11.5.9 on windows - IP change

Hi,
Every one I have production EBS 11.5.9 single tier on Windows 2000. Now
I want to relocate it to different premises and also want to change
following:
1. IP
2. Domain name
3. DNS
4. Gateway
What will be the impact on EBS 11.5.9 ??? or there will be no problem.

It should not have any impact. Just make sure you run AutoConfig successfully after doing the necessary changes.
Note: 338819.1- How To Use Autoconfig To Change The Hosts Name And/Or Domain Name
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=338819.1

Similar Messages

I bought a new laptop with Windows 7. My computer name in Windows has changed, and now, my Ipad can't find Itunes

I bought a new laptop with Windows 7. My computer name in Windows has changed, and now, my Ipad can't find Itunes, and Itunes can't find my Ipad. [email protected]

Ok, if reinstalling iTunes as suggested above does not resolve the issue of iTunes recognising the iPad then try this -
Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
Secondly, try all the other ports on your computer, even a number of times.
Thirdly, make sure your lead /connections are no faulty.
Fourthly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
Failing all that, see here - http://support.apple.com/kb/TS1538
And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://www.apple.com/support/ipad/assistant/itunes/
As for making your new laptop your 'home computer' follow these instructions -
1. Without connecting your iPad to your computer -
A) Install iTunes / make sure the latest version of iTunes is installed.
B) Go to the Store tab and click on "Authorise This Computer".
C) Go to Edit, click on Preferences [iTunes and Preferences on Macs] and click on Devices. Put a check mark in the box next to "Prevent iPods/iPhones/iPads from syncing automatically". Click OK and close iTunes.
2. Connect your iPad to your computer -
A) Start iTunes (it will not start automatically because of the action at 1(C) above).
B) Right click on your iPad under Devices in the left column. Select "Transfer purchases".
C) When the transfer has completed, right click on your iPad again and select "Backup".
D) When the backup has completed, left click on your iPad, click on the Apps tab, and put a check mark in the box next to "Sync Apps", and then click on "Apply" (bottom right).
E) Unless you want to always do a manual sync (as I do), go back to Edit, Preferences [iTunes and Preferences on Macs] and uncheck the box next to "Prevent your iPod.....".
F) Finally, on your iPad, check that everything is syncing properly. If not, go back to iTunes and check all settings.
NB You should not lose any apps. However, any 'purchased' missing apps can be downloaded again FOC. As with updates, this must be done with the Apple ID under which they were originally 'purchased'.
Also see here as to moving your music to your new computer -
http://support.apple.com/kb/HT4527

How to stop showing the pop-up window to change password

Hi,
How to stop showing the pop-up windows of changing password if the password is expired in dba_users table. This is related to form6.
Pls advice.
Thanks
Raj

Raj,
Please do not start a new thread with the same problem. If you still need help, respond to your former thread, and we will still try to help you. But you haven't provided an answer to why you can't trap the error.
Re: Trapping of error ora-28001, user expired in daa_users table

Get rid of message: "If you close the window, your changes will be lost..."

Whenever I enter text, then close the window, I get the message, "if you close the window, your changes will be lost. Do you want to close the window anyway?"
Yes, I do want to close the window, and I want to get rid of this message from popping up. Can't find it anywhere in Safari. Please help me out. Please, how do you configure Safari so this message will not pop up?

HI David,
From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset. Relaunch Safari. If you still see that dialog...
Go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop.
Relaunch Safari and see if that makes a difference. If not, move the .plist file back to the Preferences folder. If Safari functions as it should, move that .plist file to the Trash.
Carolyn

Portege R700 - fonts in main Window has changed

Hello,
I have pre-installed on my Toshiba Portege R700 AuthenTec Truesuite version 3.0.1.149. After couple of days of good performance the font from the main window has changed becoming impossible to read. Probably I change some settings in Windows and also this font changed because for sure I did not change anything in your application. Having in mind that my OS is Windows XP Professional, SP3, pelse be so kind and help me with a solution to revert to standard fonts.
thank you,
Best regards,
Cristian

Hi
I assume you are speaking about the fonts in the Internet Explorer window.
Right?
Please check the option View in the menubar. Zoom should be set to 100% and Textsize should be set to medium.
Furthermore you can check the settings in control panel -> display -> Appearance tab
There you will find option called Font size. In my case its set to Normal.
Try it out.

