1102W printer won't stop printing

My 1102w wireless printer works fine from the host PC (HP Pavillion) using Win Vista64.
I have an Acer notebook (Win7 Home Premuim with all updates) which has the latest HP software for the 1102w installed. When I select a text file to print from the notebook, it prints just fine but will not stop. For example, when
printing a one-page document the one page will continuously print until I shut down the printer
and cancel the print job. With the Print Status display shown, the document queued for printing will
never go away. It's as if the software is never recognizing the End of File character.
I did do a search on this forum for something similar to this problem but didn't see any posts that applied. Thanks
for any help.

Disable the "Enable bidirectional support" in the P1102w Properties > Ports.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Similar Messages

HP Laserjet 1022nw running with Win7 64 computer printing multiple copies - won't stop

HP Laserjet 1022nw running with Win7 64 computer printing multiple copies - won't stop until you shut off. It resumes printing when you turn the 1022nw back on
Have renistalled Driver
It worked fine with Vista and XP

Hello @Astronav,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the issue of multiple pages continuously printing from your Windows 7 computer to your HP LaserJet 1022nw Printer. However, in order for me to provide you with accurate support I do need to know how your printer is connected to your Windows 7 computer.
Normally the continuous printing issues are caused by your router. When you send the print command to your printer from your computer than the print command goes from your computer to your router and finally to the printer. If there is a conflict with your router it may constantly send the signal to the printer to 'print' a job. Or, if the printed text is garbled information and weird symbols that your printer is printing it could be commands from the router to your computer that are improperly being sent to your printer and resulting in a page of weird symbols printing.
Therefore, it is very important for me to know how your printer is connected to your computer as that will guide us in the what direction we need to be troubleshooting.
Once I find out how your printer is connected to your computer I will be able to provide you with step-by-step instructions on how to resolve this continuous print issue. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Awesome Airplanes - won't stop printing!

I installed the Awesome Airplanes App on my HP OfficeJet 8600 and it has printed an airplane every day. I thought it was the children printing them but it is the app. I have removed the app but it still prints at least one a day.
How can I stop it?
Thanks
This question was solved.
View Solution.

Hi,
Removing an app won't stop its subscription.
Please follow the steps listed under Managing Scheduled Delivery Print Apps within the suspend or cancel sections to stop the scheduled delivery:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02940901&cc=us&dlc=en&lc=en&product=4323659&tmp...
As you already removed the app be sure to add it back, then follow the steps prior removing it.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Test page won't stop printing

I have a Hp psc 1315 all-in-one and it won't stop printing a test page everytime I turn it on. I have had this printer for 5 years and it did this once before but I can't remember how I fixed it. I followed the directions over and over and scanned the document after it printed and it still won't stop. I'm getting sick of wasting ink and paper, any suggestions??

It's the alignment page that keeps printing. Check the link below. You need to scan the alignment page successfully so that it won't keep on printing it everytime you restart printer.
Cause
The product aligns the print cartridges every time at cartridge installation or replacement to ensure the highest-quality prints. The alignment page continues to print when the product is turned on or off, or when a print job is started, for any of the reasons below.
The alignment process is not complete.
The ink cartridges are not properly installed.
The ink cartridges need to be replaced.
The product needs to be serviced
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01577355&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...

Printer won't stop printing.

Asked for six copies of a one page document and won't stop even after pressing cancel printing.
HP Officejet 6500
Windows 7
This question was solved.
View Solution.

Power off the pc and the printer, then load them both back up. This should hopefully clear it from memory if it is getting stuck somewhere.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

HP 6310 allinone won't stop printing deleted job

Wireless network HP 6310 all in one printer,
Our operating system is Windows 7.
My husband sent a print job to the printer from the internet. It printed multiple times and would not stop. I tried the following to get it to stop printing:
deleted the job from the queue
cancelled the job at the printer
turned the printer off and on
unplugged the printer
reinstalled a new version of the printer
It still won't stop printing.
Please help!

