1130 AP keeps rebooting cannot find WLC

Device WLC 2000( with the new IOS AIR-WLC2006-K9-4-0-206-0.aes) and AP 1130.
First time when i power on AP1130, WLC is able to detect it and wireless is working fine
WLC will automatically upgrade the IOS of 1130AP to c1130-k9w7-tar.123-11.JA1.tar
but once I power off and on the device ,AP1130 will keep rebooting.
WLC cannot see it , it order to make it working again i need to console to AP1130 and erase all the config and ios .
Any idea how to solve this ?

Thanks for everyone's help on this issue. The problem was the wiring in the cieling. When I tested out the wire I tested for Connectivity and not loss of power. One of the contractor's but a small slice in the wire undectable by looking at it. When I replaced the wire the AP then became stable and is no longer rebooting. Thanks

Similar Messages

I cannot purchase in game, it keeps saying cannot find your Apple ID, but works fine in apple store download

We'll, I recently get a new phone, and I used my old phones back ups. And now I can not purchase in game with my Apple ID, it keep saying " cannot find your Apple ID or wrong password" but I can still purchase in Apple store
And it works just fine in the old phone

There are a lot of reports of people having this problem (including me). The Apple iTunes store has been having other issues as well (some speculate it might be related to the recent Lion release).
You could open a case with Apple, or you could just wait it out. I'm sure Apple is in the process of fixing it since this seems to be hitting a lot of users.

AP1252AG keep rebooting, cannot go to ROMMON mode

Hi,
We have an AP1252AG that keep rebooting and couldn't load IOS image:
IOS Bootloader - Starting system.
Xmodem file system is available.
flashfs[0]: 151 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31868928
flashfs[0]: Bytes used: 6368768
flashfs[0]: Bytes available: 25500160
flashfs[0]: flashfs fsck took 16 seconds.
Reading cookie from flash parameter block...done.
Base Ethernet MAC address: 00:1b:d5:13:37:e6
IOS Bootloader - Starting system.
Xmodem file system is available.
flashfs[0]: 151 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31868928
flashfs[0]: Bytes used: 6368768
flashfs[0]: Bytes available: 25500160
flashfs[0]: flashfs fsck took 16 seconds.
Reading cookie from flash parameter block...done.
Base Ethernet MAC address: 00:1b:d5:13:37:e6
IOS Bootloader - Starting system.
Xmodem file system is available.
flashfs[0]: 151 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31868928
flashfs[0]: Bytes used: 6368768
flashfs[0]: Bytes available: 25500160
flashfs[0]: flashfs fsck took 16 seconds.
Reading cookie from flash parameter block...done.
Base Ethernet MAC address: 00:1b:d5:13:37:e6
If we try to reset with the mode button but still doesn't help:
IOS Bootloader - Starting system.
Xmodem file system is available.
flashfs[0]: 151 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31868928
flashfs[0]: Bytes used: 6368768
flashfs[0]: Bytes available: 25500160
flashfs[0]: flashfs fsck took 17 seconds.
Reading cookie from flash parameter block...done.
Base Ethernet MAC address: 00:1b:d5:13:37:e6
button pressed for 11 seconds
process_config_recovery: set IP address and config to defÿ
IOS Bootloader - Starting system.
Xmodem file system is available.
flashfs[0]: 151 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31868928
flashfs[0]: Bytes used: 6368768
flashfs[0]: Bytes available: 25500160
flashfs[0]: flashfs fsck took 16 seconds.
Reading cookie from flash parameter block...done.
Base Ethernet MAC address: 00:1b:d5:13:37:e6
Is there anyway we can still recover this AP?
Thanks

I think your AP is dead. My recommendation is to RMA the AP and you could get a free upgrade to a AP1260.

