11.5.10 UI Custom Button to Remove/Delete an Instance?

Hello,
I'm in 11.5.10 and I have created a UI from scratch for my base model and on it I have created a Custom Button with the the Associated Model Node->Specified->My Sub Model along with the Button Action->Add Instance. When I test the model i'm able to click my custom button that I made to make as many instances of the child model as I want, however, when I go to the UI in developer mode for the child Model i try to make a custom button for it but there is not a delete instance action. Leading me to my question, how do I then delete the child models that i have spawned off? Like say on my main model I clicked my add instance button 5 times but then I decided i would like to remove one of them, how to do this?
Thanks

Hi;
In that it mentioned how to create custom top but i want to remove itI know :) As i said make steps from reverse(start from application than delete files from OS)
Regard
Helios

Similar Messages

Edit button in uitableview (possible to create custom buttons)

Hi
Instead of Edit button in the UiTableView, we can create a custom buttons. Basically once we clicked the edit button it shows the option (delete button) to delete the corresponding row.
Like that is it possible to create a custom button? Clicked on custom button, instead of delete button can we show other buttons (ok/cancel), rather than delete we can do any other action?
Thanks
mindus

You can add a button using custom javascript. but this could potentially have performance issues. please test the performance and functionality if you implement a lot javascript
see this link : http://helponmyproject.com/TTOCOD/
Regards,
Royston

Hide or remove delete button - ESS personal data iView

Hi, regarding for example ESS(50.4) personal data overview iView.
How to hide or remove delete button in the personal data overview iView screen(I know that this can be done on the ITS server side (web studio), but I want to do this in R3)
/Best Regards
Patrick

Achim was right on. Edit/Change the Internet Service in R/3. A few things to consider though....
(1) if using the original service, you may want to create a copy of theme 99 into your own theme (any number will do...99 is just the default theme). If doing so, be sure to change the service's service file (yeh, I always loved that about SAP's naming) to point the ~theme paramter to your new theme.
or
(2) Copy the entire service into your own "Z" service. Then modify the templates as you wish. You will need to point the iView to this "Z" service too.
Also, it is best to do it via SE80 vs. file level because then it will be part of a transport and follow the correct path through the landscape.
Now, if you really want to go back to R/3....find the function module or program the transaction code for your service actually calls, make a "Z" version of it, modify it, create your own "Z" t-code to call it, and THEN modify the internet service's service file (either the original SAP one or a custom version) to call your new "Z" t-code. Lot of work...yes, I know....but that's the way it's done if you gotta get back down to the ABAP level.
Hope this helps!
Message was edited by: Christopher Solomon

Custom Buttons

Hi Gurus,
I want to create some custom buttons on Runtime Prompts (like Add, Remove etc)?
How I create Custom button and associate to the Business Rule?
Thanks & Regards,
Sravan Kumar.

Hi,
I explained how it was done in the post, but here we go again.
Go to Administration > manage menus > "WFPMenuNewHires" > Edit > "1.1 AddSalaryTBH"
See the input boxes
Window Title:
OK Button Label:
Cancel Button Label:
You can put your own values in these boxes so when a business rule it opened then the "OK","Cancel" button use the custom values you have entered, so for example you can change the "OK" button to "Add"
Cheers
John
http://john-goodwin.blogspot.com/

ID CS3 Custom button limit?

Hello All,
This is a weird one. Seems to be a bug with creating buttons in CS3 (5.0.2) or how Acrobat recognizes those buttons. I'm adding multiple custom buttons to a single page (a master page) and all is fine until I create more than 16 buttons or so. When I export to PDF, it opens in Acrobat as a form. I don't want a form! (I thought you could only convert to a form in Acrobat Professional?) When I delete a few buttons, the PDF is fine. I've done this in several new docs, with the same result.
I have a glossary that I'm trying to add thumb tabs for each of the letter sections (like you see in a dictionary), but with roll overs and links to the text anchors of each section. "A" button goes to "A" section, etc. As I said, everything works perfectly up to about letter "P" or so.
I'm wondering if there is a limit to how many custom buttons you can have in a document and/or single page. Not sure what is triggering it being recognized as a form, but this seems to be related.
Anyone having any issues with creating buttons?

