11 pm modem mysteriously dialing, connecting, exchanging data

I've been trying to figure out why my PowerBook has been waking up at 11pm, dialing, making network connection and exchanging data with a remote server. I suspect that it's looking for a software update but have no assurance that it's not something more sinister. Is there an easy way to check for auto update settings?
I opened the modem connection log and found the following:
Mon Nov 28 21:00:19 2005 : Version 2.0
Mon Nov 28 21:00:19 2005 : Dialing without tone
Mon Nov 28 21:00:19 2005 : Dialing 503-584-9935
Mon Nov 28 21:00:47 2005 : Modem Reliable Link Established.
Mon Nov 28 21:00:47 2005 : Modem Compression Established.
Mon Nov 28 21:00:50 2005 : Serial connection established.
Mon Nov 28 21:00:50 2005 : Using interface ppp0
Mon Nov 28 21:00:50 2005 : Connect: ppp0 <--> /dev/cu.modem
Mon Nov 28 21:00:52 2005 : local IP address 67.2.58.212
Mon Nov 28 21:00:52 2005 : remote IP address 67.2.0.22
Mon Nov 28 21:00:52 2005 : primary DNS address 64.136.20.121
Mon Nov 28 21:00:52 2005 : secondary DNS address 64.136.28.121
Mon Nov 28 21:44:00 2005 : Terminating on signal 15.
Mon Nov 28 21:44:01 2005 : Connection terminated.
Mon Nov 28 21:44:01 2005 : Connect time 43.2 minutes.
Mon Nov 28 21:44:01 2005 : Sent 552238 bytes, received 14153183 bytes.
Mon Nov 28 21:44:03 2005 : Serial link disconnected.
I have a Netzero account and it is using that number for dialing in (503-584-9935.) After that it's all Greek to me.
I tried to track down the IP address (64.136.20.121) for a clue using the Network Utility software that is a part of OS X but that didn't help me. I checked System Preferences>Sharing and have everything turned off and the Firewall is on so don't understand how this could happen.
Appreciate any ideas anyone has on how to stop this and clues as to what might be causing it to happen.
Regards.
Ken
PowerBook Mac OS X (10.3.9)

Hi Ken,
Welcome to the discussions area.
My recommendation is to use a connection sniffer, such as Little Snitch, to determine which program is requesting the connection to the outside world.
I suspect the log details you've shown would be the same or similar when you normally create a connection ie. they're related to your ISP.
Graham
PBooks 1Ghz & 1.67Ghz, iMac 800Mhz, iBook 300Mhz, iPod mini & shuffle Mac OS X (10.4.3) Netgear ADSL WiFi, Airport Graphite, Squeezebox, SonyEricsson K750i, PalmIII

Similar Messages

Wifi is not available where I come from. I have broadband connection where data transmission is through cell sites then to USB modem connected to a computer. The modem draws power from the computer. Will this setup work with the ipad?

Wifi is not available where I come from. I have broadband connection where data transmission is through cell sites then to USB modem connected to a computer. The modem draws power from the computer. Will this setup work with the ipad?

iPad requires Wifi (or 3G /LTE) to connect to the Internet. You cannot connect a USB modem to the iPad.
You can create your own WiFi hotspot through your computer for your iPad to connect to, if your computer supports this functionality. All Wifi Macs and many Wifi PCs do. Check your computer manual for how to do it.

Connect two iMacs in order to exchange data

Hello everyone,
I am about to buy a new iMac and would like to connect my old iMac via wire to exchange data. I do not want to use the migration assistant as I want to clean up my data. So is there a way to connect these two computers in a way that the old one appears like an external device in the finder of the new one?
Sorry if this questions has been asked before but I have been browsing the web for the past 90 minutes in order to find an answer to this question - no luck so far or I am just searching with the wrong keywords.

