1131 AP Shows as having "other" antenna in the WCS

I just installed 5 lightweight 1131 ap's, two of them show up as having " other " as the antenna type in my WCS , the others show as having Ajax-Omni. They all have the same code and were installed at the same time. Also I can't get a het map profile from the " other " listed AP's. Can anyone help?
Thanks
Bill

1. You can go to Monitor Map ---> Campus ---> Select Building ---> Select Floor ---> From the drop down menu select command, choose "Position AP" and Go .
2. Click on the problematic AP's 1131 and select the correct Antenna type as being "AJAX-OMNI" which the image should match for AIR-LAP1131AG-A-K9.
3. Click Save and the heat map should start to populate.
4. From Floor Settings, select Access Points --> Protocol "802.11b/g/n" or 802.11a/n but not both. It's has to be one or the other else the heat maps will not display.
5. From Floor Settings ---> AP Heatmaps --> Contributing APs, Select ALL the APs and OK.
-nael

Similar Messages

I tried to download from the app store. It will not download. It shows up under "other purchases" but the action button is blank. I have tried to re-download it and it won't let me do that either. Any suggestions?

Mavericks will not download from the app store. It shows up under "other purchases" but the action button is grey and will not allow me to install, uninstall or redownload. I meet the system requirements but nothing is working. Any help would be appreciated!

There is nothing wrong with my iTunes, is more of the App store that I am concerned about. And I've tried the "Authorise this computer" yes it does download when using iTunes, but no luck with App Store. And, yes I am logged onto iTunes when doing purchases.
I find this really fustrating because the App store works fine on my ipod but once it comes to my macbook, it does not download. A few seconds later after I click on an app to download, the pop up message notifies me that the purchase cannot be downloaded.
Anyways, thanks for your suggestion.

How do i transfer photos from ipad to computer. Ipad was synched to other computer and photos dont show anywhere else other then on the ipad. i cant get them onto the computer

I have photos on my ipad which were from my old laptop. when Synched to my new laptop they dont transfer or show anywhere else other then on my ipad.
Its like they are stuck in the icloud but i cant see them there either.
I just want to get them from the ipad to the computer.
Doing my head in!
Help me

Hello whetnall,
After reviewing your post, I have located an article that can help in this situation. It contains helpful advice concerning photo and video transfers:
iOS: Import personal photos and videos from iOS devices to your computer
http://support.apple.com/kb/ht4083
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

When I fill fields on a form and ask to print using form fields only, the infomation doesn't show up. Other people in the office use the same form with no problem. Using XI standard.

I have a fillable form that is used by everyone in the office. When the fields are filled we print using the form fields only option to print on our invoices. When I go to print it in Acrobat XI standard using the form fields only option, none of the information I filled shows up or prints. No one else in the office has this problem. Does anyone know why I can't do this, but other people can?

I have a fillable form that is used by everyone in the office. When the fields are filled we print using the form fields only option to print on our invoices. When I go to print it in Acrobat XI standard using the form fields only option, none of the information I filled shows up or prints. No one else in the office has this problem. Does anyone know why I can't do this, but other people can?

How to share music on a single computer document doesn't show music in other account on the computer

Hello. I have 2 accounts on my Windows 7 computer and want both to access the same library. I have followed the instructions for sharing the iTunes Media folder to the public folder. I have moved the path appropriately on both accounts. However, while the account where I initially installed iTunes sees the library in the public folder and when iTunes is open sees the entire library, the other computer account doesn't see anything. Any insights?

In regards to iTunes content, an iPhone can be synced or manually managed with music and video with an iTunes library on a single computer only. When transferring iTunes content from another computer, all iTunes content on the iPhone that was transferred from a different computer will be erased from the iPhone first. The same applies to photos transferred from a computer.
To avoid this, you need to transfer your iTunes library from your old computer to your new computer following the instructions included with this link.
http://support.apple.com/kb/HT1751

Using public google calendars and having others subscribe on the Iphone.

I recently created a public calendar in google. I have sent the ics link out to all those who want to see it and most have subscribed to the calendar.
If the others want to get alerts when there are changes made to the calendar, how does that work? Can I do this in the google calendar? Does the iphone user do it on their end? Can this not happen with a public calendar?
Thanks for any insight.

Posted in the wrong place! I've reposted it in iCal forums.

I have a 3rd generation iPad running iOS7.0.2, and since updating to iOS7, it will not mirror to an AppleTV. The devices will connect, but the video monitors show only a blank screen. The AppleTV's work fine with various other iOS & OSX devices. Ideas?

I have three AppleTV's where I work. I have two at home. I have an iPhone 4S running iOS7.0.2 which mirrors smoothly via AirPlay. I have a 2011 MacBook Pro and a 2011 iMac, both running Mountain Lion, both of which mirror smoothly through AirPlay. I have a 3rd generation iPad running iOS7.0.2, and since updating to iOS7, it will not mirror. The iPad will connect to the AppleTV, but the TV's and projectors only show a black screen when connected: the iPad screen looks as it should, except that the transitions become jumpy when connected via AirPlay. This is true on both networks: at home and at work. Another gentleman using the network where I work has the most recent iPad, also running iOS7.0.2, and he is having the same problem. I have tried to "Reset All Settings." I have tried to "Restore." Does anyone have any suggestions? Has anyone else experience difficulty mirroring the iPad through AirPlay since the release of iOS7.0.2?

