1130 not connecting to controller after setting to HREAP

I had an 1130 AP connected to my 4402 controller running 4.2.207.  I went to set the AP to HREAP and after I applied the HREAP setting, the AP rebooted and will no longer connect to the controller.
This is the error message I am getting on the controller.
WARNING: invalid slot ID (255) passed to REAP -Traceback=
0x4F026C 0x4F0394 0x498B24 0x491DC4 0x4AAF90 0x48DAC4 0x48E35C 0x197630o REAP -Traceback=
The AP part number is AIR-LAP1131AG-A-K9.
This AP was up and running with no problem until I tried to change it to HREAP.
Any suggestions on how I can recover this AP?
Seth

I had reloaded the AP last night using c1130-k9w7-tar.124-10b.JDA3.tar renamed to C1130-k9w7-tar.default.  After the AP came up in Autonomous mode I then converted back to LWAPP using c1130-rcvk9w8-tar.124-21a.JA2.tar.  Once the AP joined the controller and got the image it then rebooted and came up with the same error.
So after reading your response I deced to rename c1130-rcvk9w8-tar.124-21a.JA2.tar to c1130-k9w7-tar.default and let the AP load this image.  After downloading the image the AP then joined the controller, got its image, then reloaded and succesfully joined.
Thank you for the help.
Seth

Similar Messages

  • Mac is not connecting to TV after using Mini DisplayPort to HDMI Adapter Cable?

    Macbook Pro is not connecting to TV after using Mini DisplayPort to HDMI Adapter Cable. 2010 Macbook Pro, just purchased Mini DisplayPort to HDMI Adapter Cable from Amazon. Link here: http://www.amazon.com/Mini_Dis-HDMI-CB6-Mini-DisplayPort-Adapter-Cable/dp/B003OC 6LWM/ref=sr_1_2?ie=UTF8&qid=1406238976&sr=8-2&keywords=mac+to+tv --When i connect both ends of the cable to the TV and to the laptop, the screen will blink, but then afterwards it will not mirror on the TV. I have tried going to display setting but cannot find the arrangements tab. When i searched "arrangements" a message said, "The Arrangement tab of Displays preferences is hidden because you only have a single display attached to this computer." Not sure how to fix this problem. I have connected this laptop to a TV before, but with a different cable other than the one i just purchased. Any help would be greatly appreciated, thanks.

    Found the fix.  Still don't know if it was Windows, iTunes, or Norton 360, but this worked immediately for me:
    +++++++++++++++++
    edgravel
    Re: iTunes Store Won't Load, Won't Show Error Message
       Aug 13, 2011 4:32 PM    (in response to Daedalme) 
    I found a solution posted from Rodfromnework for PC users. It worked for me and easy to do.
    Start --> Programs --> Accessories (Right Click on Command Prompt) --> Run as Administrator
    then type in:
    Netsh winsock reset
    Hit enter, restart PC, open iTunes, go to Store
    Hope it works for you too. 

  • My iPod will not connect to itunes after windows 8.1 download

    My iPOD will not connect to itunes after windows 8.1 download
    I already uninstall itunes and made sure there were no file left before I installed again (it didn't appear to be any files left but music I had on it before was still there when I reinstall it)
    My ipod does work on my old computer and it was working on windows 8 before I update to  8.1
    I don't want to installed again because I just did that and didn't work!
    I want to use my iPod on this computer and system.  Can this be fix?

    Hey TheBurntApple,
    Thanks for the question. I understand that you are experiencing issues with your iPhone connecting to iTunes for Windows. While you may have already attempted most of the steps in this article, I wished to provide it to you just in case something was omitted.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks,
    Matt M.

  • Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ???

    Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ?????????????????

    1st problem see http://kb.mozillazine.org/Firewalls
    2nd problem, to close Firefox properly use File > Exit
    :not with the [x] in upper right corner which close window
    :see http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit
    :if restarting use "Restartless Restart" extension as mentioned there.
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

  • Ipad2 could not connect to itunes after i restore

    ipad2 could not connect to itunes after i restore(newest iO7)

    Help in here.
    iOS: Device not recognized in iTunes for Windows
    Or in here.
    iOS: Device not recognized in iTunes for OS X - Apple Support
    Mac OS X v10.6: iOS device not recognized in iTunes after ...

  • Why may i not connect wifi mode after atualization? Only 3G is functioning!

    Why may i not connect wifi mode after atualization? Only 3G is available.

    Why may i not connect wifi mode after atualization? Only 3G is available.

