1122: ERROR: No space in Bulletin Board

there are many errors in ULOG file as follows::
"112700.jxnxmbps1!?proc.28324.2044464144.0: LIBTUX_CAT:1122: ERROR: No space in Bulletin Board
112700.jxnxmbps1!?proc.28324.2044464144.0: LIBTUX_CAT:582: ERROR: Unable to register, registry table full"
but this kind of error message didn't appeared all the time , it also had normal message like behind:
"112701.jxnxmbps1!MRSVR.3928.1435417904.0: Successful [jxnx_atm] channel total dealing time:[463]ms"
it disaperad as follows::
030327.jxnxmbps1!MRSVR.3865.3549699376.0: Successful [jxnx_atm] channel total dealing time:[3835]ms
030327.jxnxmbps1!MRSVR.3869.3589434672.0: Successful [jxnx_atm] channel total dealing time:[2084]ms
030327.jxnxmbps1!MRSVR.3865.3549699376.0: Successful [jxnx_atm] channel total dealing time:[686]ms
030327.jxnxmbps1!MRSVR.22260.3364805936.0: Successful [jxnx_pboc_atm] channel total dealing time:[709]ms
030328.jxnxmbps1!MRSVR.3865.3549699376.0: Successful [jxnx_pboc_atm] channel total dealing time:[328]ms
030328.jxnxmbps1!MRSVR.3865.3549699376.0: Successful [jxnx_pboc_atm] channel total dealing time:[202]ms
030328.jxnxmbps1!MRSVR.3865.3549699376.0: Successful [jxnx_atm] channel total dealing time:[83]ms
030402.jxnxmbps1!?proc.4633.1364216848.0: 10-19-2012: Tuxedo Version 9.1, 64-bit
030402.jxnxmbps1!?proc.4633.1364216848.0: LIBTUX_CAT:1122: ERROR: No space in Bulletin Board
030402.jxnxmbps1!?proc.4633.1364216848.0: LIBTUX_CAT:582: ERROR: Unable to register, registry table full
030402.jxnxmbps1!?proc.5013.2855476240.0: 10-19-2012: Tuxedo Version 9.1, 64-bit
030402.jxnxmbps1!?proc.5013.2855476240.0: LIBTUX_CAT:1122: ERROR: No space in Bulletin Board
030402.jxnxmbps1!?proc.5013.2855476240.0: LIBTUX_CAT:582: ERROR: Unable to register, registry table full
030402.jxnxmbps1!?proc.5243.3604155408.0: 10-19-2012: Tuxedo Version 9.1, 64-bit
030402.jxnxmbps1!?proc.5243.3604155408.0: LIBTUX_CAT:1122: ERROR: No space in Bulletin Board
030402.jxnxmbps1!?proc.5243.3604155408.0: LIBTUX_CAT:582: ERROR: Unable to register, registry table full
030548.jxnxmbps1!?proc.4967.4205202448.0: LIBTUX_CAT:582: ERROR: Unable to register, registry table full
030548.jxnxmbps1!MRSVR.3869.3589434672.0: Successful [jxnx_pboc_atm] channel total dealing time:[140236]ms
030548.jxnxmbps1!MRSVR.3866.2208255280.0: Successful [jxnx_atm] channel total dealing time:[144788]ms
client connect the server failed when call tpinit.error message as follows:
"tperrno[6] [TPENOENT - no entry found]"
what the issue can be? thank you!
Edited by: 962012 on 2012-10-30 下午11:37

LIBTUX_CAT:1122
ERROR: No space in Bulletin Board
Description
The calling process failed to join the application due to the lack of space in the registry table portion of the Bulletin Board.
Action
If the calling process is an application client, the administrator will need to increase MAXACCESSERS in the RESOURCES section of the configuration file. If the calling process is a server, the administrator will need to increase MAXACCESSERS and/or MAXSERVERS in the RESOURCES section of the configuration file. Note that MAXACCESSERS specifies the maximum number of processes that can have access to a Bulletin Board on a particular machine at any one time. MAXSERVERS specifies the maximum number of servers to be accommodated by the entire application at any one time.
LIB TUX : 582
ERROR: Unable to register, registry table full
Description
The BEA TUXEDO system was attempting to find a registry table slot for a process, but the registry table was full.
Action
Increase the MAXACCESSERS parameter in the UBBCONFIG file, rebuild the TUXCONFIG file, then reboot the application and try again.
[Check link| http://docs.oracle.com/cd/E13203_01/tuxedo/tux81/messages/index.htm]