No problems exists with the router (on either network described above) or the multiple AppleTV's which are able to mirror multiple other OSX & iOS devices seamlessly. The problem is strictly with the iPad and iOS7.
The following information was helpful:
Big Apple fan
Re: AirPlay with AirServer connectivity problem
Oct 14, 2013 9:43 AM (in response to ceb2652)
This is an iOS 7 AirPlay mirroring bug...
To make matters worse, the iPad automatically drops its mirroring session 45 seconds after it auto-locks.
3-4 mirroring sessions is all it takes for the iPad mirroring to freeze up.
After this happens, mirroring to an Apple TV only projects a blank screen.
Once the mirroring is hung, the only way to fix it is to restart the iPad.
Apple please fix this iOS 7 issue!

Since the most recent Firefox update 3.6.8 by banking institution no longer shows as having a secure encrypted connection, however, my bank assures me all is well with their certificates and that is a problem with the new Firefox browser update, can you g

Since the most recent Firefox update 3.6.8 my banking institution no longer shows as having a secure encrypted connection, however, my bank assures me all is well with their certificates and that is a problem with the new Firefox browser update, can you give me some idea why it is doing this?
== This happened ==
Every time Firefox opened
== Right after the new Firefox update

Hello Anne.
Can you please try it in a new (temporary) Firefox profile and see if the issue is still present? See [http://support.mozilla.com/en-US/kb/Managing+profiles this article] to know how to create a new Firefox profile. Please report back the results.

TS4001 Bookmarks are not syncing to ONE of my Macs, but showing up on other Mac (work), iPhone 4 and iPad 1. Macs are on Mountain Lion. Tried all of Apple's suggestions - and the one Mac is still not updating/syncing Bookmarks or Reading List. What's goin

Bookmarks are not syncing to ONE of my Macs, but showing up on other Mac (work), iPhone 4 and iPad 1. Macs are on Mountain Lion. Tried all of Apple's suggestions - and the one Mac is still not updating/syncing Bookmarks or Reading List. What's going on? Do I have to wait to OS update? It seems lots of peolple were having issues before ML, but I as fine. Since ML, I am having all kinds of issues!

Yeah, I literally have tried everything except deleting my iCloud account (I'm close, but that would require so many changes that it is way too painful to consider at this point).
I am still waiting to hear back from Apple Support. Hopefully something can be done, or they can do a reset on their end.
Thanks for taking the time to respond though, much appreciated!

CP7 Rollover images Show up every OTHER slide

I am using CP7 and I have a number of graphics on slide 1 that I have defined to have a 'rest of project' timing. I have made multiple groups of graphics on slide 1 and I have made them to NOT be 'visible in output' this way, when I need them, I can use advanced actions to hide/show them (by group name) when I need them for subsequent slides. I am using slide 1 for this instead of the master slide because I need to define the stacking of graphics fairly specifically (slide 3 and further have some graphics that need to be in front of some things and behind some other things).
The set up is that I have a smart shape with a graphic and I am using it as a button on slide 1 (NOT visible in output and lasts for rest of project). Overlayed over top of my smart shape/button is a rollover image. The two objects work just like a rollover button you would see on the web. There is an advanced action that opens the group that the button is a part of and a few other graphic groups that I need to make it look good. When you click the button, there is another advanced action that is supposed to hide the group that both of those graphics are in, plus the other graphics that make it look good, and then go to the next slide. There is an advanced action on the next slide OnEnter that shows the what is needed for the beginning of the next slide.
So, here's the problem. When I click my button, everything disappears and goes to the next slide EXCEPT the rollover graphic, which stays on the screen and on top of all other graphics in slide 2. The SAME EXACT advanced action is used on slide 2 to go to slide 3 (with the same exact button because they are all really on slide 1 the whole time and just being made visible or invisible). When I click, I go to slide 3 and the rollover graphic is gone. I click the button again (to go to slide 4) and I go to slide 4 but the rollover graphic is BACK AGAIN!
I know that this is a complicated write-up, and I am going to go start from scratch to see if I can replicate the problem with a stripped down version of the advanced actions in a new file, but I am hoping someone can point me in the right direction about what is going on. I have deleted and re-inserted the rollover image, but it still does the same thing. I have re-coded the advanced action and it still does it. I have copied rollover images that DONT have this weird glitch and it still does it.
Anyone have any ideas?

I found a 'workaround' to this problem, but I would still like to know what is going on underneath to make this happen. Since I have all the rollover graphics on the first slide with timing or 'rest of project' I just made an animated button in Flash and imported it as a .swf to replace the rollover image. I changed the smart shape underneath from having the image of the button to being transparent (still have it being used as a button with all the same advanced actions as before). Now the swf handles the rollover and the transparent smart button underneath handles the OnClick action and everything works great.
Not sure what was going on with the rollover images, but at least I was able to get the result I needed.