  • IPOD NOT CONNECTING TO WIFI AFTER UPDATING TO IOS 8.1.3

    I recently updated my ipod touch to ios 8.1.3. after which it stopped connecting to my wifi device saying password is incorrect. Needless to say password was correct and other devices were connecting fine. I restarted device, tried connecting it with other wifi devices (it didnt connect to other devices either) , i reset network setting , erased all contents and reset setting and finally restored ipod to factory setting using itunes but problem is still persisting.. Now I have an ipod without wifi which is pretty useless. Need your help in this regard

    Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Airport does not connect fast enough after sleep on Mac OS X Snow Leopard

    Ever since installing Snow Leopard, I have noticed that my Airport will not connect fast enough when I am waking from sleep. I sometimes have to wait upwards of 30 seconds after waking from sleep so Airport can connect and I can begin using the Internet. I notice that Airport says it is connected, but when I launch Safari, I get the "Not Connected to Internet" error message. I have tried removing the com.apple.airport.preferences.plist file to no avail. I have also tried Archiving and Installing and the issue is still there. Any ideas or fixes? Thanks.

    Those seem to happen a lot when you have stealth mode enabled (Security System Prefs, Firewall, Advanced). For me, they all seemed to be innocuous so I turned it off. I don't think this would affect your connectivity, though.
    You should also see it negotiate the connection. Is there anything that looks like it is repeating or retrying or other disconcerting messages? Here's an example of mine waking:1/5/10 8:27:36 PM kernel Wake reason = USB1
    1/5/10 8:27:36 PM kernel System Wake
    1/5/10 8:27:36 PM kernel vmmon: powerStateDidChange flags=0x82 (state 4)
    1/5/10 8:27:36 PM kernel Previous Sleep Cause: 0
    1/5/10 8:27:36 PM kernel USB (UHCI):Port 2 on bus 0x1d has remote wakeup from some device
    1/5/10 8:27:36 PM kernel EIR is not supported.
    1/5/10 8:27:37 PM kernel en1: 802.11d country code set to 'US'.
    1/5/10 8:27:37 PM kernel en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 149 153 157 161 165
    1/5/10 8:27:38 PM kernel AirPort: Link Up on en1
    1/5/10 8:27:38 PM kernel AirPort: RSN handshake complete on en1
    1/5/10 8:27:38 PM configd[14] network configuration changed.

  • RE1000 Will Not Connect to WLAN after firmware upgrade

    I upgraded the firmware on my RE1000 to v1.0.02 a few days ago; now, the RE1000 will not connect to my WLAN.  The automatic CD program is useless; it won't see my WLAN.  Manual configuration goes slightly better, but still no luck.  If I try to connect via Wireless --> Site Survey, it sees the SSID (and a few others in range) and says it's connecting, but when I go to Status --> WLAN Statistics the status of the link is shown as down (router also confirms no DHCP lease given out).  When I try to configure the connection manually via Wireless --> Basic Wireless Settings, same results -- link down.
    I've tried configuring a static IP (vice DHCP) but no change in result.  One odd thing I've noticed is that in the WLAN Statistics page, "Wi-Fi Protected Setup" is still showing as "On" despite it being set to off.  Not sure if that has anything to do with it, but either way this is getting wretchedly annoying...

    I am trying to set up a LInksys RE-1000 for a user who has a working Linksys WRT-54G wireless router which is working perfectly fine both wirelessly and wired. This RE-1000 product was purchased after checking the RE-1000 owner's manual PDF download which confirms it is supposed to work with Wireless-N, G and B though with slower speeds with G and B.
    However, the RE-1000 does not connect to the WRT-54G at all using manual configuration with a network cable connected to the RE-1000. After entering all the correct parameters under the WIRELESS - BASIC WIRELESS SETTINGS page that matches the WRT-54G wireless security settings fully, the RE-1000's STATUS - WLAN STATISTICS page simply continues to show that the RE-1000 is "CONNECTING..." but never goes to CONNECTED status. Checking the RE-1000's STATUS - DEVICE INFO page shows that IP address, subnet mask and default gateway are all 0.0.0.0, which seems to confirm there is no successful connection between the RE-1000 and the WRT-54G via wireless-G band.
    The firmware on the RE-1000 is already 1.0.02 from factory. Calling Linksys phone support was useless because the phone agent in the Philippines simply gave pre-scripted generic suggestions such as upgrading the firmware on the RE-1000 and the WRT-54G, when the WRT-54G's firmware was already updated to the latest available version.
    Can anyone from confirm whether the RE-1000 is capable of connecting to the WRT-54G wirelessly? Or does the RE-1000 require specific wireless routers to connect successfully with? I did not notice that the product / system requirements stated anything about this.
    My experience so far with the RE-1000 wireless extender product has been unsatisfactory so far and I am an advanced user with the Linksys router.

  • Ipad 2 can not connect to server after 2 day internet outage

    Situation:
    Internet access was down 2 days and was just restored
    Restarted router
    iPad 2 connected to appropriate wifi network, but got error message "could not connect to server" when using Safari. Also, could not access any other internet related service like web email.
    Other devices --- iPad air, Mac, PC laptop and 2 iPhone 4s ---- were able to connect and access internet successfully.
    Actions Taken:
    Powered off iPad 2 and then restarted it. No luck.
    On iPad 2, turned off wifi setting and then turned it back on. It connected to appropriate network, but still could not connect to server.
    Reset router again --- no luck.
    Question:
    Any suggestions?

