15:41 explorer
root@taurus # chown root:sftponly explorer; chmod 750 explorer
root@taurus # ls -la
total 14
drwxr-xr-x 4 root root 4 Oct 29 15:28 .
drwxr-xr-x 3 root sys 3 Jan 22 2009 ..
drwxr-x--- 3 root sftponly 3 Oct 29 15:41 explorer
root@taurus # This will make a read-only, chrooted directory perfect for people to come in and get stuff, but never write.
For example, you could make a directory explorer/uploads that allow people to write in.Then you can moderate what gets copied into the read-only /explorer area. Remember that if a user can write in a directory then they can also delete anything in that directory.
root@taurus # cd explorer
root@taurus # mkdir uploads && chown -R explorer:sftponly uploads && chmod 0755 uploads
root@taurus # ls -al
total 9
drwxr-x--- 3 root sftponly 3 Oct 29 15:41 .
drwxr-xr-x 4 root root 4 Oct 29 15:28 ..
drwxr-xr-x 2 explorer sftponly 2 Oct 29 15:56 uploads
root@taurus # 5) Disable SunSSH "service" and enable OpenSSH "service" (with SMF):
root@taurus # svcadm disable sshSee [url http://www.sunfreeware.com/sshsol10.html]here for Running openssh vis SMF on Solaris 10 Systems
root@taurus # svcadm disable ossh
root@taurus # svcs -a | grep ssh
disabled 12:37:51 svc:/network/ssh:default
online 15:29:41 svc:/network/ossh:default
root@taurus # 6) Test your job :-)
Helpful links:
==============
http://www.sunfreeware.com
http://www.openssh.org
http://calomel.org/sftp_chroot.html
HTH
Michele Vecchiato -
User Licensing for Approvers in GRC AC 5.3
Hi all
I am looking for some clarification regarding the user licensing.
In CUP, we have managers who will need AEApprover role to approve the user requests.
In our case, we have SAP EP as the single point of entry to the application (both ECC & GRC AC). Also
some of the managers who are involved in the approval process (in CUP) do not need access to the ECC backend system.
So managers only need an entry in the AD(LDAP) which is the datasource for SAP EP, GRC AC. This means that GRC UME (authentication system for CUP) is the only place where the managers user profile are maintained.
Will these managers be accounted for SAP licenses?
My answer is No. The managers will not be accounted for SAP (prof/ limited prof) license cost as they do not have any access to the ECC system. All users in GRC system will be accounted for GRC AC licensing ( which is based on the operating budget of the organazation)
Appreciate if you can confirm whether my understanding is correct.
Thanks
KeerthikaClosing the request as this has been answered in the forum and I got a confirmative answer from SAP too..
Rationale:
GRC users dont count for SAP ECC license unless they have a dialog user account in the ECC system.
Thanks
Kee -
Each time I try to open a PDF in Safari I am directed to this message:
"Before proceeding you must first launch Abobe Acrobat and accept the End User License Agreement".
This prevents me from viewing the PDF in a Safari window, or downloading the PDF file to my computer and viewing it.
No such option to "accept End User License Agreement" is avialable when I launch Adobe Acrobat. This problem has only occured since I undertook a trial of Adobe CC, and subsequently uninstalled it after deciding not to proceed with a license.
I do have Adobe 9 Acrobat Pro and Adobe Suite CS4 fully licened and operational on my Mac. I have never had this problem prior to trialing Adobe CC.If launching Adobe Reader doesn't help, try this.
1. Check the Applications folder carefully - put it into alphabetical order NOT icons. See if there is more than one Adobe Reader or Adobe Acrobat. If so, start each one in turn. Notice whether the message says "Adobe Reader" or "Adobe Acrobat" too.
2. If that doesn't help, even after quitting all the apps (Safari and Adobe Reader), downloading and installing again is worth a try. This will not make the message go away! But it might cause the license agreement to appear properly. -
Adobe Reader X End User License Error
Operating System: Windows 7 Professional x32
Product: Adobe Reader X
In reading through other forums it seems that this is a common bug with Adobe Reader X. We are a medical company and have a lot of CCR and CR's that are in PDF form. Seems that whenever one of these email attachments is involved where the C is next to the R in the PDF file name it throws up the following error:
"Before proceeding you must first launch Adobe Acrobat and accept the End User License Agreement" - except we already accepted the license agreement on the first launch of Adobe Reader.
The workaround that was suggested is to always enable protected mode but when we enable protected mode we can't open the PDF that way either. "There was an error opening the document. Access Denied."
So the only OTHER workaround I've found is to open Adobe Reader first before trying to open the attachments and then it works. But my user's of course like things simple and would like to be able to just open the attachment without opening the Adobe Reader beforehand.
Any ideas?The EULA will automatically pop up when you open Adobe Reader for the first time (after installing or updating).
-
Photoshop Elements 8 not opening after agreeing to end user license agreement?