Similar Messages

TMADMIN_CAT:188: ERROR: Error while obtaining the Bulletin Board parameters

Hi ,everybody
When I created and configured a App server domanin with PSADMIN, these errors below occurred,but log files didn't have useful info:
PeopleSoft Domain Boot Menu
Domain Name: HCMDOM
1) Boot (Serial Boot)
2) Parallel Boot
q) Quit
Command to execute (1-2, q) [q]: 1
Archived a copy of the domain configuration to /appfs/people/opt/PS/PS_CFG_HOME/appserv/HCMDOM/Archive/psappsrv.cfg
Attempting to boot bulletin board...
tmadmin - Copyright (c) 2007-2008 Oracle.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by Oracle.
Tuxedo is a registered trademark.
TMADMIN_CAT:188: ERROR: Error while obtaining the Bulletin Board parameters
==============ERROR!================
Boot attempt encountered errors!. Check the TUXEDO log for details.
==============ERROR!================
Do you wish to see the error messages in the domain log file? (y/n) [n] :y
PSADMIN.23310 (0) [11/30/12 10:58:42](0) Begin boot attempt on domain HCMDOM
PSADMIN.23310 (0) [11/30/12 10:58:42](0) End boot attempt on domain HCMDOM
Do you wish to see the error messages in the Tuxedo log file? (y/n) [n] : y
105842.peoplesoft.ynby.cn!PSADMIN.23310: Begin attempt on domain HCMDOM
105842.peoplesoft.ynby.cn!PSADMIN.23310: End boot attempt on domain HCMDOM
Press Enter to continue...
Don't know how to solve it ...

Hi,Nicolas
Before I booted up the app server ,I set the environment variable PS_CFG_HOME to /appfs/people/opt/PS/PS_CFG_HOME,and the above error occured,but when I unset the PS_CFG_HOME,it booted up successfully.But another error occured when booted up :
exec PSMONITORSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 232457 -D TESTSERV -S PSMONITORSRV : Failed.
tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
exec tmshutdown -qy
I checked the pemission to boot up app server :
SQL> SELECT CLASSID, STARTAPPSERVER FROM PSCLASSDEFN WHERE CLASSID IN (SELECT OPRCLASS FROM PSOPRCLS WHERE OPRID='PS');
CLASSID STARTAPPSERVER
PSAPPS 1
EOEN9000 1
EOCO9000 1
PTPT1100 1
PTPT1200 1
PTPT1300 1
and update:
SQL> UPDATE PSCLASSDEFN SET STARTAPPSERVER=1 WHERE CLASSID='PSAPPS';
1 row updated.
SQL> UPDATE PSCLASSDEFN SET STARTAPPSERVER=1 WHERE
CLASSID='EOEN9000';
1 row updated.
SQL> UPDATE PSCLASSDEFN SET STARTAPPSERVER=1 WHERE
CLASSID='EOCO9000';
1 row updated.
SQL> UPDATE PSCLASSDEFN SET STARTAPPSERVER=1 WHERE CLASSID='PTPT1100';
1 row updated.
SQL> UPDATE PSCLASSDEFN SET STARTAPPSERVER=1 WHERE CLASSID='PTPT1200';
1 row updated.
SQL> UPDATE PSCLASSDEFN SET STARTAPPSERVER=1 WHERE CLASSID='PTPT1300';
1 row updated.
After doing these,it booted up with the error:
exec PSRENSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -D TESTSERV -S PSRENSRV :
Failed.
tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
Then I configured the REN server :
Values for config section - PSRENSRV
log_severity_level=Warning
io_buffer_size=8192
default_http_port=7180
default_https_port=7143
default_auth_token=<my hostname>
Boot up app server again :
Booting server processes ...
exec PSWATCHSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 42933 -D TESTSERV -S PSWATCHSRV :
process id=24245 ... Started.
exec PSAPPSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D TESTSERV -S PSAPPSRV :
process id=24246 ... Started.
exec PSAPPSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D TESTSERV -S PSAPPSRV :
process id=24256 ... Started.
exec PSSAMSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -D TESTSERV -S PSSAMSRV :
process id=24266 ... Started.
exec PSRENSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -D TESTSERV -S PSRENSRV :
process id=24273 ... Started.
exec PSMONITORSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 42933 -D TESTSERV -S PSMONITORSRV :
process id=24279 ... Started.
exec WSL -o ./LOGS/stdout -e ./LOGS/stderr -A -- -n //<my hostname>:7000 -z 0 -Z 0 -I 5 -T 60 -m 1 -M 3 -x 40 -c 5000 -p 7001 -P 7003 :
process id=6834 ... Started.
7 processes started.
Here is my configurations:
OS:RHEL 5.4
DATABASE:ORACLE Database 11.2.0.1
Peoplesoft Tools: 8.52
Application version:HCM 9.1
Domain configuration:
Quick-configure menu -- domain: HCMAPP
Features Settings
========== ==========
1) Pub/Sub Servers : No 16) DBNAME :[PEOPDB]
2) Quick Server : No 17) DBTYPE :[ORACLE]
3) Query Servers : No 18) UserId :[PS]
4) Jolt : No 19) UserPswd :[PS]
5) Jolt Relay : No 20) DomainID :[TESTSERV]
6) WSL : Yes 21) AddToPATH :[.]
7) PC Debugger : No 22) ConnectID :[people]
8) Event Notification: Yes 23) ConnectPswd:[peop1e]
9) MCF Servers : No 24) ServerName :[<my hostname>]
10) Perf Collator : No 25) WSL Port :[7000]
11) Analytic Servers : No 26) JSL Port :[9000]
12) Domains Gateway : No 27) JRAD Port :[9100]
It seems OK,But when I tested the 3-tier connection :
It prompted: Could not connect to appliaction server HCMAPP.possible causes are:the server name/IP address and port for the application server alias are incorrect....
Contect your system administrator to check the Tuxedo log for more information
But I can sign on the database using Application Designer,and app server already booted up.
Additional ,the Tuxedo and Weblogic were installed within different directorys,does it matter?
Do you need more configuration info?
Thanks for you to reply my questions ~