HP Photosmart D110 won't connect. Keeps saying cannot find printer

I'm sorry if someone have posted this before but I don't know how to explain my problem. The printer was working fine the first few weeks we got it and now, it's becoming a hassle especially when I need to print review sheets for class in the morning and the printer won't print.
First, the printer is always offline. I go to Device Manager to re-enable it and it stil says it's offline, but sometimes come back after I restart the computer. This is a hassle to have to restart the computer every time but it never used to do that until recently.
Then, after all that, it still won't print. The documents pend but won't print. I got so irritated I uninstalled the drivers because I thought I might've downloaded the wrong one. The HP website has D110 a and D110 b, why it's like that, I am not sure, but the fact that I downloaded both and they are the same file name, sort of makes me think that they are the same drivers.
Now when I install either driver, and it gets to the part where it asks you to check the IP on the printer, every time I enter the IP, it keeps saying it can't find my printer when it IS the right IP address. I even printed that network page just to make sure I wasn't typing the numbers wrong.
Now I am stick with no printer to use and I'm really frustrated.. because I thought wireless printers were supposed to just work, not give so many problems.
Sorry if I seem angry, but today, I was supposed to be studying all day, instead, I wasted an hour trying to figure this out and came up with no solutions so far.
Thank you!
Windows 7 Home Premium 64-bit

I'm having the same issue with windows 7 on a dell laptop. I'm using the printer wirelessly and have lost connection and have had to reinstall the driver multiple times. I get the printer is offline message and cannot print to it. At the same time, I can access the print on my mac and there are no issues with printing or scanning. Is there a driver update for windows 7 that will fix this issue?

ITune keeps saying cannot find my CD song names to import

Folks,
I think that there is a bug in iTune for the Mac or something... I just got the MacBook Pro with Retina Display. This is my first Mac. I am now adding some CDs to my iTune library. I am using the Apple USB Superdrive. But every time I put in a CD, iTune will keep saying that "The song names for this CD could not be found online. Do you still want to import the songs?" message. Then I will eject the CD a few times enough and one of the inserts will make iTune to query the Gracenotes database to retrieve the CD and it will import it then. But I have to do this all over again when I put another CD into it. I never have this issue on the Windows version of iTune. I have also tried another USB DVD Drive and iTune behaves the same way. So I am pretty sure that this is an iTune issue. I have tried both wired and wireless network and the behavior is the same. It is very annoying....
So does anyone experience this issue with iTune? I have done some googling and I haven't found anything that shows my issue.
Any input will be greatly appreciated. Thanks.

I am on iTunes 10 for Windows and have a similar issue. I haven't tried inserting the CD multiple times but will. It is frustrating that Apple has not official stance on this, or at least that I can find. My research shows this issue back to 2007. I have not found a single concrete fix or a reply from Apple Support directly. I understand the software is free but a continual problem should be looked into. I don't think I would jump from Windows to Mac based on this experience alone. Does Apple support other applications better than this? I see no replies to you and you have purchased a MacBook so I expect the answer is no.
I have tried removing all traces of iTunes / Apple software, multiple reboots, multiple CDs, rebuilding my library, disabling my A / V software and no success. I decided to try importing CDs to use my iPod but gather that purchase was a mistake. Sorry Apple, no fan here - definitely not thinking about iPhone / iPad for Christmas. I'll look at the Google Chromebook instead.

1130 AP keeps rebooting

I currently have a WLC 2006 with 6 AP's. 5 of my AP's are stable but one AP will reboot every 3 to 4 mins.The bad AP will show up in the WLC and I can connect to this AP but then disappers once it reboots. I have tired plugging the bad AP into a switchport running one of the good AP's but it still reboots. I have replaced the 1130AP but still same problem. The cable running to the AP has been tested. I have also made sure that there no Rogue AP's on my network. On the switch it just says port goes up and then down. The AP doesn't show anything in logs as to why it reboots.The WLC has also been replaced as well. I'm currently working with a TAC Enginner but he is perplexed as well. The verison of IOS that I'm running is 4.0.207.0 which I got from TAC. What I'm hoping is someone else has seen this problem or has some suggestion to fix this problem. Thanks in advance for your help.

Thanks for everyone's help on this issue. The problem was the wiring in the cieling. When I tested out the wire I tested for Connectivity and not loss of power. One of the contractor's but a small slice in the wire undectable by looking at it. When I replaced the wire the AP then became stable and is no longer rebooting. Thanks

WRT330N keeps rebooting. cannot stay conected

I was just setting up some mac filtering with the router and then I lost connection. I looked at the router and the internet, wireless, and security lights were out and the 4 ports flashed. Then the router rebooted. Once it starts doing that I cannot do anything to the router. I had to unplug it and let it sit for a while. Then I was able to get in and within a couple mins it started all over again. The router has been unplugged for about 4 hours and it has stayed online for about 15 mins now. I was finally able to get the firmware update to take. Should this fix that problem? I remember seeing someone else posting about this on Newegg I think. Has anyone else had this problem. I will leave it up and see if it stays before I start to configure it again.