Hi @dionysusthewino ,
I see that the printer is printing out blank pages and won't stop. I would be happy to help you.
Clear out the print queue on the computer.
Then power cycle the printer.
Restore the printer back to factory settings, if you are still having issues. If the printer is networked though, you will have to set it up again.
Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
If you need further assistance, please provide the results and the following information.
What operating system are you using?
How to Find the Windows Edition and Version on Your Computer.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How is the printer connected? (USB/Wireless)
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP 7520 won't stop printing

Hi,
I have an HP 7520 with two issues occurring at once: it won't stop printing and it won't connect to web services. This is a recent problem.
I've read through the various self-help posts, but I can't get the printer to stop printing (or the message screen to stay in menu mode) long enough to select the tools menu.
All the pages keep printing with only one line, which reads "CONNECT xmpp008.hpeprint.com:80 HTTP/1.0".
Any assistance would be greatly appreciated.
KMK

Hello @klauskokott ,
Welcome to the HP forums.
I understand that your printer can't connect to the Web Services.
I would like to help.
It sounds like the printer is making a partial contention to the servers.
Just enough of a connection to cause it to try and print the web services information page, but not enough to actually print the page and confirm the connection. This would be why is keeps trying to print the web services page, but you instead get the weird 'CONNECT xmpp008.hpeprint.com:80 HTTP/1.0'.
I would first try resetting the network.
Simply turn your printer and other network devices off.
Unplug the power to the router for at least one minute.
Plug the power back into the router and turn on your network devices.
If that does not resolve the issue, try setting a manual DNS.
The following reply by happytohelp01 has instructions for setting the manual DNS.
It is for a 7510, but the process will be very similar.
Efax 7510 still won't work after turning off/on ePrint several times
Pleas let me know how things work out, or let me know if you need any further help.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Laserjet 6P won't stop printing - prints a line of junk on each page -not connected to network or PC

My HP Laserjet 6P won't stop printing. It prints a few lines of symbols and characters at the top of each page. The printer is not connected to a network or computer. I tried shutting the printer off for a long time. This started when I tried printing from a MAC to the printer, but now there is nothing connected to the printer.
Any suggestions for resetting, etc.? I don't know how to reset this printer so I haven't tried anything with the various buttons, etc.

Disable the "Enable bidirectional support" in the P1102w Properties > Ports.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

HP Laserjet P1102w won't stop printing

I've just installed an HP Laserjet P1102w from the disk and it won't stop printing. I've disabled the bidirectional support and gotten rid of all other HP devices on my laptop but it still keeps going - just printing blank page after blank page. How can I stop this?

Hi @dionysusthewino ,
I see that the printer is printing out blank pages and won't stop. I would be happy to help you.
Clear out the print queue on the computer.
Then power cycle the printer.
Restore the printer back to factory settings, if you are still having issues. If the printer is networked though, you will have to set it up again.
Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
If you need further assistance, please provide the results and the following information.
What operating system are you using?
How to Find the Windows Edition and Version on Your Computer.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How is the printer connected? (USB/Wireless)
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet 1102w printer settings on WRT54G2-V1 lost after power is turned off

I have installed the HP drivers for my HP LaserJet 1102w printer on my Windows 7 (64 bit) Professeional and Windows XP laptops.They both print fine over the network using the WRT54G2-V1 router immediately after installing the drivers. However after shutting down either the computers or printer the settings are lost and the printer willl not work unless the drivers are reloaded.
In talking with HP support they are telling me this printer is not compatible with the router, which I find hard to believe given most backward compatibility built into printers today and the fact it initially works before it is shut off. Can anyone offer some suggestions on how to configure my router to support the printer or verify if the information I received from HP support is valid.
Thanks!

