1110 error, need help importing cds

Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
VIA K7VM2
iTunes 6.0.1.3
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: S3 Graphics ProSavageDDR\S3 Compatible Display Adapter
IDE\DiskST340014A______________________________3.06___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomOPTORITECD-RW_CW4801___________________150E___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: OPTORITE CD-RW CW4801, Rev 150E
Audio CD in drive.
Found 10 songs on CD, playing time 39:14 on Audio CD.
Track 1, start time 00:02:32
Track 2, start time 04:36:30
Track 3, start time 09:13:05
Track 4, start time 11:49:67
Track 5, start time 16:52:32
Track 6, start time 20:22:62
Track 7, start time 22:55:20
Track 8, start time 26:49:12
Track 9, start time 31:59:72
Track 10, start time 35:34:35
Audio CD reading failed. Error Code: 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 12 16 20 24 32 40 48.
The drive CDRW speeds are: 4.

gooner,
Error 1110 is "Unable to initialize (enable) the generator commands".
You have old firmware in that drive. We need to update that. Go to the Optorite support page. Search down the page for "CW4801". The latest version of firmware is 220E and you are running 150E.

Similar Messages

Acrobat Error - need help! - Acrobat 9 Pro

When I try to open an acrobat files my it trys to Open EVERY acrobat file on my computer and does so until I get the following message
"There was an error opening this document. The maximum number of files are already open. No other files can be opened or printed until some are closed"
Then I have to force quit.
This just started happending a few months ago
I am on a Mac OSX
I need help! Any suggestions?
Debbie

I have a 10.5.8
I am not that technical so not sure what you mean about applejack etc.
Thanks for helping!
Debbie
Date: Sat, 10 Apr 2010 13:03:28 -0600
From: [email protected]
To: [email protected]
Subject: Acrobat Error - need help! - Acrobat 9 Pro
What version of OS X? Some people have luck by clearing their caches. This can be done with Applejack in 10.5. Onyx will work in SL.
>

I need help importing navigation bars and rollover buttons from fireworks?

I need help importing navigation bars and rollover buttons from fireworks, drop down menus and rollover states won't work!
Thanks

In my experience, the code created by graphics apps is less than satisfactory. And image based menus are very awkward for several reasons.
#1 If you decide to change your menu later, you must go back to your graphics app and re-craft the whole thing. After 2-3 times of this, it gets old in a hurry.
#2 Image based menus cannot be "seen" by search engines, screen readers and language translators.
#3 CSS styled text menus are better for your site's visibility, accessibility and they are a snap to edit in Dreamweaver.
That said, if you're still married to image based menus, use Fireworks to create images only. Use Dreamweaver's Image Rollover Behaviors to create your rollover scripts.
Nancy O.

User Error Needs Help Correcting - Repeatable Tag on Custom Section Attribute

OK, I have v.6111. Today I am manually putting the supplier_eq_create tag on all the the existing attributes in our custom sections so suppliers can add them when we send eQs. Unfortuately, I accidently clicked on the Repeatable tag instead of Supplier_EQ_Create in a couple of instances in our Export/Staging Environment. When I try to remove the Repeatable tag, I get the error that says " row's Repeatable status cannot be altered after the row has been activated" ... we have not actually used the repeatable functionality of the tag. I need to know how I can remove this tag from active attributes due to human error before I import to PROD. Can the forum help me?
Best, Beckie

Hi Beckie,
As long as you are sure that no-one has consume this you can remove this tag with a database script.
As with every script make sure that you backup your data.
With the following script you can find the rows that contain repeatable tag for a particular section template
select rowTemplate.* from eaSectionDynamicTagJoins rowTTagjoin
inner join commonEARowTemplate rowTemplate on rowTemplate.pkid = rowTTagjoin.fkEAS
inner join commonLookups tag on tag.pkid = rowTTagjoin.fkTag
inner join commonEASectionTemplate sectionTemplate on sectionTemplate.pkid = rowTemplate.fkSectionTemplate
where tag.Name = 'Repeatable' and langID = 0 and Category = 'EASRowDynamicTag'
and sectionTemplate.id = '<custom section id>';
Tags are linked to custom section row templates using eaSectionDynamicTagJoins table.
You can remove the tag from a specific row using the following script
delete from eaSectionDynamicTagJoins
where fkEAS = '<pkid of the row>';
Hope this helps. Let me know if you have any questions,
Dmitriy