There is a way to do what you want: Target Disk mode.
The only thing you need is a FireWire 800 cable and a Thunderbolt to FireWire adapter for the new iMac. After connecting both iMacs with the Thunderbolt cable, hold the T key while your old iMac is starting up to start up in Target Disk mode, so the old iMac's hard drive will show up in the Finder sidebar of the new iMac as an external drive. There you can transfer the files you want to your new iMac.
If you have got an old iMac with FireWire 400 instead, everything is much more difficult, because you may need a FireWire 400 to 800 cable too.
Another way would be to connect both Macs to the same network and transfer your files over Wi-Fi, but it is a long and slow process

IMac modem mystery

I set up a 600MHz G3 iMac (10.3.9) for a client; the modem worked fine when I tested it, but now she says it sometimes can't connect -- about "1 time out of 15". When it doesn't connect, it will fail repeatedly ("5 or 6 times in a row") but then work okay later in the day. The ISP says there's no problem; and once when the iMac wouldn't connect she tried right then with her PC and it worked.
I've looked at the Internet Connect utility's Connection Log; where a successful connection is logged thus:
(date & time) : Version 2.0
Dialing (number)
Modem Reliable Link Established.
Modem Compression Established.
Serial connection established.
Using interface ppp0
Connect: ppp0 <--> /dev/cu.modem
... and IP & DNS numbers are listed
An unnsuccessful connection is logged thus:
Connect: ppp0 <--> /dev/cu.modem
LCP terminated by peer.
Hangup (SIGHUP).
Modem hangup.
Connection terminated.
Does anyone have any idea what this means? Is the modem going bad (I thought modems either worked or didn't work, not intermittent)? "LCP terminated by peer" sounds like something happening on the other end. Anyone know what SIGHUP means? I can replace the modem if necessary, but it's a pain so I'd like to learn what I can first.

Thanks for your response. As it turned out, I discovered I was able to duplicate the problem on my iBook at my house, which pretty well ruled out a cause in either the iMac or the phone line at the client's house. Consultation with the ISP determined that it was probably due to how I had the connection configured, i.e. using "[email protected]" rather than simply "username". For some reason, 90% of the time that would work, but 10% of the time it wouldn't. So I've corrected that, and we're hoping the problem won't recur. (The tech also suggested entering the DNS numbers, rather than allowing them to be retrieved automatically; he said "Macs require that," though I doubt this is true -- certainly not for EarthLink, which I use.)

Test-OutlookConnectivity fails with '[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in different Active Directory sites'.

I have a two site DAG, and the command is running from the alternate site where the databases are not currently being hosted. The following command...
Test-OutlookConnectivity -Protocol:TCP -TrustAnySSLCert:$true -MonitoringContext:$true
...errors with the following output:
An error occurred while trying to access mailbox CurrentlyHostingMBServerName.InternalDomainName, on behalf of user InternalDomainName\extest_bb13200232474
Additional information:
[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in different Active Directory sit
es..
+ CategoryInfo : OperationStopped: (Microsoft.Excha...onnectivityTask:TestOutlookConnectivityTask) [Test-
OutlookConnectivity], CasHealthStorageErrorException
+ FullyQualifiedErrorId : F2F8AC0D,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
I thought this command would work based on the 'AllowCrossSiteRpcClientAccess: True' option on the DAG. The command works well if run a CAS server in the active DB site.

Hi,
Exchange 2013 users use Outlook Anywhere to connect to CAS server. You may run the RCA to test the connectivity:
https://www.testexchangeconnectivity.com/
Thanks,
Simon Wu
TechNet Community Support

I am getting the error "Unable to connect to data warehouse management server" when I try to register it DWMS

I have a Data Warehouse Server that appears to be functioning but is running System Center Service Manager 2010 (w/ out SP1), Also have a functioning Configuration Management Server with Reporting Services Point installed the is running System Center
2012. Both systems are VM's running Windows Server 2008 R2 Enterprise w/ SP1 fully patched. Both systems are running SQL Server 2008 R2 as well. When I try to register the Data Warehouse Server via the GUI using the console or in Powershell it errors
out. Particularly on the GUI with the error "Unable to connect to data warehouse management server". I can browse to it, ping it, get the configuration management reports to run and show my AD assets, etc... but it will not register the DWS. I have
tried every suggestion TechNet has to offer and I am hitting a wall. Can someone please, please, please help!?!

unplug modem and router and reboot.
check setting for network, verify password.
sign in. Enter computer information.
let me know if this works.