    Try the following:
    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings
    3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo

  • Not connected to internet after sleep

    Hi my Macbook Pro 13" early 2011 is not instantly connecting to the internet after sleep. I goto network diagnostics, all green lights are on, it says your internet is working fine, I click on a bookmark, it says I'm not connected. I repeat this two or three times, and finally after clicking on the third or fourth bookmark, it connects. I'm on Sky broadband UK through an Airport Express and my iPhone, Android (eeurgh!) 'phone, other computers and PS3 all connect with no problems. Any ideas folks?
    Also whilst I'm here, I've noticed software update has downloaded the same EFI firmware update four times, and that other software updates are available immediately after updating software.... Something I'm not used to? And, during restart, the computer beeps. Normal?
    Regards
    mackers

    Well, thanks to Carolyn Samit from San Francisco I think I found the answer by deleting Cache.db from Safari prefs in the library... Haven't been on these boards for a few years now - forgot how to use them! Anyway, if anyone can help with the software update repeats before I search the answer that'd be great thanks!
    Hi, nice weather
    mackers

  • Attendant Console could not connect to server after upgrade

    All,
    I upgraded a BE CUCM/Unity Connection server from 6.1.2.1000-13 to 6.1.4.2190-3 and after the upgrade, the AC client software could not connect to the CUCM server.  After checking all of the obvious things and rebooting the computer on which AC client was running, I finally figured out a workaround.  The CUCM server was configured with a host name of UCM1 and a domain of localdomain.  The AC clients were pointing to UCM1.  If I added a record in the client's hosts file (%WINDIR%\SYSTEM32\DRIVERS\ETC\hosts) which pointed UCM1.localdomain to the IP address of the CUCM server and then pointed the AC client to UCM1.localdomain, everything worked great.  I'm just wondering why this happened.  The client must pass the name of the server in the payload (rather than simply using the name to resolve to an IP address).  So why, all of a sudden, does the server care about the FQDN?  Just curious if anybody knows or has run into this same issue.
    Regards,
    Steven

    Hazel,
    Any chance you could send me a Wireshark capture of the traffic coming to/from one of the affected client PCs during the login process?  Also, please include any log files in the client's AC application folder (or sub-folders) as well as event log data from the system and application event log for the timeframe spanning slightly before and after the login attempt.
    Also before doing any of this please clear the DNS and ARP cache of the client PC:
    ipconfig /flushdns
    arp -d *
    Regards,
    Steven

  • Could not connect to server after OS got blue screen, Pls help.

    Hi Expert,
    i want to ask about this error.
    when i'm trying to log in in BO Universe designer.
    I'm getting this error.
    [repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(Unable to log on: Could not connect to server ekawati-f4e1e59:6400.  Please check that the server name is correct, and that the server is running.
    (hr=#0x80042a01)
    service database and BO is already running.
    it's happening after my os got blue screen.
    does blue screen affect that much to BO?
    how to solve it?
    Please advise.
    Thanks.
    Regards,
    Y Permana.

    Thanks for your replied.
    I checked in manage servers, the [BO server].connectionserver is stopped.
    After i checked in services, the database(MySql) service can't turned on if the CMS service is already running.
    is that ever happen in your experience?does it happen to other database?
    Could you tell me, what priority to turned services whether database, CMS or BO server?
    Thanks.
    Regards,
    Y Permana.

  • Safari and iTunes not connecting to internet after 10.5.3 but firefox does

    Hi,
    My first post ever. I just updated to 10.5.3 from 10.5.2 After the update, I can not connect to the internet using Safari. I get an error message that I have no internet conection. I ran the network diagnostics and everything was reported as working correctly. I also ran a repair permissions from disc utilities. Still can not connect with Safari. I also noticed that itunes can not download any podcasts. My "software update" in system perferences can not connect either. Firefox has no problem going online.
    Any suggesttions on how to proceed?
    Thanks

    Also worked on 10.4.11. I installed an Airport Express and updated all the software and firmware on my MacBook. After Safari, Itunes store, Google earth could not connect but Firefox was connecting fine. Followed your tip. Disableing the proxies on the Network config does the trick. Very simple but very helpful, thanks.
    JC

  • Lenovo Y50 Not connecting to Internet after windows 10 update

    Just as the title says.
    I was able to install some windows 10 updates with wifi as my usb modem would not work
    After that i can't connect to the internet. I can connect to wifi and it shows internet access but i can't still connect to internet.
    One funny thing though i typed ipconfig in cmd and no ip address was found it shows something like media no connected.
    All my drivers are upto date. Downloaded directly from lenovo website. And they are all working perfectly according to device manager

    Also worked on 10.4.11. I installed an Airport Express and updated all the software and firmware on my MacBook. After Safari, Itunes store, Google earth could not connect but Firefox was connecting fine. Followed your tip. Disableing the proxies on the Network config does the trick. Very simple but very helpful, thanks.
    JC

Maybe you are looking for