Export window format changed, don't know why

You know aperture is a love/hate relationship. What do I love? I became an advanced user fast, it's intuitive, but the bugs are just maddening and apple has never responded even once to my countless bug and crash reports. Apple has strayed so far from computing as it's central focus... the impression I get is they just don't care about my bug problems or if I stay an apple customer after owning that little baby Duo laptop, PowerPC, ibook and now MacBook Pro. I think that's sad. Just keep pushing the phones and ipods- Steve, and don't worry about me. I'll eventually just go away. That said, the format of the export window changed to first line: export preset, 2nd line: Subfolder Format, 3rd: "Grayed out" customer subfolder name, 4th: Name Format, 5th: Custom Name, 6th: File Name Example. To my knowledge, this new export window format changed without any action on my part. I don't like it because I can no longer just export it to the desk top without it being automatically put in a folder. The old export window format just had an option for tiff, jpg, psd and a name to type in and where it was heading. How do you get back this old export window format? This is baffling like the disappearing library in the trial version every time you shut down and restarted.

Addressing your final remarks, I don’t see any problem. First: have your current Preset -> Image Export set to what you want in terms of JPEG or PSD etc. Second select the image(s) you want to Export. Select something like File -> Export -> Versions (or whatever you want). The Export panel defaults to the Desktop, and the images will be placed there - no folder is required.
Maybe I’ve missed your point, but I don’t see any problem.

Hello, I've got a Upgrade-Version of CS5.5 for Windows and changed to a Mac. Now I need the Mac-Version. I tried to install the Download from Adobe. Unfortunatly it didn't accept my password. I guess cause of the Upgrade-Version or the Windows Version I o

Hello, I've got a Upgrade-Version of CS5.5 for Windows and changed to a Mac. Now I need the Mac-Version. I tried to install the Download from Adobe. Unfortunatly it didn't accept my password. I guess cause of the Upgrade-Version or the Windows Version I own. My System: Mac OS X 10.6.8, 2,8 GHz. Thanks for answers! Greetings, Eva

Here is a link to the info regarding platform swaps.
Order product | Platform, language swap
If you want to try to contact Adobe support to try to get an exception, Start Here after selecting relevant responses choose "Still need help? Contact us." and the chat contact (or phone) option.

Adobe Reader, MS Office window size changing when switching displays

I have a current generation (mid 2012) MBP with Retina Display running ML 10.8.3. I also have a Dell U2413 monitor, confgured for
1920x1200 resolution, connected via a Thunderbolt to Display Port cable that came with the monitor.
When I switch displays, Adobe reader, Excel, and Powerpoint all have their window sizes change dramatically. Reader
shrinks to just the status bar and is tucked in the very bottom left hand corner (it took me quite some time to even see it
was there at all); Excel windows expand dramatically to be much larger than full screen, and Powerpoint windows shrink
to about 1.5" square. Other windows (Mail, Chrome, Safari, iTunes) change or move slightly but are more or less OK.
I know this problem is expected when switching to an external monitor with dramatically lower resolution (e.g. old In Focus
projectors) but I don't believe it should happen with a hi-res monitor like the one I'm using.
I have compared this behaviour with other users running same SW versions and external monitors with the same
resoultion and they don't see this problem so I'm guessing there's some configuration option or low level setting
that is messed up.
These window size changes happen going both from internal to external and external to internal. Any ideas?

I have a current generation (mid 2012) MBP with Retina Display running ML 10.8.3. I also have a Dell U2413 monitor, confgured for
1920x1200 resolution, connected via a Thunderbolt to Display Port cable that came with the monitor.
When I switch displays, Adobe reader, Excel, and Powerpoint all have their window sizes change dramatically. Reader
shrinks to just the status bar and is tucked in the very bottom left hand corner (it took me quite some time to even see it
was there at all); Excel windows expand dramatically to be much larger than full screen, and Powerpoint windows shrink
to about 1.5" square. Other windows (Mail, Chrome, Safari, iTunes) change or move slightly but are more or less OK.
I know this problem is expected when switching to an external monitor with dramatically lower resolution (e.g. old In Focus
projectors) but I don't believe it should happen with a hi-res monitor like the one I'm using.
I have compared this behaviour with other users running same SW versions and external monitors with the same
resoultion and they don't see this problem so I'm guessing there's some configuration option or low level setting
that is messed up.
These window size changes happen going both from internal to external and external to internal. Any ideas?