Satellite L650-1PE - Error messages in Toshiba bulletin board

I got error messages when i try to use Toshiba bulletin board, so firstly I got error 3 and then i press ok and i got error 23 which i don't know why? By the way, my laptop Satellite L650-1PE.
Also I uninstalled it and reinstall the latest version again but I got the same error messages. Please anyone can help me about it.
Thanks in advance.

Hi
Error code 23 is not specific to a Toshiba Bulleting Board software.
This error is generated by Windows OS and the reason for this could be:
Windows Registry Damage or Corruption
Device Driver Conflicts
Hardware Malfunction
Virus or Spyware Infection
Software File Damage or Corruption
So as you see, its really difficult to say what cause this
You can uninstall this software, could clean the registry using CCleaner and then you could try to reinstall this software once again if the new installation does not help, then I would recommend checking new OS installation but I think its really annoying to reinstall the Toshiba image only to get this software working again but its your decision

Clean Bulletin Board - errors LIBTUX_CAT:328 and LIBTUX_CAT:397

Hi all,
I have these error in ULOG - Tuxedo 8.0 (Patch Level 310 - HP-UX B.11.00
145631.s396d0!stfwd.17091.1.0: gtrid x0 x4832bad8 x33db: LIBTUX_CAT:328:
ERROR: No space in Bulletin Board for Transaction Table
145631.s396d0!stfwd.17091.1.0: gtrid x0 x4832bad8 x33db: LIBTUX_CAT:397:
ERROR: Cannot allocate entry on GTT
Please how can I clean (empty) this Bulletin Board without reconfiguring the application ?
Thanks a lot,
Lada

Hi all,
I have these error in ULOG - Tuxedo 8.0 (Patch Level 310 - HP-UX B.11.00
145631.s396d0!stfwd.17091.1.0: gtrid x0 x4832bad8 x33db: LIBTUX_CAT:328:
ERROR: No space in Bulletin Board for Transaction Table
145631.s396d0!stfwd.17091.1.0: gtrid x0 x4832bad8 x33db: LIBTUX_CAT:397:
ERROR: Cannot allocate entry on GTT
Please how can I clean (empty) this Bulletin Board without reconfiguring the application ?
Thanks a lot,
Lada