Need help importing a project

I got a virus on my mac so i took all stuff off my computer and put it on an external hard drive including an imovie project. I wiped my computer and imported all of my stuff including this imovie project. I downloaded Yosemite and the new imovie software and now when i try to import this imovie project it doesnt work and will not import it says its not compatible. This imovie project says its format is an imovie project, i just need to import it into imovie again so i can work on it, thanks.

Hello there, if you're still looking for help you might not be in the right forum. This fourm is all about Azure SQL Database.

NEED Help Importing new Activities.

Hi All,
I am working on a project where I have been asked to add two new activities to all the 841 WBS codes belonging to the project. That means I have to add around 1600 new activities. So instead of going through the tedious task of adding those manually, I was wondering if there was an easier way like importing from Excel or anything else to do this. I need to finish this within this week, so I need help urgently.
Please Help

You can absolutely add new activities in via Excel import however how much easier this ultimately is depends on the structure of your project (ActIds, Codes, Relationships, etc) and the underlying data to be added.
In a large project I have some exposure to Excel is used frequently to make activity level additions/changes, but the schedulers spent a decent amount of time early in the project re-naming activity ID's for grouping purposes (I believe specifically to help with excel imports).
If your additions to each WBS follow any sort of consistent pattern then it may be quicker to use Excel. Even if it ends up not saving much time initially, at the very least you will have a process down for the next time you need to make major changes to your schedule.

Exception error, Need Help!

Need help!
Why my java program work well under C:\, but can't under D:\Java today? It worked well even yesterday. I had tried the "Hello World", it can not work under D:\Java either.
when I enter the "java d:\java\Hello" order(after javac of cause), those displays are here:
Exception in thread "main" java.lang.NoClassDefFoundError: d:\java\Hello
Caused by: java.lang.ClassNotFoundException:d:\java\Hello
at java.net.URLClassLoader$1.run<URLClassLoader.java:200>
at java.security.AccessController.doPrivileged<Native Method>
at java.net.URLClassLoader.findClass<URLClassLoader.java:188>
at java.lang.ClassLoader.loadClass<ClassLoader.java:306>
at sun.misc.Launcher$AppClassLoader.loadClass<Launcher.java:276>
at java.lang.ClassLoader.loadClass<ClassLoader.java:251>
at java.lang.ClassLoader.loadClassInternal<ClassLoader.java:319>
The Hello.java has no problem,and it worked well even yesterday!
I just don't know what had happened.
Someone who can help me please reply or email at [email protected]
Thank you!

The simple "Hello World" can work under Editplus, but can't under DOS.
The error appears as the same. I don't know what I should do, could you tell me please?
Thank you!First test whether environment variables had been set properlyor not
To test :-
1) Open cmd
2) type java
3) If it runs that means you have set it properly
Then go to your program directory i.e d:\java\
and type
javac Hello.java //to compile it and then
java Hello //To run it

I Need Help Importing my Contacts Onto my New (old) Palm phone.

I need to import my contacts onto my Palm Centro. As of now, they are in a .csv file. When I select import from the Palm Desktop file menu and browse for my contact file, it shows the file grayed out. Even if I instruct the program to allow all file types, it doesn't work. I've read that the Centro needs a .aba file- but I can't find a converter that works.
I'm on a Mac but it has OSX and Windows 7, so I can use any program/service that you guys can suggest. Even if you don't know a program that can do what I need, I also want to know definitively what file format my Palm Centro wants these contacts.
I know this is an old phone, but there must be a way to do this (and avoid typing in 400+ contacts).
Thanks very much in advance!
Post relates to: Centro (Sprint)