P2P = peer-to-peer networking, commonly used to share music, data files, etc. It includes programs such as BitTorrent.
After you upgraded the firmware, did you reset the router to factory defaults? If not, reset the router to factory defaults, then set up the router from scratch. If you saved a router configuration file, DO NOT use it.
Message Edited by toomanydonuts on 04-25-200701:58 AM
Message Edited by toomanydonuts on 04-25-200701:59 AM

I keep getting "cannot find 'file///c:/programdata//oberon%20media/#######/#########/loading.htm' Make sure path is correct. How do I fix this?

I can get some games to work by going directly through to the Programs directory, but others don't work.
The final error I get is "navigation to the webpage was cancelled". The game provider says it is a firewall issue. I've tried disabling firewalls, even deleting, and it does not seem to help.

Didn't work. Still get the same error messages.

Can't get flash buttons to work...'Cannot find path' Flash MX 2004

I am trying to get the flash buttons for my website to work, but every time I do the getURL thing it keeps saying 'Cannot find (directory)'. The website is offline and I'm using Macromedia Flash MX 2004, I also might be able to use Flash 8 but these are the only two versions I have access to.
The action script for the button is:
on(release){
getURL("..\****\****\(Website directory)\(sub directory)\(Website page).html")
I am making the website in Dreamweaver 8 and this is really holding me back as it's nearly finished but the buttons still don't work.
Thanks in advance.

Hi,
Sorry I should have mentioned tha. The structure is as follows:
Website name\
                     \Animations
                     \Audio
                     \Buttons
                     \Images
                     \Scripts
                     \Templates
                     \Videos
The buttons are contained in the buttons folder and the page I want to link it to is in the templates folder. I have tried putting the button flash file in the website root directory and trying that but it didn't work.
Hope this helps.
Thanks in advance.

Cannot find server error trying to download Migration Workbench

I've been trying to download OMWB for the last 4 days, from Oracle Migration Workbench Downloads / Release 9.2.0.1.2 for Microsoft Windows 98/NT/2000/XP page.
Keep getting 'Cannot find server' and 'Page cannot be displayed' errors in Internet Explorer.
Is this the correct URL:
http://download.oracle.com/otn/nt/omwb/92012/omwb_92012.exe
I downloaded and used the previous version of OMWB. Was very satisfied with it. Unfortunately, I had to rebuild my hard drive and lost OMWB.

I suggest that you retry, maybe there was some network glitches... If you follow the links from OTN you should be able to download no problems. Did you try the split downloads as an alternative?
Donal

5230 ovi suite cannot find maps on device

new nokia 5230 and have been trying to upload maps to phone for hours, £30 credit wasted for internet connection and ovi suite keep saying cannot find maps or voice guidance files in your device. Did deleting cities folder and qf file still the same; tried to use pc suite as someone suggested but the link tells me to use ovi suite as well. No map at all in phone Please any suggestions???

Hi Mkws,
To find the installed Maps and Navigation.
Connect your device to the Pc/Laptop
Open your OVi Suite, Goto --> View -> Go to -> Maps. On the left handside bottom you can find On your device, Below that select All. It will take a while to read your phone data. It will show you the Maps and the Voice Navigation installed in your device.
Please delete all your maps which ever already installed in your device by clicking on Delete All on your right hand side top.
Now you can download and install the maps and voice navigations once again one by one.
Before this if you find any update for your maps software please go ahead and do it, prior to downloading Maps.
Hope This will resolve the issue.
Regards
Regards,
Diwa
If you like my post, kindly acknowlege the same by giving a kudos to me

Desktop/Finder keeps rebooting after upgraded to Maverick (mac mini hooked up to a home theater system)