Hi Ken,
Thanks for the quick reply. Appreciate your help again.
I was just looking into trashing prefs when you mentioned it. Trashed both ID and Acrobat prefs. No go.
Some interesting observations I've made:
1. Exporting 2-3 pages at a time doesn't create the form issue, but it returns when I combine the PDFs (some text anchors no longer work, of course). All of the separate PDFs opened fine. (very odd)
2. Including the buttons on either the left or right master page (not both) doesn't cause the issue. I want to include on both, naturally.
3. Including the buttons on the direct pages (not masters) is problematic, also.
If I click the Form icon to remove the form bar and save, would users still get the bar, do you think? That's my main concern. I don't want it to come up when it's not a form. :)
Any thoughts, Dave or Bob? You guys have also given me great advice in the past.

Cp6 - How do I save custom button images?

Hello all,
I have a project which uses custom buttons. When I click on the button, from the stage, I see the button and other custom buttons in the Properties/General section (as Image buttons).
The problem is that these buttons are embedded in the project. How do I save them to the hard drive so that I may edit them? I see no option to save them in their 3 states (over, up, down).
BTW, as I mentioned, they are currently embedded in the project and they are not located in: Adobe Captivate 6 x64\Gallery\Buttons
Anyone?
Thank you,
Doug

Hi Charles,
last week Kirby Krieger and me did a little investigation in vanishing button sets; you may wish to have a look at this thread: Control Bar Button Sets Drop-down shows non-existing Sets "Wedding", "Sports", "Animals". I wonder, if your button sets vanish for the same reason, switching between libraries.
When you close Aperture and restart (a regular "quit", not "force quit", I assume, otherwise all will be discarded ) then the button sets will be stored in your Aperture Library, and in the System Preferences file
~/Library/Preferences/com.apple.Aperture.plist Aperture stores the name of the button group last selected.
So the button sets are bound to your library. If you switch between Aperture Libraries, and the other Library does not have a button group by the name you last selected, then Aperture will fall back on the default button set. By clicking the "Edit button" in the keyword controls and selecting one of your previously defined set in the left columm of the button editor, usually your button sets should reappear. Does that apply to your case? Do you switch between multiple Aperture Libraries? Then make sure to select a button set group that is defined in all libraries before quitting and switching to another library. Also your Aperture Preference file might be locked or corrupted. Then it might help to remove the preference file as described in Aperture 3 Trouble Shooting Basics http://support.apple.com/kb/HT3805
The import/export buttons:
You can save your button set to a file, and when you switch to another library, you can import the saved file to use the same button sets with that library. Export and Import should not be necessary, if you are only quitting and reopening the same library.
Regards
Léonie

ILife 06 Installation: No Custom Button

I recently purchased iLife 06 and started the installation and it said that it needs to run a program to make sure it can install it. So I click Okay and wait, then it says it can't install iPhoto on this computer because it's unsuported. My mac meets al the requirements. It says to use the custom button to install the apps individually but there isn't a custpm button ANYWHERE!!! Does anyone know what to do?
Mac OS X (10.3.9)

If, as Terence pointed out, you only have 754MB of free space on your boot drive then you're in really big trouble. It's generally recommended to have a minimum of 10G free space on the boot drive, more if possible. You won't even be able to burn a CD as the system required an equal amount of free space to create a temporary CD image.
You need to find a way to backup and move a lot of files off your boot drive. An external FW HD is the easiest way to backup your files and clean up your boot drive. You can also recover some disk space by running Monolingual to remove the unneeded language modules. I saved about 900 MB the first time I ran it.
Once you get your free space situation corrected you can address getting iPhoto 6 on your Mac. What Mac model do you have? I've only found models with 733MHz chips, not 700 MHz.
The specs for iLife 06 are:
System Requirements
Macintosh computer with a PowerPC G4, G5 or Intel Core Duo processor; 733MHZ or faster required for iDVD
256MB of RAM; 512MB recommended
Mac OS X v10.3.9 or Mac OS X v10.4.3 or later; Mac OS X v10.4.4 recommended
If you Have a G3 machine you can use iPhoto but some of the advanced editing capabilities will not be available. Also you probably will have to use Pacifist to locate the iPhoto install package on the iLife disk and install it.
But first you have to get some free space on your boot drive.
Do you Twango?