Scheduled Delivery Bulletin Board

This post informs customers as to the current status of Scheduled Delivery Print Apps and links to available resources
Scheduled Delivery Status- As of last edited date
Today
On Time
All Print Apps are on schedule.
Yesterday
On Time
All Print Apps were on schedule yesterday.
Unwanted fax or content? Check out this Forum Post or URL
Facebook Registration Discontinued click here
Are you having a problem with a Scheduled Delivery?
Check out this Forum post to resolve some more common Scheduled Delivery problems.
Post on the Forum- DO NOT reply to this bulletin board post. Post a new topic on the forum, Use the title of ‘Scheduled Delivery’ in the title and then list the issue. Example ‘Scheduled Delivery .......(insert issue here).......’
Search the Forum- Search the Forum for ‘Scheduled Delivery’ and look for others who have had similar issues resolved.
FAQ’s- Scheduled Delivery FAQ’s are located on the ePrintCenter with the Print Apps at the following location FAQ's
Current Scheduled Delivery Printers
Current Scheduled Delivery Printers
Interested in learning about Scheduled Delivery? Learn more here:
The following print apps are currently available in selected countries with Scheduled Delivery-enabled printers:
7-Day Menu Planner, ABC Behind the News, ABC News: Business, ABC News: Entertainment, ABC News: Sport, ABC News: Top Stories, ABC News: World, Allure: Anti-Aging Idea of the Week, Allure: Daily Beauty Reporter, Allure: Hair Idea of the Day, Ann Coulter, As I See It, Astrology, Bad Reporter, Biographic, Busy Moms Weekly: About Real Estate, Busy Moms Weekly: Advice for Parents, Busy Moms Weekly: Cultivating Life, Busy Moms Weekly: Do It Yourself or Not, Busy Moms Weekly: Dr. Ruth, Busy Moms Weekly: Drive-Thru Gourmet, Busy Moms Weekly: Environmental Nutrition Newsletter, Busy Moms Weekly: Film Clips, Busy Moms Weekly: Focus on the Family, Busy Moms Weekly: For Better or For Worse, Busy Moms Weekly: Kids & Money, Busy Moms Weekly: Living Space, Busy Moms Weekly: Lovescope, Busy Moms Weekly: Natasha's Stars, Busy Moms Weekly: Omarr's Astrology, Busy Moms Weekly: Scopin' the Soaps, Busy Moms Weekly: Smart Moves, Busy Moms Weekly: Stir It Up! (Eat in and Save), Busy Moms Weekly: Taking the Kids, Busy Moms Weekly: Tell Me a Story, Busy Moms Weekly: The Kid's Doctor, Busy Moms Weekly: The Medicine Cabinet, Busy Moms Weekly: The Right Thing, Busy Moms Weekly: The Savings Game, Busy Moms Weekly: The Smart Collector, Busy Moms Weekly: Wolfgang Puck, Busy Moms Weekly: Your Other 8 Hours, Busy Moms Weekly: Your Weekly Stars, Comics, Communication Success, Communication Success French, Communication Success Spanish, Daily Sudoku, Daily Word Puzzles, Dear Abby, Do Just One Thing, Earthweek, Epicurious: Daily Recipes, Epicurious: Healthy Dinner Tonight, Epicurious: Lunch Ideas for Kids, Epicurious: Weekly Dessert Ideas, Executive Digest, Focus on Health, Focus on the Family, Games & Puzzles Daily: Daily Commuter Crossword, Games & Puzzles Daily: Crossword Puzzler, Games & Puzzles Daily: Sheffer Crossword, Games & Puzzles Daily: Joseph Crossword, Games & Puzzles Daily: Sudoku Challenge, Games & Puzzles Daily: Kakuro, Games & Puzzles Daily: Conceptis Puzzles, Games & Puzzles Daily: Daily Sudoku, Games & Puzzles Daily: Kakuro Puzzle, Games & Puzzles Daily: Bionic Brain, Games & Puzzles Daily: Cryptograms/Anagrams, Games & Puzzles Daily: Nimble Neurons, Games & Puzzles Daily: Word Works, Games & Puzzles Daily: Word Salsa, Games & Puzzles Daily: Word Puzzles, Games & Puzzles Daily: Today's Crossword, Glamour: Beauty News of the Week, Glamour: Daily Fashion Guide, Glamour: Weekly Guide to Guys, Golf Digest: Tip of the Day, Golf Insider, HealthPro Daily, Jeu Mathématique Hebdomadaire, Kid's Weekly Activities: Uncle Art's Funland, Kid's Weekly Activities: World of Wonder, Kid's Weekly Activities: World of Wonder - Teacher's Guide, Kid's Weekly Activities: Ripley's Sudoku Kids, Kid's Weekly Activities: Kid City, Kid's Weekly Activities: www 4 Kids, Kid's Weekly Activities: You Can with Beakman & Jax, Kid's Weekly Activities: Magic in a Minute, Kids Only, Living Healthy, Lovatts, Lucky: Fashion Tip of the Week, Lucky: Guide to a More Organized Life, Magic in a Minute, Manager Tools, Manager Tools French, Manager Tools Spanish, Minute Maze, Motley Fool, msnbc.com: Top Stories, msnbc.com: TODAY, NASCAR Insider, National Perspective, News of the Weird, Pet Connection, RapidBuyr, Roger Ebert Movie Reviews, RTT News, Scott Burns, Self: Exercise Tip of the Day, Self: Healthy Finds of the Week, Self: Nutrition Tip of the Day, Smart Moves, Tell Me a Story Classic, The Daily Read: Business, The Daily Read: Entertainment, The Daily Read: International, The Daily Read: Lifestyle, The Daily Read: Sports, The Daily Read: Technology, The Daily Read: US News, The Rumor Mill, Universal Crossword, Weekly Math Game, Word Puzzles, Yahoo! Daily Digest, You Can with Beakman and Jax
Although I am an HP employee my posts and replies are my own.

mry,
You should post your question in the Ask a Question box on the Post Install Printing Issues Forum at this location:
http://h30434.www3.hp.com/t5/Post-Install-Printing-Issues-New/bd-p/PostPrint
You can copy your original message and paste it there.
Include a Subject something like this: <Model of your printer>: Copy issue
I work on behalf of HP.