The trick is to set the printer's IP Address manually so has a static IP address. See the user manual for the printer (I think this may be the user manual for the OP's printer). If so see page 28 for how to set the IP Address to manual on the printer.
IP address
The product IP address can be set manually, or it can be configured automatically using DHCP, BootP,
or AutoIP.
To change the IP address manually, use the HP Embedded Web Server.
1. Open the HP Embedded Web Server, and then click the Networking tab.
2. In the navigation pane, click the IPv4 Configuration link or the IPv6 Configuration link.
3. In the IP Address Configuration section, click the Manual IP option.
4. Type the required data in the Manual IP Address box, the IP Subnet Mask box, and the Manual
Deault Gateway box.
5. Click the Apply button.
You will need to set the IP address for the printer outside of the range the router's DHCP server has reserved and hands out to clients. For example if the router is configured to use it's default IP address of 192.168.1.100 with 50 client addresses reserved, try setting the printer to 192.168.1.200 and the subnet mask to 255.255.255.0. If the printer drivers were previously installed and configured they will either need to be removed and reninstalled so they use the new printer IP address, or reconfigured so they point to the new IP address of the printer.

Text won't stop deleting, delete key appears to get "stuck"

Sorry if this is in the wrong topic, I have never used the support forums for any of the multitude of problems I have had with my Mac, but this one is severe and odd enough that I couldn't even find anyone else discussing it (although I'm sure someone is, but I tried many search key combinations on Google and only found unrelated things), so I decided to at least get it documented.
I have had an issue that has happened at least 3 times I can remember (I am fairly certain it has happened more, closer to 7-8, those are just the times I am 100% confident about), although very spaced apart and infrequent, where my delete/backspace key seems to get "stuck". However, at least one time I can verify that I never even hit the key. Whatever text I currently have open immediately starts deleting at lightspeed, and I can do nothing to stop it. None of the other keys on my keyboard work, and though my mouse works, if I click somewhere else, it starts deleting the text there. When I force it to go to another window where there isn't an open text box, I get the general Mac error sound, and it repeats non-stop, and faster than I've ever heard it. I have to do a hard shut-down, although once it led to a kernal panic. When I have stopped whatever is happening before it panics though, when I restart, I don't receive any kind of error message, nor the message about OS X not having been shut down properly.
Every single time it has happened when I was typing something that couldn't be saved, like a message on a forum, a private message on a site or an IM chat window. Sometimes I lost a half hour's worth of work or more.
The first time it happened, I honestly thought someone had managed to hack into my computer, but another time I was using a physical modem and Airport was turned off, and when I ripped out the cord, it didn't stop.
I have a MacBook Pro from 2007, running the most recent version of Tiger. I haven't had the money to upgrade. All security updates are up-to-date, with one exception: I have not upgraded to the most recent version of iTunes.
Honestly, I currently am having and have been having a bunch of other severe issues with my Mac, so troubleshooting will be quite difficult as it's not at all impossible it's a result of one of my other problems. I also currently am dealing with some health problems that make me unable to try to find the root of the problem, specifically I have a problem with my hand and wrist that makes typing very difficult.
If someone does recognize this issue and already knows why it might be happening, I'd appreciate the help. I'd also appreciate anyone letting me know how I can prevent it OR what to do when it begins and how to stop it. But I probably will be unable to go through a typical troubleshooting rundown.
As I said, I just wanted this documented, and I also would like to know if anyone else has had this problem. I have never experienced an issue like this with any of my past computers, including Macs and PCs. I do know however that the key is NOT physically getting stuck - as in getting lodged down and continuing to be pressed. There is at least 1 time I can verify I never even hit the key (I wasn't typing anything at the time). I am fairly sure the problem is entirely unrelated to the actual delete key itself.
I'll describe the symptoms one more time:
At a random time, with no discernible warning, text contained in whatever text box I have open begins deleting itself. Several paragraphs disappear in a matter of seconds.
Pressing escape or any other key on the keyboard does nothing. If I click to another area in the text, it will immediately begin deleting wherever I have placed the cursor. If I go to another window with text that can be edited, it begins deleting there. It does not delete in more than one place simultaneously.
If I bring another window without any kind of "deletable" text to the front, one of the general Mac error sounds (I'm not sure which one it is) starts happening and repeats without stopping at a rate that could induce a seizure. To stop it all, the only thing I have found can be done is a hard shut-down. Another time it continued to end in a kernal panic. I wish I had the details of the error, but it was so long ago and I have no idea which panic is the right one in the logs.
I have no way of knowing what programs were running at the time, as obviously that's not something I'm able to pay attention to when it happens, and it has happened so randomly and infrequently it's nothing I've been able to document. Since I have to restart to make it stop, I've then lost that info and I have no time to try to write it down or something beforehand.
I have not had any similar issues that I know of (for instance, for the "g" key keeps repeating and won't stop typing "g's") and I've never experienced this on any past computer.
Thanks for anyone who can help!
If you aren't able to offer advice but have had this issue yourself, PLEASE let me know. I can't seem to find anyone who has experienced this particular problem.

"Cleaning the keyboard is the first step in troubleshooting sticky/stuck keys."
Okay, I guess I misunderstood, although I am still confused. You're saying that since the other user did an extensive clean of their keyboard and this did not solve the problem, it is "most likely" a hardware problem, correct? Wouldn't a thorough cleaning without any results show that it's probably not physically related to the keyboard?
"The "delete" key may be defective or the cover you are using somehow is making the key stick. If you have ruled out the latter and everything else, your only other alternative is to take the MBP to your local Apple Store or AASP. The staff will check out your keyboard (free) to confirm if you are having a hardware problem. If you have AppleCare or ProCare, the repairs will be free. If not.................."
Well, I had just said in my most recent post that it has now happened with other keys, and in my initial post that it happened at times when my hands were nowhere near the keyboard. It is not a defective delete key and the cover is not making the keys stick - it doesn't adhere to them and does not have any sticky substance on it of any kind. I am an experienced computer user, and I know my computer very well. While I am not a psychic that can always know what is causing a problem, I am able to discern with much accuracy what is NOT causing it.
Also, I have significant health issues so getting to an Apple store would be a huge challenge for me. And although I have AppleCare any repairs won't be free. Due to some small physical damage my laptop obtained a few years ago, I have been completely refused almost all service that I paid over $300 for, even though the damage is completely superficial. After fighting this, I was told they WOULD repair my computer, however, they would also repair the physical damage despite my insisting NOT to; I had no choice in the matter and the cost would be a minimum of $1,500 (I also would not be informed the exact price until after and my credit card would be charged without my knowledge - I had to give them my credit card number and sign away their right to make any charges and when I requested being contacted before they charged me for the repairs I didn't want done, I was told they did not do that). My family is struggling to pay for my $5 medications.
When my logic board died (that same issue that affected thousands of computer users), I had to print out Apple's report from their site, which stated that they would replace and repair them free of charge to ANY Mac owner with a computer that met certain qualifications (which mine did). When it happened, completely out of nowhere, I knew immediately that was the problem, yet still had to go through the insulting and idiotic "Is your computer plugged in?" list of things and a customer WITH AppleCare was being refused a service they'd offered to people WITHOUT AppleCare, for a known manufacturing defect that has occurred widely in nearly every brand of computer made.

ITunes won't stop launching

I don't know if this happens every time that Apple has a release but it seems like once they have pushed an update my iTunes goes crazy. It won't stop auto launching at will. It's doing this on all profiles and I do not have this in my auto launch application list. I also already tried to run a permission repair and this did nothing as well. The launchd is the parent service and I thought by force killing it, it might fix the problem. Needless to say that killed my session lol. I checked the permissions on the application and my files and the permissions appeared ok. Any suggestions would be helpful.
P.S. I have deleted the app before and reinstalling it but that doesn't help.

I believe I found the answer from another post. The post mentioned a Bluetooth connection problem. I looked at my Bluetooth item list and noticed that my discoverable option was on and I turned it off. I also noticed that my Bluetooth connected printer was also unavailable and think that this was the root cause.

Brand new x64 using ethernet won't stop spooling

Brand new 5740 using ethernet won't stop spooling. I can copy but I can't printing from HP Envy. It looks like the message is not reaching the printer.

Hi @gleongelpi
Let's first run the Print and Scan Doctor. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
Connectivity :
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test : Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check : Checks for missing or corrupt driver files.
Device Manager : Checks for problems in Device Manager that would prevent printing.
Device Online : Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue : Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match : Checks the port settings for the HP product.
Device Conflicts : Checks for conflicts with other drivers, such as other printer brands.
Ink Issues : Checks the cartridges and ink levels for issues that affect print quality.
Print Settings : Checks and adjusts the print quality settings.
Test Print : Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests : Checks the scan mechanism, drivers, and registry entries.
You can also click the Printer menu to find the additional features such as cleaning printheads, aligning printheads, checking ink levels, and viewing advanced printer data for your selected printer.
Source: Try the HP Print and Scan Doctor for Windows
Click here to download and run the Print and Scan Doctor> www.hp.com/go/tools
If the issue perists, hold down the Windows Logo key () on the keyboard and the 'R' to open the run box
Type services.msc and press Enter
Locate Print Spooler and double click on it to open the Spooler properties
Make sure startup type is set to Automatic, if it is not please click on the drop down and choose Automatic
Under Service status, please Stop the server, and then wait a moment and click Start
Please let me know if the issue is resolved and the outcome of the Print and Scan Doctor if you require further assistance. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Calendar alert post-Mavericks installation won't stop chiming

Installed Mavericks yesterday over Snow Leopard (10.6.8) and have had a host of problems that have paralysed my computer use. As someone who's not particularly tech-savvy and relies on their Mac for their living, this has been a nightmare. The most irritating problem has been that I use the glass chime for my calendar alert. Well, it won't stop ringing--it's like a button's depressed and stuck in that position. Can anyone help? It renders the audio unusable now, which means no VOIP calling or audio of any kind as I'm forced to keep it on mute. And I can't find anything on the Internet that indicates anyone else has had the same problem. Can anyone help? (And no idea if this is connected but my mouse is fluttering all over the place, which is yet another annoyance, leaving me wondering why I was so stupid as to upgrade.)
Thanks!!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

My iPhone 5 won't stop scrolling through songs and I can't stop it please help !! :(

My iPhone 5 won't stop scrolling through songs and I can't stop it please help !! :(

settings - general - usuage - music - delete. Then do a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
Then sync the music back via iTunes.

Animated Gif won't stop looping!

I'll try to format my question as best I can.
I have created a Java chat applet, and for the Java chat, I have created a "ChatPane" class for displaying the chat. ChatPane is an extension of Canvas, and every time the paint() method is called, the program loops through visible lines of text drawing them on a buffer image, then draws the buffer on the screen.
My problem lies in animated gifs. In my chatroom, chatters can type textual symbols that will be replaced with an image (or emoticon). I have created my animated icons in a popular animated gif editing program, and I have set particular icons to loop 3 times. The problem is that when the animated icon is displayed in my applet, the animation -doesn't stop- after 3 loops, it loops forever! I can't for the life of me figure out why! Can anyone provide any insight as to why the animations won't stop after 3 loops? The animations work just fine if displayed in a browser by themselves (they stop looping after 3 times)
Thank you for any help!
[email protected]
Tony N.

From what I understand of your problem;
- You have made your own animated gifs
- With the software to make these gifs you have set them to loop their animations 3 times
- They loop continuously
I don't see how java can be expected to interpret the animated gif software instructions to loop only 3 times and would assume that there are various proprietry ways of setting this (an assumption based on applets /javascript etc, that rely on the client-side browser interpreter). So, if you loop your animated gif or have any form of animated gif that you import into your program with getDocumentBase /getCodeBase as a (pre-animated) gif, then this is exactly what I would assume would happen.
The answer is to seperate your images with eg;-
smiley1[0];
smiley1[1];
smiley1[2];
run a seperate thread, cycle through them as you wish and stop.
I'm fairly sure that there is nothing in either the swing libraries or the jmf libraries that can resolve this any other way, so your choices are write extra code and have a pool of threads to control this, or leave it as is.

1102W printer won't stop printing

Similar Messages

Maybe you are looking for