1102w wireless not working - but light is solid blue

Hello,
I am hoping someone can help me.
I have been using the HP 1102w via usb since I got it a few month ago. It has been the perfect little printer. It would be much more convenient if it would print wirelessly so I viewed the HP video on youtube and set it up. My blinking blue light turned solid, I saw the bonjour, I deleted the old printer yada yada....
I went to another room to start printing and they are all sitting in my print cue, saying sent. I checked my printer and it is on...I have no idea what could be going wrong, everything appears to be done correctly but the printer just won't print...
HELP!

Also, when I go to the webpage for the printer it says
Device Status 10.000 supply memory error.
A few quick google searches tells me this has something to do with the toner cartridge, however, I just tried printing via the USB and it was perfectly fine.

Similar Messages

  • HP Laserjet Pro 1102w Wireless (Not working on MacBook Air 10.10)

    HP Laserjet Pro 1102w Wireless is not working on my MacBook Air Yosemite (v10.10).
    I tried setting it up via this link: (v10.10 Yosemite, Method 3: Wireless Setup Using a USB Connection)
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02847467#N2251
    All I get under printers is the USB kind and NOT the Wireless/Bonjour kind.
    Can anyone help me out?
    Thanks.  

    Hi @Random_Pelican ,
    I see that you are having issues setting up the printer on 10.10. I would like to help you out today.
    If the printer has a valid IPv4 address and you still can't add the printer as a Bonjour printer, most likely Multicasting is turned off on the router, since your not able to add the printer as a bonjour device and the other devices won't recognize the printer. Just call the router company and have them turn it on.
    If the printer doesn't have a valid IPv4 address please try these steps:
    Reset the printer first to clear out any previous network settings.
    Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
    Print out a configuration report and make sure the SSID and IP address are cleared.
    Printing a Configuration Page.
    Make sure Safari is set as the default browser. Sometime the Embedded Web Server won't open if it isn't.
    Open Safari, across the top select the Safari menu, select Preferences, General, set as default.
    I will provide the steps for 10.9, which should work the same for 10.10.
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Here is a Youtube video of the Laserjet P1102w wireless installation on Maverick.
    Laserjet P1102w.
    You may follow the steps instead of watching the video.
    You have to connect the USB cable from the printer to the computer to install the printer as a USB device first and then configure the wireless network.
    Turn the printer on, connect the USB cable and install the Apple Update that should automatically load.
    Then go to the Apple, System Preferences, Printers and Scanners.
    Highlight the Laserjet on the left side of the window.
    Then click on Open Print Queue, click on Settings, click on Utility, click on Open Printer Utility, then click on the HTML Config button.
    The Embedded Web Server for the printer will open.
    Click on the Networking tab, select Wireless on the left side.
    Fill out this information for your network. Status make sure you select Enabled.
    Apply the settings.
    Then go back to Apple, System Preferences, Printers and Scanners and click the + sign to add the Laserjet bonjour printer. (might take a couple of minutes to appear) Make sure the printer listed beside use: shows the proper printer name and not the default driver, then click on the add button.
    Delete the USB printer from the list from the Printers and Scanners window.
    Disconnect the USB cable.
    Test the printer.
    Let me know how you make out.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • I am using chat-r wireless and facetime is not working but when i put rogers fido or any other carrier sim in it work. Anyone know what the problem?

    I am using chat-r wireless and facetime is not working but when i put rogers fido or any other carrier sim in it work. Anyone know what the problem?

    I'm guessing it's a compatibility problem similar to that that T-Mobile in the US has. I'm not familiar with chat-r wireless, but I'm guessing it's not a supported carrier for the iPhone. If they can't tell you how to fix it, I'm guessing it's just plain not going to work.

  • Airport time capsule 2 TB. All is connected and Wi-Fi is working but light still flashes amber rather than solid green. I have tried to reset but this still happens. Is there a way to fix this or do I need to?

    Airport time capsule 2 TB. All is connected and Wi-Fi is working but light still flashes amber rather than solid green. I have tried to reset but this still happens. Is there a way to fix this or do I need to?