New window behavior change FF 29.0.1

New window behavior changed with FF 29.0.1. I have a custom page that I built that has a bunch of links to sites/pages that I visit frequently. Every one of the links on that page begins with <a target="_blank" href=" >
I typically keep this page maximized and until FF 29.0.1, when I clicked one of those links, it opened in a new maximized window. If I had the page restored instead of maximized, when I clicked one of those links it opened in a new restored window. In other words, the new window was opened in the same window state as the page from which I clicked the link. Now, when I click a link on a maximized window, it opens in restored view and I have to manually maximize it. It's a pain in the patoot.
I'd like to know how to change FF to return to the previous behavior and also why someone felt it was necessary to change this behavior.
''edited the HTML coding that prevented this message from being completely displayed''

You can check for problems caused by a corrupted localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf

Is a window title changer app possible?

I haven't been able to find an app for Mac that lets you change window titles for any currently-open windows (the same way http://www.murgee.com/window-title-changer/ does on Windows). I know Terminal has this functionality built in, but I'd like to do this for my IDE and other windows as well to make it easier to commad-tab to the right window.
Does anyone know of an existing app that does this?
If not, is such an app even possible or does the OS disallow it?
Thanks
-Ben
System: Macbook Pro - OS X 10.9.5 (13F34)

hi, there is no such app because OS X prevents this sort of stuff to block viruses. you won't find this on Macs.

How to unlock windows desktop change w/ Resource Hacker?

Is it possible? to unblock windows desktop change w/ Resource hacker?

Resource Hacker is not a Microsoft product and is not supported in these forums.
For assistance with your question contact the publisher of the software @
http://www.angusj.com/resourcehacker/
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Can you change the default code that targets a new window to change the content in a div tag instead

I created a database for store locations. I was able to display the list of stores. Here though I don't want the list to show the number in front of it... I still need to find the CSS to edit my results for this one. However, more importantly, I don't want to open my results in a new window, I want to be able to target a DIV tag instead.
This is the code that is created to display the list of stores.
{module_webapps,5665,a,,,_blank,,50,,1}
Currently it opens a blank window. I'd like to target a div tag on the right of the list area where the store info can appear.
Perhaps the gurus at adobe can upgrade this feature? Target DIVs instead of new or blank windows, or using frames. Below is the screen of the links created from the DB.
Below is the blank window that it opens.
Would like to make it open in a div to the right of the list. Not sure how to change to core code that was created to make that change.

I'm doing something wrong. I have the list showing the stores in CA
<div class="flip" id="woodcontainer" style="width: 160px; height: 23px;">
<h1>CALIFORNIA</h1>
</div>
<div class="panel">
<script>
$("#infochange").load("{module_webapps,5665,c,41140}"); /* this creates the list of stores in CA where #infochange is the DIV I am targeting.
</script>
</div>
<br />
The code for the DIV where I want the details to load.
<div id="infochange"></div>
This doesn't make sense because I need to have something in the DIV as a holder of some sort?

Error window while changing the value in SelectOneChoice.

Hi I am facing a problem on change of values in SelectOneChoice, "ERROR For input string: "N"
Below is how i am implementing SelectOneChoice:
I am creating values for SelectOneChoice in a Java class:
*SelectItem itemY=new SelectItem();*
*itemY.setLabel("Yes");*
*itemY.setValue("Y");*
*confirmation.add(itemY);*
*SelectItem itemN=new SelectItem();*
*itemN.setLabel("No");*
*itemN.setValue("N");*
*confirmation.add(itemN);*
Using this values in JSFF like this:
*<af:selectOneChoice value="#{bindings.confURLSubmitted.inputValue}"*
*label="Conference Website URL Submitted"*
*required="#{bindings.confURLSubmitted.hints.mandatory}"*
*shortDesc="#{bindings.confURLSubmitted.hints.tooltip}"*
*binding="#{backingBeanScope.EditComplianceDetails.confURLSubmitted}"*
*id="confURLSubmitted"*
*unselectedLabel="Select One"*
*autoSubmit="true"*
*valueChangeListener="#{backingBeanScope.EditComplianceDetails.OnConfURLSubChange}">*
*<f:selectItems value="#{pageFlowScope.generalLists.confirmation}"*
*binding="#{backingBeanScope.EditComplianceDetails.si1}"*
*id="si1"/>*
*</af:selectOneChoice>*
And in bean method i am trying to print the selected value in SelectOneChoice:
*public void OnConfURLSubChange(ValueChangeEvent valueChangeEvent) {*
*// Add event code here...*
*System.out.println("this.confURLSubmitted.getValue() "+this.confURLSubmitted.getValue());*
Now when i try to change the value in SelectOneChoice:
I am getting an error window "ERROR For input string: "N"
Any idea y i am getting this error.
Thanks in Advance

