1130 bridge password issue

Hi guys,
hope someone can shed some light on an issue I have.
We have a pair of 1130 bridges, fully configured up and running.
Had to move it from one site to another with different password requirements: all good as I have the original passwords. changed the enable password no problem, but cannot for the life of me find where to change the initial console password.
It doesnt seem to have a user associated with it and nothing I try seems to make a blind bit of difference to this initial one: forclairty it is this one:
Press RETURN to get started.
User Access Verification
Password:
where is this set? have tried through console and GUI to no avail.

Hi Andy ,
If you are asking how to config the password on the console its like this
AP(config)#line console 0
AP(config-line)# password admin1
AP(config-line)# login
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin

Similar Messages

  • Upgraded to yosemite and now having password issues and slow start up

    I have upgraded my macbook pro to the OS X Yosemite operating system and now encountering start up and password issues.
    Previously on start up my system would go to the log on icon within 10 to 15 seconds of pushing the on button. Now there is horizontal loading indicator bar appearing and takes about 30seconds to 1 minute to go away before getting to the log on screen and if I click on my icon the system goes live on screen without having to put in a password which is an obvious security issue.
    I have tried adding a password however each time I try to put my old password in it tells me it is the wrong one.
    I am operating Yosemite 10.10.2 on a macbook pro with 8gb memory with i7 processor..
    The computer was running perfectly ok before this up grade so I had resisted previous prompts to upgrade due to the bad press this system was getting last year. I thought Apple would have had this all sorted by now??
    I  would appreciate any help if anyone knows how to resolve these issues.

    Install the version of Java they want from here: Java for OS X 2014-001
    See if CS 5.1 launches.
    If not reinstall CS5.1 and any updates.
    Gene

  • Cisco Server VCS C220 M3 Server BIOS password issue

    We have a Cisco Server VCS C220 M3 Server BIOS password issue.
    We needed to turn on Bit locker in the Cisco Server VCS C220. To do this we needed to create an administrator password for the BIOS to turn on trusted Platform Module (TPM). After we set up the administrator password and turn on Security for TPM. We were prompted for the administrator password. It would not let us log in with the administrator password that we created for the BIOS. In the next few days we received a BIOS is corrupted screen (BIOS Flash Image Corrupted *****).We follow procedures to recover the BIOS with the USB stick with recovery .cap file in the root folder. We tried reseating the jumper pg. 35 of the Cisco Server VCS C220 M3 Server of the Installation and Service Guide.
    http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C220/install/C220.pdf
    We were able to bring up the server, but we are still not able to get pass the Admin password issue. We tried to clear the CMOS header with Header J37 page 2-18 but we had no success with clearing out the password prompt. Figure 2-6 Service Header Locations shows the J41 BIOS RCVR boot and J37 Clear CMOS.
    Can anyone provide us documentation of where the pins are located on the motherboard to clear the BIOS password? We are looking for more of a detail picture of the pins please. The documentation is only showing a basic diagram of the header locations.

    You need to look at the CUCM logs for further info on what might have happened, and to make sure your servers are fit for the amount of users, devices, etc. you have in your environment.

  • Can't install due to password issue

    I've reset the password 3X and still can't download due to password issue. Help!

    This password prompt is presented by your operating system, and is intended to keep you from accidentally installing software.
    If this is your personal machine and you don't need a password to log into the computer when it first starts up, you can probably leave the password blank and click OK to get past this prompt.  If this is your personal machine and your normal password isn't working, check to make sure that CAPS LOCK is off, and type the password carefully.
    If this is your work machine and it's asking for an Administrator password, well, you'll need to have a conversation with your friendly IT person.
    If you're still stumped, you may need to reset the password on your Mac:
    http://support.apple.com/kb/PH18653
    http://support.apple.com/kb/PH14325
    http://support.apple.com/en-us/HT201240

  • Upgraded to Leopard now password issue

    OK I upgraded to Leopard on my G5 and cant log in with my password . I have read this forum and tried some of the related password issues when upgrading to Leopard . I can only log on when I use the root password I created , I think that the main issue with this is in the keychain . How do I disable the whole log in password so That when I turn the computer on it just boots up with out a password as it did before I did the upgrade .
    Thanks Mike...