Have installed OSX Mavericks and Vodafone Mobile Broadband Modem no longer connects despite reloading its software. Now cannot reinstall OSX Mountain Lion

Upgraded to OSX Mavericks. Vodafone Mobile Broadband Modem no longer connects. Tried again after reinstalling latest Vodafone Modem software update for Mac OSX, but no use.

Could somebody give a feedback about the solution proposed by Bokir?
I am experiencing exactly the same problem after upgrading to Mavericks with the Huawei E220 modem.
The connection is established for a few seconds, but no data is transfered, and the connection is then closing automatically.
I left the modem plugged in and the Vodafone software set to Automatic, and after numerous attempts and 10 to 15 minutes, it appeared that the connection was finally established.
That is of course no way to work.
After running the VMB uninstaller, there are still a lot of stuff in library cache & preference folder that are pertaining to VMB and not removed.
It is also strange that after uninstalling and reinstalling the VMB software, I am not requested to enter my pin code to establish a connection.
It is obvious that there must be some other VMB files (probably corrupted) somewhere in the system that are not removed by the uninstaller.
I have another macbook pro running VMB without problem and I am really afraid to install Mavericks on this laptop because of this issue.
Thanks again for any feedback.
Jean-Philippe

Crystal Reports 2008 using Outlook/Exchange data source

Hi experts ! We are running a BOXI r3.1 FP 3 on dev and prod.
I recently built a report that uses the Outlook/Exchange data source, where a Sharepoint Calendar is shared to Outlook.
The report runs fine in CR 2008. I publish it to the Enterprise, and the report runs fine on-demand or VIEW. IF I schedule the report it fails with either
Object failed to run due to an error while processing on the Job Server.
or
Error in File ~tmp13bc6e93b8d9690.rpt: Unable to connect: incorrect log on parameters.
Is there some magic format for the user Id and password for exchange?
it seems like the job server is not handling the connection correctly.
Any ideas or comments would be appreciated.
Thanks
Zak

I'd love to know more how I can query my Outlook Exchange Server, specifically for the keywords "Good News" in the Subject line.
Any ideas?
I'm fairly new to Crystal Reports.

How do I allow users to backup iPhone EXCLUDING Exchange data (no CONTACTS, Mail, Calendar, Tasks, etc) for BOTH iCloud and iTunes?

We are EXTREMELY sensitive to corporate data and we wish to force compliance to our standards. We understand people need to back up THEIR data, but we are not willing to allow them to backup OUR data. We define OUR data to be any data that is entered into our Corporate Mail environment (Exchange 2007). Is there a way to allow for backups to either iCloud or iTunes that does not back up Exchange Contacts, Mail, Calendar, Tasks, etc. ?
We are using Mobile Iron which provides a way to disable BackUp via iPhone profiles being distributed, but we wish to allow people the ability to backup their content, again, just not ours. And we've seen some very similar threads.
We have noticed that the backups do not backup Mail and Calendar items, but it does backup Contacts. That's the sticking point.
Any help would be most appreciated. This is a major concern.

OK, sounded like a good suggestion, perhaps it only appeared the data was being backed up, but in reality the connection was being made and the contacts were some how syncing back w/ the cached credentials restablishing sync with the server. That would not have explained why messages and calendar items didn't resync; but I was willing to take it for a test spin. Wiped device, changed password in AD (so that it couldn't sync), began restore, and after restore with AD password changed prior to restore, the two test Exchange contacts were regrettably on my phone. Further test the reasonable theory of maybe credentials are being restored and the only contact data is being actually synced to get the data back on the phone, I added a third contact.
Now just to be belt and suspenders (to make sure something isn't happening at the restore where it get's the contact information at that exact window of time), I am wiping my again to see if the third contact (that's in my exchange contacts on the server) makes it to my device possibly during the sync, but I'm pretty sure what is happening is that he contact is making it "or being" some how categorized as "phone" data as opposed to Exchange data and being backed up there erroneously. For instance if you were to create a contact on an iPhone prior to establishing a sync relationship with the exchange server, it would take that contact and create that contact on your exchange server for you so that your "phone" data and your "exchange" data (as it relates to contacts at least) are in sync.
If you grant this assumption, then, when syncing Exchange data, the "phone" data is being created. When the back up takes place, I believe there is no distinction or bifurcation of these two data types. Phone data is backed up with no rhyme or reasoning related to its history or origin of creation (i.e. where it came from), it's not a contact from Exchange, it's just a contact. I believe Apple needs to tattoo Exchange contacts in some fashion or provide a "transparency" kind of paradigm or model used for calendars, where you can see two sources intermingled in a view, but they are truly not (you just see all).
Apple has indicated they understand the severity of this and are looking into it, but if anyone else has any insight or profiles not discussed on
http://help.apple.com/iosdeployment-ipcu/#app665501b0
Please sound off, and thank you imanog and bonesaw for your contributions.