So like the title suggests, when I try to open Photoshop Elements 8, an End User License Agreement pops up for me. This happened just recently and in the years I've used the software it has never, ever done this to me, so I was kind of surprised when it popped up. I click accept to proceed, but after I click accept, it doesn't do anything at all. No matter how many times I try opening it, no matter how many times I try to only open the editor first and not the organizer or run as administrator, nothing seems to work. I really don't understand why this is happening and what I should do. I know reinstalling is an option, but I no longer have the installation disc so I would like to try other methods of fixing this if possible.
Enclosing a picture below so you can see what I'm dealing with:Try the licensing service update:
http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html -
Reader X problem - Accept End User License Agreement
I have recently updated to Adobe Reader X.
I use Windows XP (SP3) and Internet Explorer.
Now, when I attempt to read a .pdf file a Reader X message pops up with the following message;
"Before proceeding you must first launch Adobe Acrobat and accept the End User License Agreement".
I do not have Adobe Acrobat, I am using the free Adobe Reader X.
Why am I getting this message and what can I do to stop it so that I can again read .pdf files.
This never happened with the previous version of Adobe Reader.
How can I go back to the previous version?
Thanks
Gryphon2345I have the same issue reported by Gryphon, however this response is an odd fix IF it were to be available to me.
The "Enable Protected Mode" is a new feature in Reader X that allows for a "sandbox" security layer in Reader. You can read up on that here: http://blogs.adobe.com/livecycle/2010/11/technical-details-of-adobe-reader-x-protected-mod e.html
While it does prevent you from opening up certain PDF's directly, we've only seen this when opening up files over our network. The message received was an "Access Denied" issue, and turning this off got rid of that.
In my scenario, I originally attemtped to update Reader 10.0.1 to 10.1.0 using SCUP and the published update. This caused my custom setup to be overwritten (customizations included default acceptance of license agreement, removing Auto Updater, and disableing Protected Mode). I then had to re-create a custom installation using the Customization Wizard with the 10.1.0 MSI file from the Adobe FTP site. After running this, I'm getting the above error now on machines that never had Acrobat.
That being said, Alex's suggestion of turning this on or off is not applicable b/c it's disabled based on my custom installation. The box is grayed out and I can't even enable/disable it anyway.
Anyone out there have a better solution?
UPDATE: It appears that Alex is correct. I removed the registry entry bProtectedMode from HKLM\Software\Policies\adobe\10.0\featureLockdown and was able to open all files w/out the message. However, I'm not 100% sure what this will do to other PDF files as we originally disabled this so that certain files could be opened. So far, this user has been ok with Protected Mode ENABLED, however, in a recent test, I was blocked from opening a web PDF b/c of it on my PC at my desk.
also appears others threads have been started (http://forums.adobe.com/message/3767559#3767559) so not sure when this may be looked at or answered.
Message was edited by: alarose20 -
System not allowing to use park workflow only for GL
Hi Gurus,
We have created workflow variant and selected release posting and release payment.
We want to use workflow only for GL document but when we are parking vendor invoice in fv60, system is not allowing to post parked vendor invoice and saying not released.
We want one user to park and post vendor invoice. Right now we are not able to.
Please help.
Thank youHi Mohit,
Post can be possible to next authorized level. Check settings or else go to FBV3 ,enter document number ,company code and year > Enter > where you can see the workflow tab > Click on that where you came to know how may release levels are assigned.
In same view > Click on system in menu bar > services for object > Click on workflow icon > where you came to know who is the next approver.
Regards
Mani -
ABAP Development and "End User License"
Hi all,
I'm happy to join to SDN!!!
I newbe in the forum, and therefore I don't know if I post in the right section.
I'm a Netweaver Architect and ABAP Developer.
In the past I worked as java developer, and with other programming languages.
I have a doubt: is it possible (or forbidden by SAP AG??) to develop an ABAP package (which, obiousvly, contains Z / Y Abap objects) and apply an "End User License" on it, i.e. on the ABAP code written? (I mean that the copryrights are mine, and I give an "End User License" to my customers (that buy the license), in order to get and run my abap code). I would avoid to sell my Abap package, but, if possibile, I would only give it according a "Use License".
May I do this thing without any problems, or have I to consider other aspects, like ask to SAP to reserve a namespace, or obtain SAP Netweaver certification for my ABAP solution, or other things?
(Infact the "End User License" that I mean is different from "SAP End User License")
Please, let me know your opinion and how or who could solve my matter.
Many thanks to all.
Best Regards,
AlbertHello,
Can you point us there in this thread please?
Kind regards
Ash Thomas
Sap Consultant
<a href=http://www.ashpeople.com>Sap Consultancy</a>
<a href=http://www.ashpeople.com>www.ashpeople.com</a> -
ABAP application and "End User License"
Hi all,
I'm happy to join to SDN!!!
I newbe in the forum, and therefore I don't know if I post in the right section.