Have you tried this program?
http://www.schaik.com/download/palmaba.html
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Need Help importing data using PHP to convert it into a single HTML line

Hi, My names Chance
I'm a 2nd year web design student and have been assigned a project by my teacher for a charity website
i found a tutorial of exactly what i need to do but im stuck on creating a script to import and convert php data
to a single html line
heres the link to the the script, if you scroll down to the bottom
where it says
RSS or XML Data Source
"The scrolling text can be imported from any source: RSS, XML or any other format.
For example, if you want to import data using PHP to convert it into a single HTML line to be displayed by the ticker, create a php script to import and convert the data, and include it directly in the DIV tag as follow"
this is what i need help doing
http://www.mioplanet.com/rsc/newsticker_javascript.htm
i already have the php code that i want to import
i just need to know how to import and convert my php script so im able
to make the the javascript from the link i provided to work
thank you so much for your time
if you have any question or answer please email me
[email protected]
thanks again hope to here from you soon

Hi
The instructions are there on the page you provided a link to!
What is it you do not understand?
PZ
www.pziecina.com

Need help. importing pictures to timeline with various length.

Need help cant find old toturial
I am trying to make a template for a picture movie where i have everything ready so i just need to add 250 pictures and then it will automaticly shift the pictures to the beat of the music. I once saw a toturial how to do this but cant find it. it was something with manually setting markers at the music beat and then just add all the pictures. but i must have missed something pls help..
Bo

Its called automate to sequence with unnumbered markers.
http://tv.adobe.com/watch/learn-premiere-pro-cs5/gs04-making-a-rough-cut-in-adobe-premiere -pro/
http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7d1ba .html

General exception error need help!

Experts,
i am facing this problem. i connect to the net by proxy (through office Lan). none of the java applets work for me. Need help
Java Plug-in 1.5.0_08
Using JRE version 1.5.0_08 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\mkrishna
network: Loading user-defined proxy configuration ...
network: Done.
network: Loading direct proxy configuration ...
network: Done.
network: Proxy Configuration: No proxy
basic: Cache is enabled
basic: Location: C:\Documents and Settings\mkrishna\Application Data\Sun\Java\Deployment\cache\javapi\v1.0
basic: Maximum size: unlimited
basic: Compression level: 1
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
basic: Registered modality listener
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@872380, refcount=1
basic: Registered modality listener
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@872380, refcount=2
basic: Registered modality listener
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@872380, refcount=3
basic: Added progress listener: sun.plugin.util.GrayBoxPainter@15212bc
basic: Loading applet ...
basic: Initializing applet ...
basic: Starting applet ...
basic: Added progress listener: sun.plugin.util.GrayBoxPainter@97a560
basic: Loading applet ...
basic: Initializing applet ...
basic: Starting applet ...
basic: Added progress listener: sun.plugin.util.GrayBoxPainter@1ea5671
basic: Loading applet ...
basic: Initializing applet ...
basic: Starting applet ...
basic: httpCompression = true
network: Connecting http://150.101.78.39/dsmapp/catalog/classes/liste.jar with proxy=DIRECT
network: Connecting http://150.101.78.39/dsmapp/catalog/classes/ZoneFavoris.class with proxy=DIRECT
network: Connecting http://150.101.78.39/dsmapp/catalog/classes/ZoneFavoris.class with proxy=DIRECT
network: Connecting http://150.101.78.39/dsmapp/catalog/classes/Outline.class with proxy=DIRECT
network: Connecting http://150.101.78.39/dsmapp/catalog/classes/ZoneFavoris/class.class with proxy=DIRECT
network: Connecting http://150.101.78.39/dsmapp/catalog/classes/ZoneFavoris/class.class with proxy=DIRECT
load: class ZoneFavoris.class not found.
java.lang.ClassNotFoundException: ZoneFavoris.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
basic: Exception: java.lang.ClassNotFoundException: ZoneFavoris.class
java.lang.ClassNotFoundException: ZoneFavoris.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
basic: Modality pushed
basic: Modality pushed
basic: Modality pushed
basic: Modality popped
basic: Modality popped
basic: Modality popped
basic: Modality pushed
basic: Modality pushed
basic: Modality pushed
basic: Modality popped
basic: Modality popped
basic: Modality popped
network: Connecting http://150.101.78.39/dsmapp/catalog/classes/Outline/class.class with proxy=DIRECT
load: class ZoneFavoris.class not found.
java.lang.ClassNotFoundException: ZoneFavoris.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
basic: Exception: java.lang.ClassNotFoundException: ZoneFavoris.class
java.lang.ClassNotFoundException: ZoneFavoris.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
basic: Modality pushed
basic: Modality pushed
basic: Modality pushed
basic: Modality popped
basic: Modality popped
basic: Modality popped
load: class Outline.class not found.
java.lang.ClassNotFoundException: Outline.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
basic: Exception: java.lang.ClassNotFoundException: Outline.class
java.lang.ClassNotFoundException: Outline.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
basic: Modality pushed
basic: Modality pushed
basic: Modality pushed
basic: Modality popped
basic: Modality popped
basic: Modality popped