Satellite A30: Software modem - no dial tone

I have reinstalled English XP on a machine purchases in SPain.
The modem has no connection as all - no dial tone can be heard.
I have installed the latest drivers, cables all OK. Telephone line works
The modem looks for COM3 but there are no COM ports in device manager.

Hi
I dont think that this issue has something to do with the com ports. The com port is a virtual port.
You should be sure that you have installed a modem driver for Spain form the Toshiba website driver.
Secondly please go to the modem properties, select the modem tab and disable the option wait for dial tone before dialing

Ipad - how to push Exchange calendar events to iCloud account? MobileIron is used to get Exchange data -- is there an app to push the ipad version of the events to iCloud?

ipad - how to push Exchange calendar events to iCloud account? MobileIron is used to get Exchange data -- is there an app to push the ipad version of the events to iCloud?
There are two separate calendars on ipad (ios 7.1) one for icloud, one fo exchange. I have tried a couple of calendar apps and while they do a good job of showing the events in the app - they don't push (synch) back to iCloud. Any thoughts on an app that will take my ipad calendars and synch them to a single icloud calendar/account?
Thanks

Hi
You asked about a recommendation for an app to paste a group of addresses into the To, Cc or Bcc fields of an email?
Our "MailShot Pro" app is the only one we know of on the App Store that creates special "group contacts" in your address book which contain all your groups email addresses, but can be used just like regular contacts from most of your favourite apps. We now have nearly 50000 people using it, and growing steadily every day.
Here is a link if you would like to know more “MailShot Pro” (itunes link).
A free version is also available if you'd like to try it out with a small nmber of contacts.
If you need any customer support just contact us at the website, we're always happy to help.
Peter
www.solubleapps.com
Disclosure: I am the developer of this app and may benefit from its sale- (but so might you)

How to Exchange Data and Events between LabVIEW Executables

I am having some trouble determining how to design multiple programs that can exchange data or events between each other when compiled into separate executables. I will layout the design scenario:
I have two VIs, one called Status and the other Graph. The Status VI displays the serial number and status of each DUT being tested (>50 devices). The Status VI has one timed loop along with a while loop that contains an event structure. If the user clicks on the DUT Status Cluster the event structure needs to pass the serial number to the Graph VI. The Graph VI when called fetches the records for the DUT based on the Serial Number and time frame. This VI is a producer/consumer so the user can change the time frame of the records to display onto the front panel graph.
I have a couple reasons the VIs need to be separated into independent applications. One being the underlying database fetches tends to slow the threads down between the two VIs; the other is that they may be distributed into separate systems (don't consider this in the design criteria).
I have been researching the available methods to pass the serial number to the Graph VI. My initial idea was to us a command line argument, but this does not allow the Status VI to pass another Serial Number to the Graph once it has started (I do not want to allow the user to execute multiple Graph applications because the database query can load down the server).
Is there a program method that I can implement between the two VIs that will allow me to compile them as two executables, and allow the Status program the repeatedly send an updated serial number event to the Graphs program.
I have reviewed many methods; Pipes (oglib_pipe), Action Engine, and Shared Variable. I am not sure which method will give me the ability to use a Event driven structure to inform the Graphs program when to update the serial number. Any suggestions and tutorials or examples would be greatly appreciated.