Add on custom button to ALV toolbar in std tcode ME51N, ME52N and ME53N.

Hi All,
I have the requirement to add on the custom button to ALV toolbar in ITEM OVERVIEW for standard transaction ME51N, ME52N and ME53N. Does anyone know what enhancement point or user exit i should apply and how i can add on the custom button?
Thanks.

There are no user exits or badi's for COOIS. You may have to make copy of the PPIO_ENTRY to ZPPIO_ENTRY including all the varians without changing their names like copy SAP&COOIS to SAP&COOIS. Create a T-Code ZCOOIS and replace COOIS in variant SAP&COOIS to ZCOOIS not in the name of the variant but in the field "Check Authorization for".
The PF-Status is found in the include LCOISOUTPUTF16 which is located in the function group COISOUTPUT you may have to copy that too. Finally you need to copy SAPLCOISOUTPUT with its GUI status GENERAL and add your custom button there.

How to remove the the standard button APPEND/INSERT/DELETE in webdynpro alv

Hello,
how to remove the the standard button APPEND/INSERT/DELETE in webdynpro-abap alv
Thanks
Rakshar

Use this.
    data lo_cmp_usage type ref to if_wd_component_usage.
    lo_cmp_usage =   wd_this->wd_cpuse_alv1( ).
    if lo_cmp_usage->has_active_component( ) is initial.
      lo_cmp_usage->create_component( ).
    endif.
    data lo_interfacecontroller type ref to iwci_salv_wd_table .
    lo_interfacecontroller =   wd_this->wd_cpifc_alv1( ).
    data lo_value type ref to cl_salv_wd_config_table.
    lo_value = lo_interfacecontroller->get_model(
    data: lr_std type ref to if_salv_wd_std_functions.
    lr_std ?= lo_value.
    lr_std->set_export_allowed( abap_false ).
NOte: ALV1 is alv component name
Regards
Srinivas
Edited by: sanasrinivas on Dec 1, 2011 6:11 AM

Custom button on ALV report for Tcode FL10G ?

Hi All,
I want to add custom button in the AVL report for FL10G transaction. And then need to implement logic for that button (calling BAPI to create shipment for the selected records).
For VL10G alv program GUI Status - STANDARD001 I think I can add button in this gui by using access key.
But how to implement logic for this custom button? Where I can put the code for this button logic?
Please let me know if any one has any ideas on this issue.
I appreciate your help and time on this.
Thanks.
M

Hi Murali,
The standard program it will not allow to copy the GUI Status. Because source and target program should not same.
It will definitely debug will work. Yo can create the GUI Status through SE41. In SE41 Just give Program name :SAPLV50R_VIEW click the button status. here you should not give any gui status. just blindy say create the then it will popup screen appears in the screen. Here you can mention your Z GUI Status. It is not required to create all the menus manually instead of the there is button which is located in the screen next to blue i button. here you can click and select the standard interface. You can get all the menus as similar to standard. Like that you should create Menu Bar, Application Toolbar and Function Keys Menus. Then you can add your custom button in the Application tool bar button.
When you execute the Transaction VL10G and check your cusom menu button will appears. Once you click custom button only exit will trigger. Find the below code for your reference.
CODE
        loop at ct_postab assigning <fs>
                where selkz = 'X'.
*To Fill the BAPI Header Parameters
              str_ordhdr-ship_cond = w_sval-value.
*To Fill the BAPI HeaderX Parameters
              str_ordhdrx-updateflag = 'U'.
              str_ordhdrx-ship_cond = 'X'.
              call function 'BAPI_SALESORDER_CHANGE'
                exporting
                  salesdocument    = <fs>-vbelv
                  order_header_in = str_ordhdr
                  order_header_inx = str_ordhdrx
                tables
                  return           = str_return.
            endloop.
            read table str_return into w_return index 1.
            if sy-subrc eq 0.
              if not w_return-type = 'S'.
                message w_return-message type 'E'.
                leave to current transaction.
              endif.
            endif.
*Do the BAPI Commit
            call function 'BAPI_TRANSACTION_COMMIT'
              exporting
                wait = 'X'.
          endif.
        endif.
      endif.
Let me know if you have anything to discuss on the same.