My desktop keeps rebooting ever since I upgraded to Mavericks.
Current setup, Mac Mini hooked up to home theater (Panasonic SC-HTB20) that is then hooked up to my Panasonic Plasma TV.
I usually leave my Mac Mini on running and at least once a day when I turn on the TV I can see that my desktop was rebooted. Firefox and Chrome will say that it wasn't shut down properly and if I want to restore my previous session. Also some times when I switched the input to watch TV and switch back, all my windows will be scattered out of place. For example Chrome will be in the top left hand corner to the point that it's almost minimized and I wouldn't be able to move it as well. Only thing I can do is close out these applications and relaunch them. It doesn't appear that the OS actually crashed, but more like the desktop/finder itself crashed. Cause once in a while I will switch back or turn on the TV and the screen will stay black for a few minutes then I'll see the cursor in the top right hand corner. After that I will start to see the desktop and my application start loading. It doesn't go through the regular process of rebooting where you see the Apple logo so I don't think the OS actually crashed but I could be wrong.
For some reason it seems like Maverick doesn't like the home theater system. An almost guarantee way to reproduce the issue is to wait for the home theater to turn off after it's been inactive for a while. If I turn it on the home theater to have the audio coming from it I will see the desktop goes black immediately then the whole desktop reboot process I mentioned above will kick in.
Never had any of these issues on 10.7 before I upgraded to Maverick.
Anybody have any suggestion? I really don't want to format and downgrade back to 10.7.
Thanks

Sounds like a kernel panic.
If you post the report we could have a go at deciphering it.
It would be in /Library/Logs/Diagnostic Reports.

Every time I ask Siri to find something near me, she says that she cannot find my location, and to turn on my location settings and siri settings. These are both on and after rebooting it still doesn't work. How do I fix this?

Every time I ask Siri to find something near me, she says that she cannot find my location because I need to turn on location services in the settings menu and in siri. These are both on, and after rebooting my phone it still doesn't work correctly. How do I fix this?

No, the app does not have to completely restart. It gets shifted in its open state into storage. Similar to how a computer uses the hard disk when it has insufficient memory.
What complicates things is that sometimes memory does not get returned for reuse when you close an app. Thus yo should periodically double click the Home button and "delete" unnecessary apps from the multitasking dock and power off and then back on the iPod.

I keep getting the message, "Windows cannot find 'c:\Program Files (x86)\Mozilla Firefox\firefox.exe'. Make sure you typed the name correctly, and then try again." I get it when I either try to open it from the Start menu or from the desktop icon.

I've just installed Firefox on my laptop and keep getting the message, "Windows cannot find 'c:\Program Files (x86)\Mozilla Firefox\firefox.exe'. Make sure you typed the name correctly, and then try again." I get this message whenever I either try to open it from the Start menu or from the desktop icon. I've never gotten it to work and even uninstalled it and then redownloaded it and still cannot get it to open. Any help would be greatly appreciated!!!!

Are you installing from the official site? http://www.mozilla.com/firefox
If you use Windows Explorer (My Computer) to check that path, is the Mozilla Firefox folder there? That is the normal installation location, but I think it's worth checking.
If the folder isn't there or firefox.exe is not in it, I wonder whether some other software might be interfering. You might want to run some supplemental security scans. These two tools are highly regarded:
Malwarebytes Anti-malware : http://www.malwarebytes.org/products/malwarebytes_free
SUPERAntiSpyware : http://www.superantispyware.com/

I keep getting notices from Firefox (Firefox emblem in the popup) that "Joe Smith has Unfriended" me. I cannot find this app in Firefox to remove it. Mac OS

Firefox 28.0 Mac OS 10.9.2
I keep getting small pop-up notices from Firefox (Firefox emblem in the pop-up), telling me that "Joe Smith [insert name of one of my Facebook friends there] has Unfriended you." It only stays on the screen for a few seconds and disappears.
Oddly, none of these people have actually unfriended me in Facebook. Facebook does not send Unfriend notices. I know there is an app for Firefox that does this, but I cannot find any trace of it in my Firefox Applications list and I do not recall installing it. Nothing with "Facebook" or "Unfriend" in my Firefox app list. (Someone else in the household may have installed it, but they are not talking. ;)
I searched my hard drive for "unfriend" and "Unfriend" and found nothing.
At this point, it is an annoyance, but it bothers me that something like this could become malicious.
Any help would be greatly appreciated. Thanks for your time.

You have an add-on called Lost Friends Notifier. That seems like the likely culprit. Try removing it from the Add-ons Manager, Extensions category.
* [[Disable or remove Add-ons]]

1130 AP keeps rebooting cannot find WLC

Similar Messages

Maybe you are looking for