I have used the Action Engine (aka: functional global) approach for many years and it works well. Something to think about is that if you make the event's datatype a variant the only code that will need to know the actual structure of the event will be the function that needs to respond to it. Hence, a single event can service multiple functions.
Simply create a cluster containing an enum typedef that is a list of the functions that the event will service, and a variant that will be the function event data. From anywhere in the code you can fire the event (via the functional global) by selecting the function from the enum and converting function specific data to a variant. On the receiving end the event handler uses the enum to determine the function that is to get the data and sends the variant to it. The event handler doesn't know or care what the actual event data is so you could in theory add new functions without modifying the event handler.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

OWA 2007 Issue : Microsoft.Exchange.Data.Storage.VirusMessageDeletedException Could not get properties.

Hi I am facing an issue with Outlook web access on my production server Exchange Server 2007 with Sp1. When i try to reply or forward a message from OWA it displays The message has been deleted due to a virus threat . Kindly refer to the below error details. I have a box with all 3 roles installed I do not have an Edge Server . IO have installed Forefront on the same Box as my exchange Server.Below is the Detail of the error . Kindly Help
A virus was found in this message and it has been deleted. For further
information, please contact technical support for your organization.
Click here to continue working.
Copy error details to clipboard
Show details
Request
Url: https://192.168.7.12:443/owa/forms/basic/BasicEditMessage.aspx?ae=Item&t=IPM.Note&a=Reply&id=RgAAAACFMIZq8d7LTqcPs%2bRZA5g%2bBwBDDZWeCojSQZ1bZZ7Ga%2fkWAAAAeCc6AABDDZWeCojSQZ1bZZ7Ga%2fkWAA5iTbjpAAAJ
User host address: 192.168.7.11
User: Munendra Pal Gangwar
EX Address: /o=First Organization/ou=Exchange Administrative Group
(FYDIBOHF23SPDLT)/cn=Recipients/cn=mp_gangwar
SMTP Address: [email protected]
OWA version: 8.1.336.0
Mailbox server: PFCDELEXCH01.PFCDOMAIN
Exception
Exception type: Microsoft.Exchange.Data.Storage.VirusMessageDeletedException
Exception message: Could not get properties.
Call stack
Microsoft.Exchange.Data.Storage.MapiPropertyBag.GetProperties(IList`1
propertyDefinitions)
Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag.InternalLoad(PropertyDefinition[]
properties, Boolean forceReload)
Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag..ctor(StoreSession
session, MapiProp mapiProp, Origin origin, PropertyDefinition[]
autoloadProperties, Boolean canSaveOrDisposeMapiProp)
Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag..ctor(StoreSession
session, MapiProp mapiProp, Origin origin, PropertyDefinition[]
autoloadProperties)
Microsoft.Exchange.Data.Storage.Item.InternalBindItem(StoreSession
session, StoreObjectId itemId, Byte[] changeKey, ItemBindOption
itemBindOption, PropertyDefinition[] allPropsToLoad)
Microsoft.Exchange.Data.Storage.Item.InternalBind[T](StoreSession
session, StoreId id, ItemBindOption itemBindOption,
PropertyDefinition[] allPropsToLoad)
Microsoft.Exchange.Data.Storage.Item.InternalBind[T](StoreSession
session, StoreId id, PropertyDefinition[] allPropsToLoad)
Microsoft.Exchange.Clients.Owa.Core.Utilities.GetItem[T](StoreSession
storeSession, StoreId storeId, Boolean forceAsMessageItem,
PropertyDefinition[] prefetchProperties)
Microsoft.Exchange.Clients.Owa.Core.Utilities.GetItem[T](UserContext
userContext, StoreId storeId, Boolean forceAsMessageItem,
PropertyDefinition[] prefetchProperties)
Microsoft.Exchange.Clients.Owa.Core.Utilities.GetItem[T](UserContext
userContext, StoreId storeId, PropertyDefinition[] prefetchProperties)
Microsoft.Exchange.Clients.Owa.Basic.EditMessage.LoadMessage()
Microsoft.Exchange.Clients.Owa.Basic.EditMessage.OnLoad(EventArgs e)
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Inner Exception
Exception type: Microsoft.Mapi.MapiExceptionVirusMessageDeleted
Exception message: MapiExceptionVirusMessageDeleted: Unable to get
properties on object. (hr=0x80004005, ec=1294) Diagnostic context:
Lid: 18969 EcDoRpcExt2 called [length=479] Lid: 27161 EcDoRpcExt2
returned [ec=0x0][length=422][latency=15] Lid: 23226 --- ROP Parse
Start --- Lid: 27962 ROP: ropOpenMessage [3] Lid: 17082 ROP Error:
0x50E Lid: 26977 Lid: 21921 StoreEc: 0x50E Lid: 27962 ROP:
ropExtendedError [250] Lid: 1494 ---- Remote Context Beg ---- Lid:
1238 Remote Context Overflow Lid: 14164 StoreEc: 0xFFFFFA1D PropTag:
0x672D0003 Lid: 8660 StoreEc: 0x8004010F PropTag: 0x672D0003 Lid:
21970 StoreEc: 0x8004010F PropTag: 0x672D0003 Lid: 23921 StoreEc:
0x3EC Lid: 21970 StoreEc: 0x8004010F PropTag: 0x672F0014 Lid: 23921
StoreEc: 0x3EC Lid: 21970 StoreEc: 0x8004010F PropTag: 0x6708000B Lid:
21970 StoreEc: 0x8004010F PropTag: 0xE960102 Lid: 21970 StoreEc:
0x8004010F PropTag: 0x6708000B Lid: 21970 StoreEc: 0x8004010F PropTag:
0xE960102 Lid: 21970 StoreEc: 0x8004010F PropTag: 0x67760102 Lid:
25394 Lid: 19506 Lid: 27698 Lid: 11285 StoreEc: 0x50E Lid: 21970
StoreEc: 0xFFFFFC07 PropTag: 0x30080040 Lid: 25818 Lid: 6153 StoreEc:
0x50E Lid: 25906 Lid: 5249 StoreEc: 0x50E Lid: 1750 ---- Remote
Context End ---- Lid: 27962 ROP: ropGetPropsSpecific [7] Lid: 17082
ROP Error: 0x4B9 Lid: 26465 Lid: 21921 StoreEc: 0x4B9 Lid: 27962 ROP:
ropExtendedError [250] Lid: 1494 ---- Remote Context Beg ---- Lid:
26426 ROP: ropGetPropsSpecific [7] Lid: 1750 ---- Remote Context End
---- Lid: 26849 Lid: 21817 ROP Failure: 0x4B9 Lid: 20385 Lid: 28577
StoreEc: 0x50E Lid: 32001 Lid: 29953 StoreEc: 0x50E
Call stack
Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32
hresult, Object objLastErrorInfo)
Microsoft.Mapi.MapiProp.GetProps(PropTag[] propTagsRequested)
Microsoft.Exchange.Data.Storage.MapiPropertyBag.GetProperties(IList`1
propertyDefinitions)