Bulletin Board feature

I enjoyed the Bulletin Board on my Satellite L500 and used all the features; it's great, you can drag gadgets and personalize, I used the To Do list daily. I scheduled it to open on logon and it did. I removed the scheduled task when I found that it slowed the open. When I deleted the task, the Bulletin Board no longer opens. When I click on it to open it, it pins onto the task bar and there is a thumbnail on mouse over, but that's it. I can see my personalized BB in the preview, but it will not open. Here is what I've tried: All the troubleshooting features on Windows 7, including AutoPeek. I tried restoring to a point to before I scheduled the task 2 days prior. When I did that, the error said that my C drive is corrupted! I deleted the Bulletin Board application and installed it again from the Toshiba Application Installer. The install was successful, but the program still won't open and the thumbnail still shows my personalized BB, which is strange since I deleted that one. Any thoughts? +

I have exactly the same problem: Iwas enjoying of my bulleting board and in a moment I lost the acces to the program and the message syas: code error:23. I made all the proceedments, as you and either function to me.
But the extrange thing is tha I created a different account, only for testing, and in this one the bulletin board ins funtioning very well..... what's happenning????

Automatic folder creation fails ... trying to use the bulletin board tutor

Hello,
I would like to create a blog using KMC functionality. For this I found an sdn article on how to create an bulletin board an this tutorial has some functionality I need in the blog too.
Unfortunately I have some problems when I want to have an folder created automatically. Here are the steps I am doing:
Creating a folder in the km-content named /documents/Blog
In Content-Management > Repository Filters > Userhome Filter+ I created an filter:
Name: Blog
Priority:
URLs: Postings
Prefix: /documents
Startpath: /Blog
Then I created a folder for the km-navigation iview in the portal content. The path to the initial folder is: /alias/documents/Blog/<user.id>/Postings
But when I call the preview to see the newly created folder ... I get the error message that the object couldn't be found (translated it means something like):
Object not found /alias/documents/Blog/<user.id>/Postings
Has someone an idea what the reason could be? Is it that the automatic creation of folders is only possible in special folders?Did someone faces the same or an similar problem and could help to solve it?
Thanks a lot and have a nice weekend,
Vanessa

Hello,
It worked perfectly fine for me.
Of course only after the restart.
Regards
BP

No Bulletin board exists. Entering in boot mode

Hello,
I am getting this error:
No Bulletin board exists. Entering in boot mode
And tuxedo does not boot saying Assume pipe for all the servers.
Thanx in advance

The AP has been converted to lightweight:
C1240-K9W8-M
The K9W8 is lightweight and K9W7 is autonomous. You need a WLC for the K9W8. If you have an autonomous image, you can convert it back:
Using a TFTP Server to Return to a Previous Release
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
https://supportforums.cisco.com/docs/DOC-18268
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
http://www.youtube.com/watch?v=QQ_NuxdRhQ4
https://supportforums.cisco.com/docs/DOC-14960
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"*****

GUI Bulletin Board Question

Hello,
I want to produce a simple GUI application that mimics a bulletin board. Where there would be a GUI that people could insert a message, and I could allow others to view the past messages and possibly allow some filtering as to what they see.
I want to go from the GUI window to a text file to hold the past messages. After the text file I will probably move up to a DB, but for now, I think it is a good starter application.
I am having trouble with the IO class, because of the so many ways to read and write data, and was hoping someone may give me some guidance as to the best way to handle the IO, (which classes) or point me to a tutorial where they are reading a line at a time, and possibly putting them into a collection and then showing it in a GUI.
I know that is kind of a large question, but any assistance to get me started would be helpful, and then I can refine my questions as I begin building my project.
Thanks for your time,
Scott

Check out:
http://www.javacoffeebreak.com/java103/java103.html
and
http://java.sun.com/docs/books/tutorial/essential/io/index.html
I used the above links to come up with the above code to write to a file:
try {
FileOutputStream out = new FileOutputStream("SearchTableFile.Dat"); // Output file name
PrintStream p = new PrintStream(out); //Create a stream to write to the file.
for (int i=0; i<SearchTableFileData.length; i++) {
p.print(SearchTableFileData); //write data stored in SearchTableFileData Array
p.print("\n"); // write end of line character.
// try and catch are error handling
} catch(IOException ioe) {
System.out.println("Error: " + ioe);
To read the file back into the Array I have:
try {
DataInputStream in2 = new DataInputStream(
new FileInputStream("SearchTableFile.Dat")); // Input File Name and Stream
SearchTableFileData = new String[SearchTableFileLines];
line = in2.readLine(); //reads first line
SearchTableFileLines = 0;
while (line != null) {
SearchTableFileData[SearchTableFileLines] = line;
SearchTableFileLines += 1;
line = in2.readLine(); //reads next line
in2.close();
} catch (EOFException e) {
} catch(IOException ioe) {
System.out.println("Error: " + ioe);
Hope this helps. The file reading routine has some variable that are declared elsewhere in the code and I didn't think it was necessary to explain all of them.