Hi
I think you need to configure proxy for the JRE
If you are using windows Go to control panel , you will find an icon called java plugin. if you have installed multiple JRE you will find multiple icons . Select the one which is configured to browser.
You will find a proxies tab in that window , add the proxy details there
Hope this helps you
Vijay

I need help importing my songs from CDs

i've imported my cd's to my itunes and it shows up in my library on my laptop , but it doesnt show up on my ipod.

Is its memory full? You may need to delete some songs.
Try changing the iPod's options to just sync music that you checked:

CD Burn Error - need help plz

My iBook is 3 yrs old now, and its worked flawlessy until about a month ago when I inserted a cd-r into the drive and it started making a grinding sound, very loud. Now it wont burn cds, gives me an error every time. Ive experienced this in iTunes, and Roxio Toast. The drive can read fine, and it imports ok most of the time, although the grinding sound is there when im importing as well. Im wondering what my options are. Any and all help is appreciated.

Hi Becca:
Just click on the little  in the upper left-hand corner, click ' About this Mac', More Info..and open your System Profiler. Under ATA you should se something like this:
MATSHITA DVD-R UJ-825:
Manufacturer: MATSHITA
Model: MATSHITA DVD-R UJ-825
Revision: DBN7
Serial Number:
---> Drive Type: CD-RW/DVD-RW
Disc Burning: Apple Supported/Shipped
Removable Media: Yes
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
That will tell you.
Sue

I need help importing Videos in Encore CS3 (running on a Mac)

I want to make a DVD with Encore CS3 (running on a Mac).
I've never used Encore before.
I want to import movie files as Assets.
The only files I've had any luck importing are .mov files (exported by Quicktime Pro).
The movies I want to import are .AVI and .MP4 files.
When I import .AVI files I receive an error message saying;
'The Software that's used to decode the media is not available on this system. Installing the correct decoders for the files you are working with may help to correct the problem.'
When I import .MP4 files I don't get any error massages but encore recognizes each file as an audio file (Type: Audio File).
When I drag the .MP4 files into the timeline and view them in the monitor I receive sound but not picture.
It seems to me like I'm missing an important codec but I don't have a clue what to do.
Please reply ASAP I need to make a DVD for my Dad.

Encore likes to work with DVD-compliant files, like DV-AVI, MPG2 (transcoded to DVD specs), PCM-WAV files and the like. MOV files are usually handled pretty well too, as you have seen.
Your AVIs are probably DivX encoded, or similar, and you'll need to install the DivX CODEC (free for the PC, but have no clue about the MAC). Those are also heavily compressed files, and when you transcode before burning the DVD, they'll be re-compressed more. The quality might suffice, but they will not look good.
I do not know file format conversion programs for the MAC, but there are a ton of freeware, shareware and full-commercial ones available. DigitalMediaConverter (for PC) is ~US$40 and works well with a lot of different files in different schemes, both Audio & Video. You still need the proper CODECs on your machine to decode and then the proper CODECs to encode during the conversion. It might take some Googling, but you should be able to find both the file conversion programs and the necessary CODECs on the Web.
On PC, I use a little freeware program, G-Spot, to tell me all the details of any problem file. It might be available for MAC, but I do not know. It won't convert, or fix your files, or your system, but will tell you almost anything you'll need to know, especially the CODEC used and if your system has that one installed.
Good luck, and sorry that I know nothing of the software available for the MAC.
Hunt