    You can use the Leopard upgrade disc to reset the passwords. Follow the instructions here:
    http://support.apple.com/kb/HT1274
    To start up in a user account rather than with a login, go to System Preferences -> Accounts. You should be able to change the pull-down menu next to "Automatic Login" to be one of the users or the administrator. This will require you to unlock the little lock and enter your password--which you may need to reset as noted above. Good luck!

  • Email password issues

    Why am i having email password issues? This is the email from [email protected] "Your account (email) could not be authenticated. If you have recently changed your email password, please enter the most current password in settings to continue receiving emails. You can enter the password 100 times a day and still will not receive emails.
    Anyone have an answer?

    Delete and re-add the account.  I just had the same thing happen, and that fixed it.  I think it was some error on Verizon's end.

  • Password issues with my playbook

    Hello,
    i am a new member trying to get help for recent password issues with my playbook

    Is this about exactly the same issue as you just posted about in this thread?
    If so, please click on "Accept as Solution" next to my answer, and we can keep the discussion in that other thread (where you've posted more detail than you did here).
    Peter Hansen -- (BB10 and dev-related blog posts at http://peterhansen.ca.)
    Author of White Noise and Battery Guru for BB10 and for PlayBook | Get more from your battery!

  • IPhone 3G Will Not Connect To Home Wi Fi Password Issue

    I discovered a solution to a password issue that I did not find a solution to here.  I am posting it for karmic equity.
    I have a brand new CISCO N wireless router set for WEP.  I did not have security on my old router.
    When I tried to join my secure wireless network, iPhone 3G would not accept/ recognize my new network password ("Unable to join the network ....").  Even I entered the correct "password" I could not get on the network.  I could join onto the network as "guest" using my password but only as guest, and I had to go through the Safari browser,  Wi-Fi Networks, Choose a Network.... would NOT work as guest
    To connect iPhone to the password secured network (and it will automatically join in the future:
    GOTO Settings
    GOTO Wi-Fi Networks
    GOTO Other Network
    Enter name of your network
    GOTO Security
    Select your security (mine is WEP)
    GOBACKTO  Other Network
    PASSWORD:  !!!! Not my "network" password!!!!   Its actually my "wireless key" which is like 8476G29765.  CISCO refered to it as the "PASSPHRASE".  My password only gets me into the router, or connected as "Guest" but not connected to the network.
    Note please that I could long onto the network as "guest" using my password, that was something like "password".  Again, to log onto the network I had to use the kryptic "8476G29765" passphrase that my router generated, but I entered it in SETTINGS / WiFi Networks/ Other Network....
    Other methods may work as well, I dont know, but this worked like a charm.

    Try restarting your WiFi routers by removing power for 30 seconds. Note that WiFi is not automatically fine just because some devices may be working with it.
    On your iPad use Settings > General > Reset > Reset network settings
    Try to connect.

  • Possible solution to wi-fi password issues in OS X Lion

    Firstly, thank you for taking the time to read this forum post.
    In this post, I shall be outlining the possible solution to the wi-fi password issues that have surfaced in Lion, and will no doubt be fixed by Apple in an coming update. This is sort of a temporary thing that I found to work.
    To backtrack in regards to the previous operating system, Snow Leopard, if you wanted to password protect your Wifi connection for example, in regards to sharing the internet connection between, for example, between your Mac and your Ipad, you were able to go into Sharing, Internet Sharing and click on Airport options and set a password.
    For the moment this appears to be absent.
    Instead, you now have to click on Wi-fi options and what now appears is something along the lines of asking to input a ASCII/HEX password.
    At first this seems puzzling and at first, I reinstalled Snow Leopard due to this obvious ommision in regards to the previous method, and like everybody else has said, Internet Sharing worked perefectly well in Snow Leopard.
    However, I decided to install Lion once again and try to figure out a solution and as such, I came across this website
    http://www.andrewscompanies.com/tools/wep.asp
    What the above website allows you to do is get a WEP key, which can be used in the Wi-fi options settings within Internet Sharing.
    You simply click on the middle option on the webpage (which I did), to select 128bit key and copy and paste the HEX key, which appears under the section marked Generated Keys, into the password input section of Wi-fi options
    This is where another problem arises. If you are sharing the internet connection between your Mac and your Ipad for example, the following steps need to be taken in order for this connection sharing to work
    1.When you boot up your Mac, go to System Prefrences, Sharing, untick and tick the Internet Sharing checkbox and click Start on the dialog that appears.
    2.Now on your Ipad, go to the Wi-fi tab, find your wireless network and click on the arrow next to it, click on Forget this network, go back to the Wi-fi screen again and tap on your Wi-fi network once again. It will now ask for your password. TYPE IN THE KEY. The connection between the Mac and the Ipad is established.
    THE ABOVE STEPS WILL NEED TO BE DONE IF YOU TURN YOUR MAC OFF AND TURN IT BACK ON AGAIN.
    As I've said previously, this should be a good temporary solution until Apple comes out with an update that can solve this issue
    Thank you for your time