Re: Did you know: Playing radio streams from bulletin board

a) Make a textfile with the url.
b) Rename the file ending to .asx.
c) Draw the file from the explorer to the bulletin board

Yes! More or less! I am very happy!
I'm using 9 desktops with "dextop". I've installed the multi-touch pack from microsoft with its "flicks". Panning is enabled in my firefox browser. It's a very good system.
(I've disabled automatic rotation. There were to much bugs with explorer.)
Sometimes the screen stops to react. The solution is the following: I hold down the hardware-key for ctrl-alt-del until the screen with the task manager appears. Then I touch cancel and everything works again.
Bulletin Board is very cool with 9 desktops: All the windows of every screen appear in the list of open windows. So applications can easily be moved from one desktop to another one. And with bulletin board you can start applications on the desktop you want and play multimedia files.
But in the last time I've sometimes a problem: When I restart the computer from standby and I touch the lower screen the cursor appears in the higher screen. I think that the problem is linked to the bulletin board. I've no good solution for the problem. I close the computer and restart it from standby and everything is fine again.
The w100 is a very good computer. The dual screen is very useful. I can always switch the keyboard to the screen where it doesn't hide important informations.
I can read big articles on two screens.
For programming it is very useful too. With the panning I can go through the program text in Delphi very fast. I can insert the text exactly at the place were is belongs without mouse movements. I can move parts of text very fast. ...and I can work in my bed! With the visual C++ express editor the panning doesn't work very well. But the scroll bars are very reactif if I double click them.
I like very much the bulletin board, but there are some bugs. It has much potential and could be a very rich platform for multimedia and social services. I can start directly my delphi projects from bulletin board with double click and open my browser from bulletin board directly at the right page.
I take pictures of the digital edition of my news paper on the bulletin board.
I'm waiting for the next upgrade of the bulletin board.

Partition failed with the error: No space left on device

I used Boot Camp Assistant (for instaling Windows XP) and there was Partition error:
+*The disc cannot be partioned because some files cannot be moved.*+
+Back up the disk and use Disk Utility to format it as a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistand again.+
so I tried Yasu, verified permission, verified disk, and everything was ok, but in Disk Utility I was trying to split or change size of my disk but there is one error again:
+*Partition failed.*+
+Partition failed with the error: No space left on device+
but I have 64GB free space!
how must I "+Restore your information to the disk+" or what else can I do?
thanks!

arajs wrote:
I used Boot Camp Assistant (for instaling Windows XP) and there was Partition error:
+*The disc cannot be partioned because some files cannot be moved.*+
+Back up the disk and use Disk Utility to format it as a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistand again.+
so I tried Yasu, verified permission, verified disk, and everything was ok, but in Disk Utility I was trying to split or change size of my disk but there is one error again:
+*Partition failed.*+
+Partition failed with the error: No space left on device+
but I have 64GB free space!
how must I "+Restore your information to the disk+" or what else can I do?
thanks!
This is a standard error message.
If you would have checked into the bootcamp forum you would have instantly found the solution.
http://discussions.apple.com/forum.jspa?forumID=1244&start=0
All that error message means is that you do not have enough conguous disk space available. No big deal at all for an older system. You have bits of files strewn over the "free space."
The solution as you would find in the bootcamp forum is to clone your HD, using a file-file clone, then test the clone to be sure it is working and then to erase your HD and clone back.
Works every time.
Message was edited by: Theodore

Using Keynote as community bulletin board- Can you overlay weather conditions?

We want to set up a Mac Mini running Keynote 09 to use as our community TV station's bulletin board to run when we are off-air.
Our old system software was only made for this purpose, so it could bring in (and overlay all the slides) with our local weather temps, etc. via our weather equipment on our roof.
Is there a way do to this within Keynote while it is playing overnight?
Thanks!
Ken Goldenberg

We want to set up a Mac Mini running Keynote 09 to use as our community TV station's bulletin board to run when we are off-air.
Our old system software was only made for this purpose, so it could bring in (and overlay all the slides) with our local weather temps, etc. via our weather equipment on our roof.
Is there a way do to this within Keynote while it is playing overnight?
Thanks!
Ken Goldenberg

***PLEASE REPLY***problem with toshiba bulletin board

Hi...
I posted a thread ...and for five days no one reply to me ?
please help me with this:
The icons in toshiba bulletin board program disappear ??
I uninstall it but it's same
you can see it:
http://yfrog.com/4rproblemep
my regards

you actually need to put back the icons dragging them back to the bulletin.
Toshiba Bulletin Board
oOo
*Read EULA before installing any software.
√

JDeveloper Error: White spaces are required between publicId and systemId.