Scholar92 - Strange error Need help please

Lecori Salutem
The program I have a problem with is supposed to extract info from a DB. It extracts the info perfectly but I cannot access the info with my get commands from other classes.
When i fire the program it says " [Ljava.lang.String;@1ba34f2 ". Can anyone help me to solve this problem please.
////////CODE STARTS HERE
import java.sql.*;
import javax.swing.*;
/** Description:
* Die program word gebruik om al die metadata en paths wat getabuleer is
* op die Music DB te access en te stoor.
* @author Benni( [email protected])
public class SQLImport
    private Connection connSQL;
        int tel = 2; // ID in SQL tabel begin by "2"
        String [] tName = new String [100];
String [] tArtist = new String [100];
String [] tGenre = new String [100];
String [] tMood = new String [100];
String [] tPath = new String [100];
String [] tJavaPath = new String [100];
String [] tID = new String [100];
String [] tTime = new String [100];
public SQLImport( )
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
connSQL = DriverManager.getConnection("jdbc:odbc:DRIVER={Microsoft Access Driver (*.mdb)};DBQ=Music.mdb");
JOptionPane.showMessageDialog(null, "Connection Successfully Established", "Notification",JOptionPane.INFORMATION_MESSAGE);
catch (Exception sqlConnectionFailed)
JOptionPane.showMessageDialog(null, sqlConnectionFailed, "ERROR:",JOptionPane.ERROR_MESSAGE);
Statement statement = null;
try
statement = connSQL.createStatement( );
catch (SQLException statementERROR)
JOptionPane.showMessageDialog(null,statementERROR, "ERROR:",JOptionPane.ERROR_MESSAGE);
char optionChoice;
do
optionChoice = getMenuChoice();
if(optionChoice == 'A')
try
String querySQL = "SELECT * FROM tbl_ListedMusic ORDER BY ID ;";
System.out.println(querySQL);
ResultSet resultSet = statement.executeQuery(querySQL);
while (resultSet.next( ))
tID[tel] = resultSet.getString("ID");
tName[tel] = resultSet.getString("TrackName");
tArtist[tel] = resultSet.getString("TrackArtist");
tTime[tel] = resultSet.getString("TrackTime");
tGenre[tel] = resultSet.getString("TrackGenre");
tMood[tel] = resultSet.getString("TrackMood");
tJavaPath[tel] = resultSet.getString("TrackJavaPath");
tPath[tel] = resultSet.getString("TrackPath");
tel++;
catch (SQLException infoImportError)
JOptionPane.showMessageDialog(null,infoImportError, "ERROR:",JOptionPane.ERROR_MESSAGE);
while (optionChoice != 'X');
//NB! Strings are " " chars are ' '
public String[ ] gettID( )
return tID;
public String[ ] gettName( )
return tName;
public char getMenuChoice( )
String menu = "A) Import .mp3 info \n X) Exit";
char choice = JOptionPane.showInputDialog(menu).toUpperCase( ).charAt(0);
return choice;
public static void main (String [ ] args)
SQLImport sql = new SQLImport( );
String [ ] blah = new String [10];
blah = sql.gettID();
System.out.println(blah);
//Code ENDS
How do I resolve the " [Ljava.lang.String;@1ba34f2   " ? Much apreciated
Regards,
Bennu

This forum is about the Messaging Server email server and related products. I think you have posted this question in the wrong forum.

1110 error, need help importing cds

Similar Messages

Maybe you are looking for