I had this same issue, except I have Symantec mail security not Forefront. It wound up being a line in the adult content filter. For whatever reason, they included "If you received this email" as one of the literal strings. This is probably part
of almost every corporate confidentiality clause I have ever seen!! go figure......
Thanks for the event log hint- since I have the adult content set to delete, I had no good tracking mechanism in Exhange or SMSME. I set email notifications for the future on these.
Brent
I had this same problem, but I have ESET Mail Security Server. in some one case the problem y solved if I attach the "user@domain" in the "white
List". But in many case the problem is continuous. I have Exchange 2007 in MS Windows Server 2003.
Thanks for yours help.

PowerView error -Cannot create a connection to data source 'TemporaryDataSource'.

Hello and thanks for the time.
I am getting the following error when trying to create a powerview report. I don't get where is this TemporaryDataSource is and how do I check the permissions on it? that is what this error is pointing to, no? I tried re-installing the
SQL reporting add-in and no go there. SQL Browser services are running. I can see the file in Excel just can't create a powerview report. any and all help is appreciated. thanks.
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'https://teamsite.domain.com/POWERPIVOT/PowerPivot%20Gallery/Test.xlsx'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink
xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'https://teamsite.domain.com/POWERPIVOT/PowerPivot%20Gallery/Test.xlsx'. Verify that the connection information is
correct and that you have permissions to access the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'TemporaryDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error
navigate to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>

Hi,
Issue not supported in sharepoint on-premise team.
In addition, as this issue is related to Powerview, I suggest you create a new thread on for Powerview forum, more experts will assist you.
https://social.technet.microsoft.com/Forums/en-US/home?forum=powerview
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Running "Flex test drive" - Got error while attempting to connect to data service