I'm using JDeveloper 10.1.3.1.0.
This error is occurring in a BPEL process project.
With one particular web service I have, adding a Partner Link to the BPEL generates the following compile error:
Error: White spaces are required between publicId and systemId.
I can add Partner links from other web services and the BPEL will compile fine. The main difference I can see is that this web service supports WS-Addressing.
I have found one other reference to a similar (but not exactly the same) problem elsewhere in these forums but the fix is not really applicable. All of the wsdl files pass the "Validate WSDL" operation, and I don't see anything wrong with them.
When the error occurs and I select "Go To Source" it points back to the first line of the bpel file.
Can anyone help me out on this?
This is the wsdl for the web service, wsademo.wsdl:
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="wsademo"
targetNamespace="http://localhost:11001/wsademo.wsdl"
xmlns:tns="http://localhost:11001/wsademo.wsdl"
xmlns:SOAP-ENV="http://www.w3.org/2003/05/soap-envelope"
xmlns:SOAP-ENC="http://www.w3.org/2003/05/soap-encoding"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing"
xmlns:ns="http://localhost:11001/wsademo.wsdl"
xmlns:SOAP="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:MIME="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:DIME="http://schemas.xmlsoap.org/ws/2002/04/dime/wsdl/"
xmlns:WSDL="http://schemas.xmlsoap.org/wsdl/"
xmlns="http://schemas.xmlsoap.org/wsdl/">
<types>
<schema targetNamespace="http://localhost:11001/wsademo.wsdl"
xmlns:SOAP-ENV="http://www.w3.org/2003/05/soap-envelope"
xmlns:SOAP-ENC="http://www.w3.org/2003/05/soap-encoding"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing"
xmlns:ns="http://localhost:11001/wsademo.wsdl"
xmlns="http://www.w3.org/2001/XMLSchema"
elementFormDefault="unqualified"
attributeFormDefault="unqualified">
<import namespace="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<import namespace="http://www.w3.org/2003/05/soap-encoding"/>

<element name="wsademoResult">
<complexType>
<sequence>
<element name="out" type="xsd:string" minOccurs="0" maxOccurs="1" nillable="true"/>
</sequence>
</complexType>
</element>

<element name="wsademo">
<complexType>
<sequence>
<element name="in" type="xsd:string" minOccurs="0" maxOccurs="1" nillable="true"/>
</sequence>
</complexType>
</element>

<element name="wsademoResult">
<complexType>
<sequence>
<element name="out" type="xsd:string" minOccurs="0" maxOccurs="1" nillable="true"/>
</sequence>
</complexType>
</element>
</schema>
</types>
<message name="wsademoResult">
<part name="parameters" element="ns:wsademoResult"/>
</message>
<message name="wsademo">
<part name="parameters" element="ns:wsademo"/>
</message>
<message name="wsademoResult">
<part name="parameters" element="ns:wsademoResult"/>
</message>
<message name="wsademoHeader">
<part name="MessageID" element="wsa:MessageID"/>
<part name="RelatesTo" element="wsa:RelatesTo"/>
<part name="From" element="wsa:From"/>
<part name="ReplyTo" element="wsa:ReplyTo"/>
<part name="FaultTo" element="wsa:FaultTo"/>
<part name="To" element="wsa:To"/>
<part name="Action" element="wsa:Action"/>
</message>
<portType name="wsademoPort">
<operation name="wsademoResult">
<documentation>accepts a string value from a relayed response</documentation>
<input message="tns:wsademoResult"/>
</operation>
<operation name="wsademo">
<documentation>echos a string value and relays the response to the wsa replyTo address (if present)</documentation>
<input message="tns:wsademo"/>
<output message="tns:wsademoResult"/>
</operation>
</portType>
<binding name="wsademo" type="tns:wsademoPort">
<SOAP:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="wsademoResult">
<SOAP:operation soapAction="urn:wsademo/wsademoPort/wsademoResult"/>
<input>
<SOAP:body parts="parameters" use="literal"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="Action"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="To"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="FaultTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="ReplyTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="From"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="RelatesTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="MessageID"/>
</input>
</operation>
<operation name="wsademo">
<SOAP:operation soapAction="urn:wsademo/wsademoPort/wsademo"/>
<input>
<SOAP:body parts="parameters" use="literal"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="Action"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="To"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="FaultTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="ReplyTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="From"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="RelatesTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="MessageID"/>
</input>
<output>
<SOAP:body parts="parameters" use="literal"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="Action"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="To"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="FaultTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="ReplyTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="From"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="RelatesTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="MessageID"/>
</output>
</operation>
</binding>
<service name="wsademo">
<documentation>demonstrates WS-Addressing capabilities</documentation>
<port name="wsademo" binding="tns:wsademo">
<SOAP:address location="http://localhost:11001"/>
</port>
</service>
</definitions>
This is the wsdl that is generated by JDeveloper that contains the PartnerLinks and refernce back to the original wsdl file, wsademoRef.wsdl:
<definitions
name="wsademo"
targetNamespace="http://localhost:11001/wsademo.wsdl"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://localhost:11001/wsademo.wsdl"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
>
<import namespace="http://localhost:11001/wsademo.wsdl" location="wsademo.wsdl"/>
<plnk:partnerLinkType name="wsademoPort_PL">
<plnk:role name="wsademoPort_Role">
<plnk:portType name="tns:wsademoPort"/>
</plnk:role>
</plnk:partnerLinkType>
</definitions>
And finally the is the BPEL, WSAtest3.bpel:
<?xml version="1.0" encoding="UTF-8"?>