I'm a Netweaver Architect and ABAP Developer.
In the past I worked as java developer, and with other programming languages.
I have a doubt: is it possible (or forbidden by SAP AG??) to develop an ABAP package (Z / Y Abap objects) and apply an "End User License" on it? (I mean that the copryrights are mine, and I give an "End User License" to my customers (that buy the license), in order to get and run my abap code). I would avoid to sell my Abap package, but, if possibile, I would only give it according a "Use License".
May I do this thing without any problems, or have I to consider other aspects, like ask to SAP to reserve a namespace, or obtain SAP Netweaver certification for my ABAP solution, or other things?
(Infact the "End User License" that I mean is different from "SAP End User License")
Please, let me know your opinion and how or who could solve my matter.
Many thanks to all.
Best Regards,
AlbertHi Albert,
I thing you are doing some mistaken, please read carefully SAP licence agreement or send query to SAP they will reply accordingly.
Regards,
Anil -
1 user license access multiple database
Hi all...
I have a question :
In SAP B1 8.8, can 1 user license (for 1 physical user) access multiple databases?
Multiple database is created for Head Office and Branches.
Since Finance Accounting Manager is centralized at Head Office, so the Manager must have access to multiple databases.
Can only 1 user license applied to this Finance Accounting Manager?
Regards,Hi Ingrid,
Finance/Logistic/CRM Limited will perform as professional user license in the multiple db accessing in one server except the functionality authorization. You must make sure that all the users that use the Finance/Logistic/CRM Limited license have the same user code in the dbs
JimM
<ultra - said it once> -
Creative Suite Multi User License
is it possible to buy a multi user license for CS4 or CS5 for PC? I only need 3 users.
Do you know how amny you need to buy and where you buy them from?
Quoting MichaelKazlow <[email protected]>:
It is possible, but I think 3 users is too few.
> -
User Type (Dialog , Communication etc) can impact on SAP User Licensing
Dear Expert,
The User Type (Dialog, Communication, System etc) can impact on SAP User Licensing.
Suppose if I craete a user type other than DIALOG such as SYSTEM or COMMUNICATION etc; will this be counted as License User. Or only DIALOG users are paid license users.
Kindly advice.
Regards
AJThanks Uday and Nagendra...
Dear Nagendra,
with reference to below sentense from your referred link
" Consolidating Contractual User Types
Use
With this procedure, you consolidate the contractual user types of the individual users. The LAW takes account of the fact that certain contractual user types are already contained in others. In this way, license costs are only incurred for the inclusive user types of the user."
When I go User Classification Display screen, under Contractual User Type column all my 150 users are marked "Operational" but for those which I defined as System / Communication User are defined any contractual user type.
What does it mean??
Thanks in advance for your help.
Regards,
AJ -
Hi,
Does anyone can help us out with Oracle User Licensing.
We have most of the users as iExpense user or requisition users, means they use oracle only for entering their expense report or creating requisition. Does anybody have clarity that whether we still need oracle license for them?
Or is their any mini/small kind of license for these group of employees?
Say in a company of 5000 employees, only 200 uses oracle but do we need to buy lincese for all 5000, since we have to provide them iexpense responsibility for their expense report?
Any clarification on this matter is highly appreciated.
Thanks,Thanks Srini for your quick reply.
Before we go to Sales rep, we wanted to see if some companies have negotiated for iExpense user or temp user rates.
It will not make sense to buy the licence for 5000 users when only 200 are active users and 4800 are only iexpense or requisition users.
If we ask this question to oracle rep, they are bound to try to sell the full license to us.
Have you heard of situation like us anytime?
Maybe you are looking for
-
NullPointerException: setting value for CMP EJB with 1:n relationship
Hi all, I have two CMP Entity EJB with relatioship 1:n. Setting any value for second entity throws NullPointerException I'm using SAP NWDS 7.0.16 server-side: sap.com/SAP-JEE 7.00 SP16 So far I've seen [this|CMR Nullpointer Exception; thread, discuss
-
I can not do all the gestures when I am in FireFox. Example Pinch to increase or decrease size of window. Tap with two fingers to increase the size of window. The other gestures like scrolling, swiping etc work.
-
Address book disappear, Application Support folder can not be opened
My address book disappear from my MacPro, I know it is in the User Library-Application Support folder, but when I try to open that folder, it has a red tag on the folder and it said I have no Authority to open that folder, I am the only one using thi
-
Oracle NoSQL through Servlet.
Hello Everyone, I am trying to execute the nosql operations on server through servlet. I want to make an client server application but dont know why the CONNECTION TO KVSTORE IS NOT ESTABLISHED WHILE EXECUTING ON SERVLET. So is there any separate con
-
Screen Sharing Observe Quality
I found on a few web site a handy tip to change the quality of screen sharing. The tip says that opening terminal and typing: defaults write com.apple.ScreenSharing controlObserveQuality # Where # is the quality of the screen sharing: 1=black and whi