Anyone having an issue with the SD TV show option not working in iTunes Store?

SD TV shows are not available to purchase, I can only get the HD shows. Is anyone else having this problem?

I'm having the same problem and am quite frustrated. I have quite a few season passes for different TV shows, but they are all for the SD versions (cheaper, smaller, and quicker to download). I can get to the TV show's download page, but only the HD version shows up. I can see the button for the SD version but when I click on it nothing really happens, or the only thing that happens is that the "HD" symbol after the name of the TV show at the top of the page disappears. But even though the "HD" symbol next to the TV name is gone, the episodes are all still only available to download as HD versions. The problem isn’t just that it’s only the HD versions that are available but I already paid for the SD season passes. And I'm not going to pay more money to download the HD version, I don't want, just because the iTunes store has a glitch.
So I really hope that Apple fixes this soon.

I want to show labels having images one by one in Panel

i want to show labels having images one by one in Panel through a while loop...
I made an ImagIcon array.
It doesn't work properly.
It shows only first image while the variable is incrementing. :(
This is my code...(Plz check it....)
import java.awt.*;
import javax.swing.*;
public class test extends JFrame
ImageIcon imgIco = new ImageIcon("mylogo.jpg");
ImageIcon imgIco1 = new ImageIcon("mylogo1.jpg");
ImageIcon imgIco2 = new ImageIcon("mylogo2.jpg");
ImageIcon imgIco3 = new ImageIcon("mylogo3.gif");
ImageIcon imgIco4 = new ImageIcon("mylogo4.gif");
ImageIcon[] a = {imgIco,imgIco1,imgIco2,imgIco3,imgIco4};
JButton b1 = new JButton("Add");
JLabel l1;
JPanel p1 = new JPanel();
public test(String title)
super(title);
int s = 0;
while(s<=4)
     try
          Thread.sleep(100);
          System.out.println(s);
          l1 = new JLabel(a[s]);
          repaint();
     /*if(s==1)
          p1.remove(l1);
     catch(Exception e)
     System.out.println("Error Occured!!!");
     p1.add(l1);
System.out.println(s);
s++;
     setContentPane(p1);
public static void main(String args[])
     test t = new test("Title");
     t.setSize(900,470);
t.setVisible(true);
t.setResizable(false);

You are sleeping the thread used to perform the repaint.
Calling repaint only marks a component as needing painting, and AWT will paint it later. If you continue to loop in the mainthread then you will not see the changes.
You have to move your loop to another thread.

HT1245 Why does my caller I.D. photos show as a small thumbnail in the upper right corner and not full screen? I have used both photos I have synced and photos I have taken, yet others have full screen photo I.D.'s.

Why does my caller I.D. photos show as a small thumbnail in the upper right corner and not full screen? I have used both photos I have synced and photos I have taken, yet others have full screen photo I.D.'s. I have looked onlime at several threads and there are no real answers as to what I need to do or am doing wrong.

I am also having this issue.
I've just spoken to someone in the Apple Support Centre who advised me that since the product is in beta, he is unable to assist. I wanted to find out whether someone was able to delete the data for me, or 'reset' the photos app somehow. This apparently cannot be done. He suggested I provide feedback via the feedback page, which I will do, but to be honest doesn't fill me with a lot of confidence in the issue being fixed.
I also deactivated the service and waited the 30 days for the pictures to be deleted - this should have been completed in mid-January. Instead, my iCloud.com Photos page is now showing the photos that should have been deleted as grey squares, just as you described. I am also unable to delete these photos; every time I try, I get the same message about a server error.
I am also unable to disable the service by enabling and then disabling it on my iPhone. Each time I have tried this it hangs on uploading for several hours, with the progress bar not moving at all. When I disable it on my iPhone, the web app remains unchanged.
If anyone has had this issue and has managed to fix it, PLEASE share your wisdom. I am out of patience!

WCS not showing AP type or antenna choices

When I look at the config for some of my AP's they are showing under the Inventory Information AP Type Unknown. Also, when I go the radio interface for b/g and try to change the external antenna from Other to the 5959 antenna, there is no antenna's listed at all.
I looked at other AP's that are working and they show AP Type as LWAPP and have all the antenna choices listed as well.
The WLC version is 4.2.112 and the WCS version is 4.2.81.
I found this problem after changing some of the AP's to manually set the channel assignment. I then went to look at the heat map for all the AP's in one building and nothing shows up, just the AP's with no color heat map. I did reset the AP's with no change.
Thanx, Seth

Was not seeing any error messages. I was just not able to get the heat map to generate. Also, I could not choose the correct antenna that was connected to the AP because the AP type was showing up wrong.

I have problems with syncing my events folders från MacBookAir to Ipad2. Some pictures show and not others?

I have problems with syncing my events folders från MacBookAir to Ipad2. Some pictures show and not others?
Anyone else having this problem?

Try deleting the photo cache from your computer and then re-try the photo sync and see if they then copy over - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314

1131 AP Shows as having "other" antenna in the WCS

Similar Messages

Maybe you are looking for