Hi,
I'm a Flex / Flash builder beginner. I downloaded the 60 days evaluation, and started to run the "Flex test drive" :
http://www.adobe.com/devnet/flex/testdrive.html
My configuration :
XP SP3 PRO french edition
Tomcat 6.0
My local Eclipse :eclipse-jee-helios-SR2-win32 (but also got the issue on the Flash Builder Eclipse, which version is 3.4.0 (Generation ID M20090211-1700)
Flash Builder 4 with Eclipse plug-in
All on same PC
The Test Drive proposes examples in three technologies : Cold Fusion, PHP and Java. I'm doing the Java examples.
Installation of Flash Builder, as well as step 1 of the Test Drive (Build the user interface) went fine. I could run the project, which at the end of step 1 correctly displayed the UI in my browser.
Only one problem, I don't know if it is relevant for the rest of this post : I first got an error, saying that ports 8080, 8005 and 8009, requested by Tomcat, where used. After a short Google search, I fixed it by changing these ports to 8081, 8006, and 8010, in the Tomcat 6.0\conf\server.xml file.
The Test drive second step is "Connect to data". I found some discrepancies between the Test Drive doc, and what is displayed in Flash Builder. The Test Drive says :
"Use the Data menu and the Service Wizard to create a service for your application server. For ColdFusion and Java, specify the service file you put on your application server earlier (see Figure 9 for a PHP example). For Java, select the No password required check box, select the employeeService destination, and change the service package to services.employeeservice."
--> But there is no "No password required check box".
Also, when running the "Connect to data/service..." wizard, it was not at first completely clear what to choose. The proposed choices were :
BlazeDS
ColdFusion
HTTP
LCDS
PHP
Web Service
XML
Since all others choices, when tried, declared to be unconsistent with my project's server type, I finally selected "Web Service".
In the next wizard's form, according to the Test Drive indications, I specified the URI of my EmployeeService class : C:\Program Files\Apache Software Foundation\Tomcat 6.0\webapps\testdrive\WEB-INF\classes\services\EmployeeService.class
That defined correctly the other fields.
But when pressing the "Next >" button, Flash Builder issued the following error message :
English translation : Unable to extract operations and entities from specified WSDL. Reason : an error occured while instrospecting the service.
And the full error text is :
An error occured while instrospecting the service. WSDLException: faultCode=PARSER_ERROR: Problem parsing 'file:/C:/Program%20Files/Apache%20Software%20Foundation/Tomcat%206.0/webapps/testdrive/W EB-INF/classes/services/EmployeeService.class'.: com.sun.org.apache.xerces.internal.impl.io.MalformedByteSequenceException: Invalid byte 2 of 2-byte UTF-8 sequence.
It is usually relatively easy to find fixes through Google searches, but this time, it didn't work. So here I am, expecting a bunch of wise answers from all the nice Flex / FB gurus that I'm sure haunt this forum .
Thanks and best regards.
Marc.

For those who would have the same problem, here is how I could eventually fix it.
Since the Flex Test Drive is sometimes out of sync with flash builder 4, I recreated a project using other help pages on Adobe site :
Entry point :
http://help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08- 7ffd.html
As suggested, I used the New Project wizard to create a new project, with :
Application server type : J2EE
Check the radio button "Use remote object access service : BlazeDS"
Then, as indicated in following pages (section "Accessing BlazeDS")... :
file:///C:/Mes%20documents%20C/Commun/Developpement/Documentation/HT-Tracks/AccessingData/ help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08-7ffe.ht ml#WSbde04e3d3e6474c4-19a3f0e0122be55e1b7-8000
...I selected the "Data / Connect to Data/Services..." menu option, which started the Data/service connection wizard.
There, I selected a BlazeDS (and not Web Services) service type, and everything went fine.
Suggestion to adobe staff : maybe it would be useful to update the Flex Test Drive to reflect Flash Builder 4 ?
Very nice product anyway, so far, congratulations...
Rgds
Marc.

11 pm modem mysteriously dialing, connecting, exchanging data

Similar Messages

Maybe you are looking for