    Had the same problem (random WiFi disconnects), but AppleCare solved it.
    Delete Macintosh HD/Library/Preferences/SystemConfiguration.
    You'll have to reconnect WiFi, but pswd etc should still be there.

  • Password issue after 10.8.4 update

    I've got a password issue that started a couple hours after I applied the 10.8.4 update. My password isn't always accepted to wake from sleep. It's inconsistent, and a hard boot solves it for a bit but it's happened 4 times now in the last 48 hours. Any ideas?

    The next time you have the problem, note the exact time: hour, minute, second.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • G550 Supervisor Password Issue

    I have an issue with G550........manual states a new board is required if you forget the supervisor password. My issue is not forgetting password, but changing it back to "nothing."
    My teenage daughter attempted to bypass my windows admin password by changing supervisor password to Thane13. When she could still not access my system, she gave up. I went to reset the supervisor password to nothing. When prompted for password I typed in the Thane13. When asked for "New Password," I just entered through, setting it back to nothing, I thought. Now, I am locked out of machine!! I've tried everything I can think of, short of a hammer. Any assistance here?
    Solved!
    Go to Solution.

    as tanuj suggested, you need to contact support line. due to forum rules forbid to discuss password issue, i'm going to lock this thread.

  • How do I talk to a real person about my iPhone 5s ID/Password issues?

    How do I talk to a real person about my iPhone 5s ID/Password issues?

    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Apple - Support - Contact Apple Support.
    For Mac App Store: Apple - Support - Mac App Store.
    For iTunes: Apple - Support - iTunes.

  • Is the email password issue related to my canceled trial .mac account?

    Guys,
    I thought this might be something. My trial .mac account expired and I have been getting password issues ever since. I thought having a mac email account was indefinite, however after speaking with CS, they said an expired .mac account and password issues were correlated.
    So, for those with ongoing password issues, am I assuming these people who are having password issues have an *active* .mac account? Apologies for the newb/green question.
    P.S. I am able to retrieve gmail on my account.
    Message was edited by: jkim2001

    If you've got your .Mac account set up in Mail and the account has expired, that'd be why you're getting password prompts. .Mac email accounts expire with the account--they're not free. Remove the .Mac account from Mail (or pay for it) and the problem should go away.

  • HT1212 How can I back up my ipod when device is disabled due to password issue?

    How can I back up my ipod when device is disabled due to password issue?

    Once the Device is asking to be Restored with iTunes... it is too late to save anything...
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • New drive has password issues

    Hi world,
    I had to change my intel iMac hard drive.
    Luckily I had a back up, however on trying to open after copying the back up it appears the passwords don't work.
    It also won't accept a new password even with the master password entered (which it appears to accept and then prompts for a new password) 
    Any ideas?
    Thanks. SP

    hollyox1 wrote:
    ok call me thick but just looked at the dbase folders installed in my start menu and there is a universal installer there, I have clicked on that and it has come up with an error,
    OUI-10150:error:A runtime exception occurred while setting s_dlgCfgNamingLabelSIDnul in component Oracle Database 11g 11.2.0.1.0 Installation cannot continue for this component.
    then it asks to tick one of the boxes:
    Stop installation of all products or
    Stop installation of this component only.
    How do I fix this to continue with the installation.How this is related to the password issue? The password is case-sensitive in 11g so please check that you are using the correct password and it's in the correct case. If you can't remember the last password, issue the below command,
    sqlplus / as sysdba
    alter user sys identified by oracle;The first command would be required to run on the command-prompt.
    Aman....

Maybe you are looking for