Remove selectOneChoice value binding and set static value and try
*<af:selectOneChoice value="XXX"*
label="Conference Website URL Submitted"
required="#{bindings.confURLSubmitted.hints.mandatory}"
shortDesc="#{bindings.confURLSubmitted.hints.tooltip}"
binding="#{backingBeanScope.EditComplianceDetails.confURLSubmitted}"
id="confURLSubmitted"
unselectedLabel="Select One"
autoSubmit="true"
valueChangeListener="#{backingBeanScope.EditComplianceDetails.OnConfURLSubChange}">
<f:selectItems value="#{pageFlowScope.generalLists.confirmation}"
binding="#{backingBeanScope.EditComplianceDetails.si1}"
id="si1"/>
</af:selectOneChoice>

Windows Vista: changes in ISAKMP

Has anybody experienced problems with Windows Vista? We have hundreds of customers which successfully connect to our Cisco router from Windows XP. They manually (via wizard) create VPN-connection using their login, pswd and preshared key (all other settings are set to defaults). Router is configured to use transport mode, l2tp, 3DES, MD5, DH group 2, and a preshared key. But when they try to establish the same VPN-connection on Vista they most often get error 789 (negotiation failed). May be there is some new policy or enabled option which affects ISAKMP in Windows Vista?

The problem proved to be simple: we had only one ISAKMP policy (encryption: 3DES, hash: MD5) and it was o.k. with Windows XP. But in Windows Vista MD5 is removed. Though it's possible to get back MD5 by editing registry of operating system, we just added another ISAKMP policy with "Secure Hash Standard" istead of "Message Digest 5" as hash algorithm.
For more details see: http://blogs.technet.com/rrasblog/archive/2006/11/01/vista-lh-security-changes-for-remote-access-scenarios.aspx

How can I use single hard drive for both Mac OS and Windows without changing the formats and reformatting?

I have a windows PC and a Macbook Air and a 1TB external hard drive. They said in order to transfer large files into the hard drive you have to change the format of your hard drive (which would be from MS-DOS to Mac Os extended) so how can I use my external hard drive on my windows PC without reformatting its files? Please heeeelp

Natively Windows can read and write to NTFS, FAT32, and exFAT while the Mac can read and write to FAT32, exFAT, and MacOS Extended.
Option 1: You can purchase driver software for Windows to allow it to read and write Mac's MacOS Extended or you can purchase a driver to allow the Mac to read and write to NTFS.
Option 2: you can format the hard drive for exFAT and use it with both Windows and the Mac without purchasing any special drivers. (Obviously the 4GB file size limit is why you don't want to use FAT32)

Satellite C875 : Windows reverting changes after update to Windows 8.1

For days now with no success, I have been trying to update from Windows 8 (64 bits) to Windows 8.1 a Satellite C875-153 (PSCBCE-03H002FR)
I am opening a new thread as none of the available threads on this forum have helped me nor my researched on the web.
*1st error* - which I was able to "sort of" figure out is:
-> *Windows 8.1 update fails with error message 0xC1900101 - 0x30018*
I have followed every steps, in the proper order, of this Toshiba guide, but it didn't help fixing the error:
http://www.toshiba.eu/innovation/generic/windows8_1-upgrade-stepbystep/
I then followed recommendation from this thread and was "temporaly" able to update OS to Win 8.1:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=296594
The step that worked for me was to remove network cable while installing windows 8.1 as suggested by user "RandyRoberts".
*2nd error:*
*-> Windows 8.1 hangs and system tried to revert changes back to Windows 8*
By unplugging the network cable, I was able to complete the update of Windows 8.1 and run it temporaly.
As soon as I replug the network cable and reconnect to the web, the computer hangs and restarts.
I suppose Windows 8.1 is trying to check the licence status and then refuse to activate it.
Windows ends up trying to revert changes and go back to Windows 8.
It hangs at restart and refuses to reload previous OS (Windows 8), leaving me on a screen with couple options. At this point I can only recover the factory image to be able to restart the system.
These steps have been performed on a freshly reinstalled OS with no additionnal softwares.
All updates and steps have been followed and recheck several times. I am runnning last BIOS available.
I have already saved all my data and burned the recovery disks .
Thanks in advance for any help and suggestions.

Hi GROM
I guess you found and read also this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=74631
the user harrie_1 were able to update to the Win 8.1 and the update procedure went smoothly.
I dont know exactly why this workaround did not function in your case but I would recommend you to start the procedure once again and follow the update as described by harrie_1 user

11.5.9 on windows - IP change

Similar Messages

Maybe you are looking for