<process name="WsaTest3" targetNamespace="http://xmlns.oracle.com/WsaTest3"
xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:ns1="http://localhost:11001/wsademo.wsdl"
xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:ns2="http://localhost:80/Service.wsdl"
xmlns:client="http://xmlns.oracle.com/WsaTest3"
xmlns:bpelx="http://schemas.oracle.com/bpel/extension/"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc">

<partnerLinks>

<partnerLink name="client" partnerLinkType="client:WsaTest3"
myRole="WsaTest3Provider"/>
<partnerLink name="wsademo" partnerLinkType="ns1:wsademoPort_PL"
myRole="wsademoPort_Role" partnerRole="wsademoPort_Role"/>
</partnerLinks>

<variables>

<variable name="inputVariable" messageType="client:WsaTest3RequestMessage"/>

<variable name="outputVariable"
messageType="client:WsaTest3ResponseMessage"/>
<variable name="Invoke_1_wsademo_InputVariable" messageType="ns1:wsademo"/>
<variable name="Invoke_1_wsademo_OutputVariable"
messageType="ns1:wsademoResult"/>
</variables>

<sequence name="main">

<receive name="receiveInput" partnerLink="client" portType="client:WsaTest3"
operation="process" variable="inputVariable" createInstance="yes"/>

<assign name="Assign_1">
<copy>
<from variable="inputVariable" part="payload"
query="/client:WsaTest3ProcessRequest/client:input"/>
<to variable="Invoke_1_wsademo_InputVariable" part="parameters"/>
</copy>
</assign>
<invoke name="Invoke_1" partnerLink="wsademo" portType="ns1:wsademoPort"
operation="wsademo" inputVariable="Invoke_1_wsademo_InputVariable"
outputVariable="Invoke_1_wsademo_OutputVariable"/>
<assign name="Assign_2">
<copy>
<from variable="Invoke_1_wsademo_OutputVariable" part="parameters"/>
<to variable="outputVariable" part="payload"
query="/client:WsaTest3ProcessResponse/client:result"/>
</copy>
</assign>
<reply name="replyOutput" partnerLink="client" portType="client:WsaTest3"
operation="process" variable="outputVariable"/>
</sequence>
</process>
-Wayne Stielau
Open Text Corporation
Irvine, CA

I have discovered two issues.
1. JDeveloper does not seem to like the SOAP 1.2 envelope and encoding namespaces. Is this a known limitation? Changed them to 1.1.
2. JDeveloper does not like the double definition of wsaDemoResult.
When these two items are changed, the bpel compiles clean. Now I've got to get the message header to populate correctly. There are no values assigned, only namespace definitions. This is the SOAP packet that is received at the web service.
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<env:Header>
<MessageID xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<From xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<RelatesTo xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<Action xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<ReplyTo xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<To xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<FaultTo xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
</env:Header>
<env:Body>
<wsademo xmlns="http://localhost:11001/wsademo.wsdl">
<in xmlns="">hello</in>
</wsademo>
</env:Body>
</env:Envelope>

Bulletin Board for A505-6980

Does anyone know how to find the Bulletin Board on a A505-6980? The advertisement for this machine says that the Bulletin Board in available on this machine but I cannot find in on the computer.

Satellite A505-S6980
Mystery to me. I don't see anything about it in the specs above.
And I don't see anything in the User's Guide.
Satellite A500 Series User’s Guide
More about it here.
Toshiba Bulletin Board
Let us know if you figure this one out.
-Jerry

1122: ERROR: No space in Bulletin Board

Similar Messages

Maybe you are looking for