How can I create a custom button for opening a form?

I have a parent form having child forms. In my main form I want to create custom buttons for opening child forms. I want to use master-detail form but there are more than one child forms, and in master-detail form I can only create one detail form. So I will create a form based on a table and in that form I will call the child forms by custom buttons. Can I do that?
Thanx,
Gulsah.

This can be easily done. First open up two instances of your Portal. In one window, you will need to go into your component you wish to link FROM. In the other window you will need to go into your component you wish to link TO. In the component you wish to link TO there will be a moduleid. Note this somewhere. Then, you will see an area that says: "Call Interface: Show". Click on this. (In the window you are linking to.). In this window, you will see a bunch of stuff. At the bottom you will see a URL call. This is the call you need to use. At the top, it explains each piece of the URL call. Just subsitute YOUR appropriate information into the URL call. In the form you wish to link FROM, create a button. Once you create this button, it will appear at the bottom, click on it and you will see an area to insert a Javascript. Click the onClick and insert:
//this is the variable you want to pass from one form to the other
get_field_name = getField(this.form,'COLUMN_NAME_IN_DATABASE');
//this is so you can open the "child" form
window.open('/pls/cc_prod/DAD_NAME.wwa_app_module.link?p_arg_names=_moduleid&p_arg_values=MOD_ID_HERE&p_arg_names=_sessionid&p_arg_values=&p_arg_names=COLUMN_NAME_IN_DATABASE&p_arg values='+GETFIELD_NAME+'&p_arg_names=_COLUMN_NAME_IN_DATABASE_cond&p_arg_values=%3D');
In the fourth tab, where it says, "....before displaying form" insert the following: (This will tell the form how to handle the getField function.)
htp.p('<script language="JavaScript1.3">
< !--
function getField(form,fieldName)
var objName = "";
var tmp = "";
var dAction = "";
var sel_idx = 0;
var cnt = 0;
var instance = 0;
var slicedName;
var fillData = new Array();
for (var i = 0; i < form.length; i++)
slicedName = form.elements.name.split(".");
tmp = slicedName[2];
instance = parseInt(slicedName[3],10);
if (!tmp)
continue;
objName = tmp;
if (objName == fieldName)
return form.elements[i].value;
//-->
</script>');
I hope this helps.
null

How can I open a URL from a Custom Button in a second help window?

I have a custom button, which currently opens a URL in a web
browser, using a redirect page. How can I change this so that it
opens in a second help window instead? If I understand some of the
posts I've read, it is possible by linking the button to a related
topics function but I've no idea how this is done.
As usual, your help is most appreciated. Thanks a lot.

Hi, ecoulyn,
You need to make a topic file like the one below the target
of the Jump button.
The onLoad function on the Body start-tag causes the Related
Topics command to fire when the topic file is loaded in the topic
pane. When specifying the file name of the topic to display in the
secondary window, you must always prepend it with the name of your
.chm file, followed by "::/". Otherwise, an error message appears
when the Jump button is clicked.
Pete

How to create a custom Button in a SNP planning book

Hi Experts,
I created my own Planning Book and Dataview in SNP with 3 Key Figures: KF1, KF2, KF3. Now I want to create one my own button with Macro so that when I press that button, the Macro will run to calculate: KF3 = KF1 + KF2.
I know that I can drag this Macro to one of default events like: Default, Level Change, Start. But actually, I want to create my own button so that I can handle the event as I want.
My question are:
1. How to create a custom button on the toolbar of SNP Planning book and writing macro for the button?
2. Please give me any document, material teaching about writing macro and relating to my above scenario.
Thanks very much!
Duyennx
Edited by: xuanduyen on Sep 6, 2011 9:20 AM

Hi,
Access the transaction "/n/sapapo/advm". In the list select your planning book/ data view and click 'Start Macro Builder' button.
In the Macro builder screen, drag and drop your macro from Macro depot to the work area.
Right click on your macro name and select 'properties'. In the pop up, next to the Assigned Push button field, there is a button 'Choose'. Click that. It will display all the available icons. In standard system, it displays more than 1000 icon. Choose any one icon which is suitable for your macro function. Close the pop up and save the macro. This will assign a push button to your macro.
In the Planning book tool bar, you can see the selected icon in the header tool bar. Just by clicking that icon, you can execute the macro interactively.
And I don't know whether we can include/design our own icon. But there are already 1000+ standard icons to choose.
Regards,
Manimaran M.

How to add a custom button in WD screen to call a workflow in siebel?

Hi All,
We have a requirement to have a custom button at the summary screen(after the rule execution) "Create Opportunity", on clicking on it a new opportunity record should be created in Siebel. As we know the "Save" link calls "PolicyAutomationSaveSession" inbound web service method and saves the information in session table and we can modify the PreSession and PostSession workflows. But we are not sure how it calls the service method and where is the mapping defined.
Can you please help me on how to add a custom button and how to invoke a workflow in siebel side to implement this requirement?
Also is there any document which can help me to add a custom button in screen and to add the code behind the button?
Thanks in advance!!
Regards,
Subhradeep

Subhradeep,
Closing a Web Determinations window is essentially the same as closing any HTML window. It involves javascript, which you would have to add to the Web Determinations templates.
Essentially the javascript command to close a window is {{window.close}} or {{top.close}}
For timing, you might be able to use the setTimeout function of Javascript (see: http://www.w3schools.com/jsref/met_win_settimeout.asp)
At the risk of exposing exactly how bad my javascript skills are, I have attached a super-simple html fragment, a page that closes itself after 3 seconds. It may help you get started in the right direction. In general closing a window is a fairly dubious activity and is often not permitted by certain browsers. This html page at least works in Internet Explorer.
<html>
     <head>
     <script language="JavaScript">
          setTimeout(closeMe, 3000);
          function closeMe() {
               alert("This window will close");
               top.close();
     </script>
     </head>
     <body><B>This window will close in three seconds</B></body>
</html>
{code}

Add a custom button on notification page and open a oaf page after button

Hi All,
My Requirement is add a custom button on notification page and after button click with take some parameter from notification page like supplier_id and org_id then open a new oaf page and show supplier credit and debit balance but problem is that button is only enable to a ap invoices notification not for other type of notification.
how to take approach/action i don't know.
it is possible through OAF personalization/customization or it is part of work flow customization.
Navigation path - payable->worklist->open notification and Type of notification also there
Type should be matched with AP_Invoices type notification then custom button enable.
Please Let me know is it possible or not. If possible how to achieve this. ...................................it's argent...plz help me
Edited by: 815572 on Nov 25, 2010 1:15 AM

Hi Irk,
My notification came in given below format (in table) but my custom button only enable for Contract Approval Type not for others..........i hv attach a button on notification page (subject-Contract 21969-R17......)
From Type Subject Sent
Taylor, Phillip Contract Approval Contract 21969 - R17-AUG-07 06:19:27 has been approved by Taylor, Phillip 22-Aug-2007
Taylor, Phillip OKS Contract Process Contract 21975 - R17-AUG-07 06:22:18 for AT&T Universal Card (52,500.00 USD) has been published online 19-Aug-2007
Taylor, Phillip OKS Contract Process Contract 21969 - R17-AUG-07 06:19:27 for AT&T Universal Card (15,000.00 USD) has been published online 19-Aug-2007
If I just put a button SHOW BALANCE just like notification button APPROVE, REJECT, REASSIGN but this button shows all types of notification and my req. is this button show only for Contract Approval type notification. how to handled this issuesss ?
if extend the co of notification page then how to handle TYPE value from worklist page ....please write proper code if u hv any idea...........
Thanks,

11.5.10 UI Custom Button to Remove/Delete an Instance?

Similar Messages

Maybe you are looking for