    You want to see a green light on the Time Capsule.
    Once you have set up the Time Capsule initially, a flashing amber light indicates that the Time Capsule has a message for you....possibly about a network condition or notice of an update that is available.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the amber dot and another window will appear to provide the current status....along with suggested actions to remedy the flashing amber light.

  • Intel 6205 wireless not working with Lenovo W520

    Loving the new W520... very fast, if only the wireless would work. Unable to get wireless interface functioning, won't even show up in ifconfig. I've appended requested wireless information, thanks in advance for any assistance.
    1) Machine Brand and Model (PC/Laptop):
    Lenovo W520
    Intel Centrino Advanced-N 6205
    Note: Wireless switch on lefthand side enabled, bluetooth led lights up but wireless does not.
    2) Wireless Brand, Model and Wireless Chipset:
    $ lspci -nn
    03:00.0 Network controller [0280]: Intel Corporation 6000 Series Gen2 [8086:0085] (rev 34)
    3 ) check interface:
    ifconfig does not show wireless
    $ iwconfig
    lo no wireless extensions.
    eth0 no wireless extensions.
    4 ) Check for modules:
    $ lsmod
    iwlagn 215351 0
    iwlcore 139688 1 iwlagn
    mac80211 269644 2 iwlagn,iwlcore
    cfg80211 167809 3 iwlagn,iwlcore,mac80211
    5) Kernel boot messages
    $ dmesg
    [ 13.497936] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
    [ 13.497938] iwlagn: Copyright(c) 2003-2010 Intel Corporation
    [ 13.498058] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 13.498089] iwlagn 0000:03:00.0: setting latency timer to 64
    [ 13.498181] iwlagn 0000:03:00.0: Detected 6000 Series 2x2 AGN Gen2a, REV=0xB0
    [ 13.499187] lp: driver loaded but no devices found
    [ 13.502642] alloc irq_desc for 22 on node -1
    [ 13.502645] alloc kstat_irqs on node -1
    6 ) Network configuration
    $ sudo lshw -C network
    *-network UNCLAIMED
    description: Network controller
    product: 6000 Series Gen2
    vendor: Intel Corporation
    physical id: 0
    bus info: pci@0000:03:00.0
    version: 34
    width: 64 bits
    clock: 33MHz
    capabilities: pm msi pciexpress cap_list
    configuration: latency=0
    resources: memory:d5300000-d5301fff
    7 ) Scan for networks:
    not relevant as no wireless interface appears
    8 ) Ubuntu Version:
    Ubuntu 10.10
    9 ) Kernel/architecture (including 32 vs. 64 bit):
    2.6.35-28-generic x86_64
    10 ) Restarting the network:
    sudo /etc/init.d/networking restart
    * Reconfiguring network interfaces... Ignoring unknown interface eth0=eth0.
    [ OK ]
    Additionally, modinfo shows the following:
    $ modinfo iwlagn
    filename: /lib/modules/2.6.35-28-generic/updates/compat-wireless-2.6.36/iwlagn.ko
    alias: iwl4965
    license: GPL
    author: Copyright(c) 2003-2010 Intel Corporation <[email protected]>
    version: in-tree:
    description: Intel(R) Wireless WiFi Link AGN driver for Linux
    firmware: iwlwifi-4965-2.ucode
    firmware: iwlwifi-5150-2.ucode
    firmware: iwlwifi-5000-2.ucode
    firmware: iwlwifi-6000g2b-4.ucode
    firmware: iwlwifi-6000g2a-4.ucode
    firmware: iwlwifi-6050-4.ucode
    firmware: iwlwifi-6000-4.ucode
    firmware: iwlwifi-1000-3.ucode
    srcversion: 8F7F4C6196599FCA596C837

    Hi  sparhk, and welcome.
    One of the Lenovo staff who frequents the forum put out a call to help you in a private forum.  I do a little Linux, so I poked into it.  To my amazement my first Google hit was your thread where you indicate you have solved the problem.  (At least, it _looks_ like you...)
    May I respectfully suggest that a post back here indicating success would be a nice touch?  That way anyone who passes by looking for help with this issue will have a better chance of finding it.  For posterity, here it is (see post number 25):
    [SOLVED] Intel 6205 wireless not working with Lenovo W520
    Glad you got it working,
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • TC 2 TB A1409 Wan internet connection no longer working but light is still green?

    TC 2 TB A1409 Wan internet connection no longer working but light is still green?
    My TC and modem have been up and running for at least the last 2 years without any issues.
    It recently started acting up and I would have restart it as I had no internet access. All of a sudden My TC stopped connecting to internet regardless of restart. Utility shows i have no internet connection. I had all the correct green lights on my modem. I figured it might be the modem and connected directly to single ethernet port in modem to my mac book and it worked. When I reconnect modem to TC and restart Modem, TC still shows no internet connection in utility even though I'm getting green sync light on TC.
    Help Please.
    I'm out of warranty, I have not reset to default yet, Im not sure if I will loose my TC back up data.
    please advice
    Remy

    The Gen4 has some nasty faults.. mostly unrepairable...
    If the WAN is gone it becomes pretty well useless at least in its current role as router.
    You might still be able to plug it in by ethernet to a LAN port in bridge.
    Do try a full factory reset.. always worth a go.
    No files will be lost on the hard disk.
    The Factory Reset universal
    Unplug your TC/AE. Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
    Release reset.
    If it doesn’t flash rapidly you have released reset at some point and try again.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Check the ethernet LED is going on.. both on the modem and the TC WAN port.
    Do you have any applecare on a computer? If so it might cover the TC.. the rules are complicated but if the TC was bought within 2years before or after the computer it is covered up to max of 3years. You can still get coverage therefore if the TC is over 1 year but less than 2 years by buying applecare now on a computer or an Apple TV which is not too expensive. You can sell off the Apple TV without even opening it.. but use the applecare on it to get your TC replaced.
    Only the very first Gen4 will be up to 3years.
    Did you have a lightning storm or something btw?? Sometimes the modem can survive and pass the parcel to the TC which seems rather fragile.
    There is also a trick to test..
    You must have v5 airport utility.. any older Macs, or windows computer you can load on 5.6 utility .. even dual boot/parallels mac.
    Go to the WAN setup.. and set the ethernet port to 10mbit half duplex.
    Sometimes a damaged port can still manage the slowest speed.. by magic.

  • My speakers are not working but it still makes a sound when it boots up

    my speakers are not working but it still makes a sound when it boots up.

    Take each of the following steps that you haven't already tried.
    1. Start with the steps recommended in this support article.
    2. If your model has an audio-out (headphone) port, and a red light is coming from it, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
    3. Boot in safe mode. Don't log in; just reboot as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
    4. Reset the NVRAM.
    5. Reset the SMC.
    6. Reinstall OS X after backing up all data.
    7. Make a "Genius" appointment at an Apple Store.

  • S10-3t bluetooth and wireless not working with windows 8

    S10-3t bluetooth and wireless not working with windows 8. I tried everything but doesn't work at all. I don't know where to find the new drivers that are comatible with windows 8 ???!!! please help me to solve this problem because i tried everything....

    Do you still have your windows7 install files ? 
    ( installation image is usually in LENOVO_PART OKRBackup/Factory ) ? I lost them :\
    if yes I fear you have to enable it in win7 and then use it in win8
    http://rzr.online.fr/q/lenovo# g470 s103t (Please Contact me if your s10-3T is booting win7 or support bluetooth, 3g)
    Lenovo S10-3t | Model Name : 0651 | Mfg Date: 2010/06/08
    Lenovo G470 | Model Name : 20078 | M fg Date: 11/03/23 | BIOS: 40CN23WW(V2.09) 06/20/2011 | CPU: i5-2410M | Linux version 3.3.4lenovog470+ (root@lap) (gcc version 4.6.3 (Debian 4.6.3-4) ) #8 SMP Tue May 1 10:23:48 CEST 2012
    OS:GNU/Linux/Debian

  • Pavilion G6 2016TX -WiFi is not working but bluetooth is working

    Hi,
    WiFI on my Pavilion G6-2016TX  is not working, but bluetooth is working. I do not know what happened. Screen shot of device manager is attached. In the list i could no find any WiFi devices.Please help me to resolve this problem.

    Hello, @vizz007 
    I see that you're missing the wireless driver from Device Manager. I will try to assist you with this.
    Were any changes or updates made prior to this occurring?
    Did this just recently occur? If yes, start by doing a system restore.
    You can also installing the driver, start with the HP Support Assistant. If this doesn't allow you to install a driver, then you can try from here: HP Pavilion g6-2016tx Notebook PC Drivers.
    If you cannot get the driver to install this way, try the HP Recovery Manager. This will allow you install the original factory installed driver.
    If that doesn't work, then you may want to test the hardware. This document can help you with that: Testing for Hardware Failures (Windows 7, Vista).
    Let me know how this goes for you.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

    Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

    Sighhhh, wasted so much time yesterday and today going around Sony centre and then carphone warehouse. They told me to come back after Easter.
    I came home, banged the phone against the wall and it worked.
    Turned out that mic was working on loud speaker and when using headphones so I thought that the secondary mic is working and the main one (placed with the speakers) isn't. So I banged that part against the wall slightly (in plastic case to prevent scratches) then put the phone underwater, waited for it to dry and now it's working. Idk how well and if it's of perfect quality again but people can hear me well.

  • Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine

    Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine.
    This is a brand new MacBook Pro (15-inch, mid-2012) just received.  I suspect that this is a hardware problem as:
    The mini-displayport to DVI adapter and the external monitor that I am utilizing connect and operate just fine using my older MacBook Pro (mid-2010) with the same OS.
    The new MacBook Pro powers the external monitor with a mini-displayport to VGA adapater without issue.
    The new MacBook Pro powers an Apple Thunderbolt display without issue.
    Both MacBook Pro's are running OSX Lion 10.7.4.
    The only combination which does not work is the mini-displayport to DVI adapater used in conjunction with the brand new MacBook Pro (mid-2012).
    All adapters and components (mini-displayport adapters) are Apple retail adapter.
    I have tried several external monitors, including my Dell U2412m.
    When I connect the mini-displayport to DVI adapater to the new MacBook Pro (mid-2012), nothing happens. The external monitor reports "no signal" and attempts to go into sleep mode.  Using the "Detect displays" button has no effect, even when used multiple times.  Rebooting does not help, nor does resetting the SMC or PRAM.
    Any other suggestions before I take it to the Genius Bar?

    I turns out that the logic board of my MacBook Pro was faulty (despite being brand new).
    I took it to the Apple Store, presented the problem, and one of the Tech's came to the same conclusion that I had -- hardware failure.  Phone support was no help in the matter (and even told me that what I was trying to do wasn't a supported option, which is rediculous).  However, the Genius Bar did take care of the problem, and my MacBook Pro was back to me with a replaced logic board within a few days.
    Hope that htis helps.

  • Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q with a real time mode but it is not working but when i run it with uploading it into the PXI it save in to the file

    Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q and DAQ NI PXI-6229 with a real time mode but it is not working but when i run it without uploading it into the PXI it save in to the file please find attached my vi
    Attachments:
    PWMs.vi ‏130 KB

     other problem is that the channel DAQmx only works at real time mode not on stand alone vi using Labview 8.2 and Real time 8.2

  • My home button is not working but apple will not honor the limited warranty

    My home button on my ipod touch is not working but Apple will not honor the limited warranty because the corner glass is craked.  I have been using it cracked for months.  What is my legal recourse.  I think it is unfair!!!!!!

    tracy252 wrote:
    My home button on my ipod touch is not working but Apple will not honor the limited warranty because the corner glass is craked.  I have been using it cracked for months.  What is my legal recourse.  I think it is unfair!!!!!!
    Hire a lawyer.

  • HT204023 hi there can any one help me i have a iphone 5 but my mobile internet not working but i can connect to my wifi no bother

    hi there can any one help me i have a iphone 5 but my mobile data is not working but a can connect to my wifi no bother

    talk to your carrier about the data subscription and possible settings changes to their apn than

  • I need to get into contact with Adobe support on renewal of my CC subscription which does not work but I cannot find any PHONE number just the referral to this forum - help, what should I do?? Thanks!!

    I need to get into contact with Adobe support on renewal of my CC subscription which does not work but I cannot find any PHONE number just the referral to this forum - help, what should I do?? Thanks!!

    Use the web chat:
    Contact Customer Care
    Mylenium